REPAIR TO CHARPOYS (ALL TYPE) AND RECANNING OF CHAIRS (ALL TYPE) UNDER GE CLEMENT TOWN

Amount

CHAIR DINING FD-279/228

Taking down old u/s Rear leg and M&L for new leg made out of 1st class teak wood all as specified in drg and as directed.

Taking down old u/s Front Leg and M&L for New leg made out of 1st class teak wood all as specified in drg and as directed.

Taking down old u/s Side Rail and M&L for New Side Rail made out of 1st class teak wood all as specified in drg and as directed.

Taking down old u/s Front or Back Rail and M&L for New Front or Back Rail made out of 1st class teak wood all as specified in drg and as directed.

Taking down old u/s Bottom Stiffener and M&L for New Bottom Stiffener made out of 1st class teak wood all as specified in drg and as directed.

Taking down old u/s Back Strip and M&L for New leg made out of 1st class teak wood all as specified in drg and as directed.

M & L for removing old/worn out rubber shoes with S & F new Rubber/PVC shoe of superior quality with steel plated screws of suitable size complete all as specified and directed.

Removing old/unserviceable cane from chairs and M & L Re-canning of Chair Dining in Godrej pattern with oval shape 2 mm wide new white plastic cane and 4 mm wide at the edge make as approved by GE including taking out old canning complete all as shown on drawing and as directed.

M& L for Polishing two coats to new and old surfaces of Chair Dining after repair with french polish of approved quality including preparation of all surfaces complete all as specified and as directed.

CHAIR WRITING FD-202,250,280

Taking down old u/s Rear leg and M&L for new leg made out of 1st class teak wood all as speicified in drg and as directed.

Taking down old u/s Front Leg and M&L for New leg made out of 1st class teak wood complete all as specified in drg and as directed.

Taking down old u/s Side Rail and M&L for New Side Rail made out of 1st class teak wood all as specified in drg and as directed.

Taking down old u/s Front or Back Rail and M&L for New Front or Back Rail made out of 1st class teak wood all as specified in drg and as directed.

Taking down old u/s Bottom Stiffener and M&L for New Bottom Stiffener made out of 1st class teak wood all as specified in drg and as directed.

Taking down old u/s Back Strip and M&L for New leg made out of 1st class teak wood all as specified in drg and as directed.

M & L for removing old/worn out shoes S & F new Rubber/PVC shoe of superior quality with steel plated screws of suitable size complete all as specified and as directed.

Taking down old u/s Arms Rest and M&L for New Arm rest out of 1st class teak wood all as specified in drg and as directed.

Removing old/unserviceable cane from chairs and M & L re-canning of Chair wrting in Godrej pattern with oval shape 2 mm wide new white plastic cane and 4 mm wide at the edge make as approved by GE including taking out old canning complete all as shown on drawing and as directed.

M& L for Polishing two coats to new and old surfaces of Chair wrting after repair with french polish of approved quality including preparation of all surfaces complete all as specified and as directed.

CHAIR EASY (FD-229/ 201/281)

Taking down old u/s Rear leg and M&L for new leg made out of 1st class teak wood all as speicified in drg and as directed.

Taking down old u/s Front Leg and M&L for New leg made out of 1st class teak wood complete all as specified in drg and as directed.

Taking down old u/s Side Rail and M&L for New Side Rails of seat made out of 1st class teak wood compleat all as specified in drg and as directed.

Taking down old u/s Front or Back Rails of seat and M&L for New Front/Back Rail of seat made out of 1st class teak wood complete all as specified in drg and as directed.

Taking down old u/s side Rail Back and M&L for New side Rail back made out of 1st class teak wood complete all as specified in drg and as directed.

Taking down old u/s Top/Bottom Rail Back and M&L for New Top/Bottom Rail of back made out of 1st class teak wood all as specified in drg and as directed.

Taking down old u/s Front Support Rail and M&L for New Front Support Rail made out of 1st class teak wood all complete all as specified in drg and as directed.

M & L for removing old/worn out shoes S & F new Rubber/PVC shoe of superior quality with steel plated screws of suitable size complete all as specified and as directed.

Taking down old u/s Arms Rest and M&L for New Arm rest made out of 1st class teak wood complete all as specified in drg and as directed.

Removing old/unserviceable cane from back of chairs and M & L for re-canning of back seat Chair easy in Godrej pattern oval shape 2 mm wide new white plastic cane and 4 mm wide at the edge make as approved by GE including taking out old canning complete all as shown on drawing and as directed.

Removing old/unserviceable cane from seat of chairs and M & L for re-canning of seat Chair easy in Godrej pattern with oval shape 2 mm wide new white plastic cane and 4 mm wide at the edge make as approved by GE including taking out old canning complete all as shown on drawing and as directed.

M& L for Polishing two coats to new and old surfaces of Chair easy after repair with french polish of approved quality including preparation of all surfaces complete all as specified and as directed.

CHARPOY GI PIPE WITH PLYTOP (FD-220(R))

Removing of unservicable long rail and Supply and Fixing new long rail of GI tubing 32 mm bore medium grade (ISI marked) duly threaded both ends all as specified in drg and as directed.

Removing of old unserviceable short rail and making of short rails from long rails obtained from item No. 4.(a) and threading the both ends of short rails and fixing in position complete as specified in drg and as directed.

Removing of old unserviceable legs and making of legs from short rails obtained from item No. 4(b) and threading the both ends of legs and fixing in position complete as specified in drg and as directed.

Removing of unserviceable 3 way elbow and S & F new GI elbow 32 mm dia ISI Marked as specified in drg and as directed.

Removing of unserviceable check nuts and S & F new 32 mm dia GI Check nut (thickness of check nuts shall not be less than 8 mm) complete all as specified in drg and as directed.

Replacement of old ply top and S & F New plywood top size 1980x900 mm , 12 mm thick BWR Grade ISI Marked Confirming to IS -303 ( Make Green Ply/Century/Archid) top including dismantling of old unservicable top without disturbing the other parts, made to shape & size as shown on drawing, tightening of loose components and the edges of ply shall be covered with half round beading of Ist class teak wood of size 12mmx6mm thick all round duly polished with french polish of best quality complete all as specifed and directed. It also includes replacement of old nuts and bolts 75 mm long 5 mm dia semi circular top with nuts and two washers complete all as specified and directed.

Replacement of old /unserviciable stiffner and S&F new stiffner of MS section 900mmx40mm x5mm with suitable semi circular nut bolts all as directed by Engr-in - charge. Before fixing stiffner shall be painted two coats with synthetic enamel paint Black over a coat of red oxide primer complete all as specifed and directed.

CHAIR CB STEEL (FD-75(M))

Removing old u/s broken seat and S&F new seat of existing size with 50 mm thick foam 40D cushion pasted over 12 mm thick BWR plywood & seat surface covered with leatherite rexine cover 2mm thick & screwed to track rail complete all as specified and directed.

Removing old u/s broken back and S&F new back of existing size with 50 mm thick foam 40D cushion pasted over 12 mm thick BWR plywood & seat surface covered with leatherite rexine cover 2mm thick & screwed to track rail complete all as specified and directed.

S&F MS flat iron 25mm x 3mm and 50 cm (approx) long to steel frame below seat and behind back to support seat/back duly welded to steel frame including removing out existing cleat/flat iron complete all as specified and directed.

Taking out old damaged/decayed Arms rest and S&F new Arm rest made of IInd class hardwood and fixing with suitable size screws, complete all as per drg and as directed.

Taking out old unserviceable top cap from its posn and S&F new top cap best quality in the same position complete all as specified and directed.

S&F conduit pipe (02 Nos in each chair) 18/19 mm dia 1.6 mm thick, 500 mm (approx) long at the rear end between back and base of the chair CB steel duly welded, complete all as specified and directed.

M&L for painting to exposed surfaces of steel frame of chair CB Steel with two coats of synthetic enemal paint best quality after preparation of steel surface by scraping and rubbing down with sand paper, including applying a coat of primer on all the new surfaces complete all as specified and directed.

CHAIR Verandah (FD-359)

M & L for Welding to broken steel frame of chair Verandah by welding complete all as specified and directed .

Taking down old unserviceable cane and Re- -canning of Chair Verandah with oval shape 4mm wide new plastic cane make as approved by GE. Rest all as shown on drawing and as directed.

Taking down old unserviceable shoes and S & F rubber/PVC shoes to to leg of chair Verandah complete all as specified and directed.

M&L for spray painting two coats of synthetic enamel white paint complete ater prepartion of surface by scrapping and removing dust dirt etc including denting as required complete all as specified and as directed.

CHAIR CBA SPECIAL WITH HAND REST (FD-120 (M))

Taking down old unserviceable cane of seat and back and Re- -canning of seat and back of Chair CBA special with handrest with oval shape 2 mm wide new plastic cane make as approved by GE- Rest all as shown on drawing and as directed.

Removing old unserviceable wooden plank and S&F new hand rest made of 12 mm thick 1st class teak wood all as specified and shown on drg.

Taking down old unserviceable shoes and S & F new hard rubber shoes superior quality to leg of chair CBA special with hand rest complete all as specified and directed.

M&L for preparation of old painted iron & steel surfaces of chair CBA special with handrest by scraping & rubbing down with sand paper, removing dents & scratches, if any filling the same with paste fillet and spray painting one coats of synthetic enamel paint(1st grade quality) (Colour shade as approved by GE ) over a coat of red oxide primer complete after preparation of surface all as specified and directed. M& L for Polishing two coats to new and old wooden surfaces of Chair CBA special with hand rest after repair with french polish of approved quality including preparation of all surfaces complete all as specified and as directed.

NOTE : (Applicable for all items):- (i) The bidders/contractors are advised to read relevant Contract drawings and Particular specifications, Key specifications, Special conditions and General conditions of Contracts before entry/quoting the rates. (ii) The items are to be manufactured as per relevant drawings and specifications and supplied to the Department.

M/SDoon furnishers

avtarsinghchaddha