Loading…
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Tender Value
Refer Docs
EMD Value
₹81,660
Closing Date
24 Dec 2025, 4:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Er. Syed Ishfaq Ahmad
Office of the Executive Engineer RnB Anga
Construction of Office Building for PGS India Facilitation Centre at Bijbehara District Anantnag (Public Sector) under HADP Project Alternate Agriculture System for Sustainability 2025-26.
2025_PWDJK_298641_1
NIT 122 of RnB/Ang/2025-26/10290-99, Dt 18/12/25
Open Tender
Civil Works
Percentage
500 days
Bijbehara
Please refer Tender documents.
4 documents required · 4 mandatory
₹1,100
Executiver Engineer rnB Division Anantnag
₹81,660
19 Dec 2025
19 Dec 2025
26 Dec 2025
19 Dec 2025
24 Dec 2025
19 Dec 2025
Earth work in excavation by mechanical means in trenches for foundations, drains & cables etc not excdng 1.5m in width & 10 sqm on plan depth upto 1.5m disposed earth to be levelled & neatly dressed all kinds of soils
Providing & Laying of stone soling (dully hand packed)including watering dressing and ramming with all carriages loading un- loading and stacking etc complete
Providing & laying in position cement concrete of specified grade excld. The cost of centring and shuttering all work upto plinth level(1:4:8 coarse sand 40mm nominal size crushed stone agg.)
P / L in position specified grade of reinforced cement cencrete excld. The cost of centring, shuttering, finishing and reinforecement-All work upto plinth level. 1:1.5:3 graded stone agg. 20mm nominal size
Reinforced cement conc. Work in beams, suspended floors roofs having slope upto 15 deg. Landing balconies, shelves, lintels upto floor 5 level excld. Centring, shuttering in 1:1.5 :3 20mm stone agg Nominal size
Providing & laying in positiond shutter concrete of specified grade excld. The cost of centring and shuttering all work upto plinth level(1:2:4 coarse sand 20mm nominal size crushed stone agg.)
Centring and shuttering incld. Strutting, proping etc & removal of form work for Founadtions, footings, bases of columns for mass concrete
Centring and shuttering incld. Strutting, proping etc & removal of form work for suspended floors, roofs, landings, balconies & access plateform
Brick work with common burnt clay (non modular)bricks of class designtion 7.5 in foundatio and plinth including curing in cement mortar 1:4 (1 cement :4 coarse sand)
Providing wood work in frames of doors, windows, clerestory windows & other frames, wrought framed & fixed in position Imported wood
Providing & fixing 30 mm thick panelled or panelled & glazed shutters for doors & windows and clerestory windows including ISImarked black enamelled M.S Butt hingeswith necessary screw excluding panelling Imported wood
Providing & fixing of decorative plywood both sides decorative veneer (Type 1) confirming to IS 1328 BWR type
Providing & fixing 35mm thick wire gauze shutters using galvanised MS wire aperture1.4mm wire dia 0.63mm for doors & windows and clerestory windows incld bright finished/black enamelled M.S Butt hinges with necessary screws First class Kail wood
Providing & fixing of 40x5mm flat iron hold fast 40cm long including fixing to frameswith 10mm dia bolts nuts & wooden plugs and embedding in cement conc block 30 * 10 * 5c 1:3:6mix (1cement:3coarse sand:6 graded st agg)20mm nominal size
15mm Cement Plaster on the rough side of single or half brick wall lof mix 1:6(1 cement:6 fine sand)
Providing & fixing 4 mm thick Glass pans (Wt not less than 10 Kg / Sqm i/c cost of wooden beading
Providing and applying white cement based wall putty 2mm thick over plaster surface
Applying priming coat with ready mixed Pink or grey primer of approved brand and manufacture on WOOD work (hard or soft wood)
Painting with synthetic enamel paint of app. Brand & manufacture to give an even shade 2 or more coats on new work
Reinforcement for RCC work incld straightning, cutting, bending, placing in position & binding all complete (TMT bars of grade Fe- 500D or more.)
Providing hardware fixtures to shutters of doors and windows
Tower bolt 100mm Length
Handles 100mm
Handles 150mm
L Drop of approved make
Cement Concrete flooring 1:2:4 (1 cement: 2 coarse sand: 4 graded stone agg) finished with a floating coat of neat cement incld. cement slurry but excld the cost of nosing of steps etc complete 50mm thick with 20mm n / s stone agg crushed
Providing and laying Vitrified tiles in different sizes (thickness to be specified by manufacturer), with water absorption lessthan 0.08% and conforming to 1.5. 15622, of approved make, in all colours and shades, in skirting, riser of steps, over 12mm thick bed of cement. mortar 1:3 (1cement: 3 coarse sand), including grouting the joint with white cement and matching pigments etc. complete 600x600 size
Supplying and filling of RBM under floors including watering ,dressing ,ramming under floors with all leads and lifts including all carriages loading , unloading and stacking complete .
Structural steel work welded in built up sections, trusses and framed work, soffits, eaves boarding and like including cutting, hoisting, fixing in position and applying a priming coat of appro steel primer all complete:
Providing/Fixing of HI-Rib colour coated sheet roofing fixed with polymer coated J or L hooks bolts & nuts 8mm dia with bitumen & Gi limpet washers upto(a pitch of 60 degree) excld cost of perlins, rafters & tresses 0.63mm thick with zinc coating not less than 275g/sqm 0.50 mm Thick
Providing ridges of hips of width 60cm overall width plain colour GS sheets fixed with polymer coated Jor L hooks bolts & nuts 8mm dia GI limpet & bitumen washers complete 0.63mm thick with zinc coating not less than 275g / s * qm
Dry RR masonry with hard stone from quarry using i / c all carriages complete
Providing & fixing of PVC conduits / Junction Boxes, Bends as per requirment at site of standard make and manufacture complete as per directions
PVC Conduits 20mm dia i/c Bends
Light Conceiled Junctions
Fan Junction Box
Providing and fixing of following size of PVC (Prince make) Fitting ISI Marked
100 mm dia door tee
100 mm dia plain bend
100 mm dia collar
100 mm dia P trap
100 mm dia door Bend
100 mm dia plain Tee
100 mm pvc prince cliff
75mm dia Door Bend
75mm dia Door Tee
75mm dia Plain Bend
75mm dia collar
75mm dia floor trap
75mm PVC Prince Cliff
75mm dia PVC Cowel Caps
50mm dia PVC Elbow
50mm dia PVC Tee
Providing and fixing of following size of PVC (Prince make) Pipe including C/O (B-Type, specified adhesive.
100mm dia Pipes PVC Prince
75mm dia Pipes PVC Prince
50mm dia Pipes PVC Prince
Providing, laying and fixing heavy duty Glass Fibre reinforced PPR (Polypropylene Random- Copolymer) pipes & Fittings of approved quality with solvent weld socket joints and necessary (female Elbow fittings brass thread) such as sockets, back nuts, elbows, bends, tees, reducers, enlargers, plugs, clamps, Transition Bushing, unions etc. including necessary excavation, backfilling, fixing with clamps, drilling holes in walls, slabs & making the surface good with hydraulic testing complete job
20 mm dia
25 mm dia
Supply, installation, testing and commissioning of gunmetal, male or female threaded isolation control valve (Ball Valve), of approved quality confirming to IS 778, PN 10, with necessary specials, unions, nipple etc., to complete the job.
20 mm dia
25 mm dia
Providing and fixing white vitreous china pedestal type water closet (European type W.C. pan) with seat and lid, 10 liter low level white P.V.C. flushing cistern, including flush pipe with manually controlled device (handle lever), conforming to IS:7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required: W.C. pan with ISI marked white solid plastic seat and lid.
Providing and fixing of CP Health Faucet 900 mm long complete of standard make.
Providing and fixing CP 2 in 1 Bib Cock heavy (Standard make)
Providing and fixing low level PVC Flushing cistern (8-100)ltrs capacity
Providing and fixing of vitreous wash basin with MS brackets complete of standard make.
Providing and fixing of vitreous Pedastal complete of standard mak
Providing and fixing CP short body Bib Cock heavy (Standard make)
Providing and fixing CP long body Bib Cock heavy (Standard make)
Providing and fixing CP Angle valve (Standard make)
Providing & Fixing 15 mm dia C.P Wall mixer of approved quality (Non telephonic) of standard design and of approved make complete including C.P. wall flange, cutting and making good the walls wherever required.
Providing and fixing CP waste Coupling
Providing and fixing PVC Waste pipe
Providing and fixing of 6" geyser bolts of standard make
Providing and fixing of CP Grating with Anti Cockroach trap below the grating hinge type.
Providing and fixing 15mm dia 2"- 3" long CP nipples
Providing and fixing looking Mirror (Belgium Type)
Providing and fixing CP Soap case.
Providing and fixing PVC connection pipe upto 24" long.
Construction of Brick masonry manholes using 2nd class bricks in 1:6 mix including plastering /CI frame with cover, Complete Job of following sizes.(for library,septic tank and soakage pit)
Providing and fixing 0.6 H.P. Motor/ Pump from Reservoir tanks to over head tanks of standard make complete job incl power supply & MCB for control.
Providing , installation, commissioning and testing Hot water Geyser of approved make (Venus, Racold, Jaguar or equivalent) including fixing with bolts and making necessary connection 35 litre
Provision for electrification including wiring conduits MCBs connction complete job
Heating Point
Lighteing point
Providing and placing on terrace (at all floor levels) polyethene water storagge tank ISI : Marked 12701 with cover sutable locking arrangement and making necessary holes for inlet, outflow of water
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 0.71 MB
BOQ_968072.xls
BOQ • 0.39 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .