Supply and Fixing of Street Light and Poles for various places in area of Nagar Palika Itawa.

Amount

Supply and erection of Octagonal pole of following length and dimension as per table-3 with base plate on the cement concrete foundation of M-15 /M-20 grade (1:1.5:3) with the help of anchor bolts of grade 6.8 (IS1367 P-III). The pole shall be made of S-355JO grade steel sheet, folded lengthwise to obtained Octagonal shape, having single longitudinal seam weld and hot dipped galvanised internally & externally in accordance with IS 2629. The pole shall have a weatherproof flush door and locking arrangements. The complete work shall be supervised and certified by the manufacturers for satisfactory supply, erection, testing and commissioning. Group-I, 8 Mtr.

P&F 240/415 V MCB of breaking capacity not less than 10 KA (B/ C/ D tripping characteristic) ISI marked IS 8828(1996)]/ conforming to IEC 60898 in existing board/sheets including making connections with lugs, testing etc. as required. Group-I. 6 A to 32 A rating

Maintenance free gel earthing with pipe in pipe /Strip in Pipe technology filled with anti corrosive conductive compound (CPRI tested) below the ground in 150-200 mm dia earth pit and surrounding filled with required mineral filling compound (MFC should have hygroscopic proper ty to retain the moisture for long time to create low resistance Zone) and C.C. finished chamber covered with hinge type with locking arrangement C.I cover. C.I. frame of size 300mm×300mm complete testing of earth resistance as required of following sizes With pipe in pipe technology (inner pipe dia / outer pipe dia) 80 -100 micron G.I. coating G.I. pipe 3000 mm long, 80/40 mm, terminal 14 mm G.I. strip Group-I.

S & Laying following size earth wire/strip in horizontal or vertical run in ground/surface/recess including riveting, soldering, saddles, making connection etc. as required. 25 mm×3mm GI strip Group-I.

Providing & Laying XLPE insulated / P.V.C. sheathed cable of 1.1 KV grade with aluminium conductor Armoured of IS:7098-I/1554-1 approved make in ground as per IS:1255 including excavation of 30cm×75cm size trench, 25 cm thick under layer of sand, second Class bricks covering, refilling earth, compaction of earth, making necessary connection, testing etc. as required of size. Group-I.

10.0 Sq. mm 2 core

16.0 Sq. mm 4 core

50.0 Sq. mm 4 core

Supplying and making one end termination with heavy duty single compression brass gland SIBG type, copper lugs duly crimped with crimping tool, PVC tape etc for following size of Armoured PVC insulated & PVC sheathed/ XLPE aluminium conductor cable of 1100 volt grade as required of size. Group - I

10.0 Sq. mm 2 core

16.0 Sq. mm 4 core

50.0 Sq. mm 4 core

SITC of Cutting back up surface up to 2 Mtr. Depth by digging by Bogie including all layers of crust for laying pipe line etc. and making good to original condition (excluding cost bitumen) Group - I

Providing and laying XLPE/PVC insulated & PVC sheathed Un-armoured control cables of 1.1 KV grade with copper conductor as per IS 1255 including excavation of 30 cm × 75cm size trench 25 cm thick under layer of sand and second Class bricks covering Group - I. 3C × 2.5 sq.mm

P/ F IP-65/ IP-66 protected street light luminaries on existing bracket. Fixture made from powder coated single piece pressure die cast aluminum housing with heat dissipation fins on housing with high power LEDs Diffuser / glass cover for ensuring IP-65 protection for lamp and control gear compartment, system lumen output of 100 lum/watt high power LED. Integrated driver shall be high efficiency having efficiency more than 85% and in compliance to IEC standards. System life of 50000 burning hours with 70% of initial lumens maintained. Fixture shall be in CE compliance. Group-I. LED street light fixture 110-120 watt

S& F of all in one solar LED street light fixture with Integrated high efficient Monocrystalline panel with Lithium (LiFePO4) Ferro Phosphate battery with BIS approved make luminaire should be secondary optic lenses for better distribution with delivered efficacy of > 100 Lumen perwatt. Bidder shall have in house R&D Laboratory which is recognised by ministry of Science & Technology department, Govt. Of India/NABL. Bidder shall have inhousepole & luminaire manufacturing facility. Luminaire can be supplied with Hybrid switch along with indicator to understand the source of power (either from solar or AC supply) shall have certificate tested from MNRE approved Lab. Guarantee for total system is two years. Note: All the above should be integrated and should be 1 system. Compact Solar LED Street Light - 90W(MONO) 18V/12.8V 42Ah/60W Group - I

S & Laying following size ‘B’ Class G.I. Pipe confirming to IS: 1239 P-1 (1990) with accessories for laying earth conductor/ strip/ cable in ground/ surface/ recess as required 50 mm dia Group - I

MAIN CUBICAL PANEL / STREET LIGHT CONTROL PANEL P/F testing & commissioning of kiosk type weather proof out door main cubical panel size 750 mm × 1250 mm × 500 mm (app.) made out of 14 gauge MS sheet front and back both side openable duly hinged door with locking arrangement by providing both side held draft and all required hard wares. The cubical should be dust and vermin proof followed by coat of zimpholite primer and finally two coats of enamel gray paint. The cubical should be mounted with hard ware on angle iron frame size 50 × 50 × 6 mm and 1500 legs duly painted framed be grouted 750 mm below ground level with cement concrete 1:3:6 in 1000 × 500 × 600 mm and providing brick masonary along angle iron frame above G.L. They shall be in two section comprising as follows:

(i) Providing & Fixing 415V ,TP combination double break HRC switch fuse unit 100 Amp. rating for incoming supply with HRC fuse 100 Amp rating and of BCH/L&T/EE/ Siemens/ ABB make. (ii) Providing fixing timer switch TSQ 100 series 240 Volts, and full running service standard mounting with base of L & T or equivalent make including the cost of contactor 63 amp. 50 Hz. 440/400 volt. (iii) P/F open busbars 25mm×3mm of required length duly covered by heat shrinkable sleeves with busbar supporters (iv) Provision for residual current operated 63 Amp. 1 Pole ELCB of 30MA to 300 MA sensitively as required including making connections etc. (EE/Load stop make)

(v) P/F 2 Nos. 415 Volts TPN combination double break switch fuse unit, 63 Amp. Rating with HRC fuses (EE/mds/ SCHNEIDER bch/Siemens) for outgoing cable and making connection etc. also to have a provision for two nos. above switches. (vi) P/F of 3 nos. RYB phase indicator resistance type complete with lamp P/F of HT danger plate of size 200 × 150 mm made of aluminium sheet 20 gauge. (vii) P/F cable glands double compression type and Al. lugs duly crimped for incoming cable and out going Cables. (viii) Providing 2 Nos. earth terminals including lugs and H/W duly inter connected with 8 SWG copper wire. (ix) Inter connection of main busbar to each out going switch and cable terminal shall be with 4 sqmm PVC copper conductor duly crimped with AL lugs. (x) Cable termination shall be fixed at backside of the panel with H/W and spring washers (xi) Light control switch with photo senser complete unit as required Group - I

Supply, Erection and Fixing of hot dipped galvanised Overhang (60×3.25 mm) with cap (250×137.9×4.05 mm) over the existing poles Group-I

Single arm overhang

Double arm overhang

Jain Trading Company