REPAIR/ MAINTENANCE OF INTERNAL WIRING, SWITCHES, SOCKETS INCLUDING LED FITTINGS ETC IN JCO/ OR ACCN UNDER GE (ARMY) TRIVANDRUM

Amount

Taking down copper/ aluminium point wiring (light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fitting etc. removing materials from site after accounting in credit schedule and making good disturbed surfaces of walls, floors, etc. complete all as specified and directed.

Taking down main switches, DBs with sheet metal enclosure 4/ 8 way SPN/ TPN MCB, MCCB DBs complete all as specified and directed.

M&L for point wiring complete for one light point controlled by one switch with 1.5 sqmm single core PVC insulated unsheathed FRLS cable 1100 volts grade with multistranded, copper conductor through PVC casing and capping 20/ 25 mm size with accessories with modular metal flush boxes of suitable size & modules, concealed in walls with modular white plated cover as top cover fixed with screws for housing switches, socket outlets, fan regulators etc, including provision of 1.5 sqmm nominal cross sectional area, PVC insulated, FRLS, unsheathed, 1100 volt grade, multistranded single core green colour copper conductor for earth continuity connected to earth dolly complete all as specified and directed. NOTE: Cost of modular metal flush boxes concealed in wall with suitable white cover plate for mounting switches/ sockets, regulators, bell push etc and cost of cutting chases & making good to disturbed surface with cement mortar, if required any shall be deemed to be included in the quoted rate.

All as per SI item No. 3.00 here-in-before, but for One fan point controlled by one way switch complete all as specified and directed.

All as per SI item No. 3.00 here-in-before, but for One exhaust fan point controlled by one way switch complete all as specified and directed.

All as per SI item No. 3.00 here-in-before, but for One 5 pin socket outlet, 6 Amps on the same board with other switches, with cables 1.5 sq. mm size complete all as specified and directed.

All as per SI item No. 3.00 here-in-before, but for One 5 pin socket outlet, 6 Amps, independent, with cables 1.5 sq. mm size complete all as specified and directed.

All as per SI item No. 3.00 here-in-before, but for One bell/ buzzer point controlled by one push button on independent with cables 1.5 sq.mm. size complete all as specified and directed.

All as per SI item No. 3.00 here-in-before, but for one switch socket outlet, 3 pin 6 Amp and 3 pin 16 Amp on independent board with 4.00 Sqmm FRLS cable and 4.00 sqmm cable earth continuity wire complete all as specified and directed.

S&F switch piano, flush type single pole, one way 6 Amp complete all as specified and directed.

S&F Socket outlet 5 pin, 6Amp, flush type complete all as specified and directed.

S&F Switch socket combination 2 in 1, 3 pin 6 Amp and 3 pin 16 Amp flush type universal complete all as specified and directed.

S&F Bell push, flush type, 5 Amp complete all as specified and directed.

S&F in repairs switch piano, flush type single pole, one way 6 Amp complete all as specified and directed.

S&F in repairs bell push, flush type, 5 Amp complete all as specified and directed.

S&F in repairs socket outlet 5 pin, 6Amp, flush type complete all as specified and directed.

S&F in repairs switch socket combination 2 in 1, 3 pin 6 Amp and 3 pin 16 Amp flush type universal complete all as specified and directed.

S&F in repairs modular socket 3 pin 6Amp and 3 pin 16Amp multipurpose, complete all as specified and directed.

S & F stepped type electronic fan regulator flush type on the existing phenolic laminated sheet etc. as reqd. complete all as specified and directed.

S & F in repairs stepped type electronic fan regulator flush type on the existing phenolic laminated sheet etc. as reqd. complete all as specified and directed.

S&F ceiling rose, 3 phase/PVC/ polycarbonate, isolated body complete all as specified and directed.

S&F calling bell, AC, 230 volts, single pole complete all as specified and directed.

S&F distribution board made out of sheet metal enclosure (CRCA sheet powder coated), dust and vermin proof, double door, for enclosing/ fixing MCCB, TPN 4 way, 415 volts grade with 200 Amps insulated rated bus bar with nickel plated brass, isolated neutral bar and door earthing, earth bar IP- 43 protection with poly urethane (PU) gasketing, IK-08 Mechanical impact resistance, door earthing flush to wall, including testing complete all as specified and directed.

S&F in repairs MCCB, four pole, 100 Amp, 415 volts, 50 Hz, having thermal setting range 70% to 100% and adjustable magnetic setting and breaking capacity 16 KA including making incoming and outgoing connections complete all as specified and directed.

S&F in repairs MCCB, four pole, 63 Amp, 415 volts, 50 Hz, having thermal setting range 70% to 100% and adjustable magnetic setting and breaking capacity 16 KA including making incoming and outgoing connections complete all as specified and directed.

S&F distribution board made out of sheet metal enclosure (CRCA sheet powder coated) dust and vermin proof, double door, for fixing enclosing/ fixing SPN 8 way, 415 volts grade with 200 Amps insulated rated bus bar with nickel plated brass, isolated neutral bar and door earthing, earth bar IP- 43 protection with poly urethane (PU) gasketing, IK-08 Mechanical impact resistance, door earthing flush to wall, including testing complete all as specified and directed.

S&F MCB single pole 5 to 32 Amps current carrying capacity, 240 volt rating, 10 KA, C curve with IP-20 protected terminals including contact indication window, IP-20 protection, energy limitation Class-3, airflow channels on both sides, bi-connect terminals etc., complete with connection, testing and commissioning complete all as specified and directed.

S&F MCB single pole and neutral 32 Amps current carrying capacity, 240 volt rating, 10 KA, C curve with IP-20 protected terminals including contact indication window, IP-20 protection, energy limitation Class-3, airflow channels on both sides, bi-connect terminals etc., complete with connection, testing and commissioning complete all as specified and directed.

S&F MCB single pole and neutral 40 to 63 Amps current carrying capacity, 240 volt rating, 10 KA, C curve with IP-20 protected terminals including contact indication window, IP-20 protection, energy limitation Class-3, airflow channels on both sides, bi-connect terminals etc., complete with connection, testing and commissioning complete all as specified and directed.

S&F sub-main wiring with 2 runs of 6 sqmm single core PVC insulated, FRLS, unsheathed cable with stranded copper conductor, 1100 Volts grade drawn through and including PVC casing and capping with all fitting such as Tees, Bends, Elbows, etc., fixed surface on wall/ ceiling including 6 Sqmm multistranded PVC insulated, FRLS, copper conductor cable as earth continuity conductor and connecting to common earth dolly including taking down old unserviceable sub-main wiring complete all as specified and directed. NOTE: Two runs of 6.0 sqmm copper cables and one run of 6.0 sq mm copper cable along with white colour PVC casing and capping with accessories will be measured as one unit length.

Taking down carefully existing serviceable Ceiling fan/ Wall mounted fan including removing cable end connections, etc. and removing the fan for keeping in safe custody, re-hanging the ceiling fan with down rod after rewiring including clamps, hooks, hold fasteners etc and connecting up, including making electric connection from ceiling rose or connector to fan complete all as specified and directed.

Taking down carefully existing serviceable exhaust fan including removing cable end connections, etc. removing the fan for keeping in safe custody, re-fixing the exhaust fan connecting up after rewiring, including making electric connection from ceiling rose/ connector to fan complete all as specified and directed.

S&F in repairs wall lamp 1 x 4 Watts with light frosted glass, chrome finish, warm white, body dark grey colour, aluminium die-cast with IP-65 protection including LED bulb complete all as specified and directed. Make: Jaquar cat No. JNL-CHR-MB160275211A (E27 LED 4W * 1) or equivalent make of Philips/Bajaj/Wipro/Osram/GE/Havells/HPL

S&F in repairs smart extruded aluminium LED batten-tube (4ft) with higher efficacy 1x 20W, 220V, AC decorative box type with driver, warm/cool white (as directed by Engr-in-Charge), double sided connection, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and directed. Make: Bajaj Cat No. BCLAB 20W LED P or equivalent make of Philips/Bajaj/Wipro/HPL

S&F in repairs LED batten-tube light fittings 1 x 20 Watts, 220V, AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and directed. Make: Jaquar cat No. LGLZPCX020XC or equivalent in Philips / Bajaj / Wipro / Osram / GE / Havells / HPL.

S&F LED batten-tube light fitting 2 feet, 10 watts, 220 V, AC decorative type with warm/cool white (as directed by Engr-in-Charge), driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size complete all as specified and directed. Make: Jaquar cat No. LGLZ01X010XC or equivalent make in Philips / Bajaj / Wipro / Osram / GE / Havells / HPL.

M&L for Earthing complete with galvanised steel earth plate electrode 60 cm x 60 cm x 6.3mm thick buried directly in ground vertically to a depth not less than 2.25 metre below ground level with top edge of earth plate at a depth of not less than 1.5 metre below normal ground level, connected to galvanised earth lead of GI wire of size 4mm dia by means of GI Bolts, Nuts, check nuts and washers of the earth and thimbles and other end of the earth GI wire connected to earthing test point and protected by galvanised iron pipe light grade 15mm dia from earth plate to Panel/DBs and water pipe 20mm dia GI medium grade raised up to a level of 50cm above ground level with plug at top, earthing pit in PCC (1:3:6) type C-1 RCC pre-cast (1:2:4 type B-1) cover slab of 50 mm thick using 8.00mm dia CTD bars reinforcement both ways at 140 mm centre to centre with handle, 20 mm dia GI pipe medium grade for watering pipe, wire mesh, funnel and providing charcoal or coke and salt in alternative layers of 15 cm including necessary earth work in soft/ loose soil, returning, refilling and removing of surplus soil to a distance not exceeding 50 mtr testing complete all as shown in electrical plate No-3 of MES Schedule Part-I of SSR-2009 complete all as specified and directed, including taking down existing unserviceable earthing complete all as specified and directed.

M&L for Earth continuity conductor or main earthing lead fixed to wall on batten or recess or chases or buried in ground or drawn in conduit/ pipe or fixed to poles or any other indicated situation for loop earthing etc. as required 4mm dia galvanised iron or steel wire complete all as specified and directed.

S&F in repairs sheet steel metal enclosure single pole and neutral enclosure with a two pin and earth plug and socket complete including one single pole MCB SP 20 Amp, 240 volts complete all as specified and directed.

S&F in repairs LED batten-tube (double side connection) ultra bright glass LED tube of capacity 18 Watts, 230 V with high efficacy for installation in existing fittings all as specified and directed. Make: Jaquar cat No. LTBL01X018XW or equivalent make in Philips / Bajaj / Wipro / Osram / GE / Havells / HPL.

S&F in repairs wall lamp 1 x 7 Watts with light opal glass with nickel finish, warm white, body dark grey colour, aluminium die-cast with IP-65 protection including LED bulb complete all as specified and directed. Make: Jaquar cat No. JNL-NKL-WLRB0480E27 (E27 LED 7W * 1) or equivalent make of Philips / Bajaj / Wipro / Osram / GE / Havells / HPL.

S&F in repairs LED batten-tube light fitting 2 feet, 10 watts, 220 V, AC decorative type with warm/cool white (as directed by Engr-in-Charge), driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size complete all as specified and directed. Make: Jaquar cat No. LGLZ01X010XC or equivalent make in Philips / Bajaj / Wipro / Osram / GE / Havells / HPL.

SUPER COOL

JESWIN BUILDERS

M/s VJ ENTERPRISES

SUJAN