Loading
Loading…
Loading…
Tender Value
₹15.3 L
EMD Value
₹38,400
Closing Date
12 Oct 2026, 11:00 am
AE In Charge
Office of the Assistant Executive Engineer Central Mechanical Sub Division I Kerala State Electricity Board Limited Pallom Kottayam
Target for the year 2026-27- Fabricating 7000 nos 3m Channel cross arm85 nos 3.15m Channel Cross Arm 20000 nos LT Stay Clamp 9166 nos HT Stay Clamp and 60000 nos LT Stayrod in CM Division Production shop Pallom
2026_KSEB_873005_1
08/AEE/CMSD1/2026-27 dtd 26.09.2026
Open Tender
Miscellaneous Works
Percentage
CM Sub Division 1 Pallom
Please refer Tender documents.
3 documents required · 3 mandatory
₹5,900
Yes
₹38,400
26 Sept 2026
26 Sept 2026
15 Oct 2026
26 Sept 2026
12 Oct 2026
26 Sept 2026
This is a percentage-rate BOQ. The schedule below shows estimated quantities and rates. Bidders quote a single percentage above or below the total estimated cost.
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount |
|---|---|---|---|---|---|
| 1 | Fabricating 3.0m channel cross arm using MS channel 100x50mm (departmental free issue), cutting to 3m length and 22mm dia.drillied/punched holes 7 Nos as per Board's specification and drawing including gas cutting, levelling and stacking the finished products & scrap at suitable place as per the direction of the departmental officers etc. complete. (Charges inclusive of cost of labour & consumables, such as cutting gas, LPG,drill bit, punch & die etc.) | 7,000 | Each | 58.25 | ₹4,07,750 |
| 2 | Fabricating 3.15m channel cross arm using MS channel 100x50mm (departmental free issue), cutting to 3.15m length and 22mm dia.drillied/punched holes 7 Nos as per Board's specification and drawing including gas cutting, levelling and stacking the finished products & scrap at suitable place as per the direction of the departmental officers etc. complete. (Charges inclusive of cost of labour & consumables, such as cutting gas, LPG,drill bit, punch & die etc.) | 85 | Each | 61.16 | ₹5,198.6 |
| 3 | Fabricating LT stay clamps for LT stay rods of 312 mm long using 50 x8 mm MS Flat (departmental free issue) as per design and drawing including cutting, bending, punching 2 Nos 18mm dia holes and stacking the finished products as per the direction of departmental officers. (Charges inclusive of labour, shearing tool, punch & die etc. complete.) | 20,000 | Each | 7.38 | ₹1,47,600 |
| 4 | Fabricating HT stay clamps for HT stay rods of 315 mm long using 50 x8 mm MS Flat (departmental free issue) as per design and drawing including cutting, bending, punching 2 Nos 18mm dia holes and stacking the finished products as per the direction of departmental officers. (Charges inclusive of labour, shearing tool, punch & die etc. complete.) | 9,166 | Each | 7.38 | ₹67,645.08 |
| 5 | Fabricating stay rod of length 1.70m for LT lines using 16mm dia M S rods as per design including marking shearing, leveling, threading one end to a length of 5 cm suitable to nut of diameter 5/8" making a round hook in the other end and welding the joint and stacking the finished products at suitable places in such a manner that the items can be easily countable in numbers, as per the direction of departmental officers etc. complete. ( Charges including of labour , cost of welding electrode and consumables). | 60,000 | Each | 15.09 | ₹9,05,400 |
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 0.60 MB
tenderdocuments.pdf
Tender Documents • 1.71 MB
BOQ_1480741.xls
BOQ • 0.30 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .