Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹4.0 LAccepted-AOC VILLAGE PO BARMAR TEHSIL JAWALI DISTT KANGRA HP | L1 | Accepted-AOC accept | |
| 2 | L2₹4.5 L+₹35,000 (8.43%)Rejected-Finance HAMIRPUR ROAD NEAR BUS STAND UNA DISTT UNA HP | UNA | HIMACHAL PRADESH | 174301 | L2 | Rejected-Finance reject | |
| 3 | L3₹6.3 L+₹2.2 L (52.7%)Rejected-Finance GOVT CONTRACTOR VILLAGE PO RAJA KA TALAB TEHSIL FATEHPUR DISTT KANGRA HP | KANGRA | HIMACHAL PRADESH | 176001 | L3 | Rejected-Finance reject | |
| 4 | L4₹6.5 L+₹2.3 L (55.6%)Rejected-Finance VPO BARI TEHSIL FATEHPUR DISTT KANGRA HP | KANGRA | HIMACHAL PRADESH | 175013 | L4 | Rejected-Finance reject | |
| 5 | L5₹6.8 L+₹2.6 L (63.7%)Rejected-Finance | L5 | Rejected-Finance reject |
| Sl No | Description | Qty | Unit | SS ENGINEERING WORKS L2 | Aman Deep L4 | ARADHYA ELECTRICAL WORKS L5 | KULDEEP DOGRA L3 | SUBASH CHAND L1 |
|---|---|---|---|---|---|---|---|---|
| 1.00 | Supply of horizontal spindle,horizontal/radial split casing and suction (backpull out arrangement) single/ double / multistage centrifugal pumps or combination of pumps in series /parallel of Kirloskar modal RKB40/14H stages 3, (25 HP) conforming to BIS: 1520-1980 (latestwith upto date ammendments) read with BIS: 9137-1978 (latest edition) suitable for lifting water of under mentioned charactristics with impellers of bronze/suitable alloy, priming funnels,casing ring & shaft sleeves of bronze/ suitable alloy, shaft of sutable steel grade with cast iron casing coupled directly through a flexible coupling on a common C.I. / Cast steel base plate (base plate to be from the principle manufacturer of pumping set) to slippering/squirrel cage screen protected drip proof electric induction motor of Kirlokar /NGEF/Crompton / Siemen /Jyoti /BHEL /GEC /ABB conforming to BIS: 325-1978 read read with BIS: 900-1968 (latest with upto date ammendments) It should include the cost of bearings, nuts & bolts,painting etc. and shall be suitable for operation as per data given below. | 1 | set | 3,75,000 ₹3,75,000 | 5,35,000 ₹5,35,000 | 5,65,000 ₹5,65,000 | 5,25,000 ₹5,25,000 | 3,25,000 ₹3,25,000 Lowest |
| 2.00Location of the siteThe site is located at a distance of 40 Kms fom Ranital Road Railway Station. | ||||||||
| 3.00The altitude ofof place in which= Altitude of place is 500 Mtr above above mean Sea Level the motor is intended to work. | ||||||||
| 4.00Type of current. = AC three phase supply with frequenty of 50 cycles per second. | ||||||||
| 5.00Rate voltage = 415 V +/- 10% | ||||||||
| 6.00Characterstics of water:- (a) Temperature=20 Degree C (b) Turbidity= Upto50 NTU © Hardness= Mg/Ltrs(as Caco3) (d) Alkalinity= Mg/Ltr(as Caco3) (f) PH=7 to 8 (g) Total solids- Mg/Litre (h) Other | ||||||||
| 7.00Depth of Collection tank = Positive suction. | ||||||||
| 8.00LWL of collection tank 450 mtr | ||||||||
| 9.00Maximum draw down level 450 mtr | ||||||||
| 10.00Centre level of pump 450Mtr | ||||||||
Tender Value
₹4.9 L
EMD Value
₹9,885
Closing Date
29 Dec 2025, 11:00 amClosed
EE
Jal Shakti Division Jawalamukhi
Improvement of distribution system of LWSS Khundian centrifugal pump
2025_HPIPH_123886_1
JAM-KNG02-742
Open Tender
Civil Works
Item Rate
90 days
Jawalamukhi
Please refer Tender documents.
8 documents required · 8 mandatory
₹500
EE Jawalamukhi
₹9,885
Yes
18 Feb 2026
19 Dec 2025
29 Dec 2025
19 Dec 2025
29 Dec 2025
19 Dec 2025
Supply of horizontal spindle,horizontal/radial split casing and suction (backpull out arrangement) single/ double / multistage centrifugal pumps or combination of pumps in series /parallel of Kirloskar modal RKB40/14H stages 3, (25 HP) conforming to BIS: 1520-1980 (latestwith upto date ammendments) read with BIS: 9137-1978 (latest edition) suitable for lifting water of under mentioned charactristics with impellers of bronze/suitable alloy, priming funnels,casing ring & shaft sleeves of bronze/ suitable alloy, shaft of sutable steel grade with cast iron casing coupled directly through a flexible coupling on a common C.I. / Cast steel base plate (base plate to be from the principle manufacturer of pumping set) to slippering/squirrel cage screen protected drip proof electric induction motor of Kirlokar /NGEF/Crompton / Siemen /Jyoti /BHEL /GEC /ABB conforming to BIS: 325-1978 read read with BIS: 900-1968 (latest with upto date ammendments) It should include the cost of bearings, nuts & bolts,painting etc. and shall be suitable for operation as per data given below.
Location of the siteThe site is located at a distance of 40 Kms fom Ranital Road Railway Station.
The altitude ofof place in which= Altitude of place is 500 Mtr above above mean Sea Level the motor is intended to work.
Type of current. = AC three phase supply with frequenty of 50 cycles per second.
Rate voltage = 415 V +/- 10%
Characterstics of water:- (a) Temperature=20 Degree C (b) Turbidity= Upto50 NTU © Hardness= Mg/Ltrs(as Caco3) (d) Alkalinity= Mg/Ltr(as Caco3) (f) PH=7 to 8 (g) Total solids- Mg/Litre (h) Other
Depth of Collection tank = Positive suction.
LWL of collection tank 450 mtr
Maximum draw down level 450 mtr
Centre level of pump 450Mtr
Discharge level of highes point= 549mtr
No of pumps requried 2 Nos pump set
Capacity= 6.00 LPS for each pump
Total head in mtr= 130.00 mtr
Length of R/main= 1180 mtr
Dia of Rising main:- 65mm dia GI pipe
No. of working hours per day= 8.00 Hours.
Limits of pump operation:- (-) 15% (+) 10 % of total head.
HP of motor/Drive unit:- Required 20 HP of pump at (+) 10% and (-) of total head.BHP with following margins/multiplying factor at duty point, whichever is higher. (a) upto 2 HP=1.5, (b)2 to 5 HP-=1.4, (c ) 5 to 10 HP=1.3, (d) 10 to 20=1.2 HP, (e) 20 to 100=1.15, (f) Above 100 HP =1.10
Test Run= 16 Hours Continueously for 7 days.
Proviidng and fixing automatic panel board of L&T make incluidng auto start, auto stop and re-start facilty single phse preventor, 3 phase indicator, timer ,relay selwctor switch auto and manualy start stop fcility overload and fixed M-Power for mibile use complete in all respect.
Erection of all equipment from Sr.No.1 to 2 including cost of tees, bends, tapers and any other fitings required as per site conditions and as per direction of the Engineer in charge.
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Tendernotice_1.pdf
PDF • 0.52 MB
Form6.pdf
Tender Documents • 0.42 MB
TC.pdf
Tender Documents • 0.52 MB
BOQ_182050.xls
BOQ • 0.28 MB
Form8.pdf
Tender Documents • 0.81 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .