Repairs to Tithal Valsad Dharampur Hunda Nasik Road Km. 44/4 to 50/6 & Motapondha Faliya Road Km. 0/0 to 3/0 Ta. Nanapondha, Dist. valsad (Providing Bitouminious Patch Work / Paver Patta)

1 Providing and laying 37.50mm thick compacted B.M. with B.T. aggregate as 153.45 M.T. 3594.59

per MORT&H specification using Emulsion RS1 grade for tack coat at

Kg./10Sq.mt. with mechanical sprayer and bitumen grade VG-30 for mixing at

the rate 34.0Kg/M.T. i.e. 3.4 % of total mix including heating the aggregate

and asphalt by drum mix plant and spreading the same by sensor paver

finisher and consolidation with vibratory roller including providing all

materials, equipments, tools and plants, oil, kerosene, fire wood, labour

charges etc. complete

2 Providing and laying 20 mm thick Mix Seal Surfacing using stone chips as per 267.95 M.T. 4798.51

MORT&H gradation using VG 30 grade for tack coat at 2.5 Kg./10Sq.mt.

with mechanical sprayer & 60/70 (VG-30) grade asphalt for mixing @ 5.00%

by weight of total mix for binder including heating the aggregate and asphalt

by drum mix plant and spreading the same by censor paver finisher and

consolidation with vibratory roller including providing all materials,

equipments, tools and plants, oil, kerosene, fire wood, labour charges etc.

3 Providing and applying asphalt painting on B.T. surface with mechanical 5660.00 Sq.Mt 46.29

sprayer using bitumen VG-30 at the rate of 5.00 Kg/10 Sq.mt. & spreading

stone dust on painting surface at the rate of 0.03 Cu.m./10 Sq.mt. and rolling

with smooth wheeled and pneumatic roller and brushing etc. complete.

Deputy Executive Engineer, Executive Engineer

Dharampur (R&B) Sub Division Valsad (R&B) Division

Dharampur Valsad

I/We am/are willing to carry out the work at ………………………………………………..% above/below

(percent should be written in figures and words) of the estimated rates mentioned above. Amount of my/our

tender works out as under.

*Estimated amount *Estimated amount

Put to tender Rs…2099400 Put to tender Rs…2099400

Deduct ……. % below Rs……………… Add ……. % Avove Rs…………..….

Net Rs. ……………… Total Rs. ………….…

In words ………………….…………………… In words ………………….

*( please strike out whichever is not applicable)

All works shall be carried out as public works department Handbook and other

specification of Division or as directed.

All the columns in schedule should be filled in ink or ballpen and the total of the

entries in last column should be struck by the contractor under his signature.

Rate quated include clearance of site (Prior commencement of work and at its close)

in all respects and hold good for work under all conditions,site moisture, weather etc.

The Contractor shall exhibit a board with detailed specification and details of work

as directed by the Engineer-In-Charge for which no extra payment shall be made.

The labour cess will be deducted as per prevailing rules i.e. 1% of the work done.

GST and Income tax TDS will be deducted at a source while making payments of bills

In all R.C.C. Items in Rate Analysis Standard Cement Consumption has been taken as per

Govt. G.R.: PRC-10/2017 Cement Consumption/16/C Date:11/05/2017 as stated in

S.O.R. therefore in R.C.C. items where there is a change as per actual mix design the cost

of difference of cement consumption have been deducted from the rate of original item at

the rate of input rate mentioned in all the tender.

To be continued on additional sheet,if found necessary.

Executive Engineer

Signature of the contractor Valsad (R&B) Division

ÀùËÿëÀËßÞí çèí Valsad