COMPREHENSIVE CONTRACT FOR ATTENDING DAY TO DAY MISC B/R AND E/M COMPLAINTS FOR ALL OFFRS/JCOs/OR MD ACCN UNDER THE AREA OF AGE B/R-I AT ARMY AREA JODHPUR UNDER GE (ARMY) NO. 01

Attending complaints in repair of bib taps , pillar taps, stop cock , angle valve ,wall mixture,WHB mixture,bib taps,two way bib taps, , etc of any description incl change of Rubber washer /Jumper sheet etc complete ( all items as washers,spindles,Rubber washer /Jumper sheet etc are included and would not be paid seprately.) complete all as specified and directed by Engr-in-charge.

Checking and attending complaints to carpenter work in repairs to joinery (PVC/ Wooden/ Steel/ Aluminium) doors & windows/ Aluminium mongery, pelmet box, door spring, rolling shutter, etc) required carpentary work and carrying out minor repair such as tighting to screws/nails, wire of false ceiling, easening of joinery, door spring etc including replacement of defective items/materials (screws, nails, wire of false ceiling) complete all as specified and directed by Engr-in-charge.

Checking and attending complaints to welding work in repairs to steel windows, handles, door springs, iron frame of doors, rolling shutter garragesa and other iron misc works, repair by welding un or defective items/material alongwith & including welding machine gloves, welding glass, welding rod any other tools requited, as per requirement, complete all as specified and directed by Engr-in-charge.

Checking and attending complaints to mason work in repairs to floor not more than 0.5 sqm, fixing of loose tiles, plaster not more than 1 sqm including painting, repair to chhajja, repairing of loose brick/stone maonry including labor and materials, complete all as specified and directed by Engr-in-charge.

S&F in repairs 150mm long aluminium barrel tower bolts of extruded section, complete all as specified and directed by Engr-in-charge.

S&F in repairs 200mm long aluminium barrel tower bolts of extruded section complete all as specified and directed by Engr-in-charge.

S&F in repairs 100 mm long aluminium anodised extruded handles fabricated type complete all as specified and directed by Engr-in-charge.

S&F in repairs 150mm long aluminium anodised extruded handles fabricated type a complete all as specified and directed by Engr-in-charge.

S&F in repair 300mm Mild steel barrel tower bolts, stove enamelled black, with bright bolt and fixed complete all as specified and directed by Engr-in-charge.

S&F in repairs 250 mm long aluminium anodised extruded sliding door bolts with hasp stapple (bolt type) and fixing clips of sheet cast or extruded sections and fixing bots, complete all as specified and directed by Engr-in-charge.

S&F in repairs for mild steel butt hinges 100 mm long ISI marked, medium weight cold rolled with necessary welding to iron chowkhat, complete all as specified and directed by Engr-in-charge.

S&F in repair Aluminium Door closer hydraulically regulated, designation No 3 universal type,suitable for door shutters of 851 to1000 mm in width and of weight between 61 to 80 Kg complete all as specified and directed by Engr-in-charge.

S&F in repair 140mm long floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor complete all as specified and directed by Engr-in-charge.

S&F in repair peg stay of suitable size for steel window/ ventilator etc. complete including necessary welding/ riveting etc. complete all as specified and directed by Engr-in-charge.

S&F in repair Mild Steel handle (left or right) for steel window of existing size including necessary welding / riveting etc. complete all as specified and directed by Engr-in-charge.

Repair to steel window / door / gate including necessary welding, riveting, easing, drilling, including replacement of new hinging device, handles, and making them in serviceable condition including taking down and re-fixing in same opening and making good distrubded surfaces as per existing complete all as specified and directed by Engr-in-charge.

Repair to aluminium window/door and replacement of unserviceable hinging device, handles, loose glass , rubber gasket, sercivicing of door closer/spring, oiling, greasing, remove all dust, making them in serviceable condition including taking down and re-fixing in same opening complete all as specified and directed by Engr-in-charge. Note: Hydraulic door closer, door spring, glass shall be measured and paid seperately.

S&F in repair for powder coated aluminium door seal 1000 mm long, 30 mm wide including dust/insect arrestor complete all as specified and directed by Engr-in-charge.

M&L for opening of air lock/blockage in GI pipe line from out let of water tank to all internal GI pipes fittings to smooth flow of water from Bib taps/shower rose/WHB pillar tap/Stop valves complete by Air pressure/ water gravity pressure etc. complete all as specified and directed by Engr-in-charge.

Cleaning and removing all scale and dirt etc from over head water tanks for capacity exc 250 ltrs but n exc 500 ltrs and from mouths of circulating pipe etc including dismantling & refixing at same or other place complete all as specified and directed by Engr-in-charge.

Cleaning and removing all scale and dirt etc from over head water tanks for capacity Exc 500 Ltrs but not exc 1000 Ltrs and from mouths of circulating pipe etc including dismantling & refixing at same or other place complete all as specified and directed by Engr-in-charge.

S&F in repair galvanised mild steel wire cloth 0.56mm nominal dia of wire and average width of aperature 1.40 mm, fixing with and including MS flat iron with galvanised wire stapples with and necessary welding, nut bolts etc. complete all as specified and directed by Engr-in-charge.

M&L in repair 18/19mm thick, prelaminated particle board, medium density, water and termite proof, having both side decorative choice lamination, interior grade fixed with screws to wooden frame work as in kitchen cabinet / cup board including taking down old shutter complete all as specified and directed by Engr-in-charge.

S & F in repair continuous [piano] hinges, mild steel, bright finish or electrogalvanised and width of Flaps 30mm [When Open] complete all as specified and directed by Engr-in-charge.

S&F in repair magnetic catches for cabinet of size 50 mm complete with striking plate and magnetic stud complete all as per approved sample, complete all as specified and directed by Engr-in-charge.

S&F in repair 40mm dia cupboards knobs fixed with nuts screw and washer of aluminium anodised, complete all as specified and directed by Engr-in-charge.

S&F in repairs MS peg set of any type fixed to wall , door, almirah etc with necessary screws complete all as specified and directed by Engr-in-charge.

S&F in repair bib tap with flange 15mm dia, chromium plated, brass, fancy type, screwed for iron pipe or for brass ferrule, complete all as specified and directed by Engr-in-charge.

S&F in repairs bib taps standard of PTMT any colour high pressure screwed for iron pipe & fixed (minimum weight 15 mm 90gm/each), complete all as specified and directed by Engr-in-charge.

S&F in repair 15 mm bore CP brass angle stop Valve, screwed down high pressure with crutch or butterfly handle scrwed both ends for iorn pipe complete all as specified and directed by Engr-in-charge.

S&F in repair 15 mm bore CP brass stop cock, screwed down high pressure with crutch or butterfly handle scrwed both ends for iorn pipe complete all as specified and directed by Engr-in-charge.

S & F in repair 15 mm bore pillar taps, brass, with capstan heads, chromium plated, screwed down high pressure with or without lettered Hot or Cold with long screwed shanks and fly nuts, screwed for iron pipe complete all as specified and directed by Engr-in-charge.

S&F in repairs to PVC Flexible waste pipe suitable for 32 mm to 40 mm dia waste coupling, with socket for steel sink/WHB upto floor level and length not less than 0.85 Mtr, complete all as specified and directed by Engr-in-charge.

S&F in repairs to waste cupling of PTMT 32 mm dia of min weight 45 gms (half or full threaded) for WHB fixed with solvent or cement, complete all as specified and directed by Engr-in-charge.

S&F in repairs to waste cupling of PTMT 40 mm dia of min weight 60 gms (half or full threaded) for Sink fixed with solvent or cement, complete all as specified and directed by Engr-in-charge.

Supply and fixing in repair 100 mm dia brass chromium plated over head jet shower rose with arm and wall flange complete all as specified and directed by Engr-in-charge.

S&F in replacement 10 ltrs capacity PVC valve less, syphonic action type, flushing cistern, low level, white with inlet, ball valve, float and handle including brackets, flush pipe of 32 mm dia, jointing WC, complete all as specified and directed by Engr-in-charge.

S&F in repairs for 20 mm bore of Ball valve high pressure of PTMT with epoxy coated aluminum rod & high density plastic ball screwed for iron pipe complete all as specified and directed by Engr-in-charge. (minimum weight 210 gms) Note: Necessary T&P as required shall be arrange & borne by contractor. Nothing extra shall be admissible.

S&F in repairs PVC connection 15 mm dia 600 mm long with brass fly nut at both ends, complete all as specified and directed by Engr-in-charge.

Repair/Replacement of PVC down pipe of low level flushing cistern including replacement of rubber bush and sealed with M-seal complete all as specified and directed by Engr-in-charge.

Dismantling of 500 ltr capacity water tank and remove to store complete all as specified and directed by Engr-in-charge.

Dismantling of 1000 ltr capacity water tank and remove to store complete all as specified and directed by Engr-in-charge.

S&F in replacement 500 ltrs capacity rotational moulded polythene water storage tank white colour, three layered (ISI marked) (Cylinderically vertical with closed top) hoisted and fixed in postion all as specified in SSR Part-I, complete all as specified and directed.

All as per item No.44.00 here-in-above, but capacity of tank 1000 ltr. complete all as specified and directed by Engr-in-charge.

M&L in replacement of 15mm PTMT hexagonal nipple for PVC water tanks, complete all as specified and directed by Engr-in-charge.

S&F in replacement vitreous ware wash down Anglo-Indian type water closet [Semi-Pedestal Pattern], white including plastic water closet seat back closed pattern with flat bottom and cover and mild steel chromium plated or aluminium hinging device and 'P' or 'S' trap connecting to drain pipe and flushing pipe etc., complete all as specified and directed by Engr-in-charge.

S & F in replacement white vitreous china squatting pan "Orissa pattern" of size 580 mm X 440 mm with integral foot rests and PVC 'P' or 'S' trap, including M&L brackets, flush HDPE pipe of 32 mm dia and PVC connection 15mm size, 450 mm long with PTMT nuts & fixing arrangement of cistern, including provision of cement concrete bedding 1:5:10 type E2 complete all as specified and directed by Engr-in-charge.

S&F in repairs stainless steel sink without drainage board,1.00mm thick for kitchen or laboratory with plug ,washers waste pipe , cast iron cantilever brackets connecting union overall size 495mmx420mm with bowl size 410mm x 330mmx160mm, complete all as specified and directed by Engr-in-charge.

S&F in repairs stainles steel sink with drainage board 1mm thick for kitchen, with plug, waste pipe, washers including bedding in cement mortar to dwarf wall or including fixing cantiliver brackets and connecting union to pipe overall size 915mmx460mm with bowl size 410mmx 330mmx160mm, complete all as specified and directed by Engr-in-charge.

S & F for vitreous china ware wash hand basin, white, flat back of size 450 mm X 300 mm including 32 mm dia brass chromium plated waste fittings with long screw shanks and fly nuts, flange end bedded in red led cement and other end fixed, rubber plug with rings including CI Brackets, cutting for and pinning in ends of brackets or erecting strand, 32mm bore PVC flexible waste pipe,PVC connection15mm size with PTMT nuts of length 300mm long complete all as specified and directed by Engr-in-charge.

S&F in replacement Pastel two Piece EWC Size : 550 x 360 x 390 mm with Soft Close Seat Cover, Hinges, Dual Flush Cistern Fitting, Fixing Accessories and Accessories Set,etc complete, S Trap- 300 mm, complete all as specified and directed by Engr-in-charge.

S&F in replacement snow white wash basin (Counter type)(size, shape, colour, model & make as approved by GE) with full pedestal including 32 mm dia brass chromium plated waste fittings with long screw shanks and fly nuts, flange end bedded in red led cement and other end fixed, rubber plug with rings including CI Brackets, cutting for and pinning in ends of brackets or erecting strand, 32mm bore PVC flexible waste pipe, hot braided PVC connection15mm size with PTMT nuts of length 300mm long complete all as specified and directed by Engr-in-charge.

S&F in replacement Concealed Stop Cock with all Fitting Sleeve, Operating Lever & Adjustable Wall Flange, 15mm dia complete all as specified and directed by Engr-in-charge.

S&F brass chromium plated soap dish, complete all as specified and directed by Engr-in-charge.

S&F in replacement stainless steel Toilet Roll Holder with Stainless Steel Flap, complete all as specified and directed by Engr-in-charge.

S&F in replacement Wall Mixer 3-in-1 System with both Hand Shower and Overhead Shower 150X150mm Squarel Shape Single Flow (ABS Body Chrome Plated with Gray Face Plate) with Rubit Cleaning System Complete with 115mm Long Bend Pipe (both are match with wall mixture), Connecting Legs & Wall Flange, chromium plated brass, fancy type 15mm dia complete all as specified and directed by Engr-in-charge.

S&F in repair 75 mm long aluminium anodised hasp and staple., complete all as specified and directed by Engr-in-charge.

S&F in repairs Plastic water closet seat cover, black, closed pattern with flat bottom, & cover & mild steel chromium plated or aluminized hinging devices, complete all as specified and directed by Engr-in-charge.

S&F in repair of SS/CP gratings of 125 mm dia with or without hole complete all as specified and directed by Engr-in-charge.

Demolition of cement concrete (unreinforced) in ground floors and pavings not exc 15 cm thickness (below or above ground level) and removal of unserviceable materials, debris and rubbish to a distance out side MD land complete all as specified and directed by Engr-in-charge.

M&L for 25 mm thick cement concrete 1:2:4 type B-0 (using 12.5mm graded crushed stone aggregate) as in sub base of flooring, incld. finishing the surface even & rough to receive tiling etc., complete all as specified and directed by Engr-in-charge.

M&L for non skid ceramic coloured tiles (premium quality) of size 7 to 8 mm thick (square/rectangular) area of each tiles exceeding 0.06 Sqm but not exceeding 0.11 Sqm, as in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the colour of tiles over and including 15mm thick screed bed or bedding layer in CM 1:6 complete all as specified and directed by Engr-in-charge.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing) and rubbish off the premises, complete all as specified and directed by Engr-in-charge.

M&L for glazed colour ceramic tiles (premium quality) of size 250X350X7mm / 300X450X7mm, as in vertical surface such as i.e. dado/skirting etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles, over & including M&L 10mm thick backing coat in CM (1:4) complete all as specified and directed by Engr-in-charge.

Taking up or down steel tubing and connection including cleaning for refixing or removal to store yard of bore 15mm complete all as specified and directed by Engr-in-charge.

Taking up or down steel tubing and connection including cleaning for refixing or removal to store yard of bore 20 mm complete all as specified and directed by Engr-in-charge.

Refixing old steel tubing and connections in new or old position as in walls, ceiling, floors etc bore of pipe 15mm complete all as specified and directed by Engr-in-charge.

Refixing old steel tubing and connections in new or old position as in walls ceiling floors etc bore of pipe 20 mm complete all as specified and directed by Engr-in-charge.

S&F of water 15 mm bore CPVC PIPE with all plain fittings of SDR-11 fixed to wall, ceilings or laid in floors (new or old position), including cutting chases, pinning in & making good to disturbed portion to match the existing surface etc., complete all as specified and directed by Engr-in-charge.

S&F of 20 mm bore water CPVC PIPE with all plain fittings of SDR-11 fixed to wall, ceilings or laid in floors, complete all as specified and directed by Engr-in-charge.

M&L in replacement of PVC overhead tank lid(as per existing make & model) of size suitable for 250 ltr to 500 ltr capacity tank, complete all as specified and directed by Engr-in-charge.

M&L in replacement flush pipe of polythene of low or high density or PVC 32mm for low level Cistern complete all as specified and directed by Engr-in-charge.

M&L in replacement of internal flushing cistern fittings (kit ) of make as per existing fitting, complete all as specified and directed by Engr-in-charge.

M&L in replacement of PVC good quality rubber washers for low level flushing cistern, complete all as specified and directed by Engr-in-charge.

M&L for replacement of floor trap/nahani trap by means of applying white cement with WPC and make good disturbed surface to prevent the seepage in toilet, bathroom and kitchen with a skilled person, including testing, complete all as specified and directed by Engr-in-charge.

S& F in repair Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed to 20mm dia bore pipe complete all as specified and directed by Engr-in-charge.

S&F in repair 15 mm bore CP brass two way bib cock, screwed down high pressure with crutch or butterfly handle scrwed both ends for iorn pipe complete all as specified and directed by Engr-in-charge.

S & F in repair brass CP Health faucet (ABS body) with 1.25 meter long flexible tube and ABS wall hook including making connection and fixed in position, complete in all respect, complete all as specified and directed by Engr-in-charge.

M&L in replacement of PVC bath cabinet box type with shutter complete as approved by the GE. complete all as specified and directed by Engr-in-charge.

M&L in replacement of brass jet spray with 1.2 meter steel/PVC tube complete all as specified and directed by Engr-in-charge.

S & F in repairs stainless steel plate rack of size 780mm X 900mm X 250mm of approved pattern made out of stainless steel sheet 0.56 mm thick with round 8mm dia rods complete all as specified and directed by Engr-in-charge.

Hacking out old broken glass (any thickness, size, quality or description) from metal frame incld punching or drilling out old glazing pins/ spring clips and provding and fixing new ones, complete all as specified and directed by Engr-in-charge.

S&F Sheet glass 3mm thick, ordinary quality and glazing with oil putty in squares not exceeding 0.5 Sq.m in each pane complete all as specified and directed by Engr-in-charge.

S&F for 4 mm thick figured, pin headed glass & glazing with oil putty in square n exc 0.50sqm ineach pane, complete all as specified and as directed by Engr-in-Charge.

M&L Securing glass of any description in existing metal frames glazed with putty/ beads including removing loose or ecayed putty/ beads, painting/oiling one coat on rebates, grooves, re-putting and painting/oiling puttied surface to match existing work, complete all as specified and directed by Engr-in-Charge. Note:- New length of frame reputtied shall be measured.

S&F in replacement decorative type curtain rod stainless steel finish of pipe 22 to 25mm dia with best quality knob metal with double fitting type including stainless steel brackets fixed to walls complete with two nos decorative stainless steel knobs at each end, complete all as specified and directed by Engr-in-charge.

Taking down bush/plant in roof sides, walls and any position and at any height in the existing bldgs completely removing all roots complete with the satisfication of Engr in charge and after removing the root, acid to be sprayed to the whole area and making good distrubed area with PCC/Plastering and paint the surface to match the existing surface etc complete all as specified and directed by Engr-in-charge.

Racking out joints/ pointing to squared rubble masonry un-coursed or brought up to courses masonry built in cement mortar or cement lime mortar, coursed or un-coursed in walls not less than 12mm deep, washing the joints, removing rubbish off the premises and keeping the surface to pointed or plastered wet for two days prior to re-pointing or plastering complete all as specified and directed by Engr-in-charge.

M&L keyed pointing in cement mortar (1:3) to squared rubble masonry regular coursed or un coursed complete all as specified and directed by Engr-in-charge.

M &L in replacement fabrication of pressed steel cupboard shutters using 0.80 mm thick MS plain sheet & with frame 1.00 to 1.25 mm thick bent to shape incl two coats of synthetic enamel paint on internal surfaces & two coats of hammer tone finish on external surfaces alongwith locking arrangement mortice lock handle, hinges etc. and including necessary fixing arrangements, make good to existing surfaces, complete all as specified and directed by Engr-in-charge.

M&L for repair to pressed steel cupboard shutter including replacement of hinge, mortice lock, handle etc and fixed to wall making them in serviceable condition and refixing on same opening making the wall surface good condition, complete all as specified and directed by Engr-in-charge.

Checking and attending complaint to cleaning and maintenance of sewage system including blocking/choke in WHB,bottle traps,kitchen sink/Nahani traps/floor traps, water closet, soil/went pipe running on external walls of bldgs including juction holes of any description and sewage line of any size upto first manhole in running/flowing order without blockage of any description in any situation manually and mechanically as required including all equipment viz bamboo,tools,sewage pump, sewage machine etc including replacement of defective items/materials and refixing covers to manhole/gully trap in position etc. after cleaning and removing the deposited sludge/solid/liquid material outside MD land complete all as specified and directed by Engr-in-charge.

Cleaning/removal of sewage block in the existing line in any depth from WC/Bathroom to first manholes or gully trap to manholes including cleaning of WC/bathroom/Kitchen/WHB and Nahani/ floor trap and testing of pipe by pouring water for SGSW/RCC/CI pipe at any floor complete all as specified and directed by Engr-in-charge.

Cleaning of manholes complete, of any size & any depth of manholes and at any location including taking out sludge and other material deposited in manhole and its disposal to a distance n exc. 50 M. complete all as specified and directed by Engr-in-charge.

Cleaning/Removal of sewage block in the existing line incl cleaning of complete line laid at any depth and at any location between two consecutive manholes/gully trap for the following :-(a)Two consecutive manhole or gully trap to manhole incl testing the pipe by pouring water from manhole for 150/200mm bore SGSW/RCC pipe. complete all as specified and directed by Engr-in-charge.

Removing Temporarily blockage of inlet of septic tanks with suitable wooden pugs/gunny bags and pumping out/bailing out effluent (liquid/semi liquid) from the septic tanks with diesel engine driven gen sets into closed containers or through PVC Hose pipes & delivering the same outside MOD land and buried in pits by making necessary excavation for filling of sludge and covering by earth on top properly and taking out the blocking arangements of inlet and making the system functional complete all as specified and directed by Engr-in-charge. Note:- All labour and T&P i.e. sewage water pump set, diesel, transportation of pump set from one place to other place, suction pipe, delivery pipe and manpower etc required for above work, shall be deemed included in unit rates quoted by the contractor and nothing extra shall be admissible on this account.

Cleaning/taking out sludge/mud/silt from septic tanks of any size and capacity (work in foul condition) mechanically including dewatering septic tank when ever required including removing of sludge/muds/silt in a closed container vehicle to a distance outside MD land and buried in pits by making necessary excavation for filling of sludge and covering by earth on top properly complete all as specified and directed by Engineer-in-charge. NOTE:-Sludge/muds/silt including water shall be measured before taking out from septic tank.

Pumping out water inflow caused by spring or tidal or river seepage, broken water mains or drains and the like with pumping set of 5 HP to 9 HP including POL/power consumption & operator maint etc. complete all as specified and directed by Engr-in-charge. Note : This item shall be operated only when specifically ordered by Engr-in-charge. (Duration of working hours shall be recorded)

Excavation in trenches n.exc 1.5 mtr wide and n. exc 1.5 mtr depth for foundation, for shafts, wells,cesspits, manholes, Pierholes etc n. exc 10 sqm on plan and n. exc 1.5 mtr in depth and getting out in hard/dense soil, complete all as specified and directed by Engr-in-charge.

All as per item No. 100 here-in-above but depth exc 1.5 mtr and n.exc 3.0 mtr deep complete all as specified and directed by Engr-in-charge.

Demolition of RCC/Salt glazed stoneware drain (including PCC bed and haunching) pipe set & jointed in cement mortar laid in trenches 150/200mm bore of pipe, complete all as specified and directed by Engr-in-charge.

Supply, laying, testing & commissioning of 150 mm bore Reinforced cement concrete pipes, one end socketed, class NP2, laid in trenches and jointed complete with collars all as specified and directed by Engr-in-charge.

Supply, laying, testing & commissioning of 200 mm bore Reinforced cement concrete pipes, one end socketed, class NP2, laid in trenches and jointed complete with collars all as specified and directed by Engr-in-charge.

M&L for PCC (1:3:6) type C-2 using 40mm graded stone aggregate as in concrete bed to drain pipes 150 mm bore including packing under and haunching against the the sides of pipe after they are laid and tested including neccessary formwork and shuttering complete all as specified and directed by Engr-in-charge.

M&L for PCC (1:3:6) type C-2 using 40mm graded stone aggregate as in concrete bed to drain pipes 200 mm bore including packing under and haunching against the the sides of pipe after they are laid and tested including neccessary formwork and shuttering complete all as specified and directed by Engr-in-charge.

Demolition of brick or stone / boulder masonry / PCC block walling built in cement mortar including all quoins arches pillars etc but excluding ashler facings, dressed stone work and pre-cast concrete articles and removal unserviceable materials, debris, rubbish to out side MD land complete all as specified and directed by Engr-in-charge.

M&L squared rubble walling, Jodhpur type, regular coursed, well bonded, bedded and solidly hearted, built in cement mortar (1:6) complete all as specified and directed by Engr-in-charge.

All as per item No. 108 here-in-above, but except stone complete all as specified and directed by Engr-in-charge.

Extra over stone walling for hammer dressing to face stone & dressing of face beds & joints as specified of squared rubble walling Jodhpur type regular coursed with maximum depression of face from straight edge held against the dressed surface n exc 20mm and dressing face beds and joints, complete all as specified and directed by Engr-in-charge.

M&L for 15 mm thick rendering in cement mortar 1:4 on stone masonry surface (Internally) of walls mixed with WPC, as per manufacturer’s direction and finished the surface even and smooth without using extra cement,complete all as specified and directed by Engr-in-charge.

M&L for plain cement concrete 1:2:4 type B-0 using 20mm graded crushed stone agg as in coping of manhole including necessary form work complete all as specified and directed by Engr-in-charge.

Returning , filling in soil (any type) incl spreading levelling, watering and well ramming in layers not exceeding 25 Cm thick,complete all as specified and directed by Engr-in-charge.

Removing surplus excavated material exc 250m but n.exc 500m where directed at a level not exceeding 1.5 Mtr above the starting point, complete all as specified and as directed.

Supply and Fix cast iron foot steps, n. exc 5 each in manholes, complete all as specified and directed by Engr-in-charge.

Cutting into existing manholes for connecting new drains, making good to pipe and rendering, cutting out existing benching for and forming branch channel [½ round or ¾ section] in cement concrete 1:2:4 type B1 smooth finished, and reforming benching as required for 150 mm bore pipe complete all as specified and directed by Engr-in-charge.

All as per item No. 116.00 here-in-above, but 200 mm bore pipe complete all as specified and directed by Engr-in-charge.

Dismantling of cast iron or PVC pipes of 100/110mm internal dia including fittings, jointed in cement mortar complete all as specified and directed by Engr-in-charge.

All as per item No. 118 here-in-above, but 75 mm bore pipe complete all as specified and directed by Engr-in-charge.

S & F in repairs 110mm bore PVC [SWR] pipes single socketed, in any length with rubber ring joints, fixed to walls with and including MS clamp, complete all as specified and directed by Engr-in-charge.

All as per item No. 120 here-in-above, but laid in trenches complete all as specified and directed by Engr-in-charge.

All as per item No. 120 here-in-above, but 75 mm bore pipe fixed to walls complete all as specified and directed by Engr-in-charge.

All as per item No. 120 here-in-before, but 75 mm bore pipe laid in trenches complete all as specified and directed by Engr-in-charge.

S&F PVC (SWR) branch pieces single socketed Y equal or unequal suitable for 110mm bore pipes, complete all as specified and directed by Engr-in-charge.

S&F PVC (SWR) bends any radius suitable for 110mm bore pipes, complete all as specified and directed by Engr-in-charge.

S&F PVC (SWR) bends 75mm dia with oval acess door, complete all as specified and directed by Engr-in-charge.

S&F PVC SWR vent cowl suitable for 110mm bore pipes, complete all as specified and directed by Engr-in-charge.

S&F PVC SWR vent cowl suitable for 75mm bore pipes, complete all as specified and directed by Engr-in-charge.

S& F in repairs 75mm bore PVC [SWR] Junction single [single "T"] equal or unequal with access door complete all as specified and directed by Engr-in-charge.

S& F in repairs 110 mm bore PVC [SWR] Junction single [single "T"] equal or unequal with access door complete all as specified and directed by Engr-in-charge.

M &L for cutting to Bituminious road for laying of RCC hume pipe & making good as per road specification, complete all as specified and directed by Engr-in-charge.

Cutting and grubbing of bushes grass and tree surrounding sewage line and levelling of ground around the sewage line, finish the surface and removing the waste material to distance exc. 50m and n exc. 250m and clearing the site, complete all as specified and directed by Engr-in-charge.

M&L for Cutting of berms and making good as per existing, complete all as specified and directed by Engr-in-charge.

Demolition RCC of any description and in any position not otherwise specifically complete all as specified and directed by Engr-in-charge.

M&L for precast RCC 1:2:4 Type B 1 using 20mm graded stone aggregate as in manhole cover/ drain cover slab with hole/without hole hoisted & laying in position, complete all as specified and directed by Engr-in-charge.

M&L for Mild steel TMT bars 10mm dia and over cut to length, bent to shape reqd, cutting bending and binding with mild steel wire not less than 0.90mm dia, complete all as specified and directed by Engr-in-charge.

S&F 75mm thick Jodhpur type stone slab not exc 2m in length dressed all face & along exposed edged size faced both sided as in drain cover, complete all as specified and directed by Engr-in-charge.

Supply only water proofing compound (ISI Marked), complete all as specified and directed by Engr-in-charge.

Taking down cement plaster on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water, etc. complete all as specified and directed by Engr-in-charge.

M&L for 15 mm thick Rendering in CM 1:4 using intergral water proofing liquid on stone masonry or fair faces of brick/stone masonry wk & finishing the surfaces even & fair w/o using extra cement complete all as specified and directed by Engr-in-charge.

Supply only in repair PVC valveless, syphonic action type, flushing cistern, low level, white, with inlet, ball valve, float and handle including brackets complete all as specified and directed by Engr-in-charge.

M&L for plain cement concrete 1:3:6 C2 using 40 mm graded crushed stone agg as in foundations filling /plinth protection and mass concrete, including necessary formwork, complete all as specified and directed by Engr-in-charge.

M&L for coloures Non - skid Ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.06 Sqm but not exceeding 0.11 Sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured over and including 15mm thick screed bed or bedding layer in CM 1:6 cement to match complete all as specified and directed by Engr-in-charge.

M&L for 75mm thick cement concrete type D-2 1:4:8 (using 40mm graded crushed stone aggregate) as in sub base complete all as specified and directed by Engr-in-charge.

M&L for Providing and laying 60mm thick factory made chamfered edge cement concrete paver block of M-35 grade with approved colour, design & pattern as in footparth, parks, lawns, drive ways or light traffic parking etc.,of required strength, thickness & size/shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 50mm thick compacted bed of fine sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand; complete all as specified and directed by Engr-in-charge.

Attending daily complaints of Jodhpur Mil area by deputing adequate number of teams of qualified Electrician and helper (round the colck) for repair, maintenance and making the continuity of supply after rectifying the defects of the electrical system by replacing the U/S items such as switches, sockets, distribution boards, MCB light/power , lamp holders-bracket/ pendent/ batten, bell/ buzzer , push button, ceiling rose, capacitors and other similar, light & power plug, including provisioning of small pieces of electrical cables PVC insulated copper multistranded conductor of sizes 1.5 Sqmm to 6 Sqmm single core and length not increasing 0.50 mtrs complete all as specified and directed by Engr-in-Charge. (Complaint slip shall be part of the bill).

Supply and replacment electronic adapoter for LED light up to 30 watt including taking down old unserviceable electronic adaptor of LED as per sample complete all as specified and directed by Engr-in-charge.

Supply and repalcement switch piano flush type 6 amp single pole one way 230 V incl dismantling of old unserviceable switch of any make complete all as specified and directed by Engr-in-charge.

Supply and repalcement switch piano flush type 6 amp single pole two way 230 V incl dismantling of old unserviceable switchof any make complete all as specified and directed by Engr-in-charge.

Supply and replacement switch piano flush type 16 amp single pole one way 230 V incl dismantling of old unserviceable switch of any make complete all as specified and directed by Engr-in-charge.

Supply and replacement bell push AC, 230 Volts, 5 Amps incl dismantling of old unserviceable bell push of any make. complete all as specified and directed by Engr-in-charge.

Supply and replacement socket out let flush type 6 amp 3/5 pin suitable for 6 Amp plug top 230 V incl dismantling of old unserviceable socket of any make complete all as specified and directed by Engr-in-charge.

Supply and replacement socket out let flush type 3/6 pin suitable for 16 Amp plug top multipurpose 230 V incl dismantling of old unserviceable socket of any make complete all as specified and directed by Engr-in-charge.

Supply and repalacement bell AC ding dong type 230 volts incl taking down old unserviceable bell complete all as specified and directed by Engr-in-charge.

Supply and replacement fan regulator electronic switch/ socket type incl dismantling of old unserviceable regulator complete complete all as specified and directed by Engr-in-charge.

Supply and replacement lamp holder insulated body with back plate batten/angle type for batten fittings incl taking down old unserviceable holder complete all as specified and directed by Engr-in-charge.

Supply and replacement fan capacitor 2.5 m.f.d for ceiling Fan, incl taking down old unserveable capacitor complete all as specified and directed by Engr-in-charge.

Supply and replacement fan capacitor 4 m.f.d for Exhaust Fan,incl taking down old unserveable complete all as specified and directed by Engr-in-charge.

Supply and replacement ceiling rose 3 terminals complete incl taking down complete all as specified and directed by Engr-in-charge.

Supply and replacement Modular switch any type and make 6 amp one way 230 V as per existing make incl dismantling of old unserviceable switch of any make complete all as specified and directed by Engr-in-charge.

Supply and replacement Modular switch any type and make 16 amp one way 230 V as per existing make inclding dismantling of old unserviceable switch of any make complete all as specified and directed by Engr-in-charge.

Supply and replacement Modular socket Any Type and make, 6 amp 3 Pin one way 230 V as per existing make incl complete all as specified and directed by Engr-in-charge.

Supply and replacement Modular switch any type and make 6 amp two way 230 V as per existing make including dismantling of old unserviceable switch of any make complete all as specified and directed by Engr-in-charge.

Supply and replacement Modular fan Regulator step type and make(1 or 2 module as per site requirement), 100 watt , 230 Volts as per existing make including dismantling of old unserviceable regulator complete all as specified and directed by Engr-in-charge.

Supply and fixing in replacement modular cover plate with frame 4 module type including concealed MS Box for fixing of modular switch socket, regulators, blank plates etc incl dismentaling old unserviceable cover plate complete all as specified and directed by Engr-in-charge.

Supply and fixing in replacement modular cover plate with frame 8 module type including concealed MS Box for fixing of modular switch socket, regulators, blank plates etc incl dismentaling old unserviceable cover plate complete all as specified and directed by Engr-in-charge.

Supply and fixing in replacement modular cover plate with frame 12/16 module type including concealed MS Box for fixing of modular switch socket, regulators, blank plates etc incl dismentaling old unserviceable cover plate complete all as specified and directed by Engr-in-charge.

Supply and replacement Modular socket Any Type and make, 16 amp 3/5 Pin one way 230 V as per existing make incl complete all as specified and directed by Engr-in-charge.

Supply and fixing in replacement electronic driver as per sample for LED fitting up to 50 watt incl taking down old unserviceable driver. complete all as specified and directed by Engr-in-charge.

M & L in replacement remote bell ding dong type all as specified and direcected incl taking down old UNSV bell complete all as specified and directed by Engr-in-charge.

Supply and replacement 2-Watt LED Wall Light (bed light) for reading incl taking down old UNSV light complete all as specified and directed by Engr-in-charge.

supply and replacement Spot light 6 Watts Black/ white Body LED Spot Light, Focus Light (Warm White) incl taking down old UNSV ligh complete all as specified and directed by Engr-in-charge.

Supply and replacement PVC insulated and unsheathed FRLS single core multistranded copper conductor for repair, in existing conduit of size 1.5 sqmm as in replacement of any defective/burnt circuit incl taking down old UNSV cable. complete all as specified and directed by Engr-in-charge.

Supply and repalacement PVC insulated and unsheathed FRLS single core multistranded copper conductor for repair, in existing conduit of size 2.5 sqmm as in replacement of any defective/burnt circuit.incl taking down old UNSV cable. complete all as specified and directed by Engr-in-charge.

Supply and repalacement PVC insulated and unsheathed FRLS single core multistranded copper conductor for repair, in existing conduit of size 4.0 sqmm as in replacement of any defective/burnt circuit.incl taking down old UNSV cable complete all as specified and directed by Engr-in-charge.

Supply & repalacement PVC insulated and unsheathed FRLS single core multistranded copper conductor for repair, in existing conduit of size 6.0 sqmm as in replacement of any defective/burnt circuit.incl taking down old UNSV cable complete all as specified and directed by Engr-in-charge.

Supply and fixing in replacement Modular Bell push any type and make 6 amp one way 230 V taking down old UNSV bell push complete all as specified and directed by Engr-in-charge.

Supply and fixing repair one bakelite sheet not less then 3mm thick after removing all connection including cutting/chassing to accommedate existing fitment and making connection including cadmium plated screws with cup washer of fwg size:- complete all as specified and directed by Engr-in-charge.

M & L in replacement GLS Coloured Lamp Red,Green,Milky,0-60 Watt complete all as specified and directed by Engr-in-charge.

Supply and replacement LED light fitting 1 X 20/22 watt (4 feet), decorative ultra slim type, with inegral driver, complete with all accessories and making necessary electric connection from ceiling rose to fitting terminal, complete and incl taking down old UNSV fitting complete all as specified and directed by Engr-in-charge.

Supply and replacement LED light fitting mirror type with high out put diffuser 2 feet, 10 watt 220 V AC decorative type with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size complete all as specified and directed by Engr-in-charge.

Supply & replacement LED Bulb threaded types in holders 0 to 15 Watts as per existing sample given by department complete all as specified and directed by Engr-in-charges.

Supply & in replacement LED Bulb brown in brightness(Warm tpye) 0 to 15 Watts as per existing sample given by department. complete all as specified and directed by Engr-in-charges.

Supply & in replacement LED light fitting 1x9W/1X10Wbulkhead luminaires including LED light driver holder connecting up with three core flexible copper conductor cable of suitable size incl taking down old UNSV Bulkhead fitting. complete all as specified and directed by Engr-in-charge.

Supply & in replacement PVC Surface Box including and with Two 6 Amps switch and one Two Amps sockets complete all as specified and directed by Engr-in-charge.

Supply & in replacement PVC Surface Box including and suitable for Two 16 Amps switch and Two 16 Amps sockets complete all as specified and directed by Engr-in-charge.

S&F in replacement sheet metal enclosures 240 volt with suitable rated bus bar for double door IP-42 DB's suitable for one MCB SPN as incoming and 2 MCB SP as out going, SPN 4 Way complete incl dismentaling of unservceable DB complete all as specified and directed by Engr-in-charge.

S&F in replacement sheet metal enclosures 240 volt with suitable rated bus bar for double door IP-43 DB's suitable for one MCB SPN as incoming and 6 MCB SP as out going SPN 8 way complete incl dismentaling of unservceable DB complete all as specified and directed by Engr-in-charge.

S&F in replacement sheet metal enclosures 240 volt with suitable rated bus bar for double door IP-43 DB's suitable for one MCB SPN as incoming and 10 MCB SP as out going SPN 12 way complete incl dismentaling of unservceable DB complete all as specified and directed by Engr-in-charge.

S&F replacement sheet metal enclosures 415 volt TPN 4 way with 200 Amp rated bus bar, double door IP-43 DB's suitable for one No 100 Amp 10 KA TPN MCCB as incoming complete incl dismentaling of unservceable DB complete all as specified and directed by Engr-in-charge.

Supply and Fix in replacement MCB Single pole 5-32 Amps ISI marked incl dismantaling old unserviceable MCB SP complete all as specified and directed by Engr-in-charge.

Supply and Fix in replacement MCB Single pole & neutral 40 Amps ISI marked incl dismantaling old unserviceable MCB SPN complete all as specified and directed by Engr-in-charge.

Supply and Fix in replacement MCB Single pole & neutral 63 to 100. Amps, as per site requirement ISI marked incl dismantaling old unserviceable MCB SPN complete all as specified and directed by Engr-in-charge.

Supply and fixing in replacement MCB TPN 63 to 100 Amps Make incl disntaling of old unserviceable TPN MCB complete all as specified and directed by Engr-in-charge.

Supply and fixing in replacement MCCB 100 amp TPN, 415 volts 16 KA rupturing capacity including proper thimbles, fixing on DB'S complete all as specified and directed incl disntaling of old unserviceable TPN MCCB. complete all as specified and directed by Engr-in-charge.

Supply and fixing in replacement MCCB 125 amp TPN, 415 volts 16 KA rupturing capacity including proper thimbles, fixing on DB'S complete all as specified and directed incl disntaling of old unserviceable TPN MCCB. complete all as specified and directed by Engr-in-charge.

Taking down bldg security light upto 45 watt and refixing the same after repiar, Electronic driver incl taking down are paid sepearately under sch A complete all as specified and directed by Engr-in-charge.

S & F Street light bracket made out of medium grade GI Pipe, bent to shape including GI Clamps nut,bolts washers,reducer of required size for suitable any type fittings etc complete including necessary painting and taking down old UNSV GI Bracket complete all as specified and directed by Engr-in-charge.

S&F in repalacement bldg security LED Light Luminaire of 35 Watts having IP 66 protection fiting made out of pressure die cast Aluminium housing with toughened glass with fixing of suitable size medium grade GI pipe band including drilling holling nuts & bolts 2 code of red oxide paint on GI pipe and fixing with wall security light on building wall complete all as specified and directed by Engr-in-charge.

Dismantling and opening the fans cutting damaged winding electrically and taking the fans to contractor wksp for rewinding of ceiling fan motor single phase 220/230 volts 50 c/s 1200/1400 mm sweep of any type with suitable size super enameled copper winding wire with allied winding material varnishing with air dry insulation carrying complete servicing of fan by cleaning greasing , replacement of bearing, oiling of moving parts, washer packing including replacement of split pin twin flexible copper wire of size 0.5 Sqmm length upto 1 Mtr length, reassembling and testing of load complete all as specified and directed by Engr-in-charge.

All as per Sl item No.200 herein before but for exhaust fans 300mm sweep. complete all as specified and directed by Engr-in-charge.

All as per Sl item No.200 here in before but for exhaust fan 450mm sweep complete all as specified and directed by Engr-in-charges.

S&F Ceiling fan blade suitable 1200/1400 mm sweep and to match with the existing fan and as approved complete all as specified and directed by Engr-in-charges.

Supply & replacement of heating element 1.5 KW triangle/round type for Geysers. complete all as specified and directed by Engr-in-charges.

Supply & replacement of heating element 2.0 KW triangle/round type for Geysers. complete all as specified and directed by Engr-in-charges.

Supply & Replacement of thermostat of geysers complete all as specified and directed by Engr-in-charges.

Supply & Replacement of Geyser assy 8/9 holes including, rubber rings, clamps, nuts & bolts etc for 25 Ltrs capacity geysers. complete all as specified and directed by Engr-in-charges.

Supply & Replacement of Geyser assy 8/9 holes including, rubber rings, clamps, nuts & bolts etc for 35 Ltrs capacity geysers. complete all as specified and directed by Engr-in-charges.

Supply & Fix of PVC cable 40/.0076 three core copper cable complete all as specified and directed by Engr-in-charges.

Taking down fan, sealing cable end,dismantling blades and removing fan and blades to store or repair and refixing in same position including connector from ceiling rose to fan connector complete all as specified and directed by Engr-in-charges.

Taking down exhaust fan and refixing and connecting up including provision of cable from ceiling rose to connector to fan complete all as specified and directed by Engr-in-charges.

M&L in repairs sub main wiring with PVC insulated and unsheathed 2x 4 Sq mm single core multistrandred copper conductor cable(FRLS) passing through in and including PVC conduit surface on walls with all required accesries of conduit ISI marked and conduit accessaries fixed on surface of wall, ceiling etc, making good the distrurbed surface, incl 4 Sq mm single core copper conductor cable PVC insulated and unsheathed as earth wire. complete all as specified and directed by Engr-in-charges. Note :- Two runs of cable 4 Sqmm (FRLS) and One run of 4 Sqmm copper conductor(FRLS) along with conduit shall be measured as one unit length including taking down old UNSV submain wiring

M&L in repairs sub main wiring with PVC insulated and unsheathed 2x 6 Sq mm single core multistrandred copper conductor cable(FRLS) passing through in and including PVC conduit , concealing in walls (by means of chasing including making good existing surface and matching existing surface ) ISI marked and conduit accessaries fixed on surface of wall, ceiling etc, making good the distrurbed surface, incl 6 Sq mm single core copper conductor cable PVC insulated and unsheathed as earth wire. complete all as specified and directed by Engr-in-charges. Note :- Two runs of cable 6 Sqmm (FRLS) and One run of 6 Sqmm copper conductor(FRLS) along with conduit shall be measured as one unit length including taking down old UNSV submain wiring

M&L in repairs sub main wiring with PVC insulated and unsheathed 2x 6 Sq mm single core multistrandred copper conductor cable(FRLS) passing through in and including PVC conduit surface in walls with all required accesries of conduit ISI marked and conduit accessaries fixed on surface of wall, ceiling etc, making good the distrurbed surface, incl 6 Sq mm single core copper conductor cable PVC insulated and unsheathed as earth wire. complete all as specified and directed by Engr-in-charges. Note :- Two runs of cable 6 Sqmm (FRLS) and One run of 6 Sqmm copper conductor(FRLS) along with conduit shall be measured as one unit length including taking down old UNSV submain wiring

M & L in replacement Earthing complete with galvanised steel earth plate electrode 60 x x60cm x 6 mm thick, buried directly in ground (earth pit not less than 2.25 metres deep below ground level) wih top edge of the plate not less than 1.5 metres below normal/hard/dense ground level, connected to galvanised earth lead wire 4.0mm dia by means of bolts, nuts, check nuts and washers of galvanised iron or steel all as shown in elevtrical plate No. 3 connected to earthing test point all as specified or indicated including testing on completion. complete all as specified and directed by Engr-in-charges. Note : Rates are deemed to be included for necessary earth work , earth pit with RCC cover of size 300X300 x25 mm etc

Supply and fixing in replacement PVC conduit including fitting such as tee,elbow,bend etc 20mm dia ISI (MMS)grade, incl taking down old unserviceable conduit complete all as specified and directed by Engr-in-charges.

Supply and fixing in replacement PVC cassing Capping tee,elbow,bend etc 20/25 mm dia ISI (MMS) incl taking down old unservecable cassing capping complete all as specified and directed by Engr-in-charges.