Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹3.1 CrAccepted-Finance DOOR NO 39 5 27 1 MURALINAGAR INDUSTRIAL ESTATE PO VISAKHAPATNAM 530 007 | VISAKHAPATNAM | VISAKHAPATNAM | ANDHRA PRADESH | 530007 | ₹3.1 Cr | L1 | Accepted-Finance Lowest Vendor |
| 2 | L2₹4.3 Cr+₹1.2 Cr (37.0%)Rejected-Finance | ₹4.3 Cr+₹1.2 Cr (37.0%) | L2 | Rejected-Finance Being Not L1 |
| 3 | L3₹4.5 Cr+₹1.3 Cr (42.4%)Rejected-Finance | ₹4.5 Cr+₹1.3 Cr (42.4%) | L3 | Rejected-Finance Being Not L1 |
| 4 | L4₹4.5 Cr+₹1.4 Cr (44.3%)Rejected-Finance | ₹4.5 Cr+₹1.4 Cr (44.3%) | L4 | Rejected-Finance Being Not L1 |
| 5 | L5₹4.6 Cr+₹1.4 Cr (45.6%)Rejected-Finance | ₹4.6 Cr+₹1.4 Cr (45.6%) | L5 | Rejected-Finance Being Not L1 |
| Sl No | Description | Qty | Unit | sree karthika fabs L1 | VTC ENGINEERING P LIMITED | SRI SURYA PROJECTS L6 | COMPRESSORS & CONTROLS L3 | VENKATA SAI SRINIVASA CONSTRUCTIONS PRIVATE LIMITED | ULTRADIMENSIONS PVT LTD L4 | BALAJI MATRIX HOLDINGS L5 | ANIL KUMAR BISWAL L7 | SPAAN Infratech L2 |
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| 1.00 | Cleaning of external surface of the underwater hull of the caisson gate by high pressure fresh water Jet washing machine (3000 Psi) immediately post docking complete all as specified and directed. | 370 | SqM | 195 ₹72,150 | - | 450 ₹1,66,500 | 400 ₹1,48,000 | - | 43.66 ₹16,154.2 Lowest | 410 ₹1,51,700 | 410 ₹1,51,700 | 150 ₹55,500 |
| 2.00 | Positioning and Staging of scaffolding of scaffolding for undertaking survey, renewal/repairs, surface preparation and painting of the caisson gate including internal staging- areas like decks, bulkheads and associated structures, tanks to facilitate reaching 100% every part of the external and internal surfaces of the entire gate all as specified and directed. The Principles dimensions of the gates are as follows:-
Note: Size of Surya Caisson gate 21m(L) x 15.3m(H) and Internal deck width 3m-7m. Scaffolding material will be provided by ND(V). | 4,800 | CuM | 130 ₹6,24,000 | - | 110 ₹5,28,000 Lowest | 149 ₹7,15,200 | - | 120.36 ₹5,77,728 | 129 ₹6,19,200 | 129 ₹6,19,200 | 150 ₹7,20,000 |
| 3.00 | Surface preparation by grit blasting confirming to SA 2.5 standard and Primer application on External and Internal Surfaces including A deck, internal deck plates, structural members, tidal tanks, scuttle, air and void spaces all as specified and directed (Primer to be applied within 04 hours from the time of blasting).
Note :- (a) Paint/primer will be provided by ND(V).
(b) Grit blasting is to be undertaken under covers to prevent spread of dust.
(c) Equipment, Grit Covers and all other associated items to be provided by firm at no additional cost. | 3,900 | SqM | 895 ₹34,90,500 | - | 1,150 ₹44,85,000 | 1,100 ₹42,90,000 | - | 767 ₹29,91,300 Lowest | 1,167 ₹45,51,300 | 1,167 ₹45,51,300 | 1,150 ₹44,85,000 |
| 4.00 | USG Survey post docking of all structural components including shell plates, tidal tanks, scuttles, decks, stiffeners, pipelines, valves and hatches post adequate surface preparation all as specified and directed.
(a) Equipment required for undertaking survey to be provided by firm at no additional cost. | 3,900 | SqM | 39 ₹1,52,100 | - | 40 ₹1,56,000 | 31 ₹1,20,900 Lowest | - | 113.28 ₹4,41,792 | 42 ₹1,63,800 | 42 ₹1,63,800 | 31 ₹1,20,900 Lowest |
| 5.00 | Metal build-up of pits/cracks as per survey report followed by grinding and DPT all as specified and directed. | 50,000 | Sqcm | 100 ₹50,00,000 | - | 135 ₹67,50,000 | 110 ₹55,00,000 | - | 42.48 ₹21,24,000 Lowest | 132 ₹66,00,000 | 132 ₹66,00,000 | 110 ₹55,00,000 |
| 6.00 | Renewal of all structural members (with stiffeners) as per survey report. Marking, cutting, fabrication and fixing of all structural members made out of M S Plate 8mm to 32 mm thick, followed by DPT confirming to relevant IS Standards all as directed.
Note: Plates for the repairs /renewal will be provided by ND(V). | 89,000 | Kg | 110 ₹97,90,000 Lowest | - | 185 ₹1,64,65,000 | 175 ₹1,55,75,000 | - | 226.56 ₹2,01,63,840 | 187 ₹1,66,43,000 | 230 ₹2,04,70,000 | 145 ₹1,29,05,000 |
| 7.00 | Renewal of all structural members (with stiffeners) as per survey report. Marking, cutting, fabrication and fixing of all structural members such as rolled section such as ‘T’ frame, angles and channels followed by DPT confirming to relevant IS Standards all as directed.
Note: - (a) Following Angles and channels to be supplied by firm:-
(i) MS L Angles: 75mm x 75mm x 12mm – 396 RM(appx)
(ii) MS L Angles: 100mm x 100mm x 8mm – 60 RM(appx)
(iii) MS L Angles: 130mm x 130mm x 10mm – 288 RM(appx)
(iv) MS C Channels: 150mm x 75mm x 10mm – 60 RM(appx)
(v) MS Flat bar: 75mm x 20 mm x 15mm – 60 RM(appx) | 13,000 | Kg | 115 ₹14,95,000 Lowest | - | 250 ₹32,50,000 | 265 ₹34,45,000 | - | 271.4 ₹35,28,200 | 289 ₹37,57,000 | 230 ₹29,90,000 | 290 ₹37,70,000 |
| 7.01(b) Hull repair/renewal is to be commenced immediately on identification of the areas required to be repaired/renewed as per survey report. (c) Stage inspection to be carried out for marking, cutting, fit-up and final welding by the firm under the supervision of ND (V) representatives. Refit monitoring team will be made for supervising the refit constituting of officers by ND(V). (d) Mobilization of welding machines and supply of weld consumables will be firm’s liability. (e) Mobilization of welding machines and supply of weld consumables will be firm’s liability. | ||||||||||||
| 8.00 | Painting of underwater hull of the caisson gate with two coat of anti-corrosive 150 DFT (Microns) each, one coat of Tie coat of 125 DFT(Microns) and three coat of Anti-Fouling 150 DFT(Microns) each as specified and directed.
Note :- Paint will be provided by ND(V). | 370 | SqM | 820 ₹3,03,400 | - | 1,260 ₹4,66,200 | 1,200 ₹4,44,000 | - | 339.84 ₹1,25,740.8 Lowest | 1,257 ₹4,65,090 | 1,257 ₹4,65,090 | 1,250 ₹4,62,500 |
| 8.01 | Painting above water area including top deck of caisson gate with two coat of anti-corrosive of DFT 150 Microns each and one top coat of DFT 60 Microns, all as specified and directed.
Note :- (i) Paint will be provided by ND(V).
(ii) Equipment required for undertaking painting to be provided by firm at no additional cost. | 400 | SqM | 350 ₹1,40,000 | - | 650 ₹2,60,000 | 605 ₹2,42,000 | - | 188.8 ₹75,520 Lowest | 641 ₹2,56,400 | 641 ₹2,56,400 | 690 ₹2,76,000 |
Tender Value
₹4.8 Cr
EMD Value
₹5.6 L
Closing Date
25 Mar 2025, 6:00 pmClosed
GE (I) DM, Visakhapatnam
GE (I) DM, Visakhapatnam
MAJOR REFIT FOR SURYA CAISSON GATE INCLUDING REPAIR/RENEWAL OF VALVE, PIPING SYSTEMS, OPERATING SYSTEMS, STAGING, SURFACE PREPARATION AND PAINTING AT NAVAL DOCKYARD VISAKHAPATNAM UNDER GE (I) DM VISAKHAPATNAM.
2025_MES_699249_1
8217/E8
Open Tender
Civil Works
Item Rate
270 days
Naval Dockyard Visakhapatnam
As per tender documents
8 documents required · 8 mandatory
₹2,000
GE (I) DM, Visakhapatnam
₹5.6 L
Yes
7 Oct 2025
25 Feb 2025
27 Mar 2025
25 Feb 2025
25 Mar 2025
18 Mar 2025
Amount
Cleaning of external surface of the underwater hull of the caisson gate by high pressure fresh water Jet washing machine (3000 Psi) immediately post docking complete all as specified and directed.
Positioning and Staging of scaffolding of scaffolding for undertaking survey, renewal/repairs, surface preparation and painting of the caisson gate including internal staging- areas like decks, bulkheads and associated structures, tanks to facilitate reaching 100% every part of the external and internal surfaces of the entire gate all as specified and directed. The Principles dimensions of the gates are as follows:- Note: Size of Surya Caisson gate 21m(L) x 15.3m(H) and Internal deck width 3m-7m. Scaffolding material will be provided by ND(V).
Surface preparation by grit blasting confirming to SA 2.5 standard and Primer application on External and Internal Surfaces including A deck, internal deck plates, structural members, tidal tanks, scuttle, air and void spaces all as specified and directed (Primer to be applied within 04 hours from the time of blasting). Note :- (a) Paint/primer will be provided by ND(V). (b) Grit blasting is to be undertaken under covers to prevent spread of dust. (c) Equipment, Grit Covers and all other associated items to be provided by firm at no additional cost.
USG Survey post docking of all structural components including shell plates, tidal tanks, scuttles, decks, stiffeners, pipelines, valves and hatches post adequate surface preparation all as specified and directed. (a) Equipment required for undertaking survey to be provided by firm at no additional cost.
Metal build-up of pits/cracks as per survey report followed by grinding and DPT all as specified and directed.
Renewal of all structural members (with stiffeners) as per survey report. Marking, cutting, fabrication and fixing of all structural members made out of M S Plate 8mm to 32 mm thick, followed by DPT confirming to relevant IS Standards all as directed. Note: Plates for the repairs /renewal will be provided by ND(V).
Renewal of all structural members (with stiffeners) as per survey report. Marking, cutting, fabrication and fixing of all structural members such as rolled section such as ‘T’ frame, angles and channels followed by DPT confirming to relevant IS Standards all as directed. Note: - (a) Following Angles and channels to be supplied by firm:- (i) MS L Angles: 75mm x 75mm x 12mm – 396 RM(appx) (ii) MS L Angles: 100mm x 100mm x 8mm – 60 RM(appx) (iii) MS L Angles: 130mm x 130mm x 10mm – 288 RM(appx) (iv) MS C Channels: 150mm x 75mm x 10mm – 60 RM(appx) (v) MS Flat bar: 75mm x 20 mm x 15mm – 60 RM(appx)
(b) Hull repair/renewal is to be commenced immediately on identification of the areas required to be repaired/renewed as per survey report. (c) Stage inspection to be carried out for marking, cutting, fit-up and final welding by the firm under the supervision of ND (V) representatives. Refit monitoring team will be made for supervising the refit constituting of officers by ND(V). (d) Mobilization of welding machines and supply of weld consumables will be firm’s liability. (e) Mobilization of welding machines and supply of weld consumables will be firm’s liability.
Painting of underwater hull of the caisson gate with two coat of anti-corrosive 150 DFT (Microns) each, one coat of Tie coat of 125 DFT(Microns) and three coat of Anti-Fouling 150 DFT(Microns) each as specified and directed. Note :- Paint will be provided by ND(V).
Painting above water area including top deck of caisson gate with two coat of anti-corrosive of DFT 150 Microns each and one top coat of DFT 60 Microns, all as specified and directed. Note :- (i) Paint will be provided by ND(V). (ii) Equipment required for undertaking painting to be provided by firm at no additional cost.
Painting of Internal area including decks, tidal tanks, scuttle tanks, air chambers, fittings, pipelines, bulkhead, stiffeners and other associated fittings and void spaces with two coat of anti-corrosive of DFT 150 Microns each, one coat of Tie coat of DFT 123 Microns and three coat of anti-fouling of DFT 150 Microns each, all as specified and directed. Note :- (i) Paint will be provided by ND(V). (ii) Equipment required for undertaking painting to be provided by firm at no additional cost.
Industrial safety marking and draught Marking on Outer Hull. Note :- (i) Paint will be provided by ND(V). (ii) Equipment required for undertaking painting to be provided by firm at no additional cost.
Air Pressure Testing (APT) of underwater compartments like Tidal chambers, Air chambers and Scuttle chamber inccluding blanking and rectification of minor defects. Tanks to be Air Pressure Tested and proved to @2kgf/cm2 all as specified and directed. (a) Tidal chambers = 04 Nos (b) Air chambers = 01 Nos (c) Scuttle tanks = 02 Nos
Visual inspection and INSITU workshop maintenance/ repairs for sluice valves of size NB 600 including joints, nut and bolts with washers, Stuffing box, connecting pipes, rubber gasket, seals and associated fittings for the system (as per IS specifications). Maintenance of the valves to include the under mentioned:- (a) Examine the condition of Stuffing Box/ Gland, Body-Dome, Dome-Stuffing Box and side flange gaskets and undertake repairs if any. (b) Examine the Noise/vibrations while opening or closing the valve undertake repairs if any. (c) Examine the condition of Body Seat Ring/Wedge Seat Ring check for scratches, dent marks, intactness. Undertake repairs if any. (d) Examine the condition of Spindle & Spindle Nut/ Yoke Sleeve threads. Undertake repairs if any.
(e) Close By-pass valve disconnecting the extension year rod connection. Try to flush away the external object by opening &closing the valve & creating flow to flush it away. Open flanged joint to reach the object and remove it manually. (f) Replace the Body/Wedge seat rings. (g) Tighten the gland gradually and uniformly. (h) Replace the gland packing rings
(i) Tighten the joint fasteners gradually and uniformly body dome/dome. (j) Replace the gaskets. (k) Re-tighten the flanged joint. (l) Remove parallel/angular gap between valve and pipe flanges and rectify (m) Replace Spindle nut. Spindle may also be replaced if the thread is excessively worn-out or damaged (n) Material for pipe joint of reuired dimension t be supplied by firm. Note: - Spares should be measured and paid separately.
All as per item No. 10.00 above, but for size NB 450 mm dia valve.
All as per item No. 10.00 above, but for size NB 300 mm dia valve.
All as per item No. 10.00 above, but for size NB 100mm Plug valve.
Removing, overhauling /repair. Re-fitting the Rod Gearing arrangement of all valves including universal joints, stuffing box, bearings. Undertake greasing and prove full closing and opening positions all as per IS 6157 specification and directed. Note:- Rod gearing for valves as per details below to be supplied by firm:-
Rod gearing for 600mm dia valve.
Rod gearing for 450mm dia valve.
Rod gearing for 300mm dia. Valve.
Repair/Renewal of 600mm dia. flooding pipe line in Air chamber including fabrication, rolling and transportation. Fixing of 600mm ID flanges to suit the existing pipe line, renewing of bolts and gaskets all as specified and directed
Repair/Renewal of 450mm dia MS flooding pipe line in Air chamber including fabrication, rolling and transportation. Fixing of 450mm ID flanges to suit the existing pipe line, renewing of bolts and gaskets all as specified and directed
Repair/Renewal of 300mm dia MS flooding pipe line in Air chamber including fabrication, rolling and transportation. Fixing of 300mm ID flanges to suit the existing pipe line, renewing of bolts and gaskets all as specified and directed. Note: The unit rate quoted above is inclusive of supply and fixing of MS Pipe 90 degree elbow joint of 300 mm ID of 08 Nos by firm.
Repair/Renewal of 100mm dia Stainless steel flooding pipe line in Air chamber including fabrication, rolling and transportation. Fixing of 300mm ID flanges to suit the existing pipe line, renewing of bolts and gaskets all as specified and directed. Note: The unit rate quoted above is inclusive of supply and fixing of stainless steel pipe 90 degree elbow joint of 100 mm ID of 08 Nos by firm.
Dismantling, repair/overhauling of existing head stock /bevel gears all as per specification and directed
Removing and re-fixing of wooden fenders of size 400x300 for survey of area underneath and re-fitment Including bolts ,nuts and washers all as specified and directed. Note: (a) Wood will be provided by ND(V). Cutting and shaping of wood to be done by firm at no additional cost. (b) Bolts ,nuts and washers will be supplied by firm only.
Supply and fixing in repairs Musical Note rubber water seal upto 0.2m in width and suitable for Caisson gate including application of rubber compound for ensuring water tight integrity. Note: Material will be provided by the firm only.
Repair/Renewal of walkway platform wooden flooring, by fixing of wooden planks as per existing required thickness and width including cramping or wedging up and also for punching nails of letting in screw head includig stopping and cleaning off to a smooth and evern surface complete. Note: Wood will be provided by ND(V). Cutting and shaping of wood to be done by firm at no additional cost.
Repair/Renewal of walkway platform by replacement of MS hand rails, platform frame work, landing platforms(Chequered Plate) and MS ladders including fabrication, erection and welding or bolting as necessary all as per specification and directed. Note: Material will be supplied by the firm only.
Repairs and renewal of Bollards of size 400mm dia MS pipe. Undertake load testing as per standard procedures all as specified and directed. Note: Steel are to be provided by firm in the quoted price.
Repair and renewal of eye hook made out of 30mm MS Plate with necessary stiffening on the gate structure all as specified and directed. Note:- Eye Hook are to be provided by firm in the quoted price.
Supply and fixing in repair of water tight hatches of sizes 680x 580 made out of 12 mm thick MS plate confirming to IS 2062 along with suitable Neoprene rubber gaskets all as specified and directed. Note:- Hatches are to be provided by firm in the quoted price.
Supply and fixing in repair of Sacrificial Anodes Mk-II including transportation from store, fixing and welding on both internal and external surfaces as specified and directed. Note:- Anodes are to be provided by firm in the quoted price.
SPAAN Infratech (BID ID -3270244)
COMPRESSORS & CONTROLS (BID ID -3270198)
ULTRADIMENSIONS PVT LTD (BID ID -3270364)
BALAJI MATRIX HOLDINGS (BID ID -3270514)
SRI SURYA PROJECTS (BID ID -3269867)
ANIL KUMAR BISWAL (BID ID -3270762)
Bidder Name
VENKATA SAI SRINIVASA CONSTRUCTIONS PRIVATE LIMITED
VTC ENGINEERING P LIMITED
stage.html
html • 0.07 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .