ROAD FURNITURE WORK AT DADAWADI ROAD, ORPAT ROAD AND OLD JABALPUR ROAD AREA OF TANKARA NAGARPALIKA AT TANKARA-MORBI (3rd attempt)

Estimated In figer In words

Road marking with hot applied thermoplastic paints with reflectorising glass beads on

bitumin surface providing and laying a hot applied thermoplastic compound 2.5 mm thick

including reflectorising glass beads @ 250gms per sqm area, thickness of 2.5mm is

excluding of surface applied glass beds as per IRC:35- 2015. The finished surface to be

level, uniform and free from streaks and holes. zebra patta /bump patta lane/center line/ Three hundred sixty seven point

edge line/cut patta. The white color marking should provide liminance coefficinet on seven two

cemend road shalll be min 130 mcd/m2/lux and Asphalt road shall be min 100 mcd/m2/lux

during the service life during the day time. The marking should meet the performance

criteria for night time reflectivity, wet reflectivity and skid resistance as mentioned in the

section 15 of IRC 35- 2015. Warranty for the Retro reflectivity should be two year

Item No.

Cat Eye / Road Stud / RPM: Supplying Raised Pavement Markers made of polycarbonate

and ABS moulded body and reflective panels with Micro prismatic lens (No Glass bead

lens) capable of providing total internal reflection of the light entering the lens face and shall

support a load of 13635 kgs. tested in accordance to ASTM D 4280 Type H and complying

to Specifications of Category A of MORTH Circular No RW/NH/33023/10-97 Ð DO III Dt

624.00 11.06. 1997. The height, width and length shall not exceed 20 mm, 130 mm and 130 mm 217.40 Two hundred seventeen point four Nos

and with minimum reflective area of 13 Sqcm on each side and the slope to the base shall

be 35 +/- 5 degree. The body of the marker should having finger grip for easy and accurate

placement and application with epoxy / bituminous Adhesive as recommended by the

manufacturer of the marker. The color of the marker should be as per the IRC 35-2015 and

as directed by Engineer-in-charge

Total Amount

Total Amount

GST Paid Will Extra On Government Rules

Condition - ( 1 ) This is an Unit percentage rate tender.

Above Rate Excluding of GST

GST Will Paid Extra As per Government Rule

I am/We are willing to carry out the work at( --------) % below -------%(shoud be written in figure

words ) ------------------------------below tender

I am/We are willing to carry out the work at( ------) % above------ --------%(shoud be written in figure

words ) ------------------------------above tender

item put as under

Item percentage rate Rs

Deduct --------------% below Rs.------------------------------

Total Rs. -------------------------In words ---------------------

Item percentage rate Rs

Add ---------% above Rs.- ----------

Total Rs.- ----------------------- In words----------------------

SIGN OF CONTRACTOR

Chief Officer

Tankara NagarPalika