WBMAD/ULB/KM/NIT-17(e) /Dev/2025-2026/Sl No-1

Taking out existing partition/ceiling of particle board, masonite board, ply board, soft board etc. of any thickness and refixing same in new position with necessary clamps making holes in walls, floor, roof and mending damages if any.[concrete plaster will be paid separately] PWD(WB), Item No.-43 Page No. - 155

Dismantling carefully wooden walling, flooring of ceiling and stacking dismantled materials as directed. PWD(WB), Item No.-17 Page No. - 13

Wood work in door and window frame fitted and fixed in position complete including a protective coat of painting at the contact surface of the frame exluding cost of concrete, Iron Butt Hinges and M.S clamps. (The quantum should be correted upto three decimals). (b) Ordinary teak. PWD(WB), Item No.-1 Page No. - 114

Panel shutters of door and window, as per design (each panel consisting of single plank without joint), including fitting and fixing the same in position but excluding the cost of hinge and other fittings. In ground floor. (i) 50mm thick shutters with 25mm thick panel of size 30 to 45 cm (b) Ordinary teak wood PWD(WB), Item No.-1 Page No. - 117

Supplying, fitting and fixing boiling water proof ply conforming to IS: 710-1977 bonded with phenol formaldehyde synthetic resin conforming to IS: 848-1974 of approved make and brand fitted and fixed as per design as per approval and direction of Engineer-in-Charge. [excluding the cost of supporting frame work and teak wood batten/Lipping] In Ground Floor (ii) 6mm PWD(WB), Item No.-2 Page No. - 173

Supplying, fitting and fixing boiling water proof block board conforming to IS:1659-1990 conforming to IS:848-1974 of approved make and brand, fitted and fixed as per design as per direction of Engineer-in-charge. [Excluding the cost of supporting frame work and teak wood batten/Lipping]. In Ground Floor PWD(WB), Item No.-4 Page No. - 173

Supplying fitting, fixing decorative lamination conforming to IS: 2046 : 1995 as per approved make, brand, finish and thickness with fitting, fixing the same on Particle/MDF / Ply Boards with recommended / approved adhesive with proper clipping the sides for better attachment as per direction of Engineer-incharge.The rate includes the cost of labour, adhesive and all incidental charges thereof. In ground floor Glossy/Matt/Suede excluding surface texture or metallic lustre (i) Thickness of laminate 1.5mm PWD(WB), Item No.-14 Page No. - 179

Partition of teak veneer [1 mm] as per design fitted and fixed complete (excluding the supporting frame work & necessary teak wood battens): In ground floor (i) 4mm thick commercial quality PWD(WB), Item No.-18 Page No. - 180

Plain and finished timber planks in partition, shelves etc. fitted and fixed complete as per design (butt joints) in ground floor PWD(WB), Item No.-17 Page No. - 179

Anodised aliminium D-type handle of approved quality manufactured from extruded section conforming to I.S. specification (I.S. 230/72) fitted and fixed complete: PWD(WB), Item No.-30 Page No. - 145

Iron butt hinges of approved quality fitted and fixed with steel screws, with ISI mark. (v) 75mm. X 60mm. X 3.15mm PWD(WB), Item No.-5 Page No. - 140

(viii) 100mm. X 75mm. X 3.50mm

Supplying bubble free float glass of approved make and brand conforming to IS: 2835-1987.) 4mm thick clear glass PWD(WB), Item No.-9 Page No. - 243

Supplying Glazing Silicon of approved make and brand for fixing of Glass on Sub-frame as per direction of Engineer-in-charge for Structural Glazing/Curtain wall PWD(WB), Item No.-20 Page No. - 248

i) Hydraulic door closer of approved quality as per I.S.I. standard fitted and fixed complete (a) Heavy type (I.S.I. size 3) PWD(WB), Item No.-16 Page No. - 142

Labour for fitting and fixing different type of automatic door closer with necessary screws PWD(WB), Item No.-21 Page No. - 151

(b) Supplying 'Godrej' mortice lock chromium plated with keys 6 levers including fitting & fixing complete. PWD(WB), Item No.-16 Page No. - 142

Supplying wooden moulding slanting beat of size 37mm X 18mm (finished) of approved design to finish the joint between wooden frame of door/window with masonary in true line and level fitted & fixed with adhesive and head less pins complete as per direction of Engineer -in-charge. PWD(WB), Item No.-38 Page No. - 147

Supplying, fitting and fixing clear visioned, Insulated Double Glazed two track sliding Aluminium window (U-value < 3.2W/m 2 K) made up with 6 mm thick toughened glass (wt > 15kg/m 2 ) with 12 mm air gap in between, containing perforated Al/ structural foam spacer filled with moisture absorbant dessicant at all sides duly sealed with primary sealant (polyisobutylene) and affixed inside multi cellular/ multi chember profiles of required section made of Alluminium alloy extrusions conforming to IS:733- with secondary (polysulphide/silicon) sealant all junctions complete in all respect as per direction and satisfaction of Engineer-in-Charge including all incidental charges. (Payment shall be made on finished size of Aluminium window including frame.) PWD(WB), Item No.-18Page No. - 291

Add 18% GST

Add 1% Cess