S/R to Satibati to Balichaturi for the Year 2025-26

P.C.C.M-15 with Cement concrete 1:2.5:5 in Foundation with using h.g.stone agreegates of approved quality including hoisting and laying placing in position concrete watering and curing including cost of rigid and smooth stool centering and shuttering and cost, conveyance, royality and taxes of all materials labour required for the work etc. complete The materials used in the work and finished item of work shall confirm to relevant I.S specification and as per specification and direction of the Engineer-In-charge

Construction of un-reinforced dowel jointed at expansion joint and construction joint only, plain cement concrete pavement, thickness as per design, over a prepared sub base, with 43 grade cement or any other type as per Clause 1501.2.2 M30 Grade, coarse and fine aggregates conforming to IS:383, maximum size of coarse aggregate 20 mm down graded, mixed in a concrete mixer and appropriate weigh batcher using approved mix design, laid in approved fixed side formwork steel channel, laying and fixing of 125 micron thick polythene film, wedges, steel plates including levelling the formwork as per drawing, spreading the concrete with shovels, rakes, compacted using needle, screed and plate vibrators and finished in continuous operation including provision of contraction and expansion, construction joints, applying debonding strips, primer, sealant, dowel bars, near approaches to bridge culvert and construction joints, admixtures as approved, curing of concrete slabs for 14-days, curing compound where specified and water finishing to lines and grade as per drawing and as per direction of Engineer-in-Charge.

Earthwork in hard soil or gravelly soil within 50m initial lead and 1.5m initial lift including rough dressing and breaking clods by mechanical means to maximum 5cm to 7cm and laying in layers not exceeding 0.3m in depth and as per the direction of Engineer-in-charge. Filling

Earthwork in excavation in foundation and trenches hard soil or gravelly soil within 50m initial lead and 1.5m initial lift including rough dressing and breaking clods to maximum 5cm to 7cm and laying in layers not exceeding 0.3m in depth and as per the direction of Engineer-in-charge.

Filling with sand well watered and compacted with appropriate rammer or mechanical compactor and top surface dressed and levelled to proper gradient as per direction of the Engineer-in-charge including watering and ramming with cost conveyance, royalities, taxes of all materials and labour with required for the work etc. complete as per specification and direction of the Engineer-In-charge.

P.C.C.M-15 with Cement concrete 1:2.5:5 in Sub-structure with using h.g.stone agreegates of approved quality including hoisting and laying placing in position concrete watering and curing including cost of rigid and smooth stool centering and shuttering and cost, conveyance, royality and taxes of all materials labour required for the work etc. complete The materials used in the work and finished item of work shall confirm to relevant I.S specification and as per specification and direction of the Engineer-In-charge

Providing weepholes in brick masonry or stone masonry, plain or reinforced concrete abutment, wing wall, return wall with 100 mm dia AC pipe extending through the full width of the structures with slope of 1V:20H towards drawing face complete as per drawing and technical specification and direction of Engineer-In - charge.

Please Enable Macros to View BoQ information