Maintenance and Electrical consumption charges of street light on PWD Road under CND Division. (SH-Beautification of Roundabout at Bhalaswa, Jagat Puri and Nagia Park).

Supply, installation, testing commissioning of 4 Mtr height decorative pole, duly premiered & Painted. The Pole shall be painted in dual shade with polyurethane paint of approved colour and glossy finish. The Pole bottom made out of single piece gravity aluminum casted base H-760mm along with bottom & middle ring are in cast aluminum. Pole shall be fabricated with crown on Top in golden colour casted in aluminum. The pole shall be provided with inbuilt loop box, earth stud & 4 way 25 Amp. Heavy Duty Connector, I No. 6 amp. SPMCB & shall have matching flush door, complete, the pole shall be divided in two section: a) Bottom & Middle section of the pole combined height shall be 2000mm wherein bottom having 760 mm gravity aluminum casted base & middle section having 165mm dia GI Pipe.b) Top Section 150mm dia of Unbreakable polycarbonate diffuser 3mm thick 2000mm high equipped with white/yellowish colour 75 Watt LED Confirming to IP 66 powered by suitable driver with 10KV surge.c) Base plate of Pole having 570mm dia 12mm thick duly welded and complete with all connections and accessories like connector, wire, MCB suitable size i/c making suitable size foundation with foundation bolt etc and Dismantling of old damaged/ broken pole from foundation complete with disconnection and credit for the same etc. complete as required. (Note:- The newly installed poles should be identical in specifications, dimensions, material composition, design, and finish to the previously installed poles, ensuring uniformity in appearance, structural integrity, and functionality) (Annexure- D)

SITC of decorative 40 Watt LED IP-65 weather proof, Post-Top / Pole light fitting made out of spun aluminum housing with opal /clear acrylic protector duly silicon filled, U.V. Resistant P.U./Powder coated paint , with highly effacing electronic external driver , high voltage protection, power LED White / Warm White mounted on MCPCB with better heat dissipation arrangement .duly wired up to connector complete etc as reqd i/c dismantling of existing defective part and credit for the same as reqd

SITC of Customized Architectural Laser Cutting bollard made of mild steel sheet with 3mm thick and overall height of the bollard not less than 850mm. (as per drawing attached) duly finished with coat of protection coating VIZ Each primer, epoxy primer with polyurethane paint and frosted PC diffuser thickness 2.5mm. The bollard made of square cross section size 170x170x3mm thick made of MS Sheet, Base plate size 250x250x6mm including a decorative laser pattern four side of the bollard with 20Watt Led Light source, IP-65, Efficacy- 80 lm/watt, THD <10%, PF>0.9, Surge 4K, CCT- 3000K, CRI>70, life of LED -50,000 burning hours at top of the bollard complete with cc foundation and bolt etc as reqd. (Annexure- E)

Repairing of existing Hi- lite make, Tri Colour decorative Pole with LED 75W LED Driver, LED PCB & 2Mtr. Decorative Polycarbonate Diffuser 150mm i/c connection & nut bolts etc. complete i/c dismantling of existing defective part and credit for the same as reqd

2Mtr. Decorative Polycarbonate Diffuser 150mm.

75W LED Driver (Phillips).

LED PCB module for Tri‐Colour.60Watt

SITC of 4Mtr decorative combo pole made out of cast iron base of 625mm long and top 76mm G.I. Pipe. The pole having integral connection box duly cover the same. Connection box built in bakelite plate, 4way heavy duty connector, din channel suitable for SPMCB. The Pole shall be primer & painted with polyurethane paint as approved colour finish /c making suitable size foundation with foundation bolt etc.

SITC of Double arm bracket made out of different section of mild steel tubes, joints Cast Alum embellishment suitable for Post-Top fitting. The bracket should be primer & painted with polyurethane paint above matching pole etc as reqd.

SITC of 40W LED Post Top made out of die cast aluminum housing, Spun Aluminium PC/PMMA diffuser is provided for glare free lighting with 2/3 casted aluminum arms fixture shall be powder coated / PU painted in approved colour fitting of having following features: Total system lumen output should be minimum 4000, Luminous efficacy 100 lm/watt, CCT = 3000-6500K, CRI 80,Surge protection device > 4KV, IP 65 housing, electronic driver, as per specification given in terms and conditions etc. complete as required. As per drawing attached in size of fitting may be allowed ±5%.complete i/c dismantling of existing defective part and credit for the same as reqd

Earthing with G.I. earth pipe 4.5 metre long, 40 mm dia including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe etc. with charcoal/ coke and salt as required.

Providing and fixing 25 mm X 5 mm G.I. strip in 40 mm dia G.I. pipe from earth electrode including connection with G.I. nut, bolt, spring, washer excavation and re-filling etc. as required.

Supplying and laying of following size DWC HDPE pipe ISI marked along with all accessories like socket, bend, couplers etc. conforming to IS 14930, Part II complete with fitting and cutting, jointing etc. direct in ground (75 cm below ground level) including excavation and refilling the trench but excluding sand cushioning and protective covering etc., complete as required. (a) 63 mm dia (OD-63 mm & ID-51 mm nominal)

Fabrication, supply, installation, testing and commissioning of MV compartmentalized type outdoor type single door cubical feeder pillar panel, having front area not less than 0.6sqmtr. having 300 mm depth, made out of 2 mm thick CRCA sheet with 100 Amps rated 4 strip aluminium busbar, free standing totally enclosed dust and vermin proof, suitable for operation on 3 phase 415 V, 4 wire AC supply system, having suitable cable entry arrangement with detachable gland plates, duly powder coated, interconnection with suitable size aluminium strips / bars connections, earthing labelling, quarter turn knobs, etc. with cable chamber, busbar chamber , complete with fixing of panel on MS stand of size 50 mm x 50 mm x 6 mm thick and 1000 mm height angle iron framework grouted 500 mm deep in CC foundation i/c painting of MS frame work with synthetic enamel paint etc. as reqd. (a) Incomer = 63A TPN MCCB, 415V, (Icu=Ics), with Thermal Magnetic release b) Phase indicating lamps(LED type) with toggle switches, control fuses etc. - 1 set (c) Outgoings: a)43A contactor three pole with 415 volt AC supply - 1 Nos. b)32A TP MCCB, 415 V, 10kA (Ics = Icu), with adjustable thermomagnetic release - 3 Nos. d) Astronomical time switch capable of automatic switching On & OFF of park lights at sun set & sun rise or twilight (Auto ON, Auto OFF) in feeder pillars - 1 No. e) GI earth strip of suitable size to full width of cubicle panel with two earth studs at the ends as required - 1set f) Anodised aluminium MV danger notice plates and phenolic labeling as required - 1set

Supplying and laying one number PVC insulated and PVC sheathed / XLPE aluminium power cable of 1.1 kV grade of following size in existing DWC Pipe/ Duct / on wall surface etc and dismantling of credit back old defective cable etc as required

3 x 10 sqmm

4 X 16 sq mm

Supplying and Drawing i/c connections & interconnections of following sizes of PVC Insulated and PVC Round Sheathed Multi Core Flexible Aluminium Conductor Heavy Duty Industrial Cables for Voltage Grade 1100 Volts as per IS: 694:2010 for interconnection from window to fitting of street light pole and high mast pole height of upto 30 mtrs.etc complete as reqd.

3 x 4 sq.mm