M/o Road (Annual Maintenance of Road, Footpath and Central Verge in Sector-39 to 51, 99, 100, Village Sadarpur, Barola, Challera, Aghapur, Hosiyarpur and MP-3 Road, 75mtr wide road, DSC road etc) Noida.

Removing Dry of Oil Bound Distemper, Water Proofing Cement Paint and the like by Scrapping, Sand Papering and Prepairing the Surface Smooth Including Necessary Repairs to Scratches etc. Complete.

Painting with synthetic enamel paint of approved brand and manufacture of required to colour to give an even shade. Two or more coat on new work. (DSR 2018 I.No. 13.61.1/P-227)

Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 100 in foundation and plinth in: Cement mortar 1:4 (1 cement : 4 coarse sand AOR 6.1.1

12 mm cement plaster of mix : 1:4 (1 cement : 4 coarse sand) (DSR-18/I-13.4.1/P-222)

Neat cement punning.

Finishing wall with water proof cement paint of approved make and quality on new wood with two coat to give an even shade including supply of all materials labour Tools & plant etc required for proper completion of the work SOR I.NO. 15.20 660

Painting with synthetic enamel paint of approved brand and manufacture of required to colour to give an even shade. One or more coat on old work. DSR-18/I.No. 14.54.1/ P-242

Taking out existing CC interlocking Paver Blocks from footpath/central verge, including removal of rubbish etc. disposal of unserviceable material to the dumping ground, for which payment shall be made separately and stacking of serviceable material within 50 metre lead as per direction of Engineer-in-Charge (DSR 2016/ I.No. 16.83/P-280)

Laying old cement concrete interlocking paver blocks of any design/shape laid in required line, level, curvature, colour and pattern over and including 50mmthick compacted bed of coarse sand, filling the joints with fine sand etc. all complete as per the direction of Engineer-in-charge. (Old CC paver blocks shall be supplied by the department free of cost)

P/L factory made coloured chamfered edge cement concrete paver blocks of required strength, thickness & size/shape, made by table vibratory method using PU mould, laid in required colour & pattern over 50mm thick compacted bed of fine sand, caompacting and proper embedding/laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate/vibrator filling the joints with jamuna sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand in footpath, parks, lawns, drive ways or light traffic parking etc. complete as per manufacture's specifications & Direction of Engineer in charge 60mm thick C.C. paver block of M-35 grade with approved colour, design & pattern. DSR-2018/I.No-16.91)