Loading
Loading…
Loading…
Tender Value
₹2.9 Cr
EMD Value
₹5.8 L
Closing Date
4 May 2026, 3:00 pmClosed
No
Single Packet System
Normal Tender
No
Not Applicable
Lowest to Highest
60 days
Expenditure
Capital (Works)
SNT TENDER
14 conditions · 3 needing a document upload
The tenderer must have minimum average annual contractual turnover of V/N or 'V' whichever is less; where V= Advertised value of the tender in crores of Rupees N= Number of years prescribed for completion of work for which bids have been invited. The average annual contractual turnover shall be calculated as an average of "total contractual payments" in the previous three financial years, as per the audited balance sheet. However, in case balance sheet of the previous year is yet to be prepared/ audited, the audited balance sheet of the fourth previous year shall be considered for calculating average annual contractual turnover. The tenderers shall submit requisite information as per Annexure-VIB, along with copies of Audited Balance Sheets duly certified by the Chartered Accountant/ Certificate from Chartered Accountant duly supported by Audited Balance Sheet.
The tenderer must have successfully completed or substantially completed any one of the following categories of work(s) during last 07 (seven) years, ending last day of month previous to the one in which tender is invited: ( i ) Three similar works each costing not less than the amount equal to 30% of advertised value of the tender, or (ii) Two similar works each costing not less than the amount equal to 40% of advertised value of the tender, or (iii) One similar work costing not less than the amount equal to 60% of advertised value of the tender.
Similar Nature of work: "Any RI or EI or CLS or ABS or TPWS or TMS or IBS or Track circuiting work of Any AFTC work or Any Axle Counter work involving Outdoor work."
6 conditions · 1 needing a document upload
Please enter the percentage of local content in the material being offered. Please enter 0 for fully imported items, and 100 for fully indigenous items. The definition and calculation of local content shall be in accordance with the Make in India policy as incorporated in the tender conditions.
Checklist for Tenderer: The Tenderer shall submit signed copy of Check-list placed in documents attached with tender. The Tenderer shall also submit relevant documents of compliance of the checklist if any.
Similar Nature of Work :- "Any RI or EI or CLS or ABS or TPWS or TMS or IBS or Track circuiting work of Any AFTC work or Any Axle Counter work involving Outdoor work."
(i)Bhavnagar Division: Improvement in safety and reliability by providing Assistance to the Engineering Department while working on various type of Engineering Track Machine Work. (ii) Bhavnagar Division: Supply, installation, testing & commissioning of signalling materials in connection of conversion of SWR to LWR on 2 to 4 Degree curves. (iii) Name of work: Supply, installation, testing & commissioning of Signaling work in connection of Rajkot - Somnath - TRR (P) - 26 Tkm.
DRMSnT-BVP-Sig03of26-27
DRMSnT-BVP-Sig03of26-27
Open
Works - General
24 Months
Bhavnagar, Gujarat
₹0
₹5.8 L
4 May 2026
10 Apr 2026
20 Apr 2026
93 items across 5 schedules
| # | Description | Unit | Qty | Rate | Amount |
|---|---|---|---|---|---|
| — | 2920.00 | — | — | ||
| — | — | — | 37,44,286.8 | ||
| — | 7300.00 | — | — | ||
| Provision of semi-skilled man power to for Signal maintenance & attending failures of signal gears throughout the period as per instruction of SSE Sig in charge during day/night up-to 8 hrs per day for 365 days as per Railway's site Engineer's Instructions. (10 Man powers X 730 Days = 7300 Nos.) (Unit read as Man - Days) | — | — | — | 71,01,002 | |
| — | 14600.00 | — | — | ||
| Provision of unskilled manpower as assistant to SSE/JE/ESMs during maintenance, inspection & attending failures of signal gears throughout the period as per instruction of SSE Sig incharge during day/night upto 8 hrs per day for 365 days as helping hand for miscellaneous works as per Railway's site Engineer's Instructions. (20 Man powers X 730 Days =14600 Nos.) (Unit read as Man - Days) | — | — | — | 1,21,47,930 | |
| — | 365.00 | — | — | ||
| Maintenance of Track Mounted Equipments like S&T fitting on turnouts including different activities during BCM/TTM/UNIMATE machine works as follows: Specially opening and re-fixing of DC Track circuit jumpers / Axle Counter transducers during different Engineering Works. Opening of DC Track circuit / Axle Counter transducers digging work from rail to TLJB / TMU/Location is required to be done as per site requirement also after re-fixing of DC-Track circuit / Axle Counter transducers needs to be buried in proper depth. Itincludes drilling hole in rail as per site requirement. The team to be provided for this work should comprise of: Fitter -1 Nos., Blacksmith -1Nos., Mason /Carpenter - 1 No. and Helpers - 5 Nos. also it includes any work of Electrical operated lifting barriers (EOLB) or sliding boom and earthing arrangement of Signalling gears. Any other work asper instruction of Railway Engineer. All T&P & jigs required to execute the work will be supplied by the contractor. (01 Nos Team X 365 Days = 365) (Note: The unit for this item may be read as per day per team). | — | — | — | 27,19,852.25 |
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
HTML
nit.pdf
NIT
GCC-2022-uptoACS10_merged_compressed.pdf
ATTACHMENT
GCCACS11.pdf
ATTACHMENT
CHECKLISTFORTENDERERmorethan50Lacs.pdf
ATTACHMENT
SignedJPOBVPDivisionforundertakingdiggingworkinthevicinityofSTandElectricalcablesmerged..pdf
ATTACHMENT
ScheduleandTenderConditions.pdf
ATTACHMENT
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .