Repairing & Renovation

Item Rate In

(with brief specification and reference to book Quantity Unit Amount

No. Figure

of specifications)

[1] Demolition of Brick work and stone masonry including 3.00 Cum 536.09

stacking of serviceable materilas and disposal of

unserviceable materials with all lead and lift (ii) In Cement

[2] Dismentling doors, windows, ventilators etc. (wood or steel) 10.00 Each 244.98

shutters including chowkhats architraves, holdfasts and other

attachment etc. complete and stacking them within all lead

and lift (ii) Exceeding 3 Sq.M. in area.

[3] Providing 15mm thick cement plaster in single coat on Rough 36.00 Sqm 194.07

(Similar)side of single or half brick walls for interior

plastering upto floor two level and finished even and smooth

in (ii) Cement mortar 1:4 (1-cement :4-sand)

[4] Providing and laying Vitrified tiles 8 to 10 mm thick, in skrting 45.00 Sqm 1538.85

risers of steps and dedo on 10mm thick cement plaster 1:3 (1-

cement : 3-coarse sand) and jointed with white cement slurry

[5] Providing and laying 60 x 60cm Antiskid Vitrified tiles 8 to 10 8.00 Sqm 1484.61

mm thick in flooring treads of steps and landing laid on a bed

of 12mm thick cement mortar 1:3 (1-cement : 3-coarse sand)

finishing with flush pointing in white cement.

[6] Providing and fixing standared extruded of alluminium 1.00 Sqm 1525.00

section of size 63.50 x 38.10 x 1.95 mm @ Wt 1.094Kg / Rmt

with colour Powder Coated alluminium frame with 5 mm

thick transparent bronze colour tinted float glass as details etc

complete for Fix window.

[7] Providing laying and jointing in true line and level 15mm dia. 10.00 Rmt 72.65

U.P.V.C. Pipe (SCH- 40) for cold water including fittings as

approved by Engineer In Charge. Pipe shall be fixed on the

wall with the help of clamp at every two metre C/C or shall be

concelled as directed including necessary fittings etc.

including testing of pipe and joints and fixing the same with

adhesive solvent, including cost of all materials.

[8] Providing laying and jointing in true line and level 25mm dia. 10.00 Rmt 91.84

U.P.V.C. Pipe (SCH- 40) for cold water including fittings as

approved by Engineer In Charge. Pipe shall be fixed on the

wall with the help of clamp at every two metre C/C or shall be

concelled as directed including necessary fittings etc.

including testing of pipe and joints and fixing the same with

adhesive solvent, including cost of all materials. [B] 25mm dia.

[9] Providing laying and jointing in true line and level 40mm dia. 10.00 Rmt 148.12

U.P.V.C. Pipe (SCH- 40) for cold water including fittings as

approved by Engineer In Charge. Pipe shall be fixed on the

wall with the help of clamp at every two metre C/C or shall be

concelled as directed including necessary fittings etc.

including testing of pipe and joints and fixing the same with

adhesive solvent, including cost of all materials.[D] 40 mm.

[10] Providing and fixing Stainless Handle vlave of aprroved brand 1.00 Nos 239.37

(A) 15mm dia.,

Description of Item

Item Rate In

(with brief specification and reference to book Quantity Unit Amount

No. Figure

of specifications)

[11] Providing and fixing Stainless Handle vlave of aprroved brand 1.00 Nos 373.70

(B) 25mm dia.,

[12] Providing and fixing Stainless Handle vlave of aprroved brand 1.00 Nos 550.45

(C) 40mm dia.,

[13] Providing, laying and jointing in true line and level 75 10.00 Rmt 714.46

diametre U.P.V.C (Type B) conforming to IS 13592-1992 with

one end plain and other end socketed with rubber ring, &

fittings conforming to ISI 14735-1999 of approved make for

drainage system pipe line, pipe shall be jointed with each

other with rubber lubricant, pipe shall be fixed on wall using

of PVC clamp of the size 110 mm diametre x 149 mm length x

145 mm heigh at every 2000 mm center to center or shall be

concealed in walls as directed including necessary fittings

such as bends, shoes etc. including testing of pipes and joints

and jointed with adhesive solvent cement including cost of all

materials.

[14] Providing, laying and jointing in true line and level 110 20.00 Rmt 835.15

diametre U.P.V.C (Type B) conforming to IS 13592-1992 with

one end plain and other end socketed with rubber ring, &

fittings conforming to ISI 14735-1999 of approved make for

drainage system pipe line, pipe shall be jointed with each

other with rubber lubricant, pipe shall be fixed on wall using

of PVC clamp of the size 110 mm diametre x 149 mm length x

145 mm heigh at every 2000 mm center to center or shall be

concealed in walls as directed including necessary fittings

such as bends, shoes etc. including testing of pipes and joints

and jointed with adhesive solvent cement including cost of all

materials.

[15] Providing and fixing MS Z clamp on Wall or celling for Pipe 34.00 Nos 75.75

Fitting including all type necessary fittings and accessory etc.

completed as per directed engineer in charge.

[16] Providing and fixing PVC SWR Nahni trap IS 14735 for drain - 2.00 Nos 558.36

100 mm diameter with jali of the following nominal diameter

of self cleansing design with C.I scread down or hinged grating

including the cost of cutting and making good the walls.

[17] Providing & Fixing Premium quality approved make like 1.00 Nos 3175.25

Jaquar / ESSCO or equivalent Bib cock with wall flange

including labour, material, trasportation etc.complete as

directed by engineer incharge.

[18] Providing & Fixing Premium quality approved make like 1.00 Nos 4015.39

Jaquar / ESSCO or equivalent Quarter Turn Pillar Cock for

Basin including labour, material, trasportation etc.complete as

directed by engineer incharge..

[19] Providing & Fixing Premium quality approved make like 1.00 Nos 10221.25

Jaquar / ESSCO or equivalent Table top wash basin of 565 x

425 x 140 mm with hole for pillar tap with C.I or M.S brackets

painted white including cutting cutting holes and making

goods the same include. C.P. brass waste and waste

pipes.including labour, material, trasportation etc.complete as

directed by engineer incharge.

[20] Providing & Fixing Premium quality approved make like 1.00 Nos 5846.01

Jaquar / ESSCO or equivalent Flush Valve dual flow 40 mm

size having Conceled body with Exposed shut of provision and

100 mm square plate (3 to 6 liter per flushing)including

labour, material, trasportation etc.complete as directed by

engineer incharge.

Description of Item

Item Rate In

(with brief specification and reference to book Quantity Unit Amount

No. Figure

of specifications)

[21] Providing & Fixing Premium quality approved make like 1.00 Nos 18460.28

Jaquar / ESSCO or equivalent Wall Hung European type W C

Pan with in Built Jet, PP Soft closed seat cover, Hinges, Dual

Flush cistern, fixing accessary etc.complete of size 365 x 525 x

400 mm or 375 x 520 x 400 mm including cutting cutting

holes and making goods the same including labour, material,

trasportation etc.complete as directed by engineer incharge.

[22] Providing & Fixing Premium quality approved make like 1.00 Nos 6010.76

Jaquar / ESSCO or equivalent Urinal of size 355 x 340 x

mm connetcting with PVC waste pipe, Trap etc complete

including labour, material, trasportation etc.complete as

directed by engineer incharge.

[23] Providing and fixing 600mm x 450mm bevelled edge mirrror 1.00 Nos 833.73

of superior glass mounted on 6mm thick A.C. sheet or

plywood sheet and fixing to wooden pluge with C.P. brass

screws and washers.

[24] Providing and fixing C.P. brass towel rail comlete with C.P. 1.00 Nos 603.19

brass brackets fixed to wooden plugs with C.P. brass scews (B)

600mm x 20mm size.

[25] Providing and fixing S.W. gully trap with C.I. grating brick 1.00 Each 1246.92

masonry chamber and water tight C.I. cover with frame of

300mm x 300mm size (inside) with standard weight (i)

Square mouth traps (B) 150mm x 100mm size P of R type

[26] Providing & Fixing Premium quality approved make like 1.00 Nos 2365.05

Jaquar / ESSCO or equivalent Angular stop cock with wall

flange including labour, material, trasportation etc.complete

as directed by engineer incharge.

[27] Providing & Fixing Premium quality approved make like 1.00 Nos 7863.86

Jaquar / ESSCO or equivalent Wall mixer having 3-in-1 system

with provision for both hand shower & over head shower

complete with 115 mm long bend pipe, connecting legs and

wall flange (excluding hand and over head shower) including

labour, material, trasportation etc.complete as directed by

engineer incharge.

[28] Providing & Fixing Premium quality approved make like 1.00 Nos 4037.86

Jaquar / ESSCO or equivalent Over Head Shower 105 mm x

105 mm Square or 105 mm Dia Round Shap Single Flow with

Air effect (ABS body chorme plated with Grey Face Plate) with

Rubit cleaning system including labour, material,

trasportation etc.complete as directed by engineer incharge.

[29] Providing & Fixing Premium quality approved make like 1.00 Nos 2775.36

Jaquar / ESSCO or equivalent Maze hand shower of 95 mm

round or 95 mm x 95 mm square shape single flow (face plate

stainless steel and ABS body)with Rubit cleaning system

including labour, material, trasportation etc.complete as

directed by engineer incharge.

[30] Providing and laying Vitrified tiles 8 to 10 mm thick, 36'' x 36'' 90.00 Sqm 1484.61

in flooring treads of steps and landing laid on a bed of 12mm

thick cement mortar 1:3 (1-cement : 3-coarse sand) finishing

with flush pointing in white cement.

[31] Providing and laying Mirror polished Machine polished Green 14.00 Sqm 2629.03

Marble stone slab 18mm (Average) thick for doors & windows

sill & Jams clading as per design including full moulded round

front steps & 1cm nosing & necessary groove on trads of steps

;laid on 20mm thick cement mortar 1:6 (1 cement : 6 coarse

sand) jointed with gray cement sluury including rubbing and

polsihing etc. complete.for Doors / windows sill & jams

Description of Item

Item Rate In

(with brief specification and reference to book Quantity Unit Amount

No. Figure

of specifications)

[32] Providing and fixing Anodized Alluminum Section Jindal 9.00 Sqm 2809.82

Deluxe Sliding Window System 27mm series THREE track

window as shown in elevation, shutter with 5mm thick

transparent plain float glass, with transparent silicon sealant

with allu. anosized coated fittings and fixture etc complete.

[33] Removing dry or oil bound distemper by a washing and 119.00 Sqm 10.99

scraping and sand papering the wall surface smooth including

necessary repairs to scratches complete.

[34] Wall painting with Applying two coats of putty & two coats of 119.00 Sqm 160.01

primer of approved brand & Three coats of plastic emulsion

paint of approved brand and manufacture on undecorated

wall surface to give an even shade including throughly

brushing the surface free from mortar droppings and other

foreign matter and sand papered smooth.

[35] Both side laminate finish flush door.Providing Material & 5.00 Sqm 4057.17

Labour charge for making laminate finish Flush Door (finished

size of door is 40 mm) of size 975 mm x 2400 mm considering

waterproof flush door sheet of 38 mm thkness covered both

side by 1.0 mm thick Laminate supprted by SS -314 finish

hinges. All exposed framing of 65 mm x12 mm made by teak

wood bidding complete with polish. Finishing with all

necessary hardwares like handles, conceal mortise locks,

cylinders with 6 nos of keys, stopers, tower bolt, MS nails, SS-

314 screws etc. as per details given in drawing and as per

instructions of Architect/Engineer In charge. Please see the

Attached Make List for Apporoved Makes.

[36] Providing and Arranging side unit with top 40mm overall 6.00 Nos 17727.34

thickness made from 18 mm thick MR grade plywood with

4.00 mm thick veneer on top with melamine finished polish.

Side and drawer made of 18mm thick MR grade plywood with

4.00 mm thick veneer with melamine finished polish and

inside 0.8mm thick balancing laminate of approved shade.

Teakwood border with melamine finished polish of specified

size to be provided all around the borders of plywood. Drawer

run on Ebco make telescopic channel with Godrej make lock

with Two keys and shutter fixed with auto hinges incld. all

necessary fixtures and fastening as approved and back of the

unit with 6mm thick MR grade playwood with 0.8 mm thick

laminate of approved shade with nylon bullet including all

materials and labour etc. Complete as per drawing and

instruction of Engineer-in charge . Side table - Veneer -

[37] Providing and Arranging Cushioned Seat & back, PP outer 4.00 Nos 8743.31

back cover, PP arms, Single back lock, Push back mechanism,

gas lift for seat height adjustment, five prong Nylon base with

twin wheel nylon castor.Including all materials and labour

etc.Complete as per drawing and instruction of engineer-in

charge.Size : Max.Hight 1020mm Min.Height 930 mm, Seat :

500mm x 460mm, Back: 500mm x 440 mm Low Back Chair

:Priviya-7003

Description of Item

Item Rate In

(with brief specification and reference to book Quantity Unit Amount

No. Figure

of specifications)

[38] Providing and Arranging PREMIUM EXECUTIVE REVOLVING 1.00 Nos 35280.24

CHAIR (Meduim Back) Sigma chrome Base with Knee Tilt

Synchro Mechanism with Any Position back Lock, Seat & Back -

Made from High Density U - FOAM, Armrest in two pieces

12mm outer boire cut veneer polyurathine High gloass &

6mm hot pressed plywood upholstered pad which fix with

seat .Including all materials and labour etc.Complete as per

drawing and instruction of engineer-in charge.Size :

max.Height : 1105 mm to Min. 1015mm, Seat : 660mm x

660mm, back 510 mm x 600 mm Molto 562 Meduim Back

[39] Providind and Arranging Medium Back Chair - Seat & back 7.00 Nos 15219.83

cushioned on ply, aluminum die casted arms with cushioned

pad, Synchro mechanism with single back lock, gas lift,

chrome base.Including all materials and labour etc.complete

as per detail drawing and instruction of engineer-in

charge.Size : max.Height 1070mm, Min.970mm, Seat: 490mm

x 510 mm, Back : 640 mm x 510 mm MARCO 1002 Meduim

back Chairs

[40] Providing And Arranging table for chamber having overall 1.00 Nos 49584.87

thickness of Top 40 mm (18+18+4mm)18 mm thick MR Grade

plywood and 4.00 mm thick veneer at top with melamine

polish finish including 8mm thick back painted glass. Top to

be made from 75mm x 50 mm Indian teak wood with half

round moulded on long side with melamine polish. Leg 50 mm

x 50 mm x 1.6 mm thick CRCA Square pipe and supporting

pipe 50 mm x 25mm x 1.8 mm finishing with epoxy powder

coated 50 micron with leveller. Appron having 18 mm thick

MR Grade plywood with 4.00 mm thick veneer having

melamine polish finish. Drawer Unit-450 x 550 x 600 mm

having all Structure 18 mm thick MR grade plywood with

veneer and teakwood border of specified size with melamine

polish finish. Drawers (3 Nos) slides on Ebco make telescopic

channel with Godrej make lock with two keys and necessary

fixtures and fastening as approved with balancing laminate

inside 0.8 mm thick of approved shade including all materials

and labour etc. Complete as per drawing and instruction of

engineer-in charge. Side Unit to be provided saparetly.Judge

Table with MDU veneer Size :- 1800mm x 900mm x 750mm

[41] Providing and Arranging side unit with top 40mm overall 5.00 Nos 27475.90

thickness made from 18 mm thick MR grade plywood with

4.00 mm thick veneer on top with melamine finished polish.

Side and drawer made of 18mm thick MR grade plywood with

4.00 mm thick veneer with melamine finished polish and

inside 0.8mm thick balancing laminate of approved shade.

Teakwood border with melamine finished polish of specified

size to be provided all around the borders of plywood. Drawer

run on Ebco make telescopic channel with Godrej make lock

with Two keys and shutter fixed with auto hinges incld. all

necessary fixtures and fastening as approved and back of the

unit with 6mm thick MR grade playwood with 0.8 mm thick

laminate of approved shade with nylon bullet including all

materials and labour etc. Complete as per drawing and

instruction of Engineer-in charge .Side Table veneer Size :-

Description of Item

Item Rate In

(with brief specification and reference to book Quantity Unit Amount

No. Figure

of specifications)

[42] Providing, fixing & Arranging linear workstation as per 6.00 Nos 25869.51

drawing, framing the skeleton with 18mm + 18mm thick

vertical and horizontal plywood patti both side cover with

6mm thick plywood for grooving design and finishing with

hole/face plate for conduit pipes of eletcrical/networking

cables with openable stud from horizontal partition.vertical

support of 18mm + 18mm thick double plywood cover with

1mm laminate finish including 18mm thick curvica on

exposed edges.Fitted 25mm thick (Partical board, interior

grade)post forming laminated top, fixed with metal clamps

including suspended metal keyboard-mouse tray fixed with

telescopic channel, cable manager and separate drawer with

lock, telescopic channel and box, made from 18mm plywood

with 1mm outside and 0.8mm inside laminate as well as

18mm post forming outside of shutter with auto hinges of

hafele or equivalent for left or right side.Drawer run on Ebco

make telescopic channel with Godrej make lock with Two

keys.Providing and fixing of softboard(12mm thick)finished

with tapestry of good quality.partition hight

1200mm.Including all materials and labour etc.Complete as

per drawing and instruction of engineer-in charge. W/S

1200mm X 750mm x 1050mm with MDU (P.A)

[43] Providing and supply The chair pipe structure of MS CRCA 5.00 Nos 4533.57

finish 16 gauge round pipe having a diameter of 32 mm, the

understructure frame tubular structure with stability for

proper balance, the seat and back is supported on spring

structure, the backrest armrest and seat dimensioned and

curved from an ergonomics point of view, the frame and

spring-seat structure prepared from MIG welding process &

powder coated, proper high-density rubber bush provided at

all four legs, seat & back upholstered with fabric.

[44] Blinds assemblies are to be supplied & installed in all 9.00 Nos 2147.26

windows with great precision. It should be water resitant and

fitted on alluminium headrails duly power coated and fitted

with stainless steel drive rods. Manual operated and should

have ISI mark.Providing & fixing roller type window curtains

of Deck, Aerolux, Siddhi or eq. make including same brand

channel - chain mechanism, synthetic black out fabric of

approved colour & design, silver coated backside, same fabric

plated pelmet etc. with all necessary fittings etc. complete as

per Architect/ Site engineer's instructions as per sized

per engineer in charge and chief architect.

[45] Providing and Arranging book storage having top 18 mm thick 5.00 Nos 54524.67

MR grade plywood with 4.00 mm thick veneer melamine

polish finish with 0.8 mm balancing laminate.Shelves made of

12 mm thick clear float glass with all edge polish. Side and

shutter made of 18mm thick MR grade plywood with 4.00 mm

thick veneer melamine polish finish with 6mm thick clear float

glass and Lock and nylon bullet.louver on bottom made of

solid wood fram for ups exsos including all necessary fixtures

and fastenings as approved, incld. all materials and labour

etc.Complete as per drawing and instruction of engineer-in

charge (with T.W. border patti with melamine polish) Glass

Storage with UPS 1200mm x 450mm x 1800mm

Description of Item

Item Rate In

(with brief specification and reference to book Quantity Unit Amount

No. Figure

of specifications)

[46] Providing and fixing Powder coated aluminum standard 61.00 Sqm 2097.06

extruded section for partly panneled and partly glazed type

partition of 63.50 mm x 38.10 mm x 1.95 mm or as specified

drawing or as directed having panels of 12mm thick both side

exterior grade prelaminated particle board of approved make

and shade including fixing in true line and level at bottom

panel and 5 mm thick coloured float glass at top panels

including all fixtures and fastenings like glazing clips, rubber

gasket, hardware and labour as required etc. complete.

[47] Sofa- 3- seater, 2 seater and single seater sofa with 19mm 4.00 Rmt 25250.00

water & termite proof ISI grade plywood under strcture with

necessary kiln dried & treated C.P.Teak wood supports & legs

wherever required. It shall be covered with 45 density HR

foam with required thickness as per design in seat, back and

handle respectively. This should be again covered with

Kg/M2 and 14 mm thick HR foam with madarpat cover on it &

upholstered with fabric of suggested shade & finish in seat

and back on all open visible sides. Wooden legs are melamine

polished with two coats as per sized specified in detail

charge and chief architect.

[48] VINEER & CORIAN FINISH KING SIZE BED . :- 6' X 6.5'=3.62 SQ 1.00 Nos 30300.00

MT Providing Material & Labour charge for making king size

bed having size of 1800 mm x 2100 mm made up by 19 mm

Thk. (double - sandwich) B.W.P. plywood as pheripherial

supports at all four sides & horizontal middle support with all

necessary proper solution. Having 350 (200+150) mm high

base box made with 19 mm thk BWP ply . Top of bed is

covered by 19 mm thk BWP ply & bottom is covered with

mm thk BWP ply. Bed corners are supported with necessary

kiln dried & treated CP teakwood supports, round edge wood

support finish with vineer pu polish .Top & bottom ply of bed

& inner side ply is covered with 1.5 mm thk laminate. use of

TEAK wood bidding of appropriate size at each joints All

exposed surfaces of bed is covered with 4 mm thk vineer

finished with PU police. At Legside ply is partly cover with

mm corian finish with cutting, pasting & buffing as per

suggested pattern. Sizes and patterns may be varies as

suggested by architect. All fixtures and fastning must be

approved by architect/EOI as per given standard make.

Complete with all hardwares like MS Nails & SS-304 screws

etc. All Details as per shown in detail drawings & as per

instructions of architect / incharge engineer. Please see the

Attached Make List for Apporoved Makes.

[49] Providing and erecting Inverter based approved make split air- 2.00 Nos 36819.55

conditioning unit consisting of condensing unit with variable

speed fan motor, inverter type hermetically sealed rotary

compressor with accessories etc. duly connected separately

erected evaporating unit and blower motor with its

accessories by means of extra supplied proper insulated

copper tubing, drain PVC pipes suitable for (cost includes Eco

Friendly green gas charging and 15A plug top & Remote

Control & MS Stand) with necessary core cutting. (1)For ISEER

Range (KWH/KWH)(3.1 to 3.99) (B) for 1.5 ton capacity

Description of Item

Item Rate In

(with brief specification and reference to book Quantity Unit Amount

No. Figure

of specifications)

[50] Supplying and erecting insulated pair of soft copper tubing 10.00 Rmt 965.56

open or concealed including power and control cable,

necessary PVC drain pipes for Split AC machine up to 4 TR

Total Rs.

I/We am/are willing to carry out the work at…..........…% above/below percent (Should be written in figures

and words) of the estimated rate mentioned above. Amount of my /our tender works out as under.

Estimated amount put to tender Estimated amount put to tender

Deduct………% below Add………% Above

In words In words

1. The Contractor shall exhibit a board with detailed specification and details of work as directed by the

Engineer-In-Charge for which no extra payment shall be made.

2. The labour cess will be deducted as per prevailing rules i.e. 1% of the work done.

3. GST and Income tax TDS will be deducted at a source while making payments of bills

4. In all R.C.C. Items in Rate Analysis Standard Cement Consumption has been taken as per Govt. G.R.: PRC-

10/2017 Cement Consumption/16/C Date:11/05/2017 as stated in S.O.R. therefore in R.C.C. items where

there is a change as per actual mix design the cost of difference of cement consumption have been deducted

from the rate of original item at the rate of input rate mentioned in all the tender.

5. Credit of Dismantal Material amount of Rs. NA must be recovered from Contractor's R.A Bill.

6. Payment will be given only if the material testing result is satisfactory.Testing of material shall be done as

per statement attached with specification

Dated Signature Deputy Executive Engineer Executive Engineer

the Contractor. R & B Sub Division Kheda R & B Division

Nadiad Nadiad