BID DOCUMENT FOR CONSTRUCTION OF ABC CENTER (DOG SHELTER SHED, ADMIN BLOCK, PLUMBING & ELECTRIFICATION) FOR KARAMSAD ANAND MUNICIPAL CORPORATION

// SCHEDULE - B //

Name of Work :- Bid Document for Construction of ABC Center (Dog Shelter Shed, Admin Block, Plumbing & Electrification) for

Karamsad Anand Municipal Corporation

Estimated Estimated Rates Total Amount

Estimated Estimated Rates Total Amount

but may be Item of Work Unit According to

more or estimated quantities

less In Figure In Word

Excavation for foundation upto 1.5 m depth including

Rupees One Hundred

sorting out and stacking of useful materials and disposing

1 273.00 122.94 Twenty Two and Ninety Cu.m.

off the excavated stuff upto 50 Meter lead.(A) Loose or soft

Four Paisas Only

Excavation for foundation for depth from 1.5 m to 3.0 m

Rupees One Hundred

including sorting out and stacking of useful materials and

2 35.10 136.30 Thirty Six and Thirty Cu.m.

disposing off the excavated stuff upto 50 Meter lead.(A)

Loose or soft soil

Providing and laying cement concrete 1:3:6 (1-Cement : 3- Rupees Three

coarse sand : 6- hand broken stone aggregates 40 Thousand Ninety Five

mmnominal size) and curing complete excluding cost of and Twenty Five Paisas

formwork in (A) Foundation and Plinth Only

Providing and laying controlled cement concrete M 250 and

Rupees Four Thousand

curing complete including the cost of formwork but

Six Hundred Twenty

4 102.30 excluding the cost of reinforcement for R.C.C work in 4623.48 Cu.m.

Three and Forty Eight

foundation footing base. (A) Foundations footing base of

columns and mass concrete

Providing and laying controlled cement concrete M 250 and

Rupees Five Thousand

curing complete including the cost of formwork but

5 51.70 5999.00 Nine Hundred Ninety Cu.m.

excluding the cost of reinforcement for R.C.C work in Ground

Brick work using common burnt clay building bricks having

Rupees Four Thousand

crushing strength not less than 35 kg./Sq.Cm. in foundation

6 86.50 4245.09 Two Hundred Forty Five Cu.m.

and plinth in Cement Mortar 1:5. (1- Cement : 5 -fine

and Nine Paisas Only

sand)(B) Conventional

Providing and laying controlled cement concrete M 250 and Rupees Five Thousand

curing complete including the cost of formwork but Seven Hundred Eighty

excluding the cost of reinforcement for R.C.C work in RCC Four and Seven Paisas

Copping for all floor. Only

Filling availabale excavated earth (excluding rock) in trenches

Rupees One Hundred

plinth, sides of founadions etc. in layers not exceeding 20cm

8 166.50 136.92 Thirty Six and Ninety Cu.m.

in depth consolidating each depo sited layer by ramming

Two Paisas Only

Filling in foundation and plinth with murrum or selected soil Rupees Two Hundred

9 796.10 in layers of 20cm thickness including watering ramming and 294.38 Ninety Four and Thirty Cu.m

consolidating etc. complete Eight Paisas Only

Carring out plinth treatment to post construction existing

structure by spraying chemical solution for termite control

treatment including labour and material consistment with

I.S.I specification. Using ehlordene and ehiorpurfiles 20 EC.

Rupees One Hundred

As Per 6131_paret-ll eonsentration Weight one percent is

10 663.40 124.35 Twenty Four and Thirty Sqm

recommended i.e one litre 20 Ee chemical emulsion with

Five Paisas Only

liter give 1 % concrentration inclusive of one litre chemical

emulsion appication at the rate of 5 Litre chemical I Sqm of

surface is recommended as per I.S

Providing and laying controlled cement concrete M 250 and Rupees Seven

curing complete including the cost of formwork but Thousand Three

11 32.50 excluding the cost of reinforcement for R.C.C work in 7398.65 Hundred Ninety Eight Cu.m.

Column for all floor. and Sixty Five Paisas

Providing and laying controlled cement concrete M 250 and Rupees Six Thousand

curing complete including the cost of formwork but Two Hundred Twenty

excluding the cost of reinforcement for R.C.C work in Slab Seven and Thirty Six

Beam for all Floors.. Paisas Only

Providing and laying controlled cement concrete M 250 and Rupees Six Thousand

curing complete including the cost of formwork but Four Hundred Fifteen

excluding the cost of reinforcement for R.C.C work in RCC and Ninety Two Paisas

Lintal for all floor. Only

Providing and laying controlled cement concrete M 250 and Rupees Six Thousand

curing complete including the cost of formwork but Nine Hundred Thirty

excluding the cost of reinforcement for R.C.C work in RCC One and Two Paisas

Slab for all floor. Only

Providing and laying controlled cement concrete M 250 and Rupees Seven

curing complete including the cost of formwork but Thousand Five Hundred

excluding the cost of reinforcement for R.C.C work in RCC Ninety Seven and Two

Chhajja for all floor. Paisas Only

Providing and laying controlled cement concrete M 200 and

curing complete including the cost of formwork but Rupees Nine Thousand

16 3.00 excluding the cost of reinforcement for R.C.C work in RCC 9641.16 Six Hundred Forty One Cu.m.

Stair for Ground floor. and Sixteen Paisas Only

Providing TMT Bar FE 500D reinforcement for R.C.C. work Rupees Seventy Seven

17 25333.86 including bending, binding and placing in position complete 77.29 and Twenty Nine Paisas Kg

upto floor two level Only

Brick work using common burnt clay building bricks having

Rupees Four Thousand

crushing strength not less than 35 kg./Sq.Cm. in

Five Hundred Twenty Six

18 129.00 superstructure above plinth level upto floor two level in 4526.81 Cu.m.

and Eighty One Paisas

Cement Mortar 1:5. (1- Cement : 5 -fine sand)(B)

Half brick masonry in common brunt clay building bricks Rupees Six Hundred

19 344.10 having crushing strength not less than 35 Kg/Sq.Cm. in 673.22 Seventy Three and Sqm

Cement mortar 1:5 (1- Cement : 5 -coarse sand ) in Twenty Two Paisas Only

Providing 15mm thick cement plaster in single coat on

Rough (Similar)side of single or half brick walls for interior Rupees Two Hundred

20 360.90 plastering upto floor two level and finished even and smooth 203.78 Three and Seventy Eight Sqm

in.(I) cement mortar 1 :3 (1 cement : 3 sand) Inside Plaster Paisas Only

Providing 10mm thick cement plaster in single coat on

Rough (Similar)side of cellings and soffits of stairs upto floor Rupees One Hundred

21 113.40 two level instead of plastering on on cellings and soffits of 177.72 Seventy Seven and Sqm

stairs and finished even and smooth in.(I) cement mortar 1 : Seventy Two Paisas Only

3 (1 cement : 3 sand) For celling

20mm thick sand faced cement plaster on walls upto height

10 metres above ground level consisting of 12mm thick Rupees Three Hundred

22 1787.50 backing coat of C.M. 1:3 (1-cement : 3-sand) and 8mm thick 352.44 Fifty Two and Forty Four Sqm

finishing coat of C.M. 1:1 (1-cement : 1-sand) etc. complete Paisas Only

Providing Chicken wire mesh 16 x24 in plaster Rupees One Hundred

23 36.10 184.02 Eighty Four and Two Sqm

Finishing wall with weather proof exterior emulsion paint on

wall surface (two coats) to give an required shape even Rupees One Hundred

24 1787.50 shade after thoroughly brushing the surface to remove all 120.26 Twenty and Twenty Six Sqm

dirt, and remains of loose powdered materials.etc complete Paisas Only

Applying two coats of Birla or Asian acrylic lappy ( putty)

and two coats of primer of approved brand and

manufacture on new wall surface to give an even shade Rupees Forty and Fifty

including thoroughly brushing the surface free from mortar Nine Paisas Only

dropping and other foreign matter and sand papered

Wall painting (two coats) with plastic emulsion paint of

approved brand and manufacture on undecorated wall

Rupees Eighty Two and

26 474.30 surface to give an even shade including throughly brushing 82.85 Sqm

Eighty Five Paisas Only

the surface free from mortar droppings and other foreign

matter and sand papered smooth.

Providing and fixing eco-friendly light weight calcium silicate

false ceiling tiles having Tegular edge & 15 mm Thick

Densified edges on the Tile Periphery for Extra Strength The

Light weight calcium silicate ceiling tiles shall have , light

reflection 85% non-combustible as per B.S. 476 part IV,

100% humidity resistance and also having thermal

conductivity0.043° w/m KC.for the best thermal Insulation . Rupees One Thousand

The Light weight calcium Silicate tile shall be of approved Six Hundred Seventy

27 114.00 texture Fine fissured/ Spintone/Cosmos having NRC value of 1674.15 Sqm

Four and Fifteen Paisas

0.5 & Globe having NRC value of 0.75 NRC or equivalent of Only

size 595 X 595 mm to be laid on true horizontal level

suspended inter locking metal grid of hot dipped galvanized

steel sections (galvanizing @120 grams per sqm including

both side) consisting of main ‘T’ runner suitably spaced at

joints to get required length and size of 24X38mm made

from 0.30 mm thick (minimum) sheet,

1200mm centre to centre, and cross ‘T’ of size 24X28mm

made out of 0.33mm (Minimum) sheet spaced 1200mm

along spaced between main ‘T’ at 600mm centre to centre to

form agrid of 1200X600mm and secondary cross ’T’ of length

600mm and size 24x28mm made of 0.30 mm thick

(Minimum) sheet to be interlocked at middle of the

1200X600mm panel to form grid of size 600X600mm resting

on periphery walls/partitions on a perimeter wall angle pre-

coated steel of size (24X24X3000mm made of 0.40mm thick

(minimum) sheet with the help of rawl plugs at 450mm

centre to centre with 25mm long dry wall screws @ 230mm

interval and laying 15mm thick Densified edges light weight

calcium silicate ceiling tiles of approved texture (Fine

Fissured/Cosmos/Spintone) in the grid including,

cutting /making opening for services like diffusers, grills,

light fittings, fixtures, smoke detectors etc., wherever

required, Main ‘T’ runners to be suspended from ceiling

using G.I. slotted cleats of size 25X35X1.6mm fixed to ceiling

with 12.5mm dia and 50mm long dash fasteners, 4mm G.I.

adjustable rods with galvanized steel level clips of size

85X30X0.8mm, spaced at 1200mm centre to centre long

main ‘T’ bottom exposed with 24mm of all T-sections shall

be pre-painted with polyester baked paint, for all heights, as

per specifications, drawings and as directed by engineer-in-

Note:- Only calcium silicate false ceiling area will be

measured from wall to wall. No deduction shall be made for

exposed frames/opening (cut outs) having area less than

0.30 sqm. The calcium silicate ceiling tiles shall have NRC.

Value of 0.50 (Minimum) for Fine fissured/Spintone/Cosmos

and 0.75 NRC for Globe, light reflection 85% non-

combustible as per B.S. 476 part IV, 100% humidity

resistance and also having thermal conductivity. 0.043° w/m

KC.for the best thermal Insulation.

P & L 24" x 24" vitrified 8 mm thick tile flooring over 20 mm

(average) base of cement mortar 1:6 ( 1 cement: 6 coarse

Rupees One Thousand

sand) on new surface or fixing on existing flooring by

Four Hundred Sixty

28 125.40 adhesive material including dismentaling of existing flooring 1467.72 Sqm

Seven and Seventy Two

and jointed with color cement slurry including finised with

flush pointing & cleaning the surface etc. complete for

Providing and laying white glazed tiles 6mm thick in skitring

risers of steps and dado on 10 mm thick cement plaster 1 : 3 Rupees Nine Hundred

29 47.90 (1 cement : 3 coarse sand) and pointing in white cement 985.47 Eighty Five and Forty Sqm

jointed with white cement slurry. Seven Paisas Only

Providing and laying Mirror polished Machine polished

Granite stone slab 18mm (Average) thick as per design incl.

full moulded round front edge on 20 mm thick cement

Thousand Six Hundred

30 54.20 mortar 1 : 6 (1 cement : 6 coarse sand) jointed with grey 3692.56 Sqm

Ninety Two and Fifty Six

cement slurry including rubbing and polishing as per the

instruction of Engineer in charge etc. complete

Providing & fixing 35 mm thick Single shutter flush door

solid core finished with both side 1 mm thick lamination Rupees Five Thousand

both side, of natural wood grain shade as approved by this Six Hundred Eight and

office as per the instruction of Engineer in charge.with Ninety Three Paisas

necessary SS hinges and fixtures etc . complete. Only

Providing and fixing FRP frame size 125x65 mm and 35mm

thick FRP shutter having extra reinforcement on sides &

edges in polish finish. The core of the shutter & frame is to

be filed up with injected polyurethene foam done in situ

Rupees Two Thousand

alongwith embedded wooden pieces for stiffening & also

32 3.20 2615.04 Six Hundred Fifteen and Sqm

taking hinges & fintures. The whole FRP frame & shutter is

Four Paisas Only

to be water proof weather proof, termite proof & resistance

to mild acid/alkali. Rates are to be inclusive of S.S hinges

with necessary screws & alluminium S.S fixtures & fastenings

& fastener sleeve

Providing and fixing window having extruded aluminum

Colour Powder Coated section frame main outer size 95mm

x 24mm x 1.17mm @ wt.of 0.738 Kg/mt, horizontal Three

track member size 92mm x 31.75mm x 1.30mm @ Wt.1.07

Kg/mt, vertical member of size 92mm x 31.75mm x 1.50mm

Rupees One Thousand

,@ Wt. 1.06 Kg/mt with sliding shutters of horizontal

Five Hundred Ninety

33 19.50 member size 40 mmx18mm x1.29mm @ wt.of 0.456 Kg/mt, 1591.87 Sqm

One and Eighty Seven

vertical member of size 40mm x 18mm x 1.29 mm @ wt.of

0.456Kg/mt with 5 mm thick transparent bronze colour

tinted float glass with powder coated aluminum fittings and

fixtures and transparent silicon sealant glass fixing to frame

as per details etc

Providing and fixing standared extruded of alluminium

Rupees One Thousand

section of size 63mm x 38.10mm x 1.2mm , @ Wt.

One Hundred Seventy

34 0.80 Kg/mt with colour Powder Coated alluminium frame for 1175.56 Sqm

Five and Fifty Six Paisas

ventilation with 5 mm thick frosted glass as details etc

complete for Ventilation

Providing and fixing M.S. Grill of required pattern for

Window grill with M.S pipe/Angle/flat at required spacings Rupees One Hundred

35 17898.90 and frame alround gate with one coat of applying oil based 112.72 Twelve and Seventy Two Kg

priming coat and painting two coat of oil paints on gate etc. Paisas Only

Providing and fixing stainless steel railing made from

anticorrosive 304 grade S S pipe of 50mm dia ( 16 Gauge) as

hand rail with S S 304 grade and 32 x 32 mm square pipe (16

Rupees Two Thousand

Gauge ) as a vertical support fixed in RCC slab/ steps of stair

Seven Hundred Eighty

36 15.00 at 1.20mt c/c including three horizontal S S pipe of 16mm 2789.72 Rmt

Nine and Seventy Two

dia (16 Gauge) at equal distance including required all

accessories and labour charges as per detailed drawing as

per directed engineer in charge etc. complete.

Filling on Terrace with brick bats chhara in layers of 20cm. Rupees Six Hundred

37 12.80 Thickness including watering, ramming and consolidating 621.46 Twenty One and Forty Cu.m.

etc. complete Six Paisas Only

Providing and laying broken chine mosaic flooring for

terrace using 12 mm to 20 mm broken pieces of glazed tiles

to be laid over cement mortar 1:3 to plain or slope and to be

Rupees Seven Hundred

tempered to bring mortar creme out upto surface using

38 127.80 779.70 Seventy Nine and Sqm

white cement including rounding off junctions and

Seventy Paisas Only

extending them upto 15 cm along the wall, with

Waterproofing, clearing with water and oxalic acid etc. as

Providing cement vata (10 cm x 10 cm size) quarter round in Rupees Twenty Four

39 46.50 cement mortar 1 :1 including neat cement finishing watering 24.28 and Twenty Eight Paisas Rmt

etc. complete. Only

Providing and laying polished Kota stone slab flooring over

20mm (Average) thick base of cement mortar 1:6 (1-cement :

6-coarse sand) or L.M. 1.1.5 (1-Lime putty :1.5 - coarse sand) Rupees One Thousand

40 547.70 laid over and jointed with grey cement slurry mixed with 1019.39 Nineteen and Thirty Sqm

pigment to match the shade of slab including rubbing and Nine Paisas Only

polishing etc. complete. (A) 25mm thick

Providing and fixing rolling shutters of approved make made

of 80 mm wide M.S. laths inter-locked together through

their entire length and jointed together at the ends by end

locks mounted on specially designed pipe shaft with bracket Rupees Four Thousand

41 21.20 plates, guide channels and arragements for inside and 4546.01 Five Hundred Forty Six Sqm

outside locking with push-pull operation including the cost and One Paisas Only

of hood cover and spring etc. complete.(A) Shutters having

width below 3.5 M.

Providing corrugated G.I. sheet of class-3 roofing fixed with

glavanished iron J or L Hooks, Bolts and nuts 8mm diameter

Rupees Seven Hundred

with bitumen and G.I. limpet washer or G.I. limpet washer.

42 623.50 734.19 Thirty Four and Sqm

filled with white lead complete excluding the cost of purlins,

Nineteen Paisas Only

Rafters and Trusses.(1) 0.80 mm thick sheet.

Structural steel work ( Confirming to IS 4923-1997) riveted,

boltedor welded in builtup for all type sections, in framed

work,including cutting, hoisting, fixing in position and Rupees One Hundred

43 12596.70 aincluding applying a priming coat of red lead paint and two 137.56 Thirty Seven and Fifty Kg

coats of oil painting all complete as per the structural Six Paisas Only

designs and directions of Engineer in charge.

Providing and fixing in position cowel vent to pipes. (B) 75 Rupees Three Hundred

44 2.00 mm. dia. 393.04 Ninety Three and Four No.

Providing and fixing in position cowel vent to pipes. (C) 100 Rupees Five Hundred

45 2.00 mm. dia. 505.17 Five and Seventeen No.

Providing and fixing cast iron (spun) nahni trap of the

following nominal diamter of self cleaning design with C.I Rupees Six Hundred

46 10.00 screwed down or hinged grating including cost of cutting 634.71 Thirty Four and Seventy No.

and making good the walls and floors 100 mm. inlet and 50 One Paisas Only

Providing and fixing 100 mm sand cast iron grating for gully,

Rupees Thirty Six and

47 2.00 floor or nahni trap. 36.98 No.

Ninety Eight Paisas Only

Providing and fixing screw down bib taps of follwing size (A) Rupees Two Hundred

48 12.00 Brass screw down bib tap polished bright. (ii) 20 mm dia 214.81 Fourteen and Eighty No.

One Paisas Only

Providing and fixing screw down stop tap (B) 20 mm. dia. Rupees Two Hundred

49 2.00 223.81 Twenty Three and Eighty No.

One Paisas Only

Providing and fixing gun metal check or non return fullway Rupees Four Hundred

50 1.00 wheel valve (C) 25 mm. dia. 420.63 Twenty and Sixty Three No.

Providing and fixing gun metal check or non return fullway Rupees Two Hundred

51 1.00 wheel valve (B) 20 mm. dia. 203.82 Three and Eighty Two No.

Providing and fixing chromium plated brass half turn flush

Rupees Two Hundred

cock of approved quality including fixing in pipe line etc.

52 2.00 263.77 Sixty Three and Seventy No.

complete (ii) 25 mm dia

Seven Paisas Only

Providing and fixing ball cock of approved quality as Rupees One Hundred

53 1.00 directed. (A) Copper Metal (i) 25 mm. dia. 132.89 Thirty Two and Eighty No.

Nine Paisas Only

Providing and fixing Urinal of approved quality including

connection with trap and with integral longitudinal flush Rupees Two Thousand

54 1.00 pipe.(A) Squating plate pattern white earthenware 2025.96 Twenty Five and Ninety No.

550mm x 300mm. Including Providing and fixing chromium Six Paisas Only

plated brass Angle cock 15mm etc complete.

Providing and fixing washbasin with single hole for pillar

tape with C.I. or M.S. brackets painted white including

cutting holes and making good thesame but excluding Rupees Two Thousand

fittings. (A) vitreous china : (ii) Flat back washbasin 550 mm x Three Hundred Twenty

400 mm size (i) IN white colour. Including Providing and One and Ninety Nine

fixing C.P brass waste, M.I.Fisher Union with chromium Paisas Only

plated brass Pillar cock 15mm etc complete.

Providing and fixing wash down water closet (European type,

W.C. Pan) with integral P or S trap including jointing the trap

with soil pipe in Cement Mortar 1:1 (1-Cement : 1-fine sand)

including providing & fixing plastic seat and cover for wash

down WC with C.P. brass hinges and rubber buffer back

plastic seat and including providing & fixing PVC Flushing Rupees Four Thousand

tank with a pair of CI or MS bracket with polythene float CP One Hundred Seventy

Brass handle unions, Angle cock including hand faccet and Six and Thirty Five Paisas

couplings for connection with inlet outlet and overflow pipes Only

40mm dia. porcelain enameled flush bend including cutting

hole in walls and making good the same connection the

flush bend, flush tank capacity of 10 Lit. with cistern and

closet of vitreous china.

Providing laying and jointing in true line and level 15mm dia.

U.P.V.C. Pipe ( SCH- 40) for cold water including fittings

make PRINCE / SUPREME / ASTRAL / FINOLEX or equivalent

as approved by Engineer In Charge. Pipe shall be fixed on Rupees Seventy Two

57 50.00 the wall with the help of clamp at every two metre C/C or 72.65 and Sixty Five Paisas Rmt

shall be concelled as directed including necessary fittings Only

etc. including testing of pipe and joints and fixing the same

with adhesive solvent, including cost of all materials.

Providing laying and jointing in true line and level 25mm dia.

U.P.V.C. Pipe ( SCH- 40) for cold water including fittings

make PRINCE / SUPREME / ASTRAL / FINOLEX or equivalent

as approved by Engineer In Charge. Pipe shall be fixed on

Rupees Ninety One and

58 50.00 the wall with the help of clamp at every two metre C/C or 91.84 Rmt

Eighty Four Paisas Only

shall be concelled as directed including necessary fittings

etc. including testing of pipe and joints and fixing the same

with adhesive solvent, including cost of all materials.

Providing laying and jointing in true line and level 40 mm

dia. U.P.V.C. Pipe (SCH - 40 ) including fittings of PRINCE /

SUPREME / ASTRAL / FINOLEX or equivalent make or as

approved by Engineer In Charge. Pipe shall be fixed on the Rupees One Hundred

59 100.00 wall with the help of clamp at every two meter C/C or shall 148.12 Forty Eight and Twelve Rmt

be concelled as directed including necessary fittings etc. Paisas Only

including testing of pipe and joints and fixing the same with

adhesive solvent, including cost of all materials.

Providing laying and jointing in true line and level

diameter U.P.V.C. SWR Type B pipe conforming to IS 13592-

1992 with one end plain and other end socketed with

rubbering, & fitting conforming to ISI 14735-1999 of

approved make for drainage system pipe line, pipe shall be

jointed with each other with rubber lubricant, pipe shall be Rupees Eight Hundred

60 50.00 fixed on wall using of PVC clamp of the size 110 mm 876.90 Seventy Six and Ninety Rmt

diameter x 149 mm length x 145 mm high at every 2000 mm Paisas Only

center to center or shall be concealed in walls as directed

including necessary fittings such as bends, shoes etc.

including testing of pies and joints and jointed with adhesive

solvent cement including cost of all materials

Providing and fixing S.W. gully trap with C.I. grating brick

Rupees One Thousand

masonary chamber and water tight C.I. cover with frame of

Two Hundred Forty Six

61 4.00 300 mm x 300 mm Size (inside) with standard weight (i) 1246.92 No.

and Ninety Two Paisas

Square mouth traps. (C) 150 mm x 100 mm size - P or R type

Constructing brick masonray road gully chamer 500 mm x

Rupees Two Thousand

450 mm x 660 mm including 500mm x 450mm C.I. horizontal

62 2.00 2017.19 Seventeen and Nineteen No.

grating with frame complete.

Constructing brick masonary road gully chamer 1100 mm x

Rupees Eight Thousand

500 mm x 775 mm including 500 mm x 450 mm C.I.

Seven Hundred Sixty

63 1.00 horizontal grating with frame and vertical grating complete. 8767.25 No.

Seven and Twenty Five

Excavation for foundation upto 1.5 m depth including

Rupees One Hundred

sorting out and stacking of useful materials and disposing

64 54.00 102.40 Two and Forty Paisas Cmt

off the excavated stuff upto 50 Meter lead.(A) Loose or soft

Supplying and fixing reinforced concrete heavy duty non-

pressure pipes with collars for culverts carrying heavy traffic

Rupees Six Hundred

as per IS 458-1991 specifications including setting the pipes

65 60.00 659.99 Fifty Nine and Ninety Rmt

in C.M. 1:2 watering and laying (to level or slopes) of class

Nine Paisas Only

NP3 of following internal daimeters.(i) 300mm dia.

Constructing manhole with R.C.C. top slab 1:2:4 mix (1:

Cement coarse sand, 4: Graded stone aggregate 20 mm

nominal size, foundation concrete 1:3:6 mix (1: cement, 3:

coarse sand, 6: Brick bats 40+50 mm size) inside plastering

1.5 mm thick with cement moratar 1:5 (1:cement, 5:coarse

Rupees Nineteen

sand) finished with a floating coat of neat cement 1:2:4 (1:

66 3.00 Cement coarse sand, 4: Graded stone aggregate 20 mm 19349.63 Rmt

Hundred Forty Nine and

nominal size) finished smooth complete including curing and

Sixty Three Paisas Only

testing. {i} Inside size 900mm X 1200 mm and 1:5 m deep

including R.C.C. cover with frame size 560 mm {2} “B” Type

Depth 1.50 Meter for 150 mm diameter sewer

Providing erecting and fixing double coated Syntex or

equivalent PVC. (ISI) mark water tank of reqd capacity each Rupees Three and

with all necessary fittings & connection etc. comp on terrace Ninety Five Paisas Only

Preparing structural design of RCC Under Ground / Partially

under ground / above high ground level Reservoir of

required capacity as per relevant I.S.s and constructing the

same, including excavation in all types of soil strata

(including rock) including shoring strutting if required, for

loose soil / to protect from collapse due to near by traffic

load, casting 100 mm thick P.C.C. leveling course in M-10,

Refilling the pit with proper soil and disposing of the surplus Rupees Six and Twenty

stuff within a lead of 50 meters. Including cement plaster in Six Paisas Only

CM 1:2 with approved water proofing compound to inside

water touching surface to container. Including all types of

labour and material charges of lowering, laying, erecting /

hosting and jointing of pipe assembly to inlet, outlet

overflow, washout and bye pass arrangement as per

hydraulic design.

Providing and fixing accessories like MS / GI Ladder, CI

Manhole frame and cover, water level indicator, adequate

cowl type ventilators or lantern type ventilator with stainless

B.B. Masonry chambers for valves. Providing and applying

three coats of cement paint / snowcem to the out side face

of structure. It also includes satisfactory water tightness test

as per relevant I.S. code and painting name of scheme and

capacity on the tank as per direction of engineer in charge.

List of Indian Standards for Design of GSR / SUMP:-

The structural design of GSR shall be in accordance with

provisions relevant I.Ss.

(1) I.S. 3370, Part – 1 to 4, 1965 or latest revised.

(2) I.S. 456 – 2000 or latest revised.

(3) Size shall be fixed as per availability of space (land

area) at site / acceptable engineer in charge.

(4) Effect of overlapping of pressure bulbs on soil due

near by structure and proposed sump should be considered.

(5) Care shall be taken that no damage should occur to

nearby existing structure. Compensation shall be paid for the

same by agency.

(6) The minimum concrete grade for RCC shall be M-30.

(7) HYSD Fe 415 / 500 grade reinforcing bars confirming

to I.S. 1786 / 1139 shall be considered in design. CRS / TMT

bars shall be provided. In saline atmosphere corrosion

resistance stainless steel / HCR rebar shall be provided. Any

other steel can be used with approval of C.E./ in situation of

non availability in market without extra cost.

(8) Minimum size (or thickness) of various components

shall be provided as per tender criteria / specifications in

absence as per I.S./ Std. practice of G.W.S.S.B. Minimum

dimensions specified for various components in tender data

/ specifications shall be provided without fail.

(9) The safe bearing capacity (SBC) shall be referred from

SBC test report. In absence of report it shall be referred from

data sheet. If poor soil is found / water table is met with

during excavation SBC shall be scientifically ascertained and

design shall be revise. No extra shall be paid for increase in

10) CI pipes and special shall only be used if type is not

specified in tender.

(11) The rate shall include cost of dewatering during

excavation making all arrangement when water table meets

(12) The structure shall be designed properly to resist uplift

due to ground water table specified in data or actual ground

water table meets with during excavation. No extra shall be

paid. If GWT / Uplift is mentioned in tender and during

excavation it dose not meet 7.5% rate shall be reduced.

(13) GI pipes railing shall be provided when sump is more

than 2 meter above ground level.

(14) Appearance of structure should be aesthetically good

looking acceptable to authority.

(15) Any charge in size, shape, depth below GL, height

above GL, water depth, F.B., size of member etc can be

permitted in exceptional case due to site condition or

hydraulic design requirement by C.E. No extra shall be paid

(16) Any charge in data, dimensions, shape, water depth,

reduction in size if permitted by competent authority and if

it reduces quantity then payment shall be reduced prorate.

(17) When capacity of GSR / Sump is > 20 lakh liters two or

suitable compartments acceptable to executive engineer

shall be designed and provided.

(18) Agency shall engage qualified (at least graduate)

consulting engineer for designing the structure and he / she

shall visit the site for guidance of work.

(19) 75% part rate shall be payable for concrete,

reinforcement and plastering items of container until

satisfactory hydraulic testing for water tightness is

performed as per tender condition. Till the work shall be

treated as incomplete.

Above conditions / general specifications Sr. No. 1 to 19 are

part and parcel of tender (contact) and prevail over other

provisions in tender.

D. As Above Rectangular Sump with water table (Sub Soil

Water level above Foundation)

20,000 liter capacity

Monoblock pump 3 Phase 400/440 Volt, 50Hz AC supply and

2800 RPM as per IS 9079 with following MOC: Casing CI-Fg

69 1.00 260, Impeller: Bronze & Shaft S.S 410. Discharge 285lpm & 16483.20 Nos

Hundred Eighty Three

and Twenty Paisas Only

DOT Star delta starter suitable for local & remote pump

control applicaion consisting of MPCB, overload relay and Rupees Six Thousand

contractors as per type II cordination ncluding digital Nine Hundred Ninety

voltmeter, analogue ammeter with selector switch, run hour Three and Twenty Four

meter, required protective relay & control accessories. (b) Paisas Only

D.O.L. upto 5 HP

PVC insulated flat submersible cable as per detailed Rupees One Hundred

71 40.00 specification conforming to IS 694, IEC 60227/60228 1R x 3C 180.79 Eighty and Seventy Nine Rmt

x 6 Sq.mm Paisas Only

Point wiring for Light / Bell with 2-1.5 sq.mm & earth wire

of 1.5 sq.mm (Green) both are of ISI marked 1.1 KV grade

FRLS PVC insulated multi strand copper wires up to 10 mtr

length , in below type of pipe erected with 6A Modular type

switch / bell push & accessories and earth continuity of

72 following type, erected on PVC / Metallic/Wooden box,

single mounting base frame covered with

textured/metallic/white front plate modules erected on / in

wall / ceiling as per pipe erected, with necessary Lamp

holder/ceiling rose / H.D.Connector as directed.

(f) with medium class Rigid PVC pipe and accessories erected

Rupees Four Hundred

concealed in wall/ceiling complete, Cat - III

62.00 449.45 Forty Nine and Forty Pt.

Five Paisas Only

Point wiring for FAN with 2-1.5 sq.mm & earth wire of

sq.mm (Green) both are of .ISI marked 1.1 KV Grade FRLS

PVC insulated multi strand copper wires up to 10 mtr length,

in below type of pipe erected with 6A Modular type switch

and hum free EME step type electronic fan regulator

mounted and accessories with earth continuity of following

type erected on PVC / Metallic/Wooden box, single

mounting base frame covered with textured/metallic/white

front plate modules erected on / in wall / ceiling as per pipe

erected. with necessary ceiling rose / H.D.Connector as

(F) with medium class Rigid PVC pipe and accessories Rupees Six Hundred

37.00 erected concealed in wall/ceiling complete, CAT - III 674.68 Seventy Four and Sixty Pt.

Eight Paisas Only

Point wiring for on board Looped Plug with 6A & 16A

Modular type switch & 5 pin socket erected on PVC /

Rupees Two Hundred

Metallic/Wooden box, single mounting base frame covered

74 20.00 257.55 Fifty Seven and Fifty Five Pt.

with textured / metallic/white front plate modules erected

on / in wall / ceiling with following type accessories, CAT-III

Point wiring for Individual Plug with & earth wire of

sq.mm (Green) both are of ISI marked 1.1 KV grade FRLS

PVC insulated multi strand copper wires up to 10 mtr length,

in below type of pipe erected complete with Modular type

switch & 5 pin Plug erected on PVC / Metallic/Wooden box

covered with appropriate front plate modules erected on / in

wall / ceiling as per pipe erected with following type of

(1) For 6A Plug and 6 a switch with 2-1.5 sq.mm Cu. Wire

Rupees Five Hundred

from nearby switchboard/mcb db board, (F) with medium

5.00 510.05 Ten and Five Paisas Pt.

class Rigid PVC pipe and accessories erected concealed in

wall/ceiling complete, CAT - III

Point wiring for Individual Plug with & earth wire of

sq.mm (Green) both are of ISI marked 1.1 KV grade FRLS

PVC insulated multi strand copper wires up to 10 mtr length,

in below type of pipe erected complete with Modular type

switch & 5 pin Plug erected on PVC / Metallic/Wooden box

covered with appropriate front plate modules erected on / in

wall / ceiling as per pipe erected with following type of

(2) For 16A Plug and 16 amp switch with 2-2.5 sq.mm Cu.

Rupees Seven Hundred

Wire from mcb db board. (F) with medium class Rigid PVC

5.00 745.38 Forty Five and Thirty Pt.

pipe and accessories erected concealed in wall/ceiling

Eight Paisas Only

complete, CAT - III

Providing and erecting Sheet Steel powder coated Vertical

MCB distribution board (VTPN) - flush / surface mounted

double door (IP54) fitted with copper insulated busbar,

isolated neutral bar, earth bar and DIN rail, Conforms to IS

8623-1 & 3, IEC 61439-1 & 3, suitable for 63/100 AMP TPN

MCCB + RCCB as incomer and three phase outgoing as per

following .(The DBs should be used of same company of

MCB to be used)

(D)12 way outgoing Rupees Ten Thousand

Nine Hundred Sixty Five

and Fifty Seven Paisas

Providing and erecting Approved make RCCBs conforming

to IS: 12640 and having sensitivity of 30 mA and Short Circuit

withstand capacity of 10 KA and suitable for operation on

phase and neutral 415V,50Hz. having characteristic of quick

action & tripping with all advance feature & do not

incorporate any electronic component for following Max.

rating erected as directed.

(iv) 100 Amps. FP (100 mA Sensitivity)

Rupees Four Thousand

Three Hundred Fourteen

and Seventy Two Paisas

providing and erecting Miniature circuit breaker single pole

6A to 25A suitable to operate on 240 V A.C. system and Rupees One Hundred

79 5.00 having breaking capacity 10 KA to be erected in existing 112.11 Twelve and Eleven Ea.

box. confirming to IS 8828/1996 with ISI Mark - Cat-III Paisas Only

Providing & erecting 240 V MCB double pole switch for

Rupees Two Hundred

lighting Load (B Curve) having 10 KA breaking capacity &

80 1.00 295.93 Ninety Five and Ninety Ea.

confirms to IS : 8828 in existing box having following

Three Paisas Only

capacity- (B) 40 Amp.- Cat-III

Providing and erecting XLPE(IS:7098)(I)-88 ISI armoured

cable multistrand Aluminium conductor for 1.1 KV. to be

81 laid on wall with necessary clamps or in existing trench /

pipe of following size of cables. (C) 3 core 6 Sq. mm

(C) 3 core 6 Sq. mm Rupees One Hundred

90.00 107.06 Seven and Six Paisas Rmt

Supplying and erecting LED indoor fittings with LEDs of

wattage 0.2 Watt to 0.5 Watt assembled on single MCPCB,

with housing used as a heat sink shall be made of thick sheet

Steel conforming to IS: 513/CRCA/aluminium pressure die

cast powder coated and high U.V. & corrosion resistance

with diffuser housed in aluminium casted body with

company mark/name

82 160V to 270V,Power Factor more than 0.95, THD < 15 %,

CCT 3000 K to 6500K,

Luminaire efficacy> 85 lumens/watt

LED driver efficiency > 85 %

( fitting required LM-79 & LM-80 Certificates)(NOTE: Below

description have shown ranges of Wattage capacity of LED

fittings.The Engineer incharge may select any wattage

capacity between the ranges shown.)

(A) Square/ Circular shaped Surface/Recessed Mount

Rupees Seven Hundred

Downlight with provision for spring loaded mounting clips

21.00 758.51 Fifty Eight and Fifty One Ea.

complete.IP20: 22-24 watts, Surge-2 KV (iv) 22-24 watts,

Supply, Installation, Testing and Commissioning of suitable

sweep, BEE 5 Star rated, Ceiling fan with Brush Less Direct

Current (BLDC) permanent ferrite magnet Motor, class of

insulation: B, Rust free 3 nos.Aluminium blades, 2 nos.

canopies, shackle kit with earthing provision, copper

winding, Power factor not < 0.9, Service Value (CMM/W)

minimum 6.85, Air delivery minimum 215 CMM,

83 RPM,230v (tolerance as per IS : 374-2019), THD < 10%, with

remote unit for Speed Control and all remaining accessories

including safety pin, nut bolts, washers, temperature rise =

75 degree C (Max.), suitable for 140 to 285 Voltage and

rectifier circuit with surge, over current and overload

protection , 50 Hz, Single phase AC Supply, earthing etc.

Complete as required.[ Make shall be approved by Engineer

(B) 1200 mm Sweep (48")

Rupees Two Thousand

Eight Hundred Eighty

Five and Fifty Seven

Supplying & erecting approved make low noise decorative

84 exhaust fan having square frame ABS body with inbuilt

lowers & square frame.

200mm with 1350RPM Cat.II

Rupees One Thousand

Seven Hundred Three

and Eighty Seven Paisas

Supplying and erecting LED indoor fittings with LEDs of

wattage 0.2 Watt to 0.5 Watt assembled on single MCPCB,

with housing used as a heat sink shall be made of thick sheet

Steel conforming to IS: 513/CRCA/ aluminium die cast

powder coated and high U.V. & corrosion resistance with

diffuser with company mark/name 160V to 270V, Power

Factor more than 0.95, THD < 15%,

CCT 3000 K to 6500K, Rupees Three Hundred

85 42.00 Luminaire efficacy> 85 lumens/watt ,LED 373.70 Seventy Three and Each

LED driver efficiency > 85 % Seventy Paisas Only

( fitting required LM-79 & LM-80 Certificates)(NOTE: Below

description have shown ranges of Wattage capacity of LED

fittings.The Engineer incharge may select any wattage

capacity between the ranges shown.)

(A) Tube Light with integral driver

(iv) 22-24 Watts, Surge - 2KV,IP-20, conventional 4 feet

Providing and erecting Mains with 1.1 KV grade FRLS PVC

insulated ISI marked stranded Copper conductor wire in

following type of pipe to be erected concealed in /flushed

on wall/ceiling, with 1.5 sq. mm copper conductor FRLS PVC Rupees Sixty Two and

insulated stranded wire of green colour for earth continuity Sixty Two Paisas Only

of following size (A) With medium class Rigid PVC pipe and

accessories (a) 2 wire 1.5 sq. mm

Providing and erecting Street Light pole bracket comprising

main B Class MS pipe of 4.2 cm/require outside dia.

complete with suitable B Class M.S. sleeve tubing of approx.

45cms.length and suitable for 76.5 mm /80mm / required

size of pole top having sufficient fasteners for fixing the Rupees Six Hundred

87 12.00 brackets and having spread of 1.5.mtr. length with 110 626.20 Twenty Six and Twenty Each

deg.with vertical plane & suitable welded stays, reducer and Paisas Only

with check nuts complete painted with one coat of Red

oxide / PU base primer and two coats of Aluminium / PU

paint. paint with following nos of arms. [A] Single Arm

Bracket 1.5 Mtr

Supplying and erecting LED street light / Flood light fittings

with High power White LEDs wattage of 3 Watt and above

assembled on single MCPCB, efficiency more than 130 lm/w

and corrosion free High pressure die cast aluminum housing

with smooth finish powder coated and heat sink extruded

aluminium with diffuser and Polycarbonate optics/ lenses,

with toughened glass with company mark/name engraved

or embossed 160 to 270 V,Power Factor more than 0.95, Rupees Six Thousand

88 12.00 THD < 10 %, CCT 3000 K to 5700K,Uniformity ratio >0.45, 6566.01 Five Hundred Sixty Six Each

Luminaire efficacy> 100 lumens/watt . LED driver efficiency > and One Paisas Only

85 %.( fittings required LM-79 & LM-80 certificates)(NOTE:

Below description have shown ranges of Wattage capacity of

LED fittings.The Engineer incharge may select any wattage

capacity between the ranges shown.) (A) Street Light (IP-65),

Surge protection -4KV integral and ,Light must have 440VAC

line supply with over-voltage protection. (iv) above 90 to

Providing & laying approved make Double walled

corrugated pipes (DWC) of polyethylene (conforming to IS

14930 II ) with necessary connecting accessories of same

Rupees Sixty Two and

89 90.00 material at required depth for laying of cable. below ground 62.62 Mtr

Sixty Two Paisas Only

/ road surface for enclosing cable and back filling the same

to make ground as per original.50 mm DWC Pipe

Providing and erecting XLPE (IS:7098)(I)-88 ISI armoured

cable multistrand / Solid Aluminium conductor for 1.1 KV. to Rupees One Hundred

90 90.00 be laid on wall with necessary clamps or in existing trench / 140.39 Forty and Thirty Nine Mtr

pipe of following size of cables- 4 core 10 Sq. mm Paisas Only

Providing and erecting Pipe type earthing having

Rupees Three Hundred

cms.long and 2.5 cms. dia. galvanised iron pipe with

91 5.00 368.65 Sixty Eight and Sixty Five Each

coupling and buch buried in specially prepared earth pit

complete with necessary 8 SWG earth wire.

Supplying & erecting earth pit of minimum bore dia.150mm

size approved make Earthing Electrode consisting Pipe-in-

Pipe Technology as per IS 3043-1987 made of corrosion free

hot dipped G.I.Pipes having Outer pipe dia of 50mm having

80-200 Micron galvanising, Inner pipe dia of 25 mm having

200-250 Micron galvanising, connection terminal dia of

12mm with constant ohmic value surrounded by highly

conductive compound with high charge dissipation suitable

for following type of applications with chamber and heavy

duty cover. (A)(approved make OEM has to submit test

certificate including value of earth resistance of installation Rupees Four Thousand

duly stamped and signed by agency and officer Incharge has Five Hundred Ninety

92 2.00 to ensure the value of earthing resistane mentioned in test 4591.46 Each

One and Forty Six Paisas

Certificate) & having back filling compound of (B) Inner Only

chemical (CCM Compound)- Resistivity:- 0.2 ohm / meter

testing as per IEC 62561-2017, Voltage drop:- < 1 volt at no

load & dry form, Sulphar content:- <2%(C) Back fill

Compound :- Earthing compound should be capable and

mock shall not be payable if rejected. Make VYARA or

Equivalentmitted by Agency. (a) For Electrical Installation up

to 440V in normal soil

Length of pipe - 1 Mtr

Back filling compound - 1 Nos Bag of 15 Kg.

Box cutting the road surface to proper slope and camber for

Rupees One Hundred

making a base for road work including removing the

93 128.98 109.41 Nine and Forty One Cum

excavated stuff and depositing on the road side slope as

directed upto 50Mt.lead.

Precast Cement Concrete Paver Block - 60mm thick, M-30

Grade Providing and laying factory-made chamfered edge

shot blasted/sand blasted finished, non-interlocking type,

square/ rectangle shape paver blocks of approved make, any

sizes, any shade, any pattern, any color having 80 mm

thickness and minimum M-30 grade, machine made, factory

finished for footpath, parking areas, service lanes and other

similar areas as mentioned in the drawing Including

providing and laying 50 to 80 mm thick average bedding

layer of coarse sand below paver block as per required Rupees Nine Hundred

94 406.20 grading and specification. The laid paver block shall be 944.61 Forty Four and Sixty One Sqm

mechanically compacted. The work of the paving blocks shall Paisas Only

be executed in line and level. The paver block shall be cut by

mechanical means only, if required. Paver blocks shall be

compacted and shall be re-laid if necessary. The actual laid

area shall be measured for payment without any wastage.

The Sample and mock-up shall be approved before

execution. damaged block shall not be used in laying.

Sample and mock shall not be payable if rejected. Make

VYARA or Equivalent

Providing and fixing pre-cast concrete kerb stone of gray

cement based concrete block 30cm length,30cm height and

Rupees Three Hundred

15cm thick of M250 grade concret as per approved design

95 75.00 374.92 Seventy Four and Ninety Rmt

and including excavation for fixing in proper line and

Two Paisas Only

level,filling the joint with C:M 1:3 (1cement:3fine sand) etc

Earthwork for embankment including breaking clods,

dressing with all lead and lift and including watering rolling

Rupees One Hundred

and consolidation of subgrade in layers at O.M.C. to required

96 1440.00 177.91 Seventy Seven and Cum

dry density including filling the depression which occur

Ninety One Paisas Only

during the process using power roller 8T to 10T.(E) From

Borrow area within 3.0KM. lead

Providing, Laying, spreading and compacting graded stone

aggregates 150 mm compacted thick wet mix macadam

[using B.T. M.C. aggregates - 22.4 to 53 mm (30%), 11.2 to

22.4 mm (20%), 2.36 to 11.2 mm (27.5%), Stone dust below

2.36 mm size (22.5%) - 1.32 times loose volume / Cmt. of Rupees One Thousand

compacted volume], as per M.O.R.T. & H. specification Two Hundred Fifty Five

including premixing the material with water at OMC in and Sixty Three Paisas

mechanical mix plant, carriage of mixed material by tippers Only

to site, laying in uniform layers with paver / mortar grader in

sub base / base course on well prepared surface and

compacting with vibratory roller to achieve the desired

Providing and laying in position cement concrete 1:1.5:3 (M-

200) (1- Cement, 1.5-course sand, 3-graded aggregate) and

curing complete excluding the cost of reinforcement for

R.C.C work in Road by Trimix method by providing and

Fixing 'C' channels of 150mm x 150mm as per required level

slope and thickness of concrete road levalling of placed Rupees Five Thousand

concete with surface vibrator finishing the surface with One Hundred Eighty

power floater and trowel ligh brooming on the surface Three and Thirty Two

including providing and filling expansion joint having size Paisas Only

20mm x 20mm as per manufactures spacification and

making construction joint 3mm x 20mm by using concrete

cutter machine along with chemical surface hardner

2.00kg/smt as per direction of the engineer-in-charge. etc.

Carting of debris, ruff kota ston, earth or any wastage

material on site including loading, unloading within anand Rupees Seventy Six and

nagarpalica area as directed by engineer - in- charge. (a) Sixty Four Paisas Only

Total Amount Without GST

Total Amount Without GST

I/We am/ are willing to carry out the work @ _____________ % Above /Below ____________ Percentage (Should be written in Figures and Words) of the

Estimated rates mentioned above amount of my/ our Tender work out as under.

Estimated Amount Estimated Amount

Tender Rs. 1,39,43,900.00 Tender Rs.

Add % Rs. Add % Rs.

Total Rs. Total Rs.

(In Words (In Words

The Contractor shall exhibit a board with detailed specification and details of work as directed by the Engineer-In-Charge for which no extra

payment shall be made

2 The labour cess will be deducted as per prevailing rules i.e. 1% of the work done.

3 GST and Income tax TDS will be deducted at a source while making payments of bills

In all R.C.C. Items in Rate Analysis Standard Cement Consumption has been taken as per Govt. G.R.: PRC-10/2017 Cement

4 Consumption/16/C Date:11/05/2017 as stated in S.O.R. therefore in R.C.C. items where there is a change as per actual mix design the cost of

difference of cement consumption have been deducted from the rate of original item at the rate of input rate mentioned in all the tender.

Stamp with signature of contractor City Engineer

Karamsad Anand Municipal Corporation