REPAIR AND MAINT OF CERTAIN BLDGS OF THIMAIYA BN, MAG, ARMOURIES BLDGS UNDER AGE B/R-I AT IMA DEHRADUN

Amount

Taking down chowkhats or frame with shutters (without taking off shutters from the frames) area exc 1.5 Sqm but n.exc 4.0 Sqm each complete all as specified & directed.

Taking down chowkhats or frame with shutters (without taking off shutters from the frames) area n.exc 1.50 Sqm each complete all as specified & directed.

Taking down shutters of any description exc 1 Sqm and n.exc 2 Sqm each complete all as specified & directed

Taking down shutter of any description n.exc 1 sqm each complete all as specified & directed.

S&F Pressed steel frame of 105x60 mm as per IS section for doors with one or more rebates including necessary fixing lugs, hinges, lock strikes plates etc including PCC 1:3:6 type C-0 (using 12.5mm graded crushed stone aggregate) as in back filling complete all as directed.

S&F Pressed steel frame of 165 x 60mm conforming to relevant IS section for doors with one or more rebates including necessary fixing lugs, hinges, lock strikes plates etc including PCC 1:3:6 type C-0 (using 12.5mm graded crushed stone aggregate) as in back filling complete all as directed.

S&F 2nd class Hard wood in plain, solid, straight chowkats and frames wrought framed, rebated on the solid, rounded or chamfered put together with glue pinned joints complete all as specified.

S&F factory made 30 mm thick flush shutter, solid core construction, with block board core and ply wood face panel commercial type on both side as approved complete all as specified & directed.

S&F 35mm thick 2nd class H.W. plain framed panelled shutters (any number of panels) with lock rail and panel of 9 mm B.W.P commercial ply or 12 mm veneered particle board with commercial veneering on both face, size of rails and stiles as per IS 1003 (part-I) kiln seasoned and chemical pressure treated complete all as specified and directed

S&F 35mm thick 2nd class H.W. glazed and skeleton shutter, open rebated and prepared to receive glass, gauge etc(with sash bars) divided into squars, with plain chamfered or rounded, mitred and rebated sash bars, any numbers fitted with cut and mitered beads for securing glass/gauze etc, sizes of members of shutters as specified in SSR part I section 8 clause 8.24 (a) complete all as specified and directed

S& F Factory made 24 mm thick single extruded WPC (Wood Polymer Composite) solid Moulded Flush Door Shutter Spray Painted with solvent based colour of required size with 2.4 or 6 rised panel design on front side with 10mm deep mould on single side with grain texture of comprising of virgin polymer of K value 57-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 2000 N (Face) & 1100 N (Edge), minimum compressive strength 50 N/mm2 , modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer-In-Charge. (Note: stainless steel butt hinges and necessary S S screws shall be paid separately

S& F Factory made single extruded WPC (Wood Polymer Composite) decorative typesolid door/ window& other frames/ chowkhats of size50 x 75mm comprising of virginPVC polymer of K value 58-60(Suspension Grade), calcium carbonate and natural fibres (wood powder/ rice husk/ wheathusk) and non toxic additives (maximum toxicity index of 12 for 100gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headedSS screwshaving minimum frame density of 750 kg/cun, screwwithdrawn strength of 2200N (face)&1100N (edge), minimum compressive strength 58 N/mm2 , modulus of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant 152 Section 8 and fixed in position with and including MS hold fasts/ lugs/ SS dash fasteners of required dia and length complete all as per direction of Engineer-In-Charge.

S&F Galvanised mild steel wire cloth, 0.56mm nominal dia of wire and average width of aperture 1.18 mm fixed with tinned tacks, galvanized wire of staples complete all as specified & directed

S&F Powder coated aluminium anodised door with frame and shutter and glazing 5mm thick glass and 12mm thick prelaminted particle board exterior grade in bottom panel (kit ply, novapan) glass fixed with rubber gasket with aluminium galzing clips, section of aluminium door shall be of following size :- Frame ; 100 x 44 x 1.98 mm glass thickness with rawal plug. Middle lock rail ; 150 x 44 x 1.98mm thick, Bottom rail ; 150 x 44 x 1.98mm thick, Top rail/Style : 85 x 44 x 1.98mm thick, Glazing beading : 0.70 mm thick , Aluminium handle `D' type 150mm, Aluminium tower bolt 9.9mm dia shoot 200mm long, Mortice lock - 100 mm 4 lever, aluminium stooper cleat - 02 Nos including taking down existing doors etc and making good of wall complete all as specified and directed.

S&F Butt hinges, 100mm long, medium weight, cold rolled, mild steel complete all as directed

S&F Butt hinges, 75mm long, medium weight, cold rolled, mild steel complete all as directed

S&F 150mm long aluminium anodized handle cast complete all as directed.

S&F 100mm long aluminium anodized handle cast complete all as directed.

S&F 200mm long aluminium anodized barrel tower bolt of extruded section complete all as directed.

S&F 100mm long aluminium anodized barrel tower bolt of extruded section complete all as directed.

S&F 250mm long aluminium anosized sliding door bolt with hasp staple (bolt type) and fixing clips to sheet cast or extruded section of cast aluminium complete all as directed.

S&F Floor door stoppers of aluminium alloy body and tongue, anodised, with hard drawn steel spring fixed in repair in door, overall length of cover plate 150mm complete all as specified and directed

S&F in repair Stainless steel conduit pipe 15mm dia, medium weight including a pair of end bracket for cupboard.

S&F in repair Chromium plated brass wall hanger of 6 peg set and fixed with screw complete all as directed.

M&L for PCC 1:2:4 type B-0 (using 12.5 mm graded crushed aggregate )as in sub base flooring 25 mm thick surface finished even and smooth without using extra cement to receive the topping layer complete all as specified and directed.

M&L for PCC 1:4:8 type D-2, (using 40 mm graded crushed stone agg) as in foundation, filling, mass concrete and sub base of floor including demolition of existing old concrete complete all as specified and directed

M&L for PCC 1: 3 : 6 type C-1 , using 20 mm graded crushed aggregates in surface channels and drains including necessary use & waste of formwork and demolition of existing old cement concrete of any description and rubbish off the premises, complete all as specified and directed.

Extra for forming fair finished drain or channel upto 30 cm inner girth in cement concrete, using extra cement, including forms, moulds, mi- tred/stopped ends etc complete all as specified and directed.

M&L for Vitrified ceramic tiles light shade 10 mm thick (square/rectangular) polished, area of each tiles not exceeding 0.36 sqm, laid in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles with and including 15 mm thick screed bed or bedding layer in CM 1:6 complete and dismantling of existing floor tiling including cement mortar bedding (but not backing) and rubbish off the premises complete all as directed.

M&L for Repairs to door and window jambs in patches not exc 1.0 sqm each patch glazed ceremaic coloured tiles 6to7mm thick for matching shade to existing walls,as in vertical surfaces such as dado,skirting etc set and jointed in neat cement slurry and pointed in coloured cement to match with and including necessary rendering in cement mortar 1:4 finished including dismantling of existing damaged wall tiling duly cutting in proper shape,cleaning surface and rubbish off the premises complete all as directed

M&L for Machine cut kota stone slab flooring mirror finished 20-25 mm thick (each slab not less than 0.25 Sqm) over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab with 20 mm thick screed bed or bedding layer in cement mortar 1:4, including rubbing and polishing complete all as specified and directed.

M&L for Machine cut kota stone in riser of steps, skirting, dado and pillar mirror finished 20-25 mm thick over cement base rendering laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab with 15 mm thick screed bed or bedding layer in cement mortar 1:4, including rubbing and polishing complete all as specified and directed.

M&L for Cutting and grinding of existing Granite/kota stone floor surface(2cut) on horizontal and vertical surface and finally finishing the surfaces uniformally by applying floor polish complete all as specified and directed by Engr-i-Charge.

M&L for double action floor spring hydraulically regulated made up of min 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty and fixed in repair in aluminium doors complete all as specified & directed.

M&L for PCC 1:2:4 type B1 (using 20 mm graded crushed stone aggregate) as in lintels upto 1.5m clear span, cills, steps, seismic and other similar bands, coping, benching, kneelers, apex stone, bed plates, kerbs, etc. including weathering, slightly rounded or chamfered angles and throating, including necessary from work etc including demolition of existing cement concrete complete all as directed.

M&L for 75 mm thick PCC 1;3:6 type C-2 using 40mm graded stone aggregate as in plinth protection or similar places and finishing the surface even & smooth with out using extra cement uisng 38mm width PVC dividing strip,3 mm thick including demolition of existing old cement concrete, complete all as specified and directed. Note :- PVC plastic strip shall be measured and paid separately

Supply only 38mm thick PVC dividing strip of 3mm thick

M&L for Granite stone of any colour (of any type) 20mm thick machine cut (table rubbed & polished), as in floors, cooking platforms and like bedded with and including 20 mm thick screed bed in CM (1:6) and jointed with grey cement slurry, and pointed with white with admixture of pigment to match with shade of granite stone including dismantling of existing stone slabs including cement mortar bedding (but not backing) and rubbish off the premises complete all as directed.

M&L for Marble work 18-20mm thick of any colour (of any type) work (table rubbed & polished) in cup board shelves and like with & including 20 mm thick screed bed in CM (1:6) and jointed with grey cement slurry pointing with white cement (1:2) using marble dust with admixture of pigment to match with shade marble including dismantling of existing stone slabs including cement mortar bedding (but not backing) and rubbish off the premises complete all as directed.

M&L for Repairs to door and window jambs in patches not exc 1.0 sqm each patch glazed ceremaic coloured tiles 6to7mm thick for matching shade to existing walls,as in vertical surfaces such as dado,skirting etc set and jointed in neat cement slurry and pointed in coloured cement to match with and including necessary rendering in cement mortar 1:4 finished including dismantling of existing damaged wall tiling duly cutting in proper shape,cleaning surface and rubbish off the premises complete all as directed

M&L, for Non skid ceramic coloured tiles 7 to 8mm thick (Square or rectangular) area of each tile exceeding 0.11 Sqm but not exceeding 0.18 Sqm, laid in floors etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles with and including laying of 15 mm thick screed bed or bedding layer in cement mortar 1:6, complete including dismantling of existing floor tiling including cement mortar bedding (but not backing) and rubbish off the premises complete all as directed.

Repairs to existing cupboard of any type to make smooth functional including inspection drawer repair by straightening the edges and sides to achieve desired shape,fixing of stainless steel telescopic channel of any description and refixing the drawers in original position complete all as specified and directed. Note:- Stainless steel channel of required size will be measured and paid separately

S & F stain less steel telesopic channel of best quality fixed to drawer including necessary repair if any complete all as directed.

S&F Stainless steel curtain rod 20mm dia of SS conduit pipe grade -304 , complete. Including taking down of existing rod, complete all as specified and directed.

S&F Stainless steel decorative finials and end wall bracket of approved quality for 20mm dia curtain rod , complete. Including taking down of existing finals or end brackets, complete all as specified and directed.

S&F, Stainless steel heady duty brackets of approved quality for 20mm dia curtain rod , complete. Including taking down of existing brackets, complete all as specified and directed.

S&F, Factory made Cupboard of 18-20mm thick with coloured prelaminated WPC board consisting of one drawer,two shoe racks with stainless steel louvers of 100X100mm size on both shutters, three shelves and one drawer withlocks and a pair of stainless steel chanel 450mm, handles, 20mm dia heav duty SS cloth hanging rod including end brackets, fixing with 100mm long fasteners (12 Nos Minimum), one looking mirror 5mm thick of size 400mm X 1100mm fixed on surace of singlre leaf shutter of cupboard with WPC beading & PVC angle / edge bend tap of suitable size & matching colour, make good the existing surfaces with cement mortar (1:4) to get the size of cubical portion for cupboard of specified size etc all complete as per specifications and drawing No. GE IMA/ 156/ 2022, Sheet No. 1/1, Back side of cupboard shall be provided with 12mm thick WPC board. Make:- Rajshree Plastiwood or equivalent in Floresta of TVL Engineers Pvt. Ltd. or Navratan or Archid Ply. As approved by GE. Note :- (1). Over all size of cup board Width- 1.75mtr , Height- 1.93Mtr, Depth- 0.60Mtr and these dimensions may vary 50mm Plus or Minus as per site requirement due existing constructional aspects. (2). All sizes of shelves, drawers, shoe racks etc may varry as per site requirement except a maximum variation of 50mm in over all size only. (3) Stainless steel Chanel for drawer shall be of capacity to sustain 25 Kg weight. Make :- Hettich or as approved by GE. (4). All fittings like Handles of diffirent sizes , Piano hinged 36mm wide on opening, heavy duty 22mm dia hanger rod with brackets shall beof stainless steel. (5). Any missing specifications or dimensions shall be as per site requirement and as per final direction of Engr-in-Charge will be applicable including Taking down existing unserviceable wooden/steel cupboard including shelves,drawer and fittings, area not exceeding 4 Sqm each and removal from site, all complete as directed.

Dismantling carefully and taken out cracked/ broken marble/kota slabs in steps, floors not exc. 0.50 sqm ecah patch including material & lobour for prepolished marble slab 20-25mm thick of any colour (of any type) matching with existing colour of marble/kota slab including 15mm thick screed bed in CM (1:4) and jointed with grey cement slurry pointing with white cement (1:2) using marble dust with admixture of pigment to match with shade marble, including moulding / rounding of exposed edge of slab, complete all as directed.

S&F Two way chromium plated angle cock 15mm dia with wall flange fixed in repair complete all as directed

S&F Chromium plated Angle valve 15mm dia (angle cock) cast fixed in repair complete all as directed.

S&F 15mm dia chromium plated concealed stop cock, heavy body screwed both ends for iron or for union fixed in repair complete all as directed

S&F Two way chromium plated bib cock 15mm dia with wall flange fixed in repair complete all as directed Make: Cera Victor Series,Hindware or Prayag

S&F Chromium plated brass hot & cold basin mixer with centre hole for WHB and long shank fancy type 15mm bore fixed in repair complete all as directed.

S&F Chromium plated Wall Mixer with Bend Pipe for connection to Overhead Shower (with Bush & Piston Diverter Fitting) with Aerator, connecting legs & wall flange etc 15mm bore fixed in repair complete all as directed.

S&F 15mm bore long body bib tap with wall flange fixed in repair complete all as directed.

S&F 15mm bore short body bib tap chromium plated with wall flange and aerator fixed in repair complete all as specified and directed.

S&F Overhead shower round shape 100mm dia single flow (ABS body chrome plated with grey face plate) with revolving joints (with body rotation) & 115 mm long shower arm fixed in repair complete all as directed.

S&F in repair, CP Health Faucet with 1 M. long flexible tube chrome braided with wall hook

S&F, Chromium plated towel rail 600mm size fixed in repair complete all as directed.

S&F in repairs viterious china squatting pan orissa pattern size 580x440mm white integal foot rest & including 10 lit cap flushing cistern PVC low level & flush pipe including concrete bedding & including P trap 100mm complete

S&F PVC low level flushing cistern 10 Ltr capacity symphonic action type white including ball valve, float valve and handle including bracket and PVC flush pipe fixed in repair complete all as directed.

S&F in repair vitreous china wash down water closet pan (padestal pattern), white including plastic water closet seat cover, white, closed pattern flat bottom and mild steel chromium plated or aluminised hinging device.

S&F PVC connections 15mm size with PTMT length 450mm

S&F PVC connections 15mm size with PTMT length 600mm

S&F in repair plastic water closet seat cover, white, closed pattern flat bottom and mild steel chromium plated or aluminised hinging device.

Cutting marble platform for inserting/fixing oval type WHB under marble platform including grinding, polishing and taking down and refixing the WHB complete all as directed.

S&F Vitreous china WHB Star white oval type counter top WHB 63 x 50 cm fixed in repair complete all as directed.

S&F, Chromium Plated steel soap dish fixed in repair complete all as directed

S&F, Chromium Plated steel toilet paper holder fixed in repair complete all as directed.

S&F, in repair, 15 mm dia CP Brass leg any angle suitable for wall mixer including taking down old and refixing new on existing mixture complete all as directed.

S&F 100mm dia chromium plated grating with/without hole fixed in repair complete all as directed.

S&F, in repair, Chromium plated waste coupling with fly nuts 32mm dia suitable for wash hand basin complete all as directed

S&F, in repair, Brass spindle of any type for existing bib cock, wall mixture, WHB mixture fixed in repair complete all as directed.

S&F Chromium plated brass knob(as per site requirement) for wash hand basin, wall mixture, bib cock and angle cock as per site requirement with nut & washer as approved fixed in repair complete all as directed.

M&L for 40mm thick PCC 1:2:4, type B1 (20mm graded crushed stone aggregate) as in floors and finishing the concrete even and smooth using extra cement including demolition of existing old cement concrete floors etc complete all as directed.

S&F Ball valve 20mm dia high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball min weight 210 gms fixed in repair complete all as directed. Make: Prayag

S&F Ball valve 25mm dia high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball min weight 455 gms fixed in repair complete all as directed. Make: Prayag

S&F 20mm bore gun metal globe/gate valves, with iron wheel head, screwed both ends for iron/GI pipe fixed in repair complete all as directed. Make: Zoloto/Leader/Kirloskar/Upadhyay/Audco

S&F 25mm bore gun metal globe/gate valves, with iron wheel head, screwed both ends for iron/GI pipe fixed in repair complete all as directed. Make: Zoloto/Leader/Kirloskar/Upadhyay/Audco

S&F 50mm bore gun metal globe/gate valves, with iron wheel head, screwed both ends for iron/GI pipe fixed in repair complete all as directed. Make: Zoloto/Leader/Kirloskar/Upadhyay/Audco

S&F for 75mm bore Cast iron soil, waste and vent pipes in any length with or without ears, with cement joints, laid in trenches or in floors, including dismantling of existing cast iron or reinforced concrete drain pipes, complete all as specified and directed

S&F, in repair, for Cast iron 75mm diameter of outlet floor trap, with grating including jointing to waste pipe fixed in cement concrete 1:2:4 type B-1(using 20mm graded crushed stone aggregate) complete all as specified and directed

S&F, in repair, for cast iron fittings as bends, Tee, branch piece etc (any radius) 75mm pipe, diminishing pieces of tapers (large bore measured), fixed to wall or floors, complete all as specified and directed.

M&L, For repairs to existing floo traps in toilets, filling all around the floor trap with cement mortar 1:2 including replacement of adjecent tites and CP grating of floor trap including taking down existing tile etc all complete as specified and as directed.

S&F Stack clamps made out of 25mm X 5 mm flat iron and 16mm dia round iron stays, for fixing 100 mm bore pipe including bolts and nuts and securing ends of stays to wall or roof complete all as specified and directed

S&F in repairs for 5mm thick sandwitched PVC wall lining/panelling of any colour PVC sheet inclusive of PVC beads and angles at corners /edges and fixing at site with nails all as specified and directed.Make:- Reyan/Glove/ Height.

Hacking out old broken glass pane of any thickness and size from aluminium doors and glazing pins etc and fixing of 5.0 mm thick glass fixed in aluminium door/window/partition fixed with rubber gasket and aluminium beading complete all as directed

S&F 3mm thick sheet glass ordinary quality type & glazing with wooden beads in squares not exc 0.5 Sqm in each pan, including hacking out old broken glass pane of any thickness and size from wooden/metal frame including punching or drilling and glazing pins etc complete all as directed

S&F 12mm thick toughened glass frameless doors including cutting, polishing and bevelling all around and making holes for fixing of handles including removing old broken glass doors complete all as directed

S&F 300 mm long stainless steel handle fixed to glass door all as specified & directed.

S&F Pivot for glazed aluminium door as per sample including taking down existing glazed aluminium door shutter/frame less glass door shutter n. exc 4.00 Sqm and refixing in the same position after fixing of pivot and all other repair complete all as specified and directed.

S&F Aluminium body door closer hydraulically regulated designation no 3 universal type, suitable for door shutters of 851 to 1000mm in width and of weight between 61 to 80Kg fixed in repair complete all as directed.

M&L for double action floor spring hydraulically regulated made up of min 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty and fixed in repair complete all as specified & directed.

S&F 18mm thick prelaminated colour WPC Board having base brown, minimum density of 600 kg/cum, for Bath cabinet Shutter/ drawer Front, cup board shutters, frame etc complete all as specified and directed.

S&F for 18mm thick WPC Board having base brown, minimum density of 600 kg/cum, for bath cabinet Shutter/ drawer Front, cup board shutters, frame etc complete all as specified and directed.

S&F, Continuous (Piano) hinges, mild steel, bright finished or electro galvanised, width of flap 30mm (when open), complete all as directed

S&F Magnetic catcher suitable for cup board shutter fixed with scews in bath cabinet or similar situations, complete all as specified and directed. Make:- Hexa,Hettich,Hafele

S&F in repair 4 lever mild steel lock with handle & plate suitable for existing steel cup board complete all as specified & directed.Mkae- Godrej,Link and equivalent

S&F in repair stainless steel bow handle 75mm size with machine screw fixed in cup boards drawers etc all as directed.

M&L for Steel ventilator with top hung shutter including hinges, steel peg stay, complete all as specified & directed

M&L for Steel window factory made with side hung shutter including projecting type hinges with steel handle and steel peg stay complete with glazing bars dovetailed or welded complete all as specified and directed.

M&L for Steel window factory made with side hung shutter including projecting type hinges with steel handle and steel peg stay complete without glazing bars dovetailed or welded complete all as specified and directed.

Taking down cement plaster on brick or stone walling built in CM including raking out joints hacking for key scrubbing down with water etc complete as specified

M&L for Rendering 12 mm thick on brick or concrete surface using Ready mix mortar mixing with WPC all as per manufacturers instructions, surfaces finish even and smooth without using extra cement complete all as specified and directed including Taking down cement plaster on brick or stone walling built in CM including raking out joints hacking for key scrubbing down with water etc complete as specified ( Note :- WPC shall be paid separately)

M&L for Rendering 5 mm thick using Ready mix mortar on ceiling or concrete surface finish even and smooth without using extra cement complete all as specified and directed

M&L Brick work with sub class 'B' bricks (old size) straight or curved on plan exc 6.00m mean radius built in CM (1:6) including demolition of brick work/stone masonry built in cement mortar complete all as specified and directed.

M&L Brick work with sub class 'B' bricks (old size), straight or curved on plan to any radius in half brick thick wall built in CM (1:4) including demolition of brick work/stone masonry built in cement mortar complete all as specified and directed.

Supply only liquid water proofing compound complete all as specified & directed.

M&L for providing precast cement concrete louvres and jallies 35 mm thick (measured solid) including all mouldings but excluding frame in cement concrete 1:2:4 type B0 using 12.5 mm graded stone aggregates and set in cement mortar 1:4 complete all as specified and directed. ( Note - Work to be carried out upto Triple storey Building & Rates are inclusive of Scaffolding)

M&L, for Factory made Precast heavy duty RCC drain cover 80mm thick with using 10mm dia reinforcement TMT bar including 1.00mm thick MS black sheet frame on edges with two coats of antecorresive paint over primer all complete, as specified and directed.

S&F, Stainless steel sheet 0.50 mm thick, gde 304, in required width or girth, bent to shape for protection of membrane, fixed in staggered counter holes with SS screws and rubber/ bitumen and steel double washers all as per directions of Engr-in Charge, complete all as specified and directed.

S&F, in repair, 500 ltr capacity Rotational moulded polythylene water storage tanks three layered, ISI Marked (cylindrical vertical with closed top) hoisted and fixed in position complete all as specified in SSR Part I including dismantling/ taking out of old water tank & removing to where directed complete all as specified and as directed.

S&F, in repair, 1000 ltr capacity Rotational moulded polythylene water storage tanks three layered, ISI Marked (cylindrical vertical with closed top) hoisted and fixed in position complete all as specified in SSR Part I including dismantling/ taking out of old water tank & removing to where directed complete all as specified and as directed.

S&F, in repair, 2000 ltr capacity Rotational moulded polythylene water storage tanks three layered, ISI Marked (cylindrical vertical with closed top) hoisted and fixed in position complete all as specified in SSR Part I including dismantling/ taking out of old water tank & removing to where directed complete all as specified and as directed.

S&F, in repair, PVC lid for PVC water tank with hinging device and locking arrangement for capacity upto 2000 ltr with necessary nuts, bolts and washer etc fixed in repair complete all as directed.

Complete removal of existing treatment on wall/ceiling/ roof projections including facia, cornices etc by scrapping with mechanical sander (having mechanical vaccum mechanism) with sanding pad of appropriate grit to make surface clean,free from dust, loose paint etc by skilled labour complete all as specified and directed.

M&L, Preparation of newly plastered or scrapped surfaces of wall/ ceiling by making free from dampness, oil or any loosely held particles, filling cracks if any with crack seal and applying a coat of Dampstop Advanced of Berger or equivalenet of Sika/ Asian Paint/ Fosroc on saturated dry surface of wall as per manufacturer instruction complete all as specified and directed.

M&L for Preparation of water proofing coated surface or scrapped surfaces of wall / ceiling and applying 1.5mm thick Asian acrylic damp proof wall care putty as per manufacturer instruction complete all as specified and directed.

M&L for Preparation of puttyied / plastered surfaces of wall/ceilng and applying two coats of oil emulsion distemper over one coat of primer, complete all as specified and directed.

M&L for preparation of old plastered/un-plastered surfaces of wall by brooming down or steel wire brushing; scrapping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots including cornices, pillar etc and applying one coat of white wash on walls complete all as specified and directed.

M&L for preparation of old plastered/un-plastered surfaces of ceiling by brooming down or steel wire brushing; scrapping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots including cornices etc and applying one coat of white wash on ceiling complete all as specified and directed.

M&L for Preparation of old plastered/unplastered surfaces of wall and applying one coat of weather exterior emulsion paint (Apex paint of Asian Paint / Weather proof of berger) complete all as directed. Note : The work shall be carried out upto 18m height. The rates are inclusive of scaffolding. Note:- The painting work is to be carried out by mechanical means after covering the adjoing areas/window/floor by using paper/plastic and mask tape.

M&L for Preparation of old plastered surfaces of walls by brooming down or steel wire brushing; scrapping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots and applying one coat of oil emulsion distemper on walls complete all as specified and directed

M&L for preparation of new plastered surfaces of wall and applying two coats of weather proof exterior emulsion paint (Apex of Asian/Weather proof of Berger) all as directed. Note:- The painting work is to be carried out by mechanical means after covering the adjoing areas/window/floor by using paper/plastic and mask tape.

M&L for Preparation of old painted steel surfaces of any description, over 10 cm in width or girth and applying one coat of synthetic enamel paint with approved shade complete all as specified and directed

M&L for preparation of old painted wooden surface of wood and wood based material over 10cm in width or girth of any description and applying one coat of synthetic enamel paint all as specified and directed.

M&L Preparation of new wooden surface exceeding 10cm width or girth and applying two coat of synthetic enamel paint over one coat of pink primer complete.

M&L preparation of existing varnished wooden surfaces of any description over 10cm width or girth and applying one coat of synthetic clear varnish complete all as specified.

Sanjay Enterprises (BID ID -3302084)

ACE BUILDERS AND CONTRACTORS (BID ID -3302277)

sath sahib associates (BID ID -3302296)

ADEPT INFRA SOLUTIONS (BID ID -3301954)

M/S PUNDIR BUILDERS (BID ID -3302186)

Amit Traders (BID ID -3301339)

KRISHANA ELECTRIC WORKS (BID ID -3300662)

Meher enterprises (BID ID -3302175)

M/S RAJESH KUMAR GOYAL (BID ID -3301893)