Erection & labour work of supply, laying, testing & commissioning of 11/22 kv underground XLPE cable (XLPE cable will be supplied by DGVCL) with cable end termination & straight through jointing kit (to be supplied by contractor) on ARC basis under all scheme under PIPLOD sub division under Piplod Division as well as all Sub-division in jurisdiction under Piplod Division or within the jurisdiction of Surat City Circle.

Sub:-Erection & labour work of supply, laying, testing & commissioning of 11/22 kv underground XLPE cable (XLPE cable will be supplied by DGVCL) with

cable end termination & straight through jointing kit (to be supplied by contractor) on ARC basis under all scheme under CFC under Piplod Division as

well as in jurisdiction of Piplod sub division under Piplod Division or within the jurisdiction all sub Division of Piplod Division and Surat City Circle.

Item Code DETAILS OF WORKS Qty Unit Rate Amount

1 9925000001 Labour charge for excavation of cable trench of 400mm Meter

width x 1200mm depth, in any type of soil for laying of

cable of size up to 240 mm2 (For additional cable 200 mm

additional width shall be considered i.e. half trench

length is to be considered)

2 9925000002 Labour charge for excavation of cable trench of 600mm Meter

width x 1200mm depth, in any type of soil for laying of

cable of size up to 240 mm2 (For additional cable 200 mm

additional width shall be considered i.e. half trench

length is to be considered)

3 9925000003 Labour charge for excavation of cable trench of 400mm Meter

width x 1500mm depth, in any type of soil for laying of

cable of size up to 240 mm2 (For additional cable 200 mm

additional width shall be considered i.e. half trench

length is to be considered)

4 9925000004 Labour charge for laying of 11kV / 22 kV XLPE Cable of Meter

size up to 240 mm2 & preparation of sand layer 100mm

thick, in the cable trench & covering the cable with

mm dia (Inner), thickness 25 mm, 1.0 meter long RCC

half round muffs and providing and fixing of 4inch width

yellow colour polyethylene tape with printing "CAUTION

ELECTRIC CABLE BELOW" at 0.75 m depth from ground

surface after laying cable in trench. This will provide

indication that electric cable is passing underground so as

to protect cable from mechnical injuries, refilling the

same, as per Instruction of Engineer in Charge (EIC).

5 9925000005 Labour charge for horizontal drilling using Auger machine Meter

without damage to surface road at max 2.0 mtrs depth &

putting of 6.11 kg/cm2 , class-4,Green color, 110mm O.D.

, 8.5mm thickness H.D.P.E. pipe confirms to IS 4984-

1987(3rd revision) and BIS certification and laying of

11KV/22KV XLPE cable of size up to 300 mm2 in HDPE

pipe, as per Site Condition (excluding cost of pipe). The

detail map obtained from HDD machine and excell

sheet(hard and soft copy) indicating the respective depth

and distance from adjacent landmark for each segment

for HDD is must required to be submitted. HDD to be

carried out at depth 1.5 mtrs to 2.0 mtrs as per site

conditions and as per instruction of EIC.

6 9925000006 Labour charge for horizontal drilling manually without Meter

damage to surface road at max 2.0 mtrs depth & putting

of 6.11 kg/cm2 , class-4,Green color, 110mm O.D., 8.5mm

thickness H.D.P.E. pipe confirms to IS 4984-1987(3rd

revision) and BIS certification and laying of 11KV/22KV

XLPE cable of size up to 300 mm2 size, as per Site

Condition (excluding cost of pipe). The detail map and

excell sheet(hard and soft copy) indicating the respective

depth and distance from adjacent landmark for each

segment of cable to be submitted. Drilling to be carried

out at depth Minimum 1.2 mtrs to 2.0 mtrs as per site

conditions as per instruction of EIC.

7 9925000007 Supply of 6.11kg/cm2, class-4,Green color, 110mm O.D., Meter

8.5 mm thickness H.D.P.E. pipe confirms to IS 4984 and

BIS certification for laying of underground 11KV / 22KV

XLPE cable up to 300 mm2 size.

8 9925000008 Labour work for RCC concreting on disputed location and CMT

repairing of damage portion of road crossing for the work

carried out for roads crossing as well as concreting &

muffing of ploes including all materials (1:2:4)

9 9925000009 Providing & fixing concrete stone route marker of 300 No

mm width x 150 mm thick x 650 mm height embedded in

earth at least 300 mm below & 350 mm above ground

level respectively at distance approx 50 meters along the

length of cable. The RCC concreting (1:2:4)(all necessary

maeterials will be in bidder's scope) of route marker is to

be carried out 300 mm width x 150 mm thick x 300 mm

below ground level as per instruction of EIC. The route

marker should be with name of company with approved

yellow colour-DGVCL. The distance from marker to cable

and cable depth with feeder name etc., marked with

arrow sign is to be painted on it.The route marker is to be

fixed at location near to any fixed permanent location

(not necessary to fix exact on top of cable) as per

instruction of EIC.

10 9925000014 Labour charge for erecting of 11kV / 22 kV XLPE cable of Per Job

size up to 300 mm 2 on DP Structure with fixing of 02 Nos

polymer cleats on top and middle part. Polymer cleats,

nut bolts etc. fixing material to be provided by contractor.

11 9925000015 Providing & fixing of 6.11kg/cm2, class-4,Green color, Per Job

110mm O.D., 8.5mm thickness H.D.P.E. pipe confirms to

IS 4984 and BIS certification on the erected DP structure

for the mechanical protection of cable by inserting the

cable inside HDPE pipe. The HDPE pipe shall be erected in

such a way that 300mm shall be below the ground level

and the rest 2700 mm shall be supported on the DP

Structure with 01 No Polymer cleat. All materials

including polymer cleat and Nut bolt to be provided by

12 contractor.and fixing of pipe type earthing from 80 mm

9925000016 Providing No

dia class-B GI pipe with pit to be filled with salt & coke

and construction of chamber as per DGVCL Drg. No. dg

/100 for DP and cable. The earthing pit should be joined

with cable by G.I. strip of size 1” width & 2 mm thick. All

material GI pipe, Coke, Salt etc will be supplied by bidder.

13 9925000017 Supply & fixing of heat shrink type end terminations No

(outdoor) for upto 11kV 3C x 185 mm 2 size XLPE cable as

per DGVCL technical specification.

14 9925000018 Supply & fixing of heat & shrinkable end terminations No

(outdoor) for upto 22 kV 3C x 185 mm2 size XLPE cable as

per DGVCL technical specification.

15 9925000019 Supply & fixing of heat shrink type end terminations No

(indoor) for upto 11kV 3C x 185 mm 2 size XLPE cable as

per DGVCL technical specification.

16 9925000020 Supply & fixing of heat & shrinkable end terminations No

(indoor) for upto 22 kV 3C x 185 mm 2 size XLPE cable as

per DGVCL technical specification.

17 9925000021 Supply & fixing of heat shrinkable straight through joint No

for upto 11kV 3C x 185 mm2 size XLPE cableas per DGVCL

technical specification.

18 9925000022 Supply & fixing of heat shrinkable straight through joint No

type for upto 22kV 3C x 185 mm 2 size XLPE cable as per

DGVCL technical specification.

19 9925000023 Labour charge for excavation of 2100mm long x 1200mm No

wide x 1200 mm deep joint pits for installation of

11kV/22kV Straight through joints as per instruction of

engineer-in-charge & covering the cable with 150 mm dia

(Outer), thickness 25 mm, 1.0 meter long RCC half round

muffs & refilling same as per instruction of EIC .

20 9925000024 Providing and fixing of insulating bus bar , made from No

11KV/22KV XLPE cable after removal of semi conducting

layer and applying of PVC heat shrinkable anti-tracking

core insulating tubing (1.1KV), on both end terminal using

Aluminium long barrel heavy duty up to 240 sq mm lugs,

Aluminium bus connector. Taping with PG- clamp for bus

conductor as per drawing and as per instruction of EIC.

The Alluminium lugs and PG clamp shall be covered with

11KV/22KV HT insulating tapes.(11KV/22KV XLPE cable will

be in scope of DGVCL while all other materials will be in

bidder's scope)

21 9925000025 Testing of cable at various points and commissioning the No

feeder as per instruction of engineer-in-charge. Test

result shall be submitted by contractor with bill.

22 9925000026 Preparation and submission of 6 (six) copies, of complete Set

layout drawings with GIS mapping as per actual cable

routing showing road crossing, HDPE pipe sleeving,

jointing locations, markers etc.

23 9925000027 Providing and fixing of Sign Board at junction point Made No

out of 2 mm aluminium sheet size 750x300 mm (2.5 x 1ft)

rectangle, as per design, pre treated with phosphate

process and acid etching coated with one coat of epoxy

primer and two coats of best quality paints, refloctrorised

with Hi-Intensity retro – reflective sheeting as per the

latest and frame fabricated from suitable size iron angle.

The Sign Board is to be fixed on the base prepared from

channel and bracing angles which is grouted by means of

cement concreting of 1:2:4 for size of 300 mm dia x

mm height (500 mm to be grouted in ground). The details

to be displayed on sign board will be given by In-charge

(a) Hi intensity Micro prismatic Grade

24 9925000028 Providing and fixing of Sign Board (Danger Board) on No

Distribution Transformer Centers

Made out of 2mm aluminium sheet size 300x300mm

(1x1ft) as per design, pre treated with phosphate process

and acid etching coated with one coat of epoxy primer

and two coats of best quality paints, refloctrorised with Hi-

Intensity retro-reflective sheeting as per the latest and

frame fabricated from suitable size iron angle. The Sign

Board (Danger Board is to be fixed at the location as per

instruction of In-charge Engineer.

(a) Hi intensity Micro prismatic Grade

25 9925000029 Providing & fixing of aluminium tag of size 250 mm (L) x No

75 mm (W) from 3 mm aluminium sheet along with

mm dia aluminium binding wire for fixing of aluminium

tag near end termination joint at DP structure for

identifyng the cable. The details of feeder i.e. 11 / 22 KV

with feeder name shound be punched on the tag by letter

punch of size 16 mm as per instruction of In-charge

26 9925000030 Supply & fixing of heat shrink type end terminations Nos

(outdoor) for 11kV 3C x 240 mm2 size XLPE cable as per

DGVCL technical specification.

27 9925000031 Supply & fixing of heat & shrinkable end terminations Nos

(outdoor) for 22 kV 3C x 240 mm2 size XLPE cable as per

DGVCL technical specification.

28 9925000032 Supply & fixing of heat shrink type end terminations Nos

(indoor) for 11kV 3C x 240 mm2 size XLPE cable as per

DGVCL technical specification.

29 9925000033 Supply & fixing of heat & shrinkable end terminations Nos

(indoor) for 22 kV 3C x 240 mm2 size XLPE cable as per

DGVCL technical specification.

30 9925000034 Supply & fixing of heat shrinkable straight through joint Nos

for 11kV 3C x 240 mm2 size XLPE cableas per DGVCL

technical specification.

31 9925000035 Supply & fixing of heat shrinkable straight through joint Nos

type for 22kV 3C x 240 mm2 size XLPE cable as per DGVCL

technical specification.

32 9925000047 Laying of any size of 11/ 22 KV XLPE /PILC Cable in per cable

redaymade trench or in open space per mtr

Labour charges for Lying of O/H XLPE cable pole to pole

34 9925000064 Supply of 150 mm dia (Inner), thickness 25 mm, 1.0 NO.

meter long RCC half round pipe

Erection of D.P. (double pole) structure using 9 / 11 Mtr.

RSJ pole with cable connection arrangement along with

fitting of necessary fabrication for 11KV cable including

excavation of pit & refilling of earth as per instruction of

EIC. (Exclusive of concreting & muffing of poles)

Erection of Single pole structure using 9 / 11 Mtr RSJ pole

with cable connection arrangement along with fitting

ofnecessary fabrication for 11KV/22 KV cable including

excavation of pit & refilling of earth as per instruction of

EIC. (Exclusive of concreting & muffing of poles)

Erection of D.P. (double pole) structure using 8.0 Mtr. PSC

pole with cable connection arrangement along with fitting

of necessary fabrication for 11KV cable including

excavation of pit & refilling of earth as per instruction of

EIC. (Exclusive of concreting & muffing of poles)

Erection of Single pole structure using 8.0 Mtr PSC pole

with cable connection arrangement along with fitting

ofnecessary fabrication for 11KV/22 KV cable including

excavation of pit & refilling of earth as per instruction of

EIC. (Exclusive of concreting & muffing of poles)

40 Laying (including installation, testing and commissioning) mtr 335 as per rate derived by UGVCL letter no

of various size of ugvcl/r&c/ug/Cost Data-2022-23/816 Date:-27-

Single circuit 11 KV 300 sq mm XLPE insulated Aluminium 01-2023

armoured Cable in ground 1200 mm deep and 300 mm

wide trench, providing sand cushioning below (75 mm

thick layer of sand) and above (75 mm thick layer of sand)

of the cable and covering it with RCC half round hume

pipe (150 mm inner

diameter with thickness of 30 mm and One meter in

length) before refilling

pre-bonding tap/warning tap should provide below

(including installation, testing and commissioning) mtr 468 as per rate derived by UGVCL letter no

size of back filling the same to make ground ugvcl/r&c/ug/Cost Data-2022-23/816 Date:-27-

level as circuit

Double per original.

11 KV 300 sq mm XLPE insulated 01-2023

As per specification

Aluminium armoured and drawing

Cable of DGVCL.

in ground 1200(mm

wide trench, providing sand cushioning

below (75 throughout

mm thick on cable

of sand) andgap).

thick layer of sand) of the cable and covering it with RCC

half round hume pipe (150 mm inner diameter with

thickness of 30 mm and One meter in length) before

refilling pre-bonding tap/warning tap should provide

below 700 mm from the ground level and back filling the

same to make ground level as per original. As per

specification and drawing of DGVCL. ( RCC half round pipe

should be provide throughout on cable without gap).

42 Supply & fixing of heat shrink type end terminations No 5549 as per rate derived by UGVCL letter no

(indoor) for 11kV 3C x 300 mm 2 size XLPE cable as per ugvcl/r&c/ug/Cost Data-2022-23/816 Date:-27-

technical specification. 01-2023

43 Supply & fixing of heat shrink type end terminations No 6676 as per rate derived by UGVCL letter no

(outdoor) for upto 11kV 3C x 300 mm2 size XLPE cable as ugvcl/r&c/ug/Cost Data-2022-23/816 Date:-27-

per technical specification. 01-2023

44 Supply & fixing of heat shrinkable straight through joint No 8040 as per rate derived by UGVCL letter no

for 11kV 3C x 300 mm 2 size XLPE cableas per L technical ugvcl/r&c/ug/Cost Data-2022-23/816 Date:-27-

specification. 01-2023

Rate as per SOR 50,00,000/-

Executive Engineer (O&M)

DGVCL, Division Office,