COMPOUND WALL

Augoring and boring of holes in site for Bored cast-in-situ RCC Piles for building foundations in loamy, clayey soils like Black cotton soils and ordinary soils without under reams as per IS 2911 as per approved 1 designs including all operations, incidental, labour charges, hire charges of machinery, augur bore drill and shell equipment, etc, complete for all depths and for finished item of work for piles of following diametres.

Supply and placing of the M25 Nominal Mix Concrete corresponding to IS 456 using WEIGH BATCHER / MIXER with 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc, to site and including sales & other taxes on all materials including all operational, incidental and labour charges such as weigh batching, machine mixing, pouring concrete by tremmy, curing etc, complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No 402) with minimum cement content as per IS code from standard suppliers approved by the department including tremmy pumping, laying concrete, curing etc complete but excluding cost of steel and its fabrication charges for finished item of work

For Plinth Beam

Providing High Yield Strength Deformed (HYSD)/ Thermo Mechanically Treated (TMT) / Mild steel (MS) steel bars (Fe 415/ Fe 500 grade as per IS 1786-1979) of different diameters for RCC works, including labour charges for straightening, cutting, bending to required sizes and shapes, placing in position with cover blocks of approved materials and size and tying and lap-splicing with binding wire of 18 SWG, forming grills for reinforcement work as per approved designs and drawings, including cost and conveyance of steel bars, including all wastages such as overlaps, couplings, chairs, spacer bars including cost and conveyance of binding wire, cover blocks and all incidental, operational, labour charges such as cutting, bending, placing in position, tying including sales and other taxes on all materials etc., complete for finished item of work in all floors. (APSS No.126)

Masonry work in CM (16) prop with Flyash Cement solid blocks of size 290 x 225 x 140 mm for manufacturing of flyash solid blocks using flyash of 80 kgs, cement of 15 kgs. Gypsum of 5 kgs and stone dust including cost and conveyance of all materials, labour charges, seiniorage charges, scaffolding and curing ete, cpomplete with a compresive streangth not lessthan 50 kg/sqm for walls for Superstructure Walls.

Plastering with CM (1:4), 12 mm thick including Cost & Conveyance of 5 all materials and labour charges for mixing and curing etc., Complete as per S.S.

Painting to the External walls with 2 coats of Acrylicemulsion paint of Weather Proof Water based exterior Grade having VOC (Volatile Organic Compound) antain less than 50 Grams per liter of approved brand and shads including one coat of cement primer 6 after throughly brushing the surface to remove all dirt and remains of loose powdered materials including cost and conveyaance of all materials to work site and all operational incidental, labour charges etc., complete for finished item of work as per SS 911 for Externals Walls.

Manufacture, supply, delivery and fixing of Window grills. Compound wall grills, Iron Doors, Windows made with MS flats etc including welding. finishing, applying red oxide paint as primary coat etc complete unit 1.00 kgs

Painting to new iron work with synthetic enamel paint two coats. 8 over pirmary coat with red oxide paint including cost and conveyance of all materials and labour charges etc complete

Collection and spreading of good gravel including cost and conveyance of all materials to work site all labour charges and stacking to departmental guage etc, complete as per SS

LED Street light Luminaire Supply and transportation of made of pressure diecast alluminium body with powder coated, having protective toughned glass, Supply Input voltage 120 270 V AC, P.F0 90, high power LED's having System efficacy > 100 lm/W and junction temprature < 70°C. with Ingrees protection 10 IP66, Luminaire performance complies to IS 10322 (Part 5 / Sec 3), Driver surge protection 4KV, In house additional Surge protection 10 KV with optics distribution THD<10% at 110 Volts AC, driver efficiency >90%, CCT 3000K 5700K, mınımum CRI>70, etc., complete Makes As per list of recommended brands as category I.