SPECIAL REPAIR TO MOSQUITO PROOFING AND TILING ON WALLS AT BLDG NO EW 108 AND COMPOUND WALL AT BLDG NO P 11 AND PROVN OF OFFRs WASHROOM IN BLDG NO P 29 AT IMA DEHRADUN

Amount

Dismantling plain or corrugated steel sheeting, any gauge, thickness in roof coverings.

Dismantling timber scantling 40 sqcm & over in section unframed in any position.

Dismantling wall and ceiling boards, any thickness including cover fillets.

Demolition of brickwork built in cement mortar as in walls, parapets and pillars including all quoins, arches, pillars, etc.

M&L for brick work with sub class 'B' bricks built in CM 1:6 straight or curved on plan & exc 6 m mean radius with old size bricks.

M&L for brick work with sub class 'B' bricks, in half brick thick wall built in CM 1:4 straight or curved on plan to any radius with old size bricks.

S&F rolled mild steel sections as in main and cross beams, hip and jack rafters, purlins etc including cleats and other connecting plates etc confirming to Fe-290 (Gde E165)

M&L for Bands, straps, including bolts, if required, clamps, hooks for hanging fans, plain angle cleats for securing purlins to trusses or rafters two way or three way straps, and similar small articles conforming to Fe-290 Gde-E-165.

S&F Mild steel screw bolts (machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, exc 15 cm but n exc 22.5 cm long and dia of neck 11 to 15 mm including drilling holes to wooden members as directed.

S & F Pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50 mm thick of any colour as directed by GE having tensile strength of 550 Mpa as in roof covering, fixed with self tapping screws complete all as specified and directed.

S & F pre-painted galvalume aluminium zinc coating GI based plain steel 0.50 mm thick for ridge cover of any colour as directed by GE having tensile strength of 550 Mpa as in roof covering, fixed with self tapping screws complete all as specified and directed.

S & F false ceiling of Designer ceiling tiles Ivory painted ready to use (made of high-quality Fibre cement boards ) of size 595x595mm and any one of the design (Cascade or Electra texture of Everest or equivalent) in true horizontal level, suspended on exposed inter locking metal grid of hot dipped galvanised steel section (Galvanised @120 grams, both side inclusive a black painted groove on all T webs) consisting of main T runner with suitably spaced joints to get required length made from 0.30 mm thick sheet spaced at 1200mm c/c and cross 'T' of size 15x32mm made of 0.30mm sheet 1200mm long spaced between main 'T' at 600 mm c/c to form a grid of 1200x600mm and secondary cross 'T' of length 600mm and size 15x32 mm made of 0.30mm thick sheet to be interlocked at middle of the 1200x600 mm panel to form grids of 600x600 mm and wall angle of size 24x22x0.40mm and laying false ceiling tiles in the grid including, required cutting/making, opening for services like diffusers, grills, light fittings, fixtures, smoke detectors etc. Main 'T' runners to be suspended from ceiling using GI soffit cleats fixed to existing RCC lintel or roof members with dash fasteners, GI adjustable wire of 2mm dia, spaced at 1200mm c/c along main 'T', bottom exposed width of 15mm of all 'T' sections, GI wire shall be pre-painted with polyester paint and black painted groove at centre of size 4mm depth and 4.5mm width, fixed at any height as directed.

Dismantling floor or wall tiles including cement mortar bedding.

Demolition of stone slabs and tiles of any description or thickness in floors, aprons etc. Laid, bedded and pointed in any mortar complete all as directed and specified.

Demolition of cement concrete in ground floors, pavings and plinth protection n exc 15 cm thick.

M & L for 75 mm thick cement concrete type D-2, 1:4:8 (40mm graded crushed stone aggregate) including necessary form work as in sub base for flooring etc., complete all as specified.

M&L for Chequered coloured cement concrete tiles, rubber moulded glossy finish of size 300 x 300 x 25 mm thick machine pressed set jointed and pointed in neat cement slurry over 15 mm thick screed bed CM 1:6 in floors with grey cement and pigment completed all as specified.

M & L for 20 to 25 mm thick machine cut Kota stone slab as in flooring, with and including 15 mm thick screed bed in CM 1:6, Kota stone shall be in single piece for treads and risers, laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including necessary grinding, rubbing and polishing incl full round bull nosing complete all as specified and directed.

M&L for 16 to 20mm thick Makrana white marble stone in border to Kota stone flooring with and including 15mm thick screeding bed in CM 1:6 complete all as specified.

M & L 16 mm thick granite (colour as approved by GE) stone slab machine cut, bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding and polishing as in kitchen platform / dado / skirting / window cill/ platform counter top WHB including cutting holes for oval shape etc. including 15 mm thick cement screed bed 1:6 CM in horizontal or vertical surfaces including grinding the edges half round and polishing complete all as specified and directed by Engineer-In- Charge.

M & L for 8-10 mm thick vitrified tiles of light shade of size 600 x 600 mm in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match incl screed bed or bedding layer of mortar, 15 mm thick, in cement mortar 1:6,complete all as specified and directed.

M & L for 25 mm thick PCC 1:2:4 type B-0, using 12.5 mm graded stone aggregate as in floors, to receive surface of tile complete all as specified and directed.

M&L Glazed ceramic tiles coloured 300mmx 450mm , 7 to 8 mm thick, on vertical surface of wall such as skirting/ dados, set and jointed in neat cement slurry and pointed in white or colour cement to match with and including 10 mm thick rendering in CM 1:4, complete all as specified and as directed.

M&L for RCC 1:2:4 type B-1 (using 20 mm graded stone aggregate) as in coping/benching including weathering, slightely rounded or chamfered angles and throating etc including necessary formwork and demolition completed all as specified and directed.

M&L for PCC 1:3:6 type C-1 (20 mm graded stone aggregate) as in surface channels and drains. (Saucer Drain)

M & L for extra for forming fair finished drain or channel 30 cm inner girth in cement concrete, using extra cement incl forms, moulds, mitred/ stopped ends etc. complete.

Taking down cement or cement lime plaster/tile work on brick or stone wall etc. including racking out joints, hacking for key and scrubbing down with water etc. complete all as specified and directed.

Raking out joints/ pointing to brick work/stone masonry in wall etc built in cement mortar.

M&L for 15mm thick rendering on other than fair faces of brick/ concrete surfaces in CM 1:6 finished even and fair.

M&L for 15mm thick rendering on fair faces of brick/ concrete surfaces in CM 1:4 finished even and fair without using extra cement. Complete all as specified and directed.

M&L for complete removal of existing treatment from walls.

M & L for preparation of new or old wall surface and applying 0.75 to 1 mm thick Birla white/ JK wall care putty over internal and external plaster to make the surface smooth as specified and directed.

M&L for preparation of new plastered or unplastered surfaces of walls and applying two coats of distemper oil emulsion, white or tinted, over one coat of alkali resistant primer complete all as specified & directed.

M&L for preparation of new plastered or unplastered surfaces of walls and applying three coats of white wash on walls. all as specified & directed.

M & L for applying two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces.

Taking down chowkats or frame with shutters (without taking off shutters from the frame) exc 1.5 sqm and n exc 4.0 sqm each including cutting holes for taking out of holdfast & making good in CM (1:4) after fixing new chowkats complete all as specified.

All as per item No 36 above but not exc 1.5 Sqm each.

S&F 1.25 mm thick pressed steel frame of size 165 X 60 mm for door with one or more rebate including necessary fixing lugs, hinges, locks strike plate etc complete all as specified and as directed .

S&F 1.25 mm thick pressed steel frame of size 105 X 60 mm for door with one rebate including necessary fixing lugs, hinges, locks strike plate etc complete all as specified and as directed .

M&L for cement concrete 1:3:6, type C-0 (12.5 mm graded stone agg) as in bedplates, filling in pressed steel door frames etc. including all necessary formwork etc. complete all as specified.

M&L for aluminum alloy powder coated standard hollow section as mentioned below window frame (Bombay sliding) with two glazed shutter and one Nos wire gauged shutter sliding type, with aluminum sections as per Series-B (18mm) 3 track of Jindal section( section No 20957 wt 0.911 Kg/Rm, thickness of section 1.10 mm for sliding windows, and glazed with tinted glass coloured glass 4.5 mm thick, fixed with glazing clips, rubber beading / gasket anodised beading, screw and lock type 2 Nos aluminium handle of size 75mm and locking system including aluminium grill of 5 mm thick, average width of aperture 50mm and SS wire cloth 0.36mm dia of wire and 1.40 aperture complete all as specified and directed.

S&F second class hard wood (factory made), 35mm thick glazed, and skeleton factory made door shutters open rebated & prepared to receive, glass, gauge etc. (with sash bars any number), edge of framing plain, chamfered or rounded fitted with cut and mitred beads for securing glass etc, size of members of shutters as specified in SSR Part I, Section 8, clause 8.24(a); supplied and fitted to chowkats

S&F 35 mm thick flush shutters, solid core construction, with particle board core and plywood face panels, covered with decorative face veneer with lipping/frame to match on bothsides.

Supply and fixing mild steel powder coated 300mm, ordinary rat tail rod pattern springs including roller and roller plate complete all as specified.

S&F wire netting of stainless steel wire 1.4mm dia and size of mesh 20 mm fixed with tinned tacks of stainless steel wire staples.

S&F in repairs stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.40mm fixed with stainless steel wire staples.

S&F mild steel butt hinges medium weight cold rolled , size 100 mm.

S&F 150 mm long aluminium handle, cast type, anodised etc complete all as specified

S&F Aluminium anodised tower bolt 200 mm long of extruded section etc complete all as directed and specified.

S&F double legged floor door stopper 100 mm long of stainless steel with rubber etc complete all as specified and as directed

S&F stainless steel (304 grade) sliding door bolt with round nuckle of 300 mm long with hasp and staple (dia of bolt 16 mm) complete all as directed and specified.

M&L for preparation of new wooden surfaces over 10cm width or girth and applying two coats of synthetic enamel paint over one coat of pink primer

M&L for preparation old painted wooden surfaces of any description over 10cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed.

S & F 25 mm dia Stainless Steel 1 mm thick curtain rod including fancy type brackets, and decorative end caps etc. fixed to wall complete all as specified.

M&L for reinforced cement concrete 1:2:4 type B-1 (using 20mm graded stone aggregate) (nominal mix) as in slabs supported on wall, slabs and in shelves and like in repair to Chajjas, Claddings, soffits etc complete all as specified and directed.

M&L for form work to sides and soffits of shelves etc, rough finished surfaces of concrete flat, complete all as specified and directed.

S&F in repair Factory made heavy duty precast RCC Manhole cover confirming to IS 12592 (Part -1 & II) 75mm thick of M-30 Grade of concrete of various size as directed by Engr-in-Charge and suitably reinforced with strong vibrating compaction by vibratory table including providing MS hook duly black painted, complete all as specified and directed.

Taking down steel tubing and connections, incl cleaning for refixing or removal to store, 15mm bore of pipe

Taking down steel tubing and connections, incl cleaning for refixing or removal to store, 20mm bore of pipe

S&F medium grade galvanized steel tubing with all fittings &fixed complete to walls & ceiling or laid in floors 15 mm dia bore pipe (including in short length) complete all as specified and as directed

S&F tubes medium grade galvanized with all fittings and laid in trenches, 20 mm dia bore pipe (including in short length) complete all as specified and as directed

S&F in repairs 1000 litre rotational moulded triple layer polyethylene water storage tanks white colour (cylindrical vertical with closed top) hoisted and fixed in position complete all as specified in SSR Part-I complete all as specified and directed.

S&F in repair 20 mm dia Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed.

S&F 20mm bore Ball valves high pressure of PTMT with epoxy coated Aluminium rod & high density plastic ball screwed for iron pipe and fixed.

S&F in repair vitreous china wash hand basin white flat back of size 550x400mm, including brackets, CP waste coupling & waste pipe complete all as specified and directed

S&F in repairs Sink made of stainless steel 1 mm thick kitchen or laboratory with plugs, coupling, washers and waste pipe including bedding in cement morter on to dwarf wall or including fixing cantilver brackets overall size 915mm x 460mm bowl size 410mm x 330mm x 160mm complete all as directed.

S&F in repair 15mm size PVC connection with PTMT nuts length 450mm long

S&F in repair stop valves/ angle valve 15mm bore fancy type chromium plated, screwed down, high pressure, screwed both ends for iron pipe or for unions and fixed.

S&F in repair 15mm bore brass CP fancy type pillar tap for wash basin screwed down for iron pipe and fixed complete.

S&F in repair 15 mm bore chromium plated, fancy type. long body bib taps, cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed.

M&L for preparing surfaces of wood and wood based materials, new or old, of any description and girth, not otherwise described and treated with creosote.

M&L preparing new steel or iron surfaces over 10 cm width or girth and applying two coats of Synthetic enamel paint over one coat of red oxide primer.

Excavation in trenches n.exc 1.5m wide and n.exc 1.5m in depth for foundation, etc or for shafts, wells, cesspits, manholes, pier holes, etc n.exc 10 Sqm on plan and n exc. 1.5 m in depth and getting out in soft/loose soil complete all as directed.

Removal of surplus soil to distance exceeding 250 metre but n. exc. 500 metre and depositing as directed at a level n. exc. 1.50m above the starting point complete all as specified and directed.

M&L for PCC 1:4:8 type E-2, using 40 mm graded stone agg as in foundation, filling, mass concrete and sub base of floor complete all as specified and directed

M&L for 15mm thick ready mix external cement plaster on brick, concrete surfaces and Ceiling, surface finished even & fair, finishing, curing scaffolding complete all as specified and directed. Make : ACC (Suraksha)/Ultratech (Readyplast)/Birla (Aerocom)/Unicrete

M&L for Mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed.

As per item No 78 above but 8 mm dia as in stirupps, spacers and binders complete all as specified

M & L Formwork to sides of pillars, posts, struts, piers, columns and stanchions, copping, for flat & rough finished surfaces of concrete complete all as specified

S&F MS framed work as in doors or gates of angle or other section with gusset plates, rails, braces etc complete drilled for fixing of steel sheeting or other covering. Doors, etc to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings and hanging: also fastening and fixing complete all as specified and directed

M&L for Mild steel, plain, black/green sheet 1.00 mm thick in wall cladding, steel gates and similar work, cut to size, holes punched; including round headed screws, clout nails or rivets and fixed to wood or steel framing with plain 40 mm lap joints with riveted or welded seams, including bending or turning up, mitred angles, etc. as required complete all as specified and directed

M&L for wall cladding coloured tiles of size 450x300x7-8mm thick, as in vertical surfaces such as dado, skirting etc set and jointed in neat cement slurry and pointed in epoxy coating grout to match including rendering 10mm thick on fair faces of brick work or concrete surfaces in CM 1:6 for receiving tiles complete all as directed.

M&L for Preparation of new steel surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed

M&L for Preparation of surfaces of wall / ceiling and applying two coats of weather coat exterior paint over a coat of primer and over a coat of 3mm thick white cement base water proof putty including sanding/grinding complete all as specified and directed.

M&L for fibre reinforced liquid applied elastomeric waterproofing membrane PU-Acrylic Hybrid Polymer on door/window chajjas, Roof, wall etc by scrapping of damaged portion and preparing the surfaces by 15 mm thick rendering in CM 1:3 and finished even and smooth using extra cement over concrete surfaces and benching including weathering slightely rounded or chamfered angles and applying a coat of PU (01 ltr/sqm appyling area) over a coat of priming coat of the same component all as directed by Engr-in-charge (work to be carried out upto a height of 7.5 m and rate shall be inclusive of all necessary scaffolding and shuttering). Make : Dr fixit, Sika, Fosroc, Berger

Surface excavation n.exc (not exceeding) 30 cm deep and averaging 15cm deep and getting out in hard /dense soil complete all as specified.

Returning, filling incl spreading leveling watering and well ramming in layers not exceeding 25mm in any type of soil.

M&L for reinforced cement concrete M-25 (20mm graded aggregates) design mix as in foundations, including rafts, footings, foundation, beams; plinth beams; bases for columns, etc.; basement slabs, under-reamed piles and mass concrete complete all as specified and directed.

M&L for reinforced cement concrete M-25 (20mm graded aggregates) design mix columns, pillars, piers,posts and struts complete all as specified and directed.

M&L for reinforced cement concrete M-25 (20mm graded aggregates) design mix as in beams, cantilevers,bressummers, lintels over 1.5m span all as specified and directed.

M&L for reinforced cement concrete M-25 (20mm graded aggregates) design mix as in slabs supported on walls, beams and columns in floors,roofs, landings, balconies,canopies, deck slabs and in shelves and the like complete all as specified and directed.

Formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams,sides and soffits (if any) of foundation and plinth beams;and similar work; vertical or to batter for rough flat finished surfaces of concrete,complete all as specified and directed.

Formwork to flat sides and soffits of or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including supports, overhangs, etc. also splays between floors and beams, complete as per specified

Formwork to soffits of suspended flat slabs such as roof slabs, landings and similar work; not exceeding 200mm thick (Horizontal or sloping) complete as per specified

Formwork to edges of concrete flats, treads breaks in floors, window cills, concrete railings,openings in concrete walls, floor and roofs n exc 20cm wide and sides of RCC/PCC bands in wall, horizontal or sloping and similar work exc 10cm but n exc 20cm wide.

M&L for 10 mm thick on fair faces of brick /concrete surfaces in cement mortar 1:6 and finished even and smooth without using extra cement complete all as specified.

M&L for 05 mm thick CM 1:4 rendering on fair surfaces of ceiling work and finished even and smooth without using extra cement all as specified

M&L for 10 mm thick rendering as backing coat to receive the tiles on fair faces of brick /concrete surfaces in cement mortar 1:3 and finished even and rough complete all as specified.

M&L for Two coats of oil bound distamper on new surfaces over a coat of primer on internal walls/ ceiling surface complete all as specified and directed.

Material & Labour for applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over old surfaces all as per manufacturers instruction and directed by EIC

M&L Shingle filling in floors or pavings, laid in layers n exc. 15 cm thick, spread, levelled, and blinded with earth and rammed including watering complete all as specified.

M&L 75 mm thick cement concrete (1:4:8) type D2 as sub base to floor as specified.

M&L for 25mm thick cement concrete 1:2:4 type B-0 using 12.5mm graded crushed stone aggregates as in floor and finished even and fair complete all as specified.

M&L for 10mm thick screed bed or bedding layer in cement mortar 1:4 for laying floor finishes complete all as specified.

M&LColoured Vitrified tiles 9 to 10 mm thick (square/ rectangular) polished, size of each tile 1200x600x9 to 10mm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of existing surfaces complete all as specified and directed. Note : The contractor shall have no claim on difference what so ever on shade/colour of tile.

M&L for coloured glazed ceramic tiles size (1200 mm x 600 mm x 8 to 10mm thick) set and jointed in neat cement slurry and pointed with white or coloured cement mixed with pigments in vertical surfaces complete all as specified and directed. Note : Contractor shall have no claim on colour or shade what so ever on this account.

M&L for 75 mm thick cement concrete 1:2:4 type B-1 (using 20mm graded crushed stone aggregate) as in plinth protection laid in alternate bays (n exc 2 sqm each) area with 6mm wide joints and 10mm wide joints between the walls and plinth protection, finished even and smooth without using extra cement, outward slope of not less than 1:12, the joints shall be filled with mastic filling comprising one coat of bitumen 85/25 grade and three parts of sand by weight, complete all as specified.

S&F Factory made single extruded WPC (Wood Polymer Composite ) soild door/ window Ceostory windows & other frame / chowkhat single/double patam of size 65 x 100 mm comprising of virgin PVC polymer of K value 58-60 (Supension Grade) , calcium carbonate and natural fibers (wood powder / rice husk / wheaat husk ) and non toxic additives ( maximum toxicity index of 12 for 100 gms ) fabbricated with miter joints after applying PVC solvent cement and screws with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withrawal strength of 2200 N cum , (Face) & 1100 N (Edge) , minimum compressive srength of 58 N/mm², modules of elasticty 900 N/ mm² and resitance to spread of flame of class A category with property of being termite / borer proof , water / moisture proof and fire retardant. and fixied in position with MS hold fast/ lugs / SS dash fasteners of required dia and length complete as per direction of Engineer-In-Charge.(M.S. hold fast/ lugs or SS dash fasteners shall be paid fo separately ) . Note : For WPC solid door/ window frames , minus 5mm tolerance in dimension i.e. depth and width of profile shall be acceptable . Variation in profile dimension on plus side shall be accepetable but no extra payment on this account shall be made.

S&F Providing and fixing factory made single extruded WPC (wood polymer Composite ) soild decorative type flush door shutter of size 30 mm thick comprising of virgin polymer of K value 58-60 (suspension Grade ), calcium carbonate and natural fiber (wood powder/ rice husk / wheat husk) and non toxic additives ( maximaum toxicity index of 12 for 100 gms ) having minimum density of 650 kg/cum and screw whithrawal strenght of 1800 N (Face ) & 900 N (Edge ) , minimum compressive strength 50 N/mm² , modulus of elasticity 850 N/mm² and resistance to spread of falme of Class A category with property of being termite /borer proof , water/moisture proof and fire retardant . WPC to be laminated with PVC foil of minimum 14 microns thic of approved desing pasted with hot melt adhesive on both faces of shutter and fixing with stainless steel but hinges of required size with necessary full body threaded star headed counter sunk S.S screws., all as per direction of Engneer-In -Charge . ( Note : Stainless steel but hinges and necessary S.S srews shall be paid seprately )

S&F Aluminium anodised double shutter ventilator (glazed and wire gauge) top hung with aluminium ventilator frame or chowkat 1.5 mm thick aluminium anodised of size 100 mm x 44.5 mm and ventilator shutter frames glazed and wire gauze 1.5 mm thick aluminum anodised of size 44.5x44.5 mm incl aluminium grill ,Stainless steel wire Mesh and all fitting such as rubber gasket aluminium glazing clips and including 5.5 mm thick tinted glass pane in glazed shutter fixed with rubber gasket and glazing clip/aluiminium beads aluminium tower bolt 75mm 02 Nos in each shutter , aluminium butt hinges 50 mm 02 Nos in each shutter aluminium handle 75 mm 01 No in each shutter incl all accessories complete all as specified and directed.

S & F Fancy and decorative type 150mm long brass barrel, semi barrel and skeleton tower flush bolts type 2 and fixed flush complete all as specified and directed.

S & F 150 mm butt hinges, cast brass with mild steel hing pin bright polished and fixed type B-11 complete all as specified and directed.

S & F Fancy type and decorative 150mm log extruded brass handles fabricated type polished complete all as specified and directed.

M&L for 10 mm thick rendering in CM 1:3 on roof sufaces, finished even and smooth without using extra cement complete all as specified. Note :- Supply only water proofing compound shall be measured and paid seperately under the respective item.

M&L for Applying bituminous primer on roof surfaces @ 0.40 liters/Sqm and applying one coat of semi hot blown bitumen of grade 85/25 @ 1.20 Kg/Sqm and thereafter supply and laying 3mm thick polymeric water proofing membrane, five layered, of weight not less than 3 Kg per Sqm with centre layer core of 90 micron high molecular density polyethylene film and bonded completely to the surface with overlap of 10 cms (overlaps to be thermo fused by flame) followed by another coat of semi hot blown bitumen 85/25 grade bitumen @ 0.70 Kg/Sqm and provide aluminium paint as per manufacturing instruction all as specified and as directed. Note:- Water proofing treatment will be done by IWL or through a specialized agancy.

S&F for steel water tubing of nominal bore dia 15 mm medium grade galvanised with all fittings including short lengths, fixed to walls, concealed in wall and ceiling or laid in floor complete with all fittings( such as bends, elbows, Tee, short pieces, connectors, back nuts, diminishing pieces, caps and plugs, unions etc.) complete all as specified.

S&F for steel water tubing of nominal bore dia 20 mm medium grade galvanised with all fittings including short lengths, fixed to walls, concealed in wall and ceiling or laid in floor complete with all fittings( such as bends, elbows, Tee, short pieces, connectors, back nuts, diminishing pieces, caps and plugs, unions etc.) complete all as specified.

S&F for 20mm dia, Ball brass, high pressure, with polythene float and flynut complete, screwed for iron pipe or brass ferrule and fixed, complete all as specified .

S&F 20mm Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified .

S&F for 1000 ltrs capacity rotational moulded polythylene water storage tank (Cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I.

S&F single piece Vitreous china any shade cascade floor mounted single piece water closet P/S trap with dual flush cistern for UF soft close slim seat cover, hinges fitting, conversion bend, fixing accessories set complete all as specified and directed. Make : Jaquar Cat part No FSS-WHT-29853S300UFSM Cera cat part No S1013105/Kajaria cat part No KB-3007

S&F Vitreous china full set Table Top wash basin, white, flat back, size 585x450x220mm including bracket, CP brass waste coupling and waste pipe fixed in repair complete all as directed. Make : Jaquar Cat part No Jaguar FLS-WHT-5801 & 5301/Cera cat part No S2040112 & S2090107 or equivalent in Kajaria/Somany

S&F Corner glass shelf assembly with bracket complete all as specified and as directed.

S&F in repair toilet paper holder with flap guard fixed to walls with chromium plated brass screws.

S&F soap dish holder fixed to walls with chromium plated brass screws.

S&F soap dispenser fixed to walls with chromium plated brass screws.

S&F CP brass hot & cold single lever tall body basin mixer with 450mm long braided hoses cast copper alloy with centre hole for WHB complete all as directed by Engineer-in-charge. Make : Jaquar Opal Prime Series/ Cera Ruby series/Somany Bellis Series

S&F CP brass hot & cold 15mm dia wall mixture for mixing hot & cold water with connecting legs & flanges in complete all as specified. Make : Jaquar Opal Prime Series/Cera Ruby series/Somany Bellis series

S&F 15mm bore long body bib tap chromium plated fancy type with wall flange and aerator fixed complete all as specified and directed. Make : Jaquar Opal Prime Series/ Cera Ruby series/Somany Bellis Series

S&F CP fancy type Angle valve 15mm dia (angle cock) cast copper alloy with wall flange. Make : Jaquar Opal Prime Series/ Cera Ruby series/Somany Bellis Series

S&F CP fancy type twin Angle valve 15mm dia (angle cock) cast copper alloy with wall flange. Make : Jaquar Opal Prime Series/ Cera Ruby series/Somany Bellis Series

S&F CP Health faucet telephonic type with CP with 1.5m long flexible pipe.

S&F CP brass overhead shower square fancy type 100x100 mm with extension CP Arm pipes.

S&F brass chromium plated towel ring fixed with screw in wall complete all as specified and directed.

S&F brass chromium plated towel rail, 600mm long.

S&F brass chromium plated towel rack with hooks, 60cm long between flanges complete all as specified and directed.

S&F Viterous China full set automatic urinal sensor white including brass CP Bottle trap of suitable size, CP waste coupling and SS grating etc. complete all as specified and directed. Make : Cera Cat Pt no S4010102 or equivalent in /Jaquar/Somany/ Hindware

S&F cast iron soil, waste and vent pipes (sand cast) 100mm bore in any length with or without ears with cement joints laid in trenches or in floor all as specified.

S&F cast iron soil, waste and vent pipes (sand cast) 75mm bore in any length with or without ears with cement joints laid in trenches or in floor all as specified.

S&F cast iron soil, waste and vent pipes (sand cast) 75mm bore in any length with or without ears with cement joints fixed to wall all as specified.

S&F Cast iron bend (any radius) diminishing pieces or tapers 100mm bore fitted with oval access door all as specified.

S&F Cast iron bend (any radius) diminishing pieces or tapers 75mm bore fitted with oval access door all as specified.

S&F 75mm bore Cast iron cowls all as specified.

M&L cast iron floor trap 75 mm, with SS grating including jointing to waste pipe fixed in cement concrete type B-1 (1:2:4) all as specified.

S&F stack clamps made out of 50mm by 5mm flat iron and 16mm dia round iron stays, including bolts and nuts and securing ends of stays to wall or roof for 75 mm bore complete all as specified.

Construction of Sockage wells excavation in any type of soil, foundation in PCC 1:3:6 walls of honeycombed masony with top ring of M25 concerete including intercepting chember andscreen chember made of brick masonary in CM, RCC cover slab in M25 /SFRCcover,interconnecting pipes of DWC complete filled with brick bats of size. size of sockagewell 2 Mtr x 2.5 Mtr effective depth.

S&F 18-19 mm thick prelaminated colour WPC sheet for cabinet shutter and frame &fixed at site colour as approved by Engr-in- Charge complete all as spd.

Taking down copper/aluminium point wiring (light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets etc. removing materials to store for keeping in safe custody or for taking credit (credit for above items should be made as per conditions separately) and making good disturbed surface of walls, floors, etc.

Taking down old U/S main switches, Sheatmetal enclosures DB including MCCBs, MCBs etc including making good to the disturbed surface of wall all as directed.

Taking down old unsv T/L, Lamp,Security light of any size and capacity all as directed.

Taking down carefully submain wiring including all accessories without disturbing existing wiring fittings fixtures etc and making good to the disturbed surfaces all as directed and as specified in any type and size all as directed.

One light point controlled by one, one way switch 5 Amps

One fan point/ exhaust fan point controlled by one, one way switch 5 Amps

One 3 pin 5 Amps switch socket outlet point controlled by one switch on independent board.

One 3 point 5 Amps switch socket outlet point controlled by one switch on the same board.

All as per item No 154 above but with stranded copper conductor 4 Sq mm (nominal area), two single core, PVC insulated cable 1100 Volt grade ISI-694 marked for 3 pin, 15 Amp socket outlet, independent, including PVC insulated stranded copper conductor 4 Sqmm (nominal area) single core as earth continuity conductor to common earth and connecting to earth dolly.

Supply and fix modular switch 1 way 10A, 1 Module

Supply and fix modular switch 1 way 20A, 1 Module with indicator lamp

Supply and fix modular socket 10A, 2/3 pin combined 2 Module

Supply and fix modular socket 10A/20A, 2/3 pin combined 2 Module

Supply and fix modular fan regulators step type 2 module 120W .

Material and labour for ceiling rose, 63.5 mm dia, ISI marked, three terminal of polycarbonate/isolated body complete all as directed. Make: Anchor, Crab tree, Ess Ess Kay

Supply and fix ceiling Fan complete with blades,down rods ,230 volts ,1200 mm sweep ,min air delivery 210 CFM with service value 6.00 BEE ,with Brushless direct current motor (BLDC) .

Supply and fix metal body exhaust fan 300 mm sweep, 900 rpm 230 volts 5h Hz, energy saving model single phase copper wound motor, grey in colour complete with blade, box type louvers etc, complete all as specified & as directed by Engineer- in -Charge.

Supply and fix in repir Sheet metal enclosure for DB`s SPN, with 200amps rated bus br, 12 way, 240 volts double door complete all as specified & as directed by Engineer- in -Charge.

All as per item No 164 above but 8 Way DB SPN

Supply and fix n repair MCB SP 6 to 32 Amps 240 volts 10 KA C series Make : Standrad /HPL/Legrand, Cplete all as specified & as directed by Enginer -in - Charge.

Supply and fix n repair MCB SPN 40 to 63 Amps 240 volts 10 KA C series Make : Standrad /HPL/Legrand, Cplete all as specified & as directed by Enginer -in - Charge.

S& F VTPN Distribution board empoxy powder coated fabricated from minimum 1.6 mm thick CRCA sheet and fixed/ flush to wall and suitable for universal mounting with fully insulated 250 Amps copper Bus Bar for each phase and 02 neutral shrouded bar, 2 earth bar and cable tie for cable management with reversible door for IP- 43 IK- 09, 415 volt including provision of 160/ 200 Amp MCCB FP as incomer and SP MCBs or TP MCBs as per site requirement ( or any combination of SP/ TP MCBs) outgoing of following capacity.

8 WAY VTPN DB TP & N DB( FP MCCB+24 MCBs) Make: 507747 of Legrand or equivalent in L&T/ Siemens.

S&F in repair MCCB 125 Amps 4 pole 415 volts with rupturing capacity 36 KA with thermal-magnetic release and adjustable overload setting complete all as specified and directed of following capacity.

Supplying, fixing & testing LED 34/ 36 Watts, 2' x 2' surface mounted ceiling light fitting, warm/ natural/ cool white as per requirement at site with glare free uniform illumination with electronic driver etc and all accessories pre wired including connecting to source complete all as specified & directed. Make- POLARIS NIO III LCTLSNE- 36 - FO- CDL Crompton/ PLUTO PANEL (SURFACE) of Havells or equipment in Philips as approved.

S & F LED tube;ight batten fitting 20/22 Watt of aluminium housing suitable for fixing on walls/ceiling, warm/natural/cool white as per requirement at site complete all as specified and directed by Engr-In-Charge.Make: BRIGHT LINEA of Crompton/LUMILINE PLUS NEO of Havells/ Essential SmartBright Batten of Phillips

Supply and fixing in replacement high pressure die cast aluminium led security light fitting 25 W , not less than 100 lumens/ watt, IP-66 colour temp not less than 6500, inbuilt electronic driver, PF not less than 0.90, inbuilt surger protection minimum

Material and labour for earthing with galvanised steel earth plate electrode 60cmX60cmX 6mm thick burried directly in ground (earth pit not less than2.25 mtr below ground level) with top edge of the plate not less than 1.5 mtr below ground level connected to 4mm thick GI wire by means of nuts,bolts,check nuts & washers of galvanized iron or steel,protected by 15mm bore light grade galvanised iron pipe and connected to main switch board,including all necessary excavation & earth work in hard dense soill including funnel with wire mesh and watering pipe 20 mm bore medium grade galvanised iron pipe with charcoal and common salt in alternate layers of 15 cm thickness all around the GI plate electrode with concrete pit in PCC 1:3:6 type C-1 with cast iron frame including cast iron cover10mm thick hinged to CI frame and 6mm MS rod for handle and necessary testing complete all as shown in electrical plate No 3 of SSR part-I all as specified and directed.(one earthing for each main Panel )

S & F sub main wiring with 2 run PVC insulated unsheathed FRLSH cable 1100 Volt grade, with multi stranded copper conductor drawing in existing Concealed conduit including one run PVC insulated unsheathed cable with multi stranded copper conductor as a earth continuity and connected upto DB of following sizes complete all as specified and directed. Note:Two run of single core PVC cable with one run of earth conductor & condiut shall be measured as one unit.

2 x 6 Sqmm + 1 x 6 sqmm

2 x 1.5 Sqmm + 1 x 1.5 sqmm

2 x 2..5 + 1x2.5 Sqmm

2 x.4.0 + 1x4.0 Sqmm

S and F sheet metal enclosure double door type ISI marked MCBs DB SPN(Single pole and neutral) 240V AC 4 way with 200 Amps rated bus bar all as specified and directed

Supplying, fixing & testing LED 10 Watt Wall mounted round Concealed light fitting, warm/ natural/ cool white as per requirement at site made of aluminium with electronic driver etc and all accessories pre wired including connecting to source complete all as specified & directed. Make PEARL ULTIMA of Crompton/INTEGRA HE of Havells/GreenPerform Sleek of Phillips as approved.

Supply and fix exhaust Fan ,made of sturdy Engineering plastic complete with louvers shutter,voltage 230volts ,50HZ,RPM 1200,copper winding of sweep 250mm including cutting holes on wall and making good the disturbed surface in cement mortar 1:4 including finishing the surface to match with the existing surface.

Supply and fix in repir Sheet metal enclosure for DB`s SPN, with 200amps rated bus br, 8 way, 240 volts double door Make Standard/HPL/Legrand, complete all as specified & as directed by Engineer- in -Charge.

Material and labour for earthing with galvanised steel earth plate electrode 60cmX60cmX 6mm thick burried directly in ground (earth pit not less than2.25 mtr below ground level) with top edge of the plate not less than 1.5 mtr below ground level connected to 4mm thick GI wire by means of nuts,bolts,check nuts & washers of galvanized iron or steel,protected by 15mm bore light grade galvanised iron pipe and connected to main switch board,including all necessary excavation & earth work in hard dense soill including funnel with wire mesh and watering pipe 20 mm bore medium grade galvanised iron pipe with charcoal and common salt in alternate layers of 15 cm thickness all around the GI plate electrode with concrete pit in PCC 1:3:6 type C-1 with cast iron frame including cast iron cover10mm thick hinged to CI frame and 6mm MS rod for handle and necessary testing complete all as shown in electrical plate No 3 of SSR part-I all as specified and directed.(one earthing for each main Panel )

Supply and fix electric water heater, storage type steel body with copper inner tank and heating element upto 2 KW capacity 25 litre, BEE 5 Star rated complete with all accessories such as safety valve, thermostate, NRV, connection piece etc. Marking MES No. with paint and kept in safe custody at site after compltion of bldg work.

Aggrawal Builders and Furnishers (BID ID -3474789)

M/S S P BUILDERS (BID ID -3475228)

ACE BUILDERS AND CONTRACTORS (BID ID -3475402)