WELCOME MAINTENANCE TO VARIOUS BLDGS AT ZONE A AND B RESIDENTIAL AREA UNDER GE I RND DELHI

Amount

Taking down cement plaster on brick walls, raking out joints hacking for key, scrubbing down with water etc complete all as specified and directed.

M&L rendering for 10mm thick cement plaster on brick/concrete surface in CM 1:4 finished even and smooth surface without using extra cement complete all as specified and directed.

M&L for rendering 15 mm thick in CM (1:6) on brick walls or concrete surface, surface finished even and smooth without using extra cement mixing with liquid WPC complete all as specified and directed. Note :- Water proofing compound shall be paid separately

M&L for rendering 5mm thick on concrete surfaces in cement mortar 1:3 finished on even and smooth without using extra cement as in ceiling, Chajja etc complete all as specified and directed.

Supply only Liquid Water proofing compound complete all as specified and directed.

M & L Preparation of newly plastered surfaces of walls and apply two coats of oil bound distemper over a coat of 2mm wall putty complete all as specified and directed.

M&L for applying two or more coats of 100% Premium acrylic emulsion paint with roller/spray having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including water based priming coat of exterior primer applied @ 0.90 litre/ 10sqm over surface complete all as specified and directed. Note:- (i) The application will be done by the specialist agency. MOU will be submitted by the contractor with the OEM. (ii) Rate also includes necessary scaffolding to carry out work upto a hight G+7 floor.

M&L for preparation of old surface and applying two or more coats of 100% Premium acrylic emulsion paint with roller/spray having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including water based priming coat of exterior primer applied @ 0.90 litre/ 10sqm over surface,applying putty wherever required complete all as specified and directed. Note:- (i) The application will be done by the specialist agency. MOU will be submitted by the contractor with the OEM. (ii) Rate also includes necessary scaffolding/Jhoola works to carry out work upto a hight G+7 floor.

M & L Preparation of newly plastered surfaces of Ceiling,chajja and applying three coats of white wash all as spd.

M&L for applying two coat of oil bound distemper on walls including preparation of old decorated surfaces including filling minor holes with wall care putty and including brooming down or steel wire brushing, scrabing down smoke soot, moulds, moss and efforescent salts and trading oil and greasy spots complete all as specified and directed.

M&L for applying one coat of oil bound distemper on walls including preparation of old decorated surfaces including filling minor holes with wall care putty and including brooming down or steel wire brushing, scrabing down smoke soot, moulds, moss and efforescent salts and trading oil and greasy spots complete all as specified and directed.

Description all as per item here-in-before but on ceiling

M&L for one coat of plastic emulsion paint on old painted walls/ceiling etc. including preparation of old decorated surfaces by brooming down or steel wire brushing, scrabing down smoke soot, moulds, moss and efforescent salts and trading oil and greasy spots complete all as specified and directed.

Complete removal of existing treatment from internal / external plastered or unplastered surfaces of walls complete all as specified and directed

M&L for 2mm thick layer(Each coat min 1mm thick) of white putty on scrapped/uneven surfaces of any description to match with the existing surfaces before application of white wash/distemper/cement base paint/Apex paint etc complete all as specified and directed.

M&L for applying two coat of oil bound distemper on walls after completion of putty work (if required on site) and including preparation of surfaces and including brooming down or steel wire brushing, scrabing down smoke soot, moulds, moss and efforescent salts and trading oil and greasy spots complete all as specified and directed. Note : Putty work shall be paid separtely in relivent items.

M&L for applying one coat of synthetic enamel paint over old painted wooden surfaces of any description over 10cm width or girth including preparation of old surfaces complete all as specified and directed.

M&L for applying one coat of synthetic enamel paint over old painted steel surfaces of any descripition over 10cm width or girth including preparation of old surfaces complete all as specified and directed.

M&L for applying two coats of French polishing on old surfaces of any description, width or girth including preparation of surfaces complete all as specified and directed.

M&L for easing door,window shutters of any size/any number of panels for easy closing/opening, tightening of hinges or changing the position of hinges adjustments of tower bolts, sliding bolts etc complete all as specified and directed.

S&F in repairs of 32mm dia PVC waste pipe fixed to WHB,sink,Urinal complete all as specified and directed.

S&F in repairs jet spray with tube for single symphonic EWC complete all as specified and directed.

S&F in repair health faucet (ABS Body) mild steel chromium plated suitable for 15mm dia pipe with 1.25mtr long flexible tube and ABS wall hook including making connections and fixed in position complete all as specified and directed.

S&F in repair angle valve 15mm dia cast copper alloy chromium plated fancy type quarter turn screwed both ends for iron pipe or for union complete all as specified and directed.

S&F in repairs Bib taps 15mm dia chromium plated fancy type with capstan head screwed down screwed for iron pipe or for brass ferrule complete all as specified and directed.

S&F in repair brass CP WHB mixer fancy type quarter turn for mixing hot & cold water screwed down for iron pipe and fixed complete all as specified and directed.

S & F in repairs Wall mixture chromium plated fancy type quarter turn continental telephonic wall mixer shower hot & cold, 15mm bore, bright finish with three joints screwed the ends for iron pipe and plugging complete all as specified and directed.

S&F in repair waste fitting CP Brass 40mm dia for sink,basin brass chromium plated. complete all as specified and directed.

S&F in rotational moulded polythene water storage tank (Cylindrical vertical with closed top ) hoisted including cover and fixed in position 500 ltrs capacity including dismantling old water tanks and removing away from site and disconnecting and refixing the GI pipe and fittings complete all as specified and directed.

S&F in rotational moulded polythene water storage tank (Cylindrical vertical with closed top ) hoisted including cover and fixed in position 1000 ltrs capacity including dismantling old water tanks and removing away from site and disconnecting and refixing the GI pipe and fittings complete all as specified and directed.

S&F in rotational moulded polythene water storage tank (Cylindrical vertical with closed top ) hoisted including cover and fixed in position 2000 ltrs capacity including dismantling old water tanks and removing away from site and disconnecting and refixing the GI pipe and fittings complete all as specified and directed.

Cleaning and removing all scale and dust from tanks of capacity 500 litres-2000Ltr and from mouth of circulating pipe etc including disconnecting water pipes, tanks if necessary and refixing the same after necessary cleaning and writing letters "TANKS CLEANED ON" and date in "DDMMYYYY" format in any tint, as per requirement not exceeding 7.5cm in height letters using synthetic enamel paint complete all as specified and directed.

S&F in repair 15 mm dia GI steel tubing medium grade galvanised with all fittings and fixed complete to walls and ceiling or laid in floors upto a height of G+7 including necessary steel/wooden scaffolding etc complete all as specified and directed.

S&F in repair GI steel tubing medium grade galvanised 20mm dia with all fittingsand fixed complete to walls and ceiling or laid in floors upto a height of G+7 including necessary steel/wooden scaffolding etc complete all as specified and directed.

Cutting chases, pinning in, making good to facings where required and pointing in CM(1:3) to ends or edges of landings, steps, cills,sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc., and making good, cutting not exc 10cm girth in brick walls complete all as specified and directed.

S&F in repair PVC valve less 10ltrs capacity syphonic action type flushing cistern low level white with inlet ball valve float and handle push type including flush pipe 32mm dia and connection to WC complete all as specified and as directed

S & F in repair of vitreous china squatting Pan “Orissa” Pattern, of size 580mm x 440mm white with integral foot rests (excluding flushing cistern and flush pipe) including provn of cement concrete bedding complete all as specified and directed.

S&F in repair Vitreous China wash down water closet pan (pedestal pattern), white colour (excluding fixing bolts, flushing cistern & flush pipe) incl Plastic water closet seat, white, closed pattern with flat bottom, & cover & mild steel CP or aluminised hinging device.

S&F in repair wash hand basins, white colour,vitreous china,of size 550x400mm (flat back, or angle back type) including cutting for and pinning in ends of brackets or erecting stand inclusive of waste pipe,waste coupling etc complete all as specified and directed.

M&L in repairs 75mm dia cast iron floor trap with grating including jointing to waste pipe fixed in cement concrete B-1, (1:2:4) complete all as specified and directed.

S&F in repair Toilet paper holder vitreous china box type fixed to wall with CP brass screw complete all as specified and directed.

S&F in repair plastic water closet seat white closed pattern with flat bottom cover and mild steel chromium plated or aluminized hinging device complete all as specified and directed.

S&F in repair CP grating 125 mm dia with or without hole for waste pipe fixed on floor / nahani trap fixed with cement mortar complete all as specified and directed.

S&F in repair Stainless steel sink, 1.00mm thick for kitchen or laboratory with plug waste pipe, washers including cantilever cast iron brackets connecting union etc. overall size 495mm x 420mm with bowl size 410mm x 330mm x 160mm complete all as specified and directed.

S&F in repair Stainless steel sink, 1.00mm thick for kitchen or laboratory with plug waste pipe, washers including cantilever cast iron brackets connecting union etc. overall size 915mm x 460mm with bowl size 410mm x 330mm x 160mm complete all as specified and directed.

S&F in repairs PVC connections 15mm dia & 600mm long with PTMT nuts complete all as specified and directed.

S&F in repairs chromium plated brass shower rose 125mm dia with swivel joint complete all as specified and directed.

S&F in repair kitchen plate rack of size 33" X 31" X 10" made out of 1mm thick stainless steel complete all as specified and directed.

M&L for white cement in traps/sides of 'P' or 'S' trap/joint of flush pipes and WC and making good complete all as specified and directed.

Taking down chowkhat or frames with shutters (without taking off shutters from the frame)n.exc 1.5sqm and making good to distrubed surface without any extra cost

Taking down chowkhat or frames with shutters (without taking off shutters from the frame)exc 1.5sqm but n.exc 4 Sqm and making good to distrubed surface without any extra cost

Taking down shutters exc 1.00 sqm but n.exc 2.00 Sqm each

M&L 2nd class hard wood plain solid straight chowkhats and frames wrought, framed rebated on the solid rounded or chamfered put together with glue pinned at joints complete all as specified and directed.

S & F pressed steel frames for doors with one or more rebates of size 125x60 mm including necessary fixing lugs, lock strike plate etc complete made out of 1.25 mm thick MS sheet complete all as specified and directed..

M&L Providing, cement concrete type B-0 1:2:4 (12.5mm graded stone aggregate for filling of Pressed steel frame etc, rounded or chamfered on edges complete as specified, supplied and fixed

S&F 35mm thick flush shutter solid core construction with block board core and ply wood face panels commercial type on both sides all as spd and directed

S&F 35mm thick factory made, 2nd class hard wood plain framed, panelled shutter (two panel) with lock rail and panel of 9mm BWP commercial ply or 12mm veneered particle board with commercial veneering on both faces. The size of rail and style as per IS-1003 (Part I) complete all as specified and directed.

S&F 35mm thick 2nd class hard wood glazed and skelton door shutter open rebated and prepare to receive glass, gauge etc (without sash bars) edges of framing palin, chamfered rounded fitted with cut and mitred beads for securing glass etc sizes of member as spd in SSR Part I sec 8 clause 8.20 (a) all as spd and directed

M&L for applying two coat of synthetic enamel paint over new wooden surfaces of any descripition over 10cm width or girth including preparation of surfaces complete all as specified and directed.

S & F factory made solid PVC door frame size 50mmx47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube as per spacification and drawing

S & F factory made solid Panel PVC door shutter 30mm the style consisting of frame made out of MS tube, for top & bottom rail, MS frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20mm width struck inside with solvent cement for stiles and plain colour PVC sheet for top rail, bottom rail & lock rail on either side & as gep insert for top rail and bottom rail. panelling of plain colour PVC sheet to be fitted in the MS frame welded/ sealed to the stiles and rails with suitable PVC sheet beading and joined together with solvent cement as per spacification and drawing.

S & F stainless steel butt hinges 100 mm long..

S&F 100mm butt hinges,extruded aluminium alloy with galvanised mild steel hinge pin, anodised and fixed,type B-21 complete all as specified and directed.

S&F 150 mm long aluminum anodized barrel tower bolt of extruded section complete all as specified and directed.

S&F 250mm long aluminum alloy anodized sliding door bolt with hasp & staple (bolt type) and fixing clips of sheet cast or extruded section and fixing bolts and sliding bolts of extruded section or cast aluminum alloy complete all as specified and directed.

S&F 150mm size aluminum handles cast type, anodized complete all as specified and directed.

S&F stainless steel wire mesh of size 0.36 mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples.

S&F in repairs stainless steel wire cloth 0.56 mm nominal dia of wire and average width of aperture 1.18 mm and fixed with stainless steel wire staple etc in wooden/steel frames complete all as specified and directed.

S&F in repair 4 mm thick sheet glass in squares/rectangle not exc 0.50 sqm in each pane fixed with wooden beads or putty (in metal/wooden frames etc)including hacking out old glasses upto a height of G+7 including necessary steel/wooden scaffolding etc complete all as specified and directed.

All as per ser item here-in-before but exc. 0.50 Sqm in each pane

S&F in repair 4 mm thick Figured glass, pin head type and glazing with oil putty in squares n exc 0.5 sq. m in each pane fixed with wooden beads or putty (in metal/wooden frames etc)including hacking out old glasses upto a height of G+7 including necessary steel/wooden scaffolding etc complete all as specified and directed.

S&F in repair 100 mm long aluminum anodized barrel tower bolt of extruded section complete all as specified and directed.

S&F in repair 200 mm long aluminum anodized barrel tower bolt of extruded section complete all as specified and directed.

S&F in repairs 100mm size butt hinges, medium weight cold rolled mild steel complete all as specified and directed.

S&F in repair Continuous (piano) hinges, mild steel, bright finish or electrogalvanised with width of flaps (When open) 30 mm

S&F in repairs continous (piano) hinges mild steel bright finish or electro galvanised width of flaps (when open) 40 mm all as spd and directed

Supply and fixing in repair Aral bihari hinges of standered size and screw complete all as specified and directed

S&F in repair 125mm extruded aluminium alloy handles, fabricated type, anodised

S&F in repair 150mm extruded aluminium alloy handles, fabricated type, anodised

S&F in repairs of brass CP tubular towel rail 20 mm dia 60cm long between flange with brackets etc complete all as specified and directed.

S&F in repairs towel ring chrome plated complete all as specified and directed.

S&F in repairs floor door stopper of aluminium alloy body and tongue anodised with drawn steel spring fixed to door with overall length of cover plate 140mm complete all as specified and directed.

M&L in repair 18/19mm thick Particle board, medium density, flat pressed,single layer type or three layer type with BWR type adhesive, fixed with screws to timber frame work for Kitchen cupboard/almirah including taking out old unserviceable board complete all as specified and directed.

S&F 18-19mm thick Medium density fibre board,exterior grade fixed with screws to timber frame work by taking out old unserviceable board from Kitchen cupboard/almiraha complete all as specified and directed.

S&F in repair 100mm size hasp and staple aluminium anodised, safety type with mild steel hinge pin incl bolt to hinge plate and fixed wiith screw complete all as specified and directed.

S&F in repair S/S brackets for curtain rod for 20mm dia curtain rod complete all as specified and directed.

S&F in repair 20mm dia MS CP curtain rods with fixing brackets, stops etc complete all as specified and directed

S&F in repair Powder Coated(minimum thickness of powder coating 50 micron) aluminium frame for doors,windows, ventilators with one or more rebates including joining cleat for fixing etc complete all as specified and directed.

S&F in repair Powder Coated(minimum thickness of powder coating 50 micron) aluminium window and ventilator shutters, fixed type without sash bar, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws etc complete all as specified and directed.

S&F in repair Powder Coated(minimum thickness of powder coating 50 micron)aluminium window and ventilator shutters(wire mesh shutter and glaze shutter), side hung type without sash bars, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips,rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150mm long (1 no.). hinges type B-21 100mm long (2 no.) suitable handle (1 no.) complete all as specified and directed.

S&F in repair aluminium powder coated(minimum thickness of powder coating 50 micron) sliding window 3- track, 2 glass panel and 1 mesh panel sliding window aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150mm long (1 no.). hinges type B-21 100mm long (2 no.) suitable handle (1 no.) complete all as specified and directed.

S&F Aluminium powder coated decogrill make DG 104 (10mm thick section) with frame of section not less than 0.136kg/Rm with F channel

S&F 5 mm thick sheet glass in squares/rectangle not exc 0.50 sqm in each pane fixed with wooden beads or putty (in metal/wooden frames etc)including rubber beading complete all as specified and directed.

Dismantling floor hearth or wall tiling including cement mortar bedding (but not backing) removing serviceable tiles to store and rubbish off the premises complete all as specified and directed.

M&L for light shade Vitrified Ceramic tiles 8-9mm thick (square/ rectangular)polished, area of each tiles not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match ,including spacers and epoxy fittings in joints where ever required complete all as specified and directed.

M&L for light shade Vitrified Ceramic tiles 8-9mm thick (square/ rectangular)polished, area of each tiles not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match, complete all as specified and as directed.

M&L 15mm thick Screed bed or bedding layer of cement mortar 15 mm thick for laying floor finishes in CM 1:6 complete all as specified and as directed.

M&L for light shade Vitrified Ceramic tiles 10 mm thick (square/ rectangular)polished, area of each tiles not exceeding 0.06 sqm,vertical surfaces as in skirting/dado etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 10mm thick cement mortar in CM 1:4 complete all as specified and as directed.

M&L for Coloured joint free Non Skid ceramic tiles 7 to 8mm thick (squares/rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including15mm thick screed in CM(1:6) complete all as specified and as directed.

M&L non skid ceramic coloured tiles 7 to 8 mm thick (square/ rectangular) polished, area of each tiles exc.0.06 sqm but not exceeding 0.11 sqm, in floors etc. set and jointed in neat cement slurry, over and including 15 mm thick in CM 1:6 and pointed in white or coloured cement to match

M&L for Glazed ceramic tiles in vertical surface 450 X 300 X 7mm thick set and jointed in neat cement slurry over and including 10 mm thick rendering in CM 1:4 and pointed in white or colour cement to match

M&L prepolished coloured chequred cement concrete tiles 300X300X25 mm size set in screed bed 20 mm thick in cement mortar 1:4 complete all as specified and directed.

Demolition of cement concrete (unreinforced) in Concrete of any description and in any position not otherwise specifically provided for complete all as specified and directed.

M&L for water proofing treatment to sunken slab complete all as specified and as directed in the following operations:- (a) Rendering 15mm thick in CM 1:4 mixed with water proofing compound @1% by weight of cement including the cost of water proofing compound (b) After drying of plastered surface suitable primer such as multipias primer/ multiplas / cold sticker/multiplas blow bitumer 85/25 or 90/15 shall be coated on the surface. (c) MULTIPLAS @ 3Kg/sqm shall be unrolled over the coated surface (with overlap of 10cm) and bonded completely to the primed surface. The overlap shall them sealed by the tourch flame. (d) Toping with PLASFAL @ 1.20Kg/Sqm on MULTIPLAS. Plasfal memberance shall then bonded on top of MULTIPLAS blown bitumen on 85/25 or 90/15 shall be applied @ 1.20 Kg/Sqm on top of plasfal. The above water proofing treatment shall be carried out by a specialised agency as approved by GE.

Plain cement concrete 1:5:10 mix, type E-2 (using 40mm graded aggregate) as in filling of sunken portion complete all as specified and directed.

M&L PCC 1:2:4 type B 0) using 12.5 mm graded stone aggregate mixing with WPC levelling course in floor etc complete all as specified and directed.

Dismantling stone slabs and tiles of any description or thickness in floors, aprons etc laid bedded and pointed in any mortar

M&L for machine cut kota stone slab flooring 20-25mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing completed. Including 20mm thick screed bed or bedding lay in CM 1:6.

M&L for machine cut kota stone slab flooring 20-25mm thick in staircase riser/thread/skirting dado etc laid over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing completed. Including 10mm thick screed bed or bedding lay in CM 1:4.

M&L for Granite stone 16-18mm thick (of any type) work (table rubbed and polished) in steps, jambs, pillars, window cills, cooking plateforms and like in cemen mortor (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite. Including 20mm thick screed bed or bedding lay in CM 1:6 complete all as specified and directed.

M&L for rubber moulded prepolished coloured precast concrete interlocking paver block 60mm thick of any shape and size with white cement and pigment confirming to IS 15658-2006 M-35 Grade, complete all as specified and directed.

M&L Sand filling/stone dust under floors or in foundations including watering and consolidation spreading and levelling in layers n exc. 25 cm thick

Rounding to edges of stone slabs one edge such as steps cooking platform and other similar situations complete all as specified and directed.

M&L for grinding polished the terrazo tile/kota stone flooring/marble stone flooring and wall complete including wax polished all as spd. Note standard size machine shall be used for griding floor and hand grinding machine be used for vertical surface ie dado/skirting etc complete all as specified and directed.

S&F in repair sand cast iron soil waste & vent pipes 75mm dia in any length with or without ears with cement joint fixed to wall complete all as specified and directed.

S&F in repair sand cast iron soil waste & vent pipes 100mm dia in any length with or without ears with cement joints fixed to wall all as spd & directed

S&F in repair sand cast iron soil waste & vent pipes 75mm dia in any length with or without ears with cement joints laid in trenches or in floor complete all as specified and directed.

S&F in repair sand cast iron soil waste & vent pipes 100mm dia in any length with or without ears with cement joints laid in trenches or in floor complete all as specified and directed.

S&F stack clamps out of 50 mm by 5 mm flat iron and 16mm dia round iron stays, including bolts and nuts and securing ends of stays to wall or roof for 75mm dia pipe complete all as specified and directed.

All as per item here-in-before but 100mm dia

Demolition of brick work or stone/boulder masonry built in cement mortar or cement lime mortar including all quoins, aches, pillars etc but excluding ashlar facing dressed stone work and precast concrete articles complete all as specified and directed.

M&L brick work with sub class B old size bricks straight or curved on plan exc 6 m mean radius built in cm (1:6) all as spd and directed

Dismantling wrought iron or mild steel work of any description not otherwise provided for.

S&F Rolled mild steel Joist, channel, angle, or tee sections, fixed independently, without connecting plates, etc. (cut to ordinary lenghts i.e. within 20mm of the length indicated) GDE Fe 410-0 W (Gde E-250) quality A

S&F Mild steel bands, straps, supports or stay, for rain water, ventilating pipes including bolts if reqd, hooks (stay) heavy for large gates hook and pintle large hasps and staple, chains hand made sliding bolts clamps, hold fasts wall ties etc etc hooks for hanging fans plain angle cleats for securing purlins to wood truss or rafter, knee piece inserts, two way and three way straps, plate washer and similar small articles confirming to Fe-410-0 or Fe-310-0 all as spd and directed

M&L preparation of new steel & iron surface of any description not otherwise described over 10cm width or girth and applying two coats of synthetic enamel paint over and including one coat of primer complete all as specified and directed.

Demolition of cement concrete in ground floors and pavings etc not exc 15 cm thick above or below ground level all as directed.

M/L Cement concrete type C2 1:3:6 (40mm graded aggregate) as in foundations, filling and mass concrete/Subbase

M&L 75mm thick PCC type C-2, (1:3:6) using 40mm graded stone aggregate as in plinth protection,subbase etc.

Demolition of reinforced cement concrete of any description and in any position not otherwise specifically provided for.

Material and labour for pre-cast reinforced cement concrete 1:2:4 type B-1 using 20mm graded stone aggregate in cover slabs,manhole cover and similar work including necessary form work complete all as specified and directed.

S & F Mild steel TMT bars 10 mm dia and over, cut to length, bent to shape required, including crancking, bending spirally for hooping for columns, hooking ends and binding with mild steel wire (annealed) not less than 0.90 mm dia or securing with clips complete as directed and specified.

Supply and fix mild steel round bars 10mm dia FE 410W Gde E-250 quality A or Fe 290 gde E-165 cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips for man hole cover handle.

Removing building materials etc.to a distance of upto 20 km, beyond the lead included in the rates, including loading, unloading and stacking at the destination

S&F in repair Welded steel wire fabric supplied and fixed complete to wood or steel members weight n.exc 4kg per sqm Note : Rate also includes for necessaryscaffolding /Jhoola work to carry out work upto a hight G+7 floor.

SAWARIYA ENGINEERS AND CONTRACTORS (BID ID -3404587)

KKP Enterprises (BID ID -3412824)