Loading…
Loading…
Tender Value
₹4.4 Cr
EMD Value
₹3.7 L
Closing Date
18 Feb 2026, 1:00 pmClosed
No
No
Single Packet System
Normal Tender
No
Not Applicable
Lowest to Highest
60 days
Expenditure
Capital (Works)
TENDER SEC
18 conditions · 5 needing a document upload
The tenderer must have minimum average annual contractual turnover of V/N or V whichever is less where V= Advertised value of the tender in crores of Rupees N= Number of years prescribed for completion of work for which bids have been invited. The average annual contractual turnover shall be calculated as an average of "total contractual payments" in the previous three financial years, as per the audited balance sheet. However, in case balance sheet of the previous year is yet to be prepared/ audited, the audited balance sheet of the fourth previous year shall be considered for calculating average annual contractual turnover. The tenderers shall submit requisite information as per Annexure-VIB, along with copies of Audited Balance Sheets duly certified by the Chartered Accountant/ Certificate from Chartered Accountant duly supported by Audited Balance Sheet.
No Technical and financial credentials are required for Tenders having value upto Rs.50 lakh.
For tenders having advertised value more than Rs. 20.00 crore wherein eligibility criteria includes bid capacity also, the tenderer will be qualified only if its available bid capacity is equal to or more than the total value of the present tender. As per the Advanced Correction slip No: 01 dt 14.07.2022 of GCC April-2022(CA certificate is required along with the tender. In case, the tenderer failed to submit the above certificate along with offer, his bid will be rejected summarily)
The balance sheet and all other financial document attested/certified by chartered accountant (CA) to substantiate fulfillment of financial eligibility criteria should be with UDIN, failing which the offered shall be considered as incomplete and will be summarily rejected without any further reference." [Ref . : CE/Works/HJP Letter no. ECR-HQOENGG. (Cont.)/0009/2025 dt. 18.11.2025]
Similar nature of work:- (A) For Civil component - Total - (Rs. 3,69,29,975.07 ) - "Building Works/Any work involving PCC/RCC." (B) For Electrical Component (Total Rs. 73,90,108.62 - "(i) Repair/Maintenance/Installation of centralized air cooling system.(ii) Repair/Maintenance/Installation of type AC Plant of capacity 15TR and above. (iii) AMC of centralized AC Plant of capacity 15 TR and above. Also Contractors Should have valid Electrical Contractor's license issued by any State/Central Govt licensing board for the required voltage level or above with their tender .Tenders without valid electrical contractor's license offer will summarily be rejected.Also refer S.no-12 of Technical- Compliance.
Technical Eligibility Criteria (Clause 10.1 of GCC-2022) In case of tenders for composite works (e.g., works involving more than one distinct component, such as Civil Engineering works, S&T works, Electrical works, OHE works etc. and in the case of major bridges substructure,superstructure etc.), tenderer must have successfully completed or substantially completed any one of the following categories of work(s) during last 07 (seven) years, ending last day of month previous to the one in which tender is invited: (i) Three similar works each costing not less than the amount equal to 30% of advertised value of each component of tender, or (ii) Two similar works each costing not less than the amount equal to 40% of advertised value of each component of tender, or (iii) One similar work each costing not less than the amount equal to 60% of advertised value of each component of tender. Note for b (1): Separate completed works of minimum required values shall also be considered for fulfillment of technical eligibility criteria for different components. (b) (2) In such cases, what constitutes a component in a composite work shall be clearly predefined with estimated tender cost of it, as part of the tender documents without any ambiguity. (b) (3) To evaluate the technical eligibility of tenderer, only components of work as stipulated in tender documents for evaluation of technical eligibility, shall be considered. The scope of work covered in other remaining components shall be either executed by tenderer himself if he has work experience as mentioned in clause 7 of the Standard General Conditions of Contractor through subcontractor fulfilling the requirements as per clause 7 of the Standard General Conditions of Contract or jointly i.e., partly himself and remaining through subcontractor, with prior approval of Chief Engineer in writing.However, if required in tender documents by way of Special Conditions, a formal agreement duly notarized, legally enforceable in the court of law,shall be executed by the main contractor with the subcontractor for the component(s) of work proposed to be executed by the subcontractor(s),and shall be submitted along with the offer for considering subletting of that scope of work towards fulfilment of technical eligibility.
The subcontractor shall have successfully completed at least one work similar to work proposed for subcontract, costing not less than 35% value of work to be subletted, in last 5 years, ending last day of month previous to the one in which tender isinvited through a works contract. Note: for subletting of work costing up to Rs.50 lakh, no previous work experience of subcontractor shall be asked for by the Railway. In case after award of contract or during execution of work it becomes necessary for contractor to change subcontractor, the same shall be done with subcontractor(s) fulfilling the requirements as per clause 7 of the Standard General Conditions of Contract, with prior approval of Chief Engineer in writing. Note for Item 10.1: (Clause 10.1 of part-1 GCC2022) Work experience certificate from private individual shall not be considered. However, in addition to work experience certificates issued 1.1.1 by any Govt. Organization, work experience certificate issued by Public listed company having average annual turnover of Rs 500 crore and above in last 3 financial years excluding the current financial year, listed on National Stock Exchange or Bombay Stock Exchange, incorporated/registered at least 5 years prior to the date of closing of tender, shall also be considered provided the work experience certificate has been issued by a person authorized by the Public listed company to issue such certificates. In case tenderer submits work experience certificate issued by public listed company, the tenderer shall also submit along with work experience certificate, the relevant copy of work order, bill of quantities, bill wise details of payment received duly certified by Chartered Accountant, TDS certificates for all payments received and copy of final/last bill paid by company in support of above work experience certificate.
60 conditions · 23 needing a document upload
List of completed works being submitted for fulfilment of eligibility criteria for similar nature of work must give description of work,, organization for whom executed, approximate value of contract at the time of award, date of award and date of scheduled completion of work, date of actual start, actual date of completion and final vaule of contract at the time of bill finalisation should also be given.
The tenderer whether sole proprietor / a company or a partnership firm / joint venture (JV) / registered society / registered trust / HUF etc if they want to act through agent or individual partner(s), should submit along with the tender, a copy of power of attorney duly stamped and authenticated by a Notary Public or by Magistrate in favour of the specific person whether he/they be partner(s) of the firm or any other person specifically authorizing him/them to submit the tender, sign the agreement, receive money, co-ordinate measurements through contractor's authorized engineer, witness measurements, sign measurement books, compromise, settle, relinquish any claim(s) preferred by the firm and sign "No Claim Certificate" and refer all or any disputes to arbitration.
The above power of attorney shall be submitted even if such specific person is authorized for above purposes through partnership deed / Memorandum of Understanding / Article of Association or such other document, failing which tender is liable to be rejected.
Documents to be Submitted Along with Tender (i) The tenderer shall clearly specify whether the tender is submitted on his own (Proprietary Firm) or on behalf of a Partnership Firm / Company / Joint Venture (JV) / Registered Society / Registered Trust / Hindu Undivided Family (HUF) / Limited Liability Partnership (LLP) etc. The tenderer(s) shall enclose the attested copies of the constitution of their concern, and copy of PAN Card along with their tender. Tender Documents in such cases are to be signed by such persons as may be legally competent to sign them on behalf of the firm, company, association, trust or society, as the case may be. (ii) Following documents shall be submitted by the tenderer:
Following documents shall be submitted by the tenderer in case of Sole Proprietorship Firm: (i) All documents in terms of Para 10 of the Tender Form (Second Sheet of GCC-2022).
Following documents shall be submitted by the tenderer in case of HUF: (i) A copy of notarized affidavit on Stamp Paper declaring that he who is submitting the tender on behalf of HUF is in the position of 'Karta' of Hindu Undivided Family (HUF) and he has the authority, power and consent given by other members to act on behalf of HUF. (ii) All other documents in terms of Para 10 of the Tender Form (Second Sheet of GCC- 2022).
Following documents shall be submitted by the tenderer in case of Company registered under Companies Act 2013: (i) The copies of MOA (Memorandum of Association) / AOA (Articles of Association) of the company (ii) A copy of Certificate of Incorporation (iii) A copy of Authorization/Power of Attorney issued by the Company (backed by the resolution of Board of Directors) in favour of the individual to sign the tender on behalf of the company and create liability against the company. (iv) All other documents in terms Para 10 of the Tender Form (Second Sheet of GCC-2022).
Following documents shall be submitted by the tenderer in case of LLP (Limited Liability Partnership): (i) A copy of LLP Agreement (ii) A copy of Certificate of Incorporation (iii) A copy of Power of Attorney/Authorization issued by the LLP in favour of the individual to sign the tender on behalf of the LLP and create liability against the LLP. (iv) An undertaking by all partners of the LLP that they are not blacklisted or debarred by Railways or any other Ministry / Department of the Govt. of India from participation in tenders / contracts as on the date of submission of bids, either in their individual capacity or in any firm/LLP or JV in which they were / are partners/members. Concealment / wrong information in regard to above shall make the contract liable for determination under Clause 62 of the Standard General Conditions of Contract. (v) All other documents in terms of Para 10 of the Tender Form (Second Sheet of GCC-2022).
The tenderer shall clearly specify that the tender is submitted on behalf of a partnership firm. The following documents shall be submitted by the partnership firm, with the tender: (i) A notarized copy of the Partnership Deed or a copy of the Partnership deed registered with the Registrar. (ii) A notarized or registered copy of Power of Attorney in favour of the individual to tender for the work, sign the agreement etc. and create liability against the firm. (iii) An undertaking by all partners of the partnership firm that they are not blacklisted or debarred by Railways or any other Ministry / Department of the Govt. of India from participation in tenders / contracts as on the date of submission of bids, either in their individual capacity or in any firm/LLP in which they were / are partners/members. Any Concealment / wrong information in regard to above shall make the bid ineligible or the contract shall be determined under Clause 62 of the Standard General Conditions of Contract. (iv) All other documents in terms of Para 10 of the Tender Form (Second Sheet of GCC-2022).
Following documents shall be submitted by the tenderer in case of Registered Society & Registered Trust (i) A copy of Certificate of Registration (ii) A copy of Memorandum of Association of Society/Trust Deed (iii) A copy of Power of Attorney in favour of the individual to sign the tender documents and create liability against the Society/Trust. (iv) A copy of Rules & Regulations of the Society (v) All other documents in terms of Para 10 of the Tender Form (Second Sheet of GCC-2022).
Please enter the percentage of local content in the material being offered. Please enter 0 for fully imported items, and 100 for fully indigenous items. The definition and calculation of local content shall be in accordance with the Make in India policy as incorporated in the tender conditions.
Letter of credit as mode of payment in works tenders or service tenders is available. It is an option for the contractor to take payment from Railways through a letter of credit (LC) arrangement. The details letter of credit as Annexure - A is available at document section.
Please submit bank details of the firm individual JV/partnership etc. i.e. name of the bank along with bank branch code, account number, IFSC code, PAN number and other necessary & relevant documents.
All tenders for both supplies and works (including all service and maintenance contracts) having estimate value of Rs.10.00 Lakhs and above, an option for supplier/contractor to take payment from railway through a letter of credit (LC) arrangement. As per instruction of Railway Board's letter No.2018/CE-1/CT/9 dt. 04.06.2018 and FA & CAO/G/ECR's vide his letter No.ECR/Fin/Exp/LC dated 16.05.2018, a format (Annexure-A) is attached herewith for documents.
The Railway reserves the right to verify all statements, information and documents submitted by the bidder in his tender offer, and the bidder shall, when so required by the Railway, make available all such information, evidence and documents as may be necessary for such verification. Any such verification or lack of such verification, by the Railway shall not relieve the bidder of its obligations or liabilities hereunder nor will it affect any rights of the Railway there under.
In case of any information submitted by tenderer is found to be false, forged or incorrect after the award of contract, the contract shall be terminated. Bid Security, Performance Guarantee and Security Deposit available with the railway shall be forfeited. In addition, other dues of the contractor, if any, under this contract shall be forfeited and agency shall be banned for doing business for a period of upto two years.
The following documents should be specified for submission along with tender:
List of Personnel, Organization available on hand and proposed to be engaged for the subject work.
List of plant Machinery available on hand own and proposed to be inducted own hired to be given separately for the subject work.
List of works on hand indicating description of work, contract value, and approximate value of balance work yet to be done and date of award.
All the documents (labelled mandatory) asked for uploading while e-tendering against the stipulations/conditions should be mandatorily complied. Non-submission of requisite document may lead to summarily rejection of offer/bid..
"The balance sheet and all other financial document attested/certified by chartered accountant (CA) to substantiate fulfillment of financial eligibility criteria should be with UDIN, failing which the offered shall be considered as incomplete and will be summarily rejected without any further reference." [Ref . : CE/Works/HJP Letter no. ECR-HQOENGG.(Cont.)/0009/2025 dt. 18.11.2025]
For those conditions for which standard formats have been given in the uploaded document titled-Formats for uploading of various format. The information should only be submitted in these standard formats.
Rates are inclusive of all taxes/octroi, license fee, royalty charges etc. legally leviable by State, Central Govt. and/or any other local authority.
In addition to General condition of contract 2022 and Indian Railways Unified standard specification Works Materials Volume I II 2010, revised upto date, special condition attached shall also apply.
Taxes as per GST (1st july2017), Royalty etc. will be recovered as per extant instruction on the subject.
Note for Commercial compliance :-
In case of items 3 and 11 of Commercial Compliance, supportive documents/certificates from the organizations with whom they worked/are working should be enclosed.
Certificates from private individuals for whom such works are executed being executed is not acceptable.
For Standard Financial criteria and Standard Technical criteria - Tenderers are required to submitted authenticated certificate along with the tenders from officers of government or semi- government/public sector undertakings under whom the work has been executed indicating there in the name of work executed, value of works/payment details and period during which completed. Such certificates should have signature and seal of the concerned officer. In the absence of such certificate the tender may not be considered.
BOOKS OF REFERENCE: These tender documents are to be read with the followings books with versions updated/corrected/modified up to the date of tender opening: 1) Standard General Conditions of Contract April 2022 as amended by updated correction slips termed GCC 2022. 2) Eastern Railway L&M Sch 87 as amended by updated correction slips. 3)E.C.Railway Engineering department unified standard schedule or rates 2021 as amended by updated correction slips (termed USSOR, 2021) up to the date of tender dropping. 4) Standard specifications contained in Indian Railways Hand Book Specifications (works and materials)2010. These four books are where-in-after called the "Books of reference" and shall govern this tender as well as the contract resulting from the acceptance from this tender, to the extent that these contents do not conflict with the contains of the various chapters of these documents.
Tenderer are advised to visit the site of work to ascertain all respect of the site condition viz accessibility, availability of approach road, nature of the soil, availability of material availably of labor etc. that may be encountered in course of execution of work.
Tenderer should see the website for the corrigendum/addendum to the NIT/tender document, if any that may be uploaded prior to tender opening (inclusive) as there will not be any separate communication for that.
The contractor shall observe all the formalities perform all the acts and abide by all the provision contained in the contract labour act-1970 and contract labor central rule , 1971 which in addition to other stipulations provided that the contractors shall obtained license from appropriate licensing officer of the area before commencement of the work and shall produced a copy thereof along with the original to the railway office, which will be returned to the contractor after variation.
If any complaint is received against the contractor regarding violation of contract laws( exposing principal employee to the risk of legal proceedings under labour laws), the guilty contractor will be black listed and their contract shall be terminated following the due procedure apart from initiating criminal proceeding against him with the help of labour department officials.(Authority : RB letter No. 2008/(LI)E/AT/CNR/3, dated: 24.01.2018)
It is responsibility of the tenderer to see corrigendum, if any, to tender notice up to the date of tender opening. IRSGCC-2022( Works Matter) uploaded for reference only. Any correction issued by competent authority up to date of opening will be applicable. Tender should quote accordingly.
Though no minimum eligibility criteria is specified for tender value upto Rs. 50 Lakhs, tenderers are advised to upload documents so their financial capacity, capability & past performance to execute the tendered work can be adjudged during evaluation of their offer. Documents testifying tenderer previous experiences for the type of job for which tender is invited with list of works carried out in the past and financial status should be produced along with the tender.
It is to be noted that tenderer digital signature on the E-tender form will be considered as confirmation that tenderer have read and accepted all the condition laid down in the documents as well as related specification of items, schedule & quantity of items in the tender, considering of techno-commercial offer form (including special condition attached to E-tender) and financial offer form, unless specific deviation is quoted in the techno- commercial offer form.
The tenderer has to submit necessary document in compliance of clause 10 to 18 (Part-II) of IRSGCC 2022(Works Matter) mandatorily, otherwise offer will be considered as incomplete offer and accordingly shall not be considered.
In reference to Sl No.2 above, any changes in rate of taxes or any new tax of cess on works contract will be dealt according to Clause 37 of IRSGCC-2022 Works Matter.
JOINT VENTURE will not be permitted for this tender.
Any conditional offer will be summarily rejected.
Provision of 40 bedded Running room at DKGS
SEE25-26-208
SEE25-26-208
Open
Works - General
12 Months
Saran, Bihar
₹0
₹3.7 L
18 Feb 2026
27 Jan 2026
4 Feb 2026
99 items across 3 schedules
| # | Description | Unit | Qty | Rate | Amount |
|---|---|---|---|---|---|
| — | — | — | 73,90,108.62 | ||
| — | 40.00 | — | — | ||
| Supply of Multi compressor (Rotary/Scroll) outdoor units with condenser unit, fan unit, piping, wiring, connections, control relay units, capacitors, insulated copper piping for condensed gas and liquid suction and delivery copper pipe lines (indoor to outdoor). Infrigerant gas pipe joints and multiooting joints,XLPE insulated copper power cables of suitable sizes for connection with the power panel etc suitable for reversible cycle operations (Heating & Cooling) and filtered fresh air handling/supply system including ducting etc as required for different air conditioners areas. Make LG, Daikin, Bluestar, Hitachi. Here qty. Unit Job stands for TR. | — | — | — | 16,00,880 | |
| — | 20.00 | — | — | ||
| "Supply of 2 Tr Hi-wall Indoor units suitable for reversible cycle operation. Make: LG, Daikin, Bluestar, Hitachi." | — | — | — | 6,04,460 | |
| — | 40.00 | — | — | ||
| Installation, testing and commissioning of Multi compressor (Rotary/Scroll) outdoor units with condenser unit, fan unit, piping, wiring, connections, control relay units, capacitors, insulated copper piping for condensed gas and liquid suction and delivery copper pipe lines (indoor to outdoor) infrigerant gas pipe joints and multiooting joints, XLPE insulated copper power cables of suitable sizes for connection with the power panel etc suitable for reversible cycle operations (Heating & Cooling) and filtered fresh air handling/ Supply system including ducting etc as required for different air conditioners areas. Make LG, Daikin, Bluestar, Hitachi. Here qty. Unit Job stands for TR. | — | — | — | 1,48,040 | |
| — | 20.00 | — | — | ||
| Installation, testing and commissioning of Hi-wall indoor units suitable for reversible cycle operation. Make LG, Daikin, Bluestar,Hitachi. | — | — | — | 37,000 | |
| — | 45.00 | — | — | ||
| "Supply and fixing of PVC drain pipe of 25 MM dia with 6 m m thick nitrile Rubber Insulation tube. Here qty. Unit RM stands for RMT. ." | — | — | — | 7,830 | |
| — | 45.00 | — | — | ||
| "Supply and fabrication of MS angle of suitable size for outdoor unit stand with red- oxide paint (2 layers) and enamelpaints (2 layers)." | — | — | — | 4,140 | |
| — | 45.00 | — | — | ||
| Supply, installation, testing and commissioning of power cable for electric supply to panel for indoor units & outdoor units (plant AC). Here qty. Unit RM stands for RMT | — | — | — | 15,795 | |
| — | 100.00 | — | — | ||
| Supply and installation of communication cable. Here qty. Unit RM stands for RMT | — | — | — | 15,700 | |
| — | 300.00 | — | — | ||
| Wiring of sub-main concealed in PVC heavy guage conduit pipe of size (O.D.) 20 mm make- Malhotra or similar ISI make Finolex, KEI or polycab with ECC 16 SWG/01 sqmm multi polycab with ECC 16 SWG/01 sqmm multi strand single core flexible copper earth wire. In case of ceiling/beam/column where cutting is not allowed/possible wiring to be done in open conduit/ casing capping by use of drill & roll plug. | — | — | — | 51,000 | |
| — | 20.00 | — | — | ||
| Supply, fixing, testing and commissioning of modular AC box with MCB with matching galvanized iron frame and polycarbonate cover plate accommodating 3 module (1x1x3M)suitable for 230, 50 Hz supply Make- Legrand, Havells, Crabtree, Wipro,Cona, Anchor, L&T or equivalent as per IS & IE rules. | — | — | — | 9,560 | |
| — | 2.00 | — | — | ||
| "Supply and fixing of 4-way TPN double door MCB DB with 4 pole isolator 80 Amp one no. And 32 Amp 12 Nos. MCB SP with sheet metal enclosed type steel cover with all accessories Make- Legrand, ABB, Siemens." | — | — | — | 12,814 | |
| — | 2.00 | — | — | ||
| Supply and erection of earthing station with GI pipe "B" class TATA/JINDAL/BANSAL of size 6 mts. Long 50 mm minimum dia and provided with alternate layer of charcoal and salt in the earth pipe around the GI pipe and suitable clamping arrangement including supply and connection with 6 SWG GI wire from earth pipe to panel board as per site requirement Bore dia of size 300 mm x 300 mm , digging will be done by auger. Minimum qty of each enhancement material to be supply is 50 Kg.per pit. Minimum qty of each enhancement material to be supply is 50 Kg per pit. | — | — | — | 8,364 | |
| — | 140.00 | — | — | ||
| Wiring for light point, call bell, fan point/exaust fan point and 5 A plug point in a concealed with a heavy gauge PVC conduit pipe confirming to IS 9537 (pt.3)/1983 or latest, ISI mark with single core 1.5 Sqmm copper FRLS wire (make - Anchor, Finolex, Havells, KEI, Polycab) complete with controlling modular switches and suitable board of Legrand, Siemens, L&T, Anchor, ABB, Havells, Crabtree make and 16 SWG tinned copper wire as ECC . | — | — | — | 71,120 | |
| — | 50.00 | — | — | ||
| Supply and fixing of 5 pin 5 Amp Modular switch & socket, L&T, Legrand , ABB, Havells, Anchor , Roma, C&S or similar ISI make approved by competent authority. Discription- 13nos.+Water filter-01 no+Telephone01 no.,cable TV socket 1no+Mobile charging 01 no.+chimny-1 no.) | — | — | — | 16,340.5 | |
| — | 30.00 | — | — | ||
| Supply and fixing of 16/20 Amp Modular switch & socket, L&T, Legrand , ABB, Havells, Anchor , Roma, C&S or similar ISI make approved by competent authority. | — | — | — | 9,240 | |
| — | 2.00 | — | — | ||
| Supply & fix Of 4 Standard/Havells/Bentec/C&S/Samko. | — | — | — | 9,748 | |
| — | — | — | cap. | ||
| — | — | — | Make | ||
| — | 250.00 | — | — | ||
| Wiring for submain along with earth wire with the size 2X2.5 sq.mm+1X2.5 sq.mm earth wire of PVC insulated copper conductor, single core cable in concealed/ surface/recessed PVC heavy gauge conduit as required. | — | — | — | 27,755 | |
| — | 150.00 | — | — | ||
| Wiring for submain along with earth wire with the size 2X4 sq.mm+1X4 sq.mm earth wire of PVC insulated copper conductor, single core cable in concealed/ surface/recessed PVC heavy gauge conduit as required. The work shall be done as per CPWD Pt.I, manual(1972) f o r general specification of electrical work. All materials should be IS marked. | — | — | — | 18,450 | |
| — | 100.00 | — | — | ||
| Wiring for submain along with earth wire with the size 2X6 sq.mm+1X6 sq.mm earth wire of PVC insulated copper conductor, single core cable in concealed/ surface/recessed PVC heavy gauge conduit as required. | — | — | — | 10,300 | |
| — | 6.00 | — | — | ||
| GI pipe earthing with 4.5 M long x40mm dia. With salt & charcoal .Make of GI pipe TATA/Jindal or equivalent superior make. | — | — | — | 10,602 | |
| — | 60.00 | — | — | ||
| "Supply &Laying of 6SWG GI wire as conductor earth electrode." | — | — | — | 720 | |
| — | 4.00 | — | — | ||
| Supply of 4 way MCB- D B . Make-ABB, L&T, Siemens, Schneider, Legrand, Havells, C&S. | — | — | — | 1,937.56 | |
| — | 16.00 | — | — | ||
| "Supply of MCB 6-32A. Make-ABB, L&T, Siemens, Schneider, Legrand, Havells, C&S." | — | — | — | 3,396.16 | |
| — | 4.00 | — | — | ||
| Fix. & comm. Of MCB- DB with MCB | — | — | — | 308 | |
| — | 640.00 | — | — | ||
| PVC insulated & sheathed arm. Al. conductor 1.1kV grade LT cable of SIZE 4 x 25 sq. mm | — | — | — | 1,18,400 | |
| — | 950.00 | — | — | ||
| PVC insulated & sheathed arm. Al. conductor 1.1kV grade LT cable of SIZE 4 x 95 sq. mm | — | — | — | 5,86,625 | |
| — | 950.00 | — | — | ||
| PVC insulated & sheathed arm. Al. conductor 1.1kV grade LT cable of SIZE 4 x 120 sq. mm | — | — | — | 4,93,126 | |
| — | 1590.00 | — | — | ||
| "Laying of LT cable direct in ground of size 25-120 sq.mm complete." | — | — | — | 1,89,210 | |
| — | 990.00 | — | — | ||
| HD D Machine for Horizontal boring of Railway across the Embankment /Road at a depth of 2.02 mtr. Below GL by contractor's own arrangement :- (450/300 mm dia hole) direction of site Engineer's incharge at site. | — | — | — | 22,33,440 | |
| — | 10.00 | — | — | ||
| Supply o f L E D 4 0 W environmental friendly, long life, corrosion resistant, impact proof, surface mounting IP65 luminaire with PC housing & opal finish cover suitable for wet location. Make:-Surya, Havells, C&S, Bajaj, Phillips. Warrenty 05 Years from the date of installation. | — | — | — | 32,650 | |
| — | 60.00 | — | — | ||
| "Fix.& comm. Of LED/LED street light fitting with tube" | — | — | — | 1,740 | |
| — | 50.00 | — | — | ||
| Fix. Of ceiling fan | — | — | — | 2,150 | |
| — | 10.00 | — | — | ||
| Installation, testing, fixing & commissioning of exhaust fan 300/380/450mm sweep in t h e existing opening including making t h e hole to suitable size f o r above fan, making good the damage with cement concrete including connection earthing the body complete etc. as required. | — | — | — | 1,708.9 | |
| — | 2.00 | — | — | ||
| Installation, testing & commissioning of water cooler up to 40 ltrs./hr. capacity including connection both electrically & waterly (water pipe connection ) earthing the body, carrying of water cooler from stores of concerning supervisor to site with supply &fixing of suitable G.I. pipe, bends, valve etc. and providing cement concrete foundation with supply of material including out let recessed drain complete etc. as required. as approved by site engineer in-charge. (Water cooler supplied by Rly.) | — | — | — | 1,106 | |
| — | 30.00 | — | — | ||
| Supply, fixing of Buifyss USB flexible reading LED light clip -on beside bed table desk lamp. Make of luminaire & Tube - Phillips,Bajaj,Surya, Havells .ABB. | — | — | — | 1,14,300 | |
| — | 3.00 | — | — | ||
| Supply, Installation , testing and commissioning of Geyser, vertical, stainless steel 25 lit. 1500W | — | — | — | 17,697 | |
| — | 3.00 | — | — | ||
| Geyser point with MCB connected of 6 pin 16Amp. power plug socket with 2X 2.5 Sq.mm FR PVC insulated copper conductor single core cable in concealed/surface/recessed PVC insulated copper conduit along 1 no.2.5 sq.mm FR PVC insulated copper conductor single core cable for loop earthing as required. | — | — | — | 2,342.7 | |
| — | 2.00 | — | — | ||
| Supply, Fixing, Testing and commissioning of LT cubical panel board of size 135x195x45 cm and thickness 2mm comprising of following 1) 4 pole 400 Amp capacity 415 volt AC MCCB-01 no. for Incoming make ABB GE Siemens, L&T, Hevells, Standard, 2) 4 pole 100 Amp capacity 415 volt AC MCCB-03 nos fot outgoing maks: ABB, GE, Siemens, LAT, Hevells, Standard, complete in all respect 3) voltmeter (0-500 volt) with selector switch Ammeter range 0-200 Amp grade with selector switch make Kaycee, AE with CT 400/5 of make KAPPA and copper busbar 400 Amp of requinte size as per panel size of 3 phase and neutral with other accessories complete in all respect. | — | — | — | 1,29,496 | |
| — | 10.00 | — | — | ||
| "Wiring for 3 pin 20 Amp. Plug point with 2x6 sq. mm. PVC insulated Copper conductor single core stranded cable in concealed/surface PVC heavy gauge conduit earthing with 1X6 sq.mm copper wire including supply & fixing of 3 pin, metal plug & socket outlet board 20 Amp SP & N controlled by single pole MCB 20 amp. capacity Make HPL cat No. DBSP20, Havells cat. No.DHDPUSN020, Standard, Siemens, Legrand or similar equivalent make including connection earthing the third pin etc. as required. The work shall be done as per CPWD Pt. I, manual(1972) for general specification of electrical work cable to be use of make KDK/ Finolex/Anchor/Polycab/ Havell's conforming to IS 694/97 of 1.1KV grade . Switch, JB, Ceiling rose etc. shall be of Anchor/ Kona/ Roma or equivalent superior make and fire retardant. JB/SB shall be with hylum sheet on top, Make of Conduit/ Casing Capping, Presto Plast / Malhotra/Harson/Plaza" | — | — | — | 12,089.4 | |
| — | 20.00 | — | — | ||
| Supply, delivery & Fixing of octagonal pole hot Dip Galvanized in single dip average 70 micron DFT, designed for maximum wind speed of 169KM/Hr.,BOP-7030 type pole of 6 m long, top dia 70mm, bottom dia. 130mm sheet thickness 3mm, in single section with Base plate (220x220x12)mm (LxBxT) with 4x20mm dia. 700mm long with 100mm projection foundation bolt complete with smart pack junction box with bakelite sheet, 6A MCB & stud terminals (for mounting inside base component of pole) and internal wiring for terminal to fitting with 2x2.5 sq.mm cable including single arm 1 mtr. long suitable for 3 to 10 mtr. pole of reputed make. Make - Bajaj, Transrail, Bansal, Jindal, Gammon Group. | — | — | — | 2,38,000 | |
| — | 20.00 | — | — | ||
| "Making of foundation suitable for 3 to 8 mtrs. octagonal pole as per site incharge/4'X4'X4'manufacturer dimension & as per site requirement." | — | — | — | 1,04,160 | |
| — | 50.00 | — | — | ||
| Supply, delivery & installation of (outdoor) 90 W LED street light luminaire made of pressure die cast aluminum housing LED street light luminaires with IP66, Make of luminaire & Tube- Philips,Surya, Bajaj, Crompton Greaves.Warrenty/Guarantee 05 Years from date of installation | — | — | — | 3,57,362.5 | |
| — | 10.00 | — | — | ||
| "Supply, making, fix.& commi. Of 32mm dia. X 2mtr. Long GI pipe for OD light fitting." | — | — | — | 3,600 | |
| — | 2.00 | — | — | ||
| Supply,installation, connection, testing and commissioning o f o n e n o . Double pole, Rating - 16-25 Amp. ELCB/RCCB on Concealed suitable size PVC board having top cover hylem sheet (thickness not less than 3mm) including supply of ELCB/RCCB, PVC board, hylem sheet, PVC cover cable (not less than 10 sq.mm) for connection with required material for installation and connection as per instruction of site incharge. Board make - Cany or similar approved by Sr.DEE/SEE, ELCB make - Havells, HPL, Legrand, L&T, Anchor. | — | — | — | 5,328 | |
| — | 30.00 | — | — | ||
| IInstallation, testing, commissioning and fixing of 3D LED based station name/Site Name boards on ALP sheet of 3mm gauge thickness with projected alphabets of made of acrylic sheet in size of standard height as per space of alphabets with LED chip modular light with Five years warranty. The work is including of erection of LED Board with minor modification. | — | — | — | 50,076.9 |
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
HTML
nit.pdf
NIT
Tender Document
ATTACHMENT
PolicyRBCE6dt.17.05.2004.pdf
ATTACHMENT
TelecomCircular9-2023.pdf
ATTACHMENT
B.G.SubmissionGuideline.pdf
ATTACHMENT
ApprovedTenderDocumentMerged-208.pdf
ATTACHMENT
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .