Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | 1₹3.4 LAccepted-AOC | 1 | Accepted-AOC 1 |
Tender Value
₹3.4 L
EMD Value
₹10,592
Closing Date
2 Dec 2024, 6:00 pmClosed
ASSISTANT ENGINEER
The Assistant Engineer, LSGD Section,Kareepra Grama Panchayat
102/25 Govt.Ayurveda hospital Yoga hall
2024_LSGD_693108_2
102/AE/lLSGD/KPA/24
Open Tender
Civil Works - Buildings
Item Rate
120 days
KAREEPRA
Please refer Tender documents.
6 documents required · 6 mandatory
₹885
Yes
₹10,592
Yes
8 Apr 2025
25 Nov 2024
4 Dec 2024
25 Nov 2024
2 Dec 2024
25 Nov 2024
Amount
ROOF WORK
4.1.3:Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level:1:2:4 (cement : 2 coarse sand (zone-III) : 4 graded stone aggregate 20 mm nominal size)
50.10.1:Steel work in built up G I tubular ( round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting,fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete
50.10.2:Steel work for purlin/single section with G I pipes including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete
OD65693/2024-2025:Roofing with GI Trafford profile sheet 0.35mm thick powder coated with over lap of 150mm at end and SS screws including plain washer and bitumen washers etc complete
OD65705/2024-2025:Supplying and fixing PVC square shape 150mm rain water gutter with 25x5mm clamps inccluding all charges complete
OD75193/2024-2025:Providing and fixing precoated galvanised steel sheet roofing accessories 0..35mm (+ 0.05%) total coated thickness, zinc coating 120 grams per sqm as per IS:mm(+0.05%) total coated thickness, Zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns using self drilling/self tapping screws complete:Ridges plain (500-600 mm)
50.6.2.2:Solid masonry using pre cast solid blocks (factory made) of size 30x20x15cm or nearest available size confirming to IS 2185 part I of 1979 for super structure up to floor two level with thickness 15cm in : CM 1:6 ( 1 cement : 6 coarse sand) etc complete
13.1.1:12 mm cement plaster of mix:1:4 ( 1 cement : 4 fine sand)
10.25.2:Item Shifted to Sub head 14 as item 14.73 Item Shifted to head 14 as item 14.74 Steel work welded in built up sections/framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required.In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works
11.37:Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thickness to be specified by the manufacturer), of 1st quality conforming to IS : 15622, of approved make, in colours such as White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick cement mortar 1:4 (1 Cement : 4 Coarse sand), including pointing the joints with white cement and matching pigment etc., complete.
13.43.1:Applying one coat of water thinnable cement primer of approved brand and manufacture on wall surface:Water thinnable cement primer
13.60.1:Wall painting with acrylic emulsion paint of approved brand and manufacture to give an even shade:Two or more coats on new work
Bidder Name
SANTHOSH KUMAR S
tech_eval.pdf
fin_eval.pdf
aoc.pdf
finance_1111953.pdf
boq_comp_chart.xlsx
xlsx
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .