Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Infra Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹39.4 LAccepted-AOC INDEX NO B 48 HQ CE SWC JAIPUR A 202 RATHRAM PANORAMA GALA GIMAKHANA ROAD NEAR AMMANJARI BUNGLOWS SOUTH BOPAL AHMEDABAD 380058 | AHMEDABAD | AHMEDABAD | GUJARAT | 380058 | L1 | Accepted-AOC L1 | |
| 2 | L2₹42.7 L+₹2.8 L (6.89%)Rejected-Finance C 347 ARBUDHA NAGAR ODHAV AHMEDABAD | AHMEDABAD | AHMEDABAD | GUJARAT | 382415 | L2 | Rejected-Finance OTHER THAN THE LOWEST BIDDER | |
| 3 | L3₹46.1 L+₹6.1 L (15.2%)Rejected-Finance SUBHASH CHOWK BARMER RAJSTHAN 344001 | BARMER | BARMER | RAJASTHAN | 344001 | L3 | Rejected-Finance OTHER THAN THE LOWEST BIDDER |
Tender Value
₹44.7 L
EMD Value
₹89,380
Closing Date
28 Mar 2024, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE (AF) Chiloda
GE (AF) Chiloda, Lekawada Patia, PO CRPF Campus, Gandhinagar (Gujarat)-382042
ADDN/ALTN TO BLDG NO. T-1 AND T-16 AT AF STATION WADSAR UNDER GE (AF) CHILODA
2024_MES_644887_1
8130/24-25/E8
Open Tender
Civil Works
Item Rate
180 days
WADSAR
AS PER NOTICE OF TENDER
7 documents required · 7 mandatory
₹500
Yes
GE (AF) Chiloda
₹89,380
Yes
6 Jun 2024
2 Mar 2024
30 Mar 2024
2 Mar 2024
28 Mar 2024
16 Mar 2024
2 Mar 2024 - 15 Mar 2024
Amount
Dismantling of floor hearth or wall tilling including cement mortar bedding and removal out side MD land complete all as specified and directed.
M&L 25 mm thick PCC 1:2:4 type B0 (12.5mm graded aggregate) as in levelling course complete all as specified and directed
M&L glazed ceramic coloured tiles 450x350mm x 7mm thick in vertical surface etc set and jointed in neat cement slurry and pointed in white or coloured cement to match including 10mm thick backing coat of CM 1:4, etc complete all as specified and directed.
M&L Vitrified ceramic (dark shade) tiles 10 mm thick (square / rectangular) polished, area of each tiles exc 0.18 sqm and n exc 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match, with screed bed 15mm thick in CM 1:4 complete all as specified and directed.
M&L for Endura tiles of size 300 mm x 300 mm x 10 mm thick light/dark shade in floor etc over 15mm thick cement screed in CM 1:4, set and jointed in neat cement slurry and pointed with white cement and pigment to match incl cutting, polishing complete all as specified and directed.
M&L Cement concrete chequred glossy finish tiles 30cmx30cmx25mm thick machine pressed as in floors and similar works over 15mm thick cement screed in CM 1:4, set and jointed in neat cement slurry and pointed with white cement and pigment to match incl cutting, polishing complete all as specified and directed.
M&L 40 mm thick, Cement concrete 1:2:4, type B0 (using 12.5 mm graded stone aggregate) as in floors including dividing strip complete all as specified and directed.
M&L Spike rolling to surfaces or making impressions of expanded metal, whilst the concrete is green complete all as specified and directed.
Taking down cement or cement lime plaster any description on brick or stone wall/ celling including raking out joint , haking for key scrubing with water etc complete all as specified and directed.
M&L for rendering 15 mm thick on fair faces of concrete or block masonary CM 1:6 finished even and smooth (without using extra cement) in internal surface of wall complete all as specified and directed.
M&L for rendering 15mm thick (10 mm thick CM 1:4 setting coat and 5mm thick CM 1:4), mixed with WPC @ 200 ml per bag of cement over external surface of wall including scaffolding complete all as specified and directed . Note:- WPC shall be measured and paid separately in revalent item of this schedule.
M&L 5 mm thick cement plaster in CM 1:3 on concrete surfaces of ceilings finished even and smooth without using extra cement complete all as specified and directed.
M&L for preparation of new plastered surface of wall and applying two coats of distemper oil emulsion over a coat of primer over a sufficent coat of Birla wall putty complete all as specified and directed.
M&L for complete removal of existing treatment of wall surface and applying two coat of distemper oil emulsion over a coat of primer over a sufficient coat of Birla wall putty in old surface of wall complete all as specified and directed.
M&L for preparation of new plastered surface of wall and applying two coats of weather proof 100% acrylic paint over a coat of primer complete all as specified and directed.
M&L for complete removal of existing treatment of wall surface and applying two coat of weather proof 100% acrylic paint over a coat of primer in old surface of wall and filling cracks with white cement etc complete all as specified and directed.
S&F galvanised steel wire, 0.91 mm dia and size of mesh 20mm complete all as specified and directed by Engr-in-Charge.
Taking out existing unserviceable plaster, loose unsound weaken cement concrete of any description and in any position from existing surface of RCC roof slab/ RCC facia/ beams/ columns/ RCC chajja, average depth 25mm (approximate 6.5 mtrs height from natural GL) with power driven pneumatic chiesel and removal of debries upto a distence 500 mtrs out side MD land including saw cutting of all edges, making square shoulders of cavaties and roughening of smooth surface, scraping out and removing corrosion and all loose scales, rust etc. from the visible reinforcement and cleaning the steel reinforecement properly providing NIT zink primer, Zink primer on visible reinforcement surface to form a contineous film and preparing the surface to recive concrete of epoxy grouting mortar etc. including providing necessary scaffolding complete all as specified and as directed.
M&L for applying bonding coat of modified styrene butadene emulsion in proportion 1 part (bonding agent) : 1 part (water) : 3 part (OP cement) by volume with the brushes etc. to bind new cement plaster/ polymer modified plaster/ concrete/ screed concrete with oldsurface including removal of loose/ distengrated old concrete/ plaster including preparation of surface etc. complete all as specified and as directed.
M&L for applying 25-35mm average thickness plaster on ceiling slab and chajja projections, facia and beams with polymer modified mortar firtified with SBR in proportion 1 part (cement) : 3 part (sand) by weight of cement with 11 to 15 ltrs water addition, finishing surface to match with existing adjoining surface complete all as specified and directed.
Taking up or down 15mm dia steel tubing and connection complete all as specified and directed.
Taking up or down 20 mm dia steel tubing and connection complete all as specified and directed.
S&F 16mm bore 3- layer PP-R (Polypropylene random copolymer) pipes SDR 7.4 & SDR 11 UV stablised and antimicrobial welded having thermal stability for hot & cold water supply including all PP-R plain & brass threaded polypropylene random fittings fixed complete to walls, ceilings or in floors etc. complete all as specified and directed.
All as per item No 23 here in before but 20mm dia pipe.
S&F in repair Fancy type CP bib taps 15 mm dia ,chromium plated cast copper alloy with half turn type apstan/crutch heads, screwed down screwed for iron pipe or for brass ferrule and fixed complete all as specified and directed.
S&F in repair Fancy type CP angular cock 15mm dia cast copper alloy, chromium plated fency type screwed down high pressure with half turn type Capstan/crutch heads, screwed both end for iron pipe or for unions and fixed complete all as specified and directed.
S&F in repair Fancy type CP stop valve 15mm dia cast copper alloy, chromium plated fency type with long shank and cup (concealed type) screwed down high pressure with half turn type capstan/crutch heads, screwed both end for iron pipe or for unions and fixed complete all as specified and directed
S&F in repair 75 mm dia outlet CI nahani trap plain with S/S grating including jointing with solvent cement complete all as specified and directed.
S&F in repairs Vitreous china wash basin with pedestal flat back size 550X400 mm white, excluding taps, waste ,chain and plug and chain porcelain stopper but including brackets cutting for and pinning in ends of brackets or erecting stand complete all as specified and directed.
S&F 15 mm dia pillar tapes Fency type of Chromoum Plated brass with half turn type capstan/crutch heads screwed down high pressure, with or without lettered hot and cold with long shank, screwed shanks and fly nuts, screwed for iron pipes or for WHB complete all as specified and directed.
S&F PVC waste pipe LDPE of 32 mm dia for sink complete all as specified and directed.
S&F in repair 125 mm dia Fancy type CP shower rose all as specified and as directed by Engineer-in-Charge complete all as specified and directed.
S&F waste coupling of 32/40mm dia brass CP for glazed ware sink basins, etc with long screwed shanks and fly nuts fanges end bedded in red lead cement and other end fixed complete all as specified and directed.
S&F PVC water connection 600 mm long to wash basin of 15mm dia including CP nuts and washers complete all as specified and directed.
S&F in repair Sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long complete all as specified and directed.
S&F for glass corner shelf 12 x 12 inch wall mount with 5mm thickness with SS railing complete all as specified and directed.
S&F in repairs vitreous china wash down water closet pan semi- pedestal pattern with trap front or back inlet including seat cover of any pattern and health faucet (ABS) with rubit cleaning system 1.25 m long, PVC flexible tube and ABS wall hook complete all as specified and directed.
S&F in repairs One piece vitreous china wash down coloured EWC with Cistern size 65x39x71 CM including with trap front or back inlet including custom made seat cover of any pattern and health faucet (ABS) with rubit cleaning system 1.25 m long, PVC flexible tube and ABS wall hook complete all as specified and directed. Make : Hindware model deimos CAT No - 92044 or equivalent make as approved by GE.
S&F in repair of low level flushing cystern 10 ltrs capacity body moulded from virgin quality high impact poly propoliyone and functional parts moulded from engneelicy grade ABS nylon and nylon glan complete incl brackets and 15mm bore 450mm long PVC connection complete all as specified and directed.
S&F in repair brass chromium plated tubular towel rail 20 mm dia 'D' type 60 cm long including brackets/flanges complete all as specified and directed.
Taking down eaves gutters and rainwater pipes (any size or pattern), including all fittings,heads, shoes, bends, swan-necks, etc., including cleaning or refixing or removal to Store (measured overall as fixed along the centre line over fittings and accessories complete all as specified and directed.
S&F 110mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or floors complete all as specified and directed.
S&F 110mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in fixed to walls complete all as specified and directed.
S&F 110mm bore PVC (SWR) bends any radius with access door complete all as specified and directed.
S&F 110mm bore PVC (SWR) junction single, (single T) equal or unequal any radius with acess door complete all as specified and directed.
S&F 110mm bore PVC (SWR) junction double, (double T) equal or unequal any radius with access door complete all as specified and directed.
S&F 110mm bore PVC (SWR) cowl any radius complete all as specified and directed.
S&F 75 mm dia PVC (SWR) floor trap, plain with grating incl jointing with solvent cement complete all as specified and directed.
S&F PVC (SWR) gully trap 125/110 mm, setting and jointing with solvent cement complete all as specified and directed.
S&F in repair rotational moulded polyethylene water storage tank of 750 ltrs capacity (cylindrical verftical with closed top) hoisted and fixed in position including Dismantling of water tanks of exc 500 ltrs and not exc 1000 ltrs in capacity complete all as specified and directed.
Taking down chowkats or frame exc 1.5 Sqm and not exc 4.0 Sqm each (without taking off shutter from the frame) complete all as specified and directed.
Taking down chowkats or frame not exc 1.5 Sqm each (without taking off shutter from the frame) complete all as specified and directed.
Taking down shutters of any description not exc 1 sqm each complete all as specified and directed.
M&L for 32 mm thick flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides, kiln seasoned and chemically pressed treated complete all as specified and directed.
M&L for 35mm thick 2nd class hardwood glazed and skeleton shutter open rebeted and prepared to receive glass gauze etc (without shash bar ) edges of framing plain chamfered or rounded filled with cut and mitered beads for securing, glass etc size of member of shutter as per specified in SSR Part-I section 8,clause 8.24(a) supplyed and fitted to chowkats complete all as specified and directed.
S&F stainless steel wire cloth 0.36mm nominal dia wire and average width of aperture 1.14mm and fixed with stainless steel wire staples complete all as specified and directed.
S&F for aluminium ventilator, louvers type, frame top & bottom of size 31x42x1.60mm (section No 20558) rectangular tub of size 40x20x2mm (section No 14019 and middle vertical of size 42x46.20x1.60mm Section (20560) and clip for fixing wire mesh and glass of size 19x17.30x0.90mm (section No 19360) thick including stainless steel wire cloth 0.36mm nomonal dia of wire and 1.40mm average width of aperture and fixed with stainless steel wire staples and supply and fixing 5mm thick forsted/pinheaded glass louvers with blades of 100mm heavy duty with necessary rubber beading, gasket etc complete all as specified and directed.
M&L Aluminium powder coated (powder coated of requried colour) three track sliding windows frame top & sides of size 92x31.75x1.50mm , bottom size 92x31.75x1.50mm and shutter top & bottom of size 40x18x1.55mm and sides (handle) of size 40x18x1.55mm and lock side shutter frame of size 40x18x1.45mm " with rubber gasket, beading and locking arrangement including making good to the disturbed portion complete including stainless steel wire mesh 0.36mm nominal dia of wire with 1.40mm average aperture and fixed with stainless steel wire staples and fixing 5mm thick glass with necessary rubber beading gasket etc complete all as specified and directed by Engr-in-charge.
M&L Aluminium powder coated (powder coated of requried colour) windows shutter top, bottom and sides of size 40x18x1.55mm with stainless steel wire mesh 0.36mm nominal dia of wire with 1.40mm average aperture and fixed with stainless steel wire staples etc complete all as specified and directed by Engr-in-charge.
M & L for Aluminium doors, powder coated (of approved colour), with frame of section 100 x 44mm x 2.5mm thick and shutter with bottom rail of section 150 x 44.5 x 2.5mm thick, middle rail of section 85 x 44.5 x 2.5mm thick and top rail of section 80.4 x 44.5 x 2.5mm thick and styles of section 80.4 x 44.5 x 2.5mm thick with 5mm thick glass (plain/tinted/with laminated film) or prelaminated board fixed in position with aluminium beading including necessary rubber gaskets and 2 Nos. aluminium push plate handle of aluminium section 150mm wide and 2.5mm thick including 150mm aluminium tower bolt, brass mortice lock complete all as per Drawing No. CEAA/TD/63 sheet No. 2.2 complete all as specified and directed.
S&F aluminium powder coated (requried colour to match window colour) grill of 5.00 mm dia squares rectangular triangular circular shape aperture n.exc 5.00cm in length or width fixed with H or F channel complete all as specified and directed.
S&F Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, suppling & fixing in opening as per specification & drawing complete all as specified and directed.
S&F Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing complete all as specified and directed.
S&F Collapsible steel gates, top hung, consisting of pickets, pivoted flat bars, top and bottom runners, brass handles etc., as specified, erected in position and securing runners with holdfasts and brackets, complete all as specified and directed.
S&F 25mm thick Ist class HW, glazed and skelton shutters open rebated and prepared to receive glass / gauge (without sash bar) edges of forming plain chamfered orrounded fitted with cut and mitred bead for securing glass / gauge etc size of shutter as per SSR part-1 section 8 clause 8.24(b) as in windows complete all as specified and directed.
S&F 4mm thick sheet glass ordinary quality and glazing complete in square not exc 0.50 sqm each complete all as specified and directed.
S&F 75mm long SS butt hinges and fixed to frame with scrwewd or welding complete all as specified and directed.
M&L Preparation of new wooden surfaces over 10cm width or girth, not otherwise described and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed.
M&L Preparation of old wooden surfaces over 10cm width or girth, not otherwise described and applying one coat of synthetic enamel paint complete all as specified and directed.
M&L for preparation of new steel surfaces of any description, not exc 10 cm width or girth, not otherwise described and applying two coats of synthetic enamel paint over a coat of primer complete all as specified and directed.
M&L for preparation of old steel surfaces of any description, not exc 10 cm width or girth, not otherwise described and applying one coat of synthetic enamel paint complete all as specified and directed.
S&F for 100mm long butt hinges, medium weight, cold rolled mild steel and fixed complete all as specified and directed.
S&F for 200mm long aluminium anodized barrel tower bolts of extruded section and fixed complete all as specified and directed.
S&F aluminium alloy anodized sliding door bolt with haps and staple (bolt type) and fixing clip of sheet cast or extruted section or cast aluminium alloy and fixed length of bolt 300mm complete all as specified and directed.
S&F for 150mm long aluminium handle cast type anodized complete all as specified and directed by Engineer-in-Charge.
S&F 150mm long Floor door stopper of brass body and tongue, with hard drawn steel spring, fixed to bottom of door shutter complete all as specified and directed.
S&F 28 mm dia aluminium powder coated drapery rod including socket and bracket complete all as specified and directed.
M&L Pre- painted Galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550Mpa as in roof covering fixed with self tapping screws including taking down old ones as specified and as directed by Engineer-in-Charge.
M&L Pre- painted Galvalume aluminium zinc coating GI based plain steel sheet 0.50mm thick of an colour having tensile strength of 550Mpa as in roof covering fixed with self tapping screws including taking down old ones as speified and as directed by Engineer-in-Charge.
S&F in repair false ceiling of 600x600x15 mm mineral fibre ceiling tiles RH-99 of type micro looks edge laid on super fine XL 15mm exposed grid systems with 15mm wide T- section flanges. The frame work comprises of main runner of size 15x32x3000 mm spaced at 1200 mm centre securing fixed to the structural soffits by approved hangers at 1200mm maximum centers. Hangers (GI wire of 3.0mm dia) to be fixed by approved roof plug, level adjusters and screws etc. The last hanger at the end of each main runner should not be greater than 450mm from the adjacent wall flush fitting 1200mm long cross tees of size 15x26x1200 mm to be interloched between main runners at 600mm centers to form a 1200mm x 600 mm module. Cut cross tees longer than that 600mm to be supported independently. 600 mm x 600 mm modules to be formed by fitting 600mm long flush fitting cross tees of size 15x26x600 mm centrally between the 1200mm crosstees perimeter wall angle of size 19x19x3000 mm secured to wall at 450mm maximum centres. Finally RH-99 mineral fibre tile 15mm thick micro look edge has to be laid on the 600mm x 600mm module complete all as specified and directed.
Demolition of Concrete (unreinforced) of any description and in any position not otherwise specifically provided in cement concrete complete all as specified and directed.
M&L for providing 75 mm thick cement concrete 1:4:8 type D-2 (using 40mm graded aggregate) as insub base complete all as specified and directed.
M&L 50mm thick, PCC 1:3:6, type C-2 using 40mm graded stone agg finished even and smooth without using extra cement as in flooring / plinth protection complete all as specified and directed.
Providing & fixing aluminium Composite panel of any colours 3mm thick exterior grade PVDF with foil thick of 0.25mm & frame work made out from aluminium section of size 38x25mm supported on masonary/RCC with the help of MS Bracket fixed with brick fastener/ Anchor fastner and groove filled with 789 weather sillent of DOW corning etc. complete all as specified and directed by Engr-in-charge.
Demolition of brick work or stone/boulder masonry, built in cement mortar or cement lime mortar incl aii quoins, arches, pillars, etc., but excluding ashlar facings, dressed stonework and precast concrete articles complete all as specified and directed.
M&L for brick work sub class B bricks, straight or curved on plan exc 6m mean radius built in CM 1:6 complete all as specified and directed.
S&F 52mm thick PVC Partition consisting of 12mm thick both side printed solid PVC plastic ply sheet and 5mm thick printed heat moulded C channel reinforced with frame work made from 40mm x 20mm MS tubes. In between two MS tubes, 5mm thick Plain heat moulded 'C channel of size 75mmx50mm with feathered edges shall be fixed on the floor, wall and ceiling. Plastic ply opanel shall be inserted in the PVC 'C channel. The first & last MS tube should be errected such that it is inside a PVC 'C channel, in between adjoining plastic panel, 5mm thick x75mm width plain PVC sheet feathered at edges shall be stick on the front & back face using solvent cement complete all as specified and directed.
Dismantling boarding any description fixed in any position with nails complete all as specified and directed.
M&L for 6mm thick Cover fillets of standard hard board, 150mm wide, and fixing with screws complete all as specified and directed.
M&L for complete removal of existing unserviceable water proofing treatment from top of roof and canopies/chajjas of building including removal of debris out side MD land complete all as specified and directed.
Demolition of cement concrete (un-reinforced) of any description (including plastering,leeping etc) in any position not otherwise specifically provided for n.exc 15 cm thick complete all as specified and directed.
M&L for providing cement concrete type B-0, 1:2:4 using 12.50mm graded aggregate laid to slope 1:30 in padding for WPT over roof slab complete all as specified and directed by Engineer-in-Charge.
M&L for rendering 10mm thick in CM 1:4, mixed with WPC @200 ml per bag of cement on fair faces of concrete surfaces without using extra cement as in roof complete all as specified and directed. Note:- WPC shall be measured & paid separately.
M&L for preparing clean and dried plastered surface and applying a coat of oil based bitumen primer conforming to IS 3384-1986 @ 0.30 litrs/sqm and then laying APP polymer modified membrane, 3mm thick with non woven polyster reinforced membrane (3.50 kg/sqm) having thermal insulation with white mineral gravel finish on upper side of membrane and laid by torch application method to the entire surface complete all as specified and directed by Engineer in Charge.
Supply only Liquid waterproofing compound complete all as specified and directed.
S&F sinks made of stainless steel 1 mm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe, overall size 495mm x 420mm bowl size 410mm x 330mm x 160mm complete all as specified and directed.
S&F in repair CP center hole wash basin mixer cast copper alloy suitable for iron pipe 15mm bore complete all as specified and directed. Make : L & K code 0427-A or equivalent as approved by GE.
S&F Bottle trap of 32 mm dia PTMT having minimum water seal of 25mm (Minimum weight 32mm-260gms/ 40mm-270 gms) complete all as specified and directed.
Dismantling Stone slabs and tiles of any description or thickness in floors, aprons etc.laid and bedded on pointed on any mortar complete all as specified and directed.
M&L for black granite work 18 to 20mm thick (table rubbed and polished) in steps, jambs, pillars, windowcills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with marble shade of following types inculding screed bedding layer of 15 mm thick in CM 1:4 for laying floor finshes complete all as specified and directed.
S&F PVC kitchen cabinets made with door frame of size 48x40mm (Section code RUPS-414), shutter frame 45x300 (section code DWUF-501) and 20mm thick shutter (section code SPUF-128 or SPUF-129) and kitchen rack to modular racks where required including 75mm size Stainless steel butt hinges complete all as specified and as directed by Engineer-in-Charge.
S&F CP decorative type SS handles 75mm long fixed to PVC sheet or frame complete all as specified and directed by Engineer-in-Charge.
S&F magnetic and connected plate to shutter and frame as per sample complete all as specified and directed.
Excavation in post holes (or similar holes) each not exceeding 0.5 cum getting out returning filling in and ramming earth or broken rubble mixed with earth around in layers not exceeding 25 cm watering and removing surplus soil to a distance not exceeding 50 m and making good surfaces in soft/loose soil complete all as specified and directed.
M&L Cement concrete 1:2:4 type B2 using 40 mm graded stone aggregate as in walls or retaining walls, any thickness, size or shape including pilasters, buttresses columns, pillars, boundary pillars and posts (including caps and bases) complete all as specified and directed.
S&F for MS framed works as in purline, rafters, column square/rectangular, round or angle section, fixed with and including iron cleats or other connected plates flate iron wind ties etc incl bending of MS section as requried such as grills,gratings, etc. with ends of barsshouldered and/or riveted,or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work con- forming to Fe.290 Gde-E-165 complete all as specified and as directed.
M&L framed work as in doors or gates of angle or other section with gusset plates, braces etc complete drilled for fixing of steel sheeting or other covering. Doors to be prepared for hangidng or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging also fastening and fixing complete conforming to Fe 410-w (Gde-E-250 quality) complete all as specified and as directed.
S&F Expanded metal (weight n exc 4 kg per sqm), cut to length, bent to shape required and tying with and incl annealed mild steel wire not less than 0.9mm dia or fixing with galvanised steel staples complete to wood or steel members complete all as specified and as directed.
S&F Chain link fencing 4 mm dia MS galvanised 100x100 mm mesh size and type to any of standards rails straining bolts etc incl provision of binding wire. including strengthening and fixing to fencing post complete all as specified and as directed.
Excavating in trenches not exc 1.5m wide and not exc 1.5m in depth for foundations etc or for shafts, wells, cesspits, manholes, pier holes etc not exc 10sqm on plan and getting out in soil complete all as specified and as directed.
All as per item No 111 here in before but exc 1.5m and not exc 3.00 m complete all as specified and as directed.
Returning, filling in, including spreading, levelling, watering and well ramming in layers not exceeding 25 cm in soft/ integrated rocks/ soil. etc complete all as specified and directed.
M&L for Reinforced cement concrete (nominal mix) Type B1 1:2:4 (20 mm graded aggregate) in Foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc.; basement slabs, under-reamed piles and mass concrete complete all as specified and directed.
M&L for precast cement concrete Type B1 1:2:4 (20mm graded aggregate) set in cement mortar 1:4 in landings, cover slabs (for man holes etc.) chullah hoods, chajjas, water troughs, mangers, shelves and similar articles with plain faces complete all as specified and directed.
M&L for brick work with fly ash bricks straight or curved on plan n exc 6m mean radius, built in cement mortar 1:3 for soak well etc. complete all as specified and directed.
M&L for mild steel TMT bars 10mm dia and over cut to length, bend to shape required, including cranking bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips quality conforming to TMT bars complete all as specified and directed.
M&L for Rendering 10mm thick on fair faces of brick work or concrete surfaces even and smooth without using exrtra cement in CM-1:4 complete all as specified and directed.
M&L reinforced cement concrte 150mm dia pipes, class NP2, laid and jointed complete with collars complete all as specified and directed.
M&L cement concrete 1:3:6 bed to drain pipes of 150 mm bore including packing under and haunching against the side of pipe after they are laid tested complete all as specified and directed.
Removing excavated material n exc. 50 m and depositing where directed at a level n exc. 1.5 m above the starting point complete all as specified and directed.
M&L for cutting into existing manholes for connecting new drains, making good to pipe and rendering, cutting out existing benching for and forming branch channel (1/2 round or 3/4 section) in cement concrete 1:2:4 type B-1 smooth finished, and reforming benching as required for 150 mm bore pipe complete all as specified and as directed.
M&L for 60 mm thick machine pressed precast concrete interlocking paver block (glossy finish) of M-35 Gde of approved shape, size & colour confirming to IS 15658-2006 and laid over 30 mm thick sand cushion complete all as specified and as directed. (Note : Sand cusion measured and paid separately).
M&L for 30 mm thick sand cushioning for filling under interlocking tiles and sand for cable cushioning including gentally punning down complete all as specified and as directed.
M & L for concealed point wiring complete with FRLS PVC insulated /unsheathed stranded copper conductor of wire 1.5 Sqmm, 1100 volt grade , alongwith one single core of same size stranded copper as continuous earth wire to common earth dolly in and including PVC conduit pipe fitting medium grade of 25 mm dia fixed in concealed surface of wall/ceilling/false ceilling including cutting /chasing in wall as required with powder coated sheet metal terminal boxes modular type of required sizes and thickness (factory made) sunk in wall where as required and accessories complete incl taking down old point wiring complete all as specified and directed, suitable for the One light/fan point controlled by one on way switch
All as per item No 125 here in before but One socket outlet 05 Amps on the same board
All as per item No 125 here in before but One socket outlet 05 Amps on independent board
All as per item No 125 here in before but One bell point
All as per item No 125 here in before but point wiring with 2.5 Sqmm cable and 2.5 Sqmm earth continuity conductor for 3 pin 15 Amp socket complete all as specified and directed.
S & F in replacement modular switch, one way, 6 Amps, 1 module, ISI marked complete all as specified and directed.
S & F in replacement modular socket, 6 Amps - 2/ 3 pin combined 2 module, ISI marked complete all as specified and directed.
S & F in replacement modular socket, 6/ 16 Amps - 2/ 3 pin combined 2 module, ISI marked complete all as specified and directed.
S & F in replacement modular switch, one way, 16/ 20 Amps, 1 module, ISI marked complete all as specified and directed.
S & F in replacement modular bell push, 6 Amps, 1 module, ISI marked complete all as specified and directed.
S & F in replacement modular fan step regulator, 120 W - 1 module, ISI marked complete all as specified and directed.
S & F in replacement modular white cover plate with frame, 1 module, ISI marked complete all as specified and directed.
S & F in replacement modular white cover plate with frame, 4 module, ISI marked complete all as specified and directed.
S & F in replacement modular white cover plate with frame, 8 module, ISI marked complete all as specified and directed.
S& F ceiling rose, 5 Amps surface type 240 volts bakelite three terminal complete all as specified and directed.
S&F in replacement 8 way sheet metal enclosures for flush/surface mounting distribution board double door, 240 volts factory made and tested complete, suitable for mounting MCBs with 200 Amps rated bus bar, cable lugs complete all as specified and directed.
All as per item No 140 here in before but 4 way 415 volts TPN DB.
Supply and fixing 5-32 amp SP 240V, 10KA 'C' curve miniature circuit breaker (MCB) complete with connection testing and commissioning complete all as specified and directed.
Supply and fixing 40-63 amp SPN 240V, 10KA 'C' curve miniature circuit breaker (MCB) complete with connection testing and commissioning complete all as specified and directed.
Supply and fixing 415V 10KA 'C' curve miniature circuit breaker (MCB) of following poles and current carrying capacity in the DB complete TPN 40 to 100 AMP capacity of 'C' Curve with connection testing and commissioning complete all as specified and directed.
Supply and laying or fixing XLPE insulated screened PVC bedded, galvanized steel strip or wire armoured electric power cable (H/D) earthed cable aluminium conductor, 1100 volts grade with standed complete all as specified and directed for 70 sq. mm, 4.0 core nominal cross section in service connections complete all as specified and as directed.
M & L taking down carefully by unscrewing from boards/outlet boxes, fittings and fixtures such as switches, sockets, ceiling roses, lamp holders, brackets, ceiling fittings, bulk head fittings, tube light fittings and regulators, etc. for reuse at site or carrying to the store (To be measured only when found serviceable in all respects complete for reuse) including refixing the same after complete the work all as specified and directed.
M&L including taking down for concealed sub main wiring of two run with 04 Sqmm single core PVC insulated, FRLS, flexible multi stranded copper conductor cable 1100 volts grade, drawn through and in existing conduit pipe including one run of 4.0 Sqmm single core PVC insulated, FRLS , flexible copper cable as earth continuity conductor in green colour complete all as specified and as directed. Note- (a) Two runs of single core cable with one run of earth continuity cable will be measured and paid as one unit. (b) Make disturbed surface good to wall/floors .
All as per item No 147 here in before but with 6 sqmm complete all as specified and directed.
All as per item No 147 here in before but with 4x6.0 sq. mm + 2x6.0 sq. mm earth wire complete all as specified and directed.
Supply and fix exhaust fan made of sturdy Engineering plastic complete with louvers shutter, voltage 230V, 50 Hz, RPM 1200, Copper winding of sweep 300m complete all as specified and directed.
M&L for earthing complete with galvanised steel earth plate electrode 60 x 60cm x 6.3mm burried directly in ground level with teop edge of earth plate at a depth not less than 1.5m below ground level connected to and including galvanised iron strip 25 x 6mm as earthing lead by means of bolts, nuts, check nuts and washers etc made of GI and connected to earthing test point all as shown in electric plate No.3 of SSR indicated and testing on completion including excavation and earth work in any type of soil/rock, PCC (1:3:6) type C-1 earthing chamber, precast RCC slab 50mm thick in cement concrete (1:2:4) type B-1 reinforce with welded steel wire babric (APM) weight not less than 4 Kg/Sqm, funnel with GI watering pipe of 20mm bore medium grade, wire mesh and lugs, GI protection pipe of 40mm bore medium grade 7.5 m long test point etc complete all as specified and directed.
Supply, install, testing and commissioning weather and vermin proof LT feedar pillar box (Panel board) factory fabricated outdoor type canopy top factory lock front and back opening totally enclosed made out of 3.15 mm thick sheetmetal enclosure of suitable size with angle iron frame of MS angle 40 X 40 X 5 mm upto 1.5 mtrs length from ground level duly powder coated of 600(W) X 900(H) X 400 (D) mm suitable for operation on 3 phase 4 wire, 440 volts 50 Hz system, with hinged panel doors (covers) on two sides with handles, bottom gland plate and side locking arrangement consisting of sufficient Nos of circular cables entrly holes at bottom only with suitable PVC/rubber/wooden bushes to prevent ingress of water/vermin etc. inside the enclosure, the required Nos of holes to be fixed with chromium plated brass cable glands for cable entry and exit complete with necessary internal wiring with stranded copper conductor PVC insulated cables of adequate size, duly powder coated (15micron) grey hammer tone with one coat of including connecting with L.T armoured incoming and outgoing cables and including required sizes of cable lugs of aluminium and LT panel should be CPRI approved and factory fabricated complete all as specified and directed and consisting of the following:- (i) MCCB 125 Amp 4 Pole(AC 415 Volt), 16 KA-01 No (ii) 63 Amp MCCB TPN ,415V10 KA- 02 Nos, (Out going) (ii) 100 Amp MCCB TPN ,415V10 KA- 02 Nos, (Out going) (iii) Aluminum bus bar 200 Amp - 01 set (iv) Indicator LED lamp RYB - 01 Set (v) Internal wiring with copper conductor incl necessary lugs and thimbles - 01 Job (vi) Space for 02 Nos of spare MCB (vi) change over switch 125 Amp -01 Nos
Supply and fixing MCCB 4 Pole, 415 V, Adjustable type, 100 Amps with breaking capacity 16 KA complete all as specified and directed.
S&F Single pole and neutral enclosure with a two pin and earth plug and socket complete with one single pole MCB 20 Amp complete all as specified and directed.
M&L for old size, burnt brick, sub class 'B', laid in trenches, abutting each other with a gap not exceeding 10 mm , vertically over the cable for cable protection complete all as specified and directed.
S&F 40 mm bore GI tubing, light grade galvanized with all fitting and laid in trenches complete all as specified and directed.
M & L for boring of holes up to 80 mm dia under road pavement, hard standing, etc by trench- less technology using ultra sound technique complete all as specified and directed by Engineer-in- charge. Note:- Pipe for protection of cable shall be measured and paid separately.
Navkar Enterprises
Paliwal Construction Company
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .