PROVN OF SUBMERSIBLE DEFLOODING ARRANGEMENTS WITH ASSOCIATED PIPELINE WORKS IN NEW LAND AT ICGS OKHA UNDER GE (I) CG PORBANDAR

Amount

Schedule 'A'

Material and labour for Non Clog Submersible pump set 20 H.P. For Drainage Waste Water 3120 Ltr per minute at 16 Mtr head rated 1440 rpm, complete all as specified and directed by Engineer-in-charge. Make-Kirloskar/KSB/ Mather & Platt/ Jyoti/ Grundfos pumps India Pvt Ltd/ CRI Pumps/ Suguna Pumps

Material and labour For SS pipe line for delivery side from pump to common header size 200mm with T Y connection, complete all as specified and directed by Engineer-in-charge.

Material and labour For DI joint with tail piece for connection 200mm SS delivery pipe line to upto sea bund, complete all as specified and directed by Engineer-in-charge.

Supply & Fixing Sluice Valve 200mm PN 1.0 ratings - on delivery side, complete all as specified and directed by Engineer-in-charge. Make-Kirloskar/L&T/ Audco/ Leader / Bir / Upadhyay

Supply & Fixing Non return valve 200mm PN 1.0 ratings on delivery side, complete all as specified and directed by Engineer-in-charge. Make-Kirloskar/L&T/ Audco/ Leader / Sant / Upadhyay

Material and labour for DI Pipe 300mm K9, complete all as specified and directed by Engineer-in-charge. Make-Electro- Steel Casting / Jindal /Tata Metaliks /SAW Pipes

Material and labour for Motor control panel Thermoplastic Polycarbonate Body size-680x950x331mm Indoor /Wall mounted type 415 V AC 50 Hz insulated IP54 Protection installed over properly supported legs suitably grouted to PCC including Copper Bus bar RYB and N of 250 Amp capacity one set with internal wiring including the following accessories. INCOMING :- (i) MCCB 4 Pole 415 volt microprocessor release 36 KA of capacity 100 Amps -01 No. (ii) Digital MFM-01 No (iii) Phase indicator lamps For Each (RYB) -01 set OUTGOING (iv) Contactor TP 50 A-01 Nos (v) Contactor TP 80 A -02 Nos (vi) OLR 20-33 A-01 Nos (vii)Star/Delta Timer-01 Nos (viii) Start/stop Push Button for each starter-01 Nos (ix) ON/OFF/Trip indicating lamp for starter -01 Nos (x) Control fuse with base(2A/32A)-02 Nos (xi) Single phase Preventor-01 Nos (xii) Control fuse terminal with 2 A-01 Nos Note : (a) Cost of cable gland upto size of 120/50 sqmm deemed to be included in quoted rate. (b) Make for LT Switch gear: L&T/ Legrand/ Hager/ Schneider/ Siemens (c) The panel make: Hensel/L&T(ASCENT)/ Hager/ Schneider/ Siemens

Supply & Fixing XLPE insulated, armoured heavy duty electric cable with aluminium conductor, 1100 volts grade, cross-sectional area 35 Sqmm 3.5 Core, complete all as specified and directed by Engineer-in-charge.

Supply & Fixing XLPE insulated, armoured heavy duty electric cable with aluminium conductor, 1100 volts grade, cross-sectional area 50 Sqmm 3.5 Core, complete all as specified and directed by Engineer-in-charge.

Supply and lay double wall corrugated (DWC) high density polythene pipes having corrugation on the outer wall and plain surface on the inner wall confirming to ISI 14930 (Part I and II) for protection of underground cables laid in trenches / road/ nallah or fixed along wall. poles or laid under floor (including cutting floor/Road and making good to match with existing adjoining surface etc. for cable protection, complete all as specified and directed by Engineer-in-charge. Following Size of DWC Pipe:- Make: Rex/Poly/Gemini

63mm outer dia

77mm outer dia

Excavation in trenches not exceeding 1.5 Metre wide and not exceeding 1.5 Metre in depth and getting out Soft/ Loose soil, complete all as specified and directed by Engineer-in-charge.

Returning filling in including spreading, levelling, watering and well Ramming in layers not exceeding 25 cm thick, complete all as specified and directed by Engineer-in-charge.

Removing excavated material not exceeding 50 Metre and depositing where directed at a level not exceeding 1.5 Metre above the starting point, complete all as specified and directed by Engineer-in-charge.

Material and labour DI fitting, complete all as specified and directed by Engineer-in-charge.

Material and labour for Earthing complete with galvanised steel earth plate electrode 60cm×60cm.× 6mm thick, buried directly in ground (earth pit not less than 2.25 metres deep below ground level) with top edge of the plate not less ‘than 1.5 metres below normal ground level, connected to using galvanised iron strip 25×4mm as Earthing lead by means of bolts, nuts, check nuts and washers of galvanised iron or steel all as shown in electrical plate No. 3 connected to Earthing test point all as specified or indicated including testing on completion, complete all as specified and directed by Engineer-in-charge.

RAJ ENTERPRISE (BID ID -3261844)

Harsh Infrastructure (BID ID -3260900)

SURESH ELECTRICALS (BID ID -3263110)

VIVEK JITENDRABHAI KATAR (BID ID -3260565)

V D JADEJA (BID ID -3263387)

AADESH CONSTRUCTION (BID ID -3262560)