Fabrication work (Labour work) of making various items at Lunawada Store yard (Located Godhra) under Lunawada O&M Division.

SCHEDULE SHOWING THE MATERIALS TO BE SUPPLIED BY MADHYA GUJARAT VIJ COMPANY LIMITED

AT DEPARTMENTAL STORE - LUNAWADA O&M DIVISION.

1 All required fabrication materials M.S. Angle 65 x 65 x 6 mm

such as M.S. Angle 50 x 50 x 6 mm

M.S. Round Bar 16mm2

M.S. Flat 50 x 6 mm

M.S. Channel 100 x 50 x 6mm

G.I. WIRE No 8 SWG

2 Rate of which the material be Free Item

charged to Contractor

3 Store at which materials will be All required raw materials will be issued from

supplied Lunawada Store of Lunawada (O&M) Division of

4 Sales Tax No.

1. The case, the prescribed steel size section is not available than, the alternate section available

shall be issued for fabrication for which, no additional rate shall be granted.

2. The Contractor has to carry out fabrication work as per specification and drawing of each items

3. 1% maximum cutting allowance (wastage) is permissible as per circular

No. MGVCL/ACE(CC)/1659, Date: 24-29/04/2013.

4. You will have to carry out the work at Lunawada Division Store (Now situated at Godhra).

5. Electricity Expense will be deducted at 2.5% on Actual work done by contractor.

6. You will have to paint-fabricated material with two coat of red oxide and fabricated material

will have to be stacked by you in our store as per instruction of officer in charges.

Executive Engineer (O&M),

Signature of Contractor M.G.V.C.L., Division Office

with Rubber Stamp Lunawada