Annual Maintenance and Repairs for Submersible motors, pumps required for supplying water in TMC Kurekuppa limits

Labour charges for Lifting of non functioning submersible pump set along with cable and GI pipes (Each length 6m) for 50 mm Dia

Lifting of struck up submersible pump set upto 300 ft in tmc kurekuppa

Labour charges for Erection of new repaired submersible pump set along with GI pipes (32mm / 50mm), cable (New submersible pump set if required will be supplied by the department free of cost and released pump set should be handed over to department) including transportation (Each length 6 m)

Rewinding of submergible pumpset with copper winding wires of appropriate gauge, as per specifications and / or directions of the departmental officials, including all materials, labour, equipment and testing. for all types of submergible pumpsets etc. (with guarantee period not less than 6 months) forFor all types of submergible pumpsets upto 3.0 H.P

For all types of submergible pumpsets above 3 HP and upto 5.0 H.P.

For all types of submergible pumpsets above 5.5 HP and upto 6.0 H.P.

For all types of submergible pumpsets above 7.5 HP and upto 8.0H.P.

For all types of submergible pumpsets above 9.5 HP and upto 10.0H.P

For all types of submergible pumpsets above 11 HP and upto 12 H.P

Replace the components of submergible pump sets, requiring replacements decided by the departmental officials, with respective make of damaged ones, including all materials, labour, equipments and testing etc.(with gurantee of period not less than 1 year) for The bowls of same type and make

Intermidiate piece(I.P) with I.P for leaded bronze bush

Oil seal for submersible pump sets

Oil seal steel bush for submersible pump sets

Guide vane for submersible pump sets

Impeller shell moulded with alluminium & bronze

Dishcharge outlet(D.O) Bearing and D.O Steel bush D.O Bearing

Steel bush ( D.O steel bush)

Allen screw for submersible pump sets in tmc kurekuppa

The pump shaft made out of stainless steel counterless ground with key way (upto 8 stages). Extra for each stage at Rs.40/-.

Pump key (Stainless Steel) for submersible pump sets in tmc kurekuppa

Pump coupling (Stainless)

Non return (NRV) assembly complete with rubber 0 rings

Cable guard for submersible pump set

Stainer for submersible pump sets

Brass Filter for submersible pump set

The Labour Charges for overhauling of the pump set. in tmc kurekuppa

Replace the components of motor parts of submergible pump sets, items requiring replacements decided by the departmental officials, with respective make of damaged ones, including all materials, labour, equipments and testing etc and wtih guarantee / warranty for one year for The STARTOR of motor up to 3HP

The STATOR of motor 3 to 4 H.P

The STATOR of motor 4 to 5 H.P

The ROTOR of motor up to 3HP

The ROTOR of motor upto 3.0 H.P to 4.0 HP

The ROTOR motor 4 to 5 H.P in tmc kurekuppa

The upper flange for submersible pump sets

The lower flange for submersible pump sets

upper/ lower housing for submersible pump sets

The Lock Ring for submersible pump sets

The Carbon Housing for submersible pump set

The Carbon Housing (Thrust bearing block assembly complete with segment bearing pad. for submersible pump set

The Carbon Housing (Top carbond / ferrodo padding)for submersible pump set

The Stud and Nuts for submersible pump sets

The Gun Metal bearing, centrifugally cast Aluminium Bronze bearing brush

The Circlips for submersible pump sets

The Motor base with pin for submersible pump set

The Transportation of pumping machineries for submersible pump sets

The Labour charges only for overhauling for submersible pump