Improvement of black spot on Giri Nagar Jaton road km 0/0 to 25/0. (SH- C/o retaining wall in cement concrete at various RDs from 5/810 to 5/820, 8/990 to 9/014 and wire crates at various RDs from 3/025 to 3/030, 2/055 to 3/060 and 18/785 to 18/799)

Amount

Earth work in excavation for strucuture as per drawing and technical specifications clause 305.1 including setting out construction of shoring and bracing removal of stumps and other deleterious materilas and disposal up to a lead of 50 metre, dressing of sides and bottom and back filling in treanches with excavted suitable materials upto 3 metre depth. including carriage of materials with in all leads,lifts and other incidentals complete as per entire satisfaction of the Engineer-in-charge.

Providing and Laying concrete 1:4:8 ( one cement :four sand: eight graded stone aggregate ) 40 mm (forty milimetre)nominal size for Plain / reinforced concrete in open foundations complete as per drawing and technical specifications clause 802,803,1202 and 1203. including carriage of materials with in all leads,lifts and other incidentals complete as per entire satisfaction of the Engineer-in-charge. .

Providing weapholes in brick masonry / stone masonry /plain reinforced concrete abutment, wing wall, return wall with 100 mm dia PVC pipe extending through the full with of the structures with slop of 1(v):20(H) towards drawing face complete as per drawing and technical specification clauses 614, 709, 1204.3.7 including carriage of materials with in all leads,lifts and other incidentals complete as per entire satisfaction of the Engineer-in-charge.

Providing and Laying filter media with granular crushed aggregate as per specification to thickness of not less than 600mm with smaller size towards the soil and bigger size towards the wall and providing over the entire surface behind abutment wing wall ,return wall to the full height compacted to firm condition complete as per drawing and technical specification. including all eads lifts and carriage of materials, as per the direction of Engineer-In charge.

Wire crates of G.I. wire filled with boulders with squarer cut faces against the wire (wire crate to be measured and paid for separatly ) including hauling of material in all leads ,lifts as per the entire satisfaction and direction of Engineer -in- Charge.

Wire creates of G.I. wire filled with boulders with square cut faces against the wire (boulder filling to be measured and paid for separately) G.I. wire 4mm thick (four milimetre) (corresponding to SWG-8) in 15cmx15cm (fifteen cftimetres into fifteen centimetre) mesh (diagonal dimensions) including hauling of material in all leads ,lifts as per the entire satisfaction and direction of Engineer -in- Charge.

RAMESH CHAND

VAJID

Surender Singh

RATAN LAL