REPAIR/REPLACEMENT OF UNSERVICEABLE/ BURNT OUT AND OLD ALUMINIUM WIRING AND ELECTRICAL FITTINGS ALONG WITH PERIODICAL SERVICES, ANTITERMITE TREATMENT AND OTHER MISC WORKS IN MD ACCN AT KATARIBAGH AND NAVAL BASE KOCHI AND CERTAIN SINGLE LIVING ACCN A

Amount

M&L for preparation by complete removal of existing treatment of decorated surfaces of walls (plastered or unplastered) including cornices complete all as specified and as directed by Engr-in-Charge

M&L for applying 1.5mm thick wall care putty on old and new plaster surface of wall complete all as specified and as directed by Engr in-Charge.

M&L for preparation and applying two coat of distemper oil emulsion over a coat of alkali resistant primer paint complete all as specified and as directed by Engr-in-Charge.

M&L for preparation of old decorated surfaces of walls including cornices (plastered or unplastered) and applying one coat of white wash complete all as specified and as directed by Engr-in-Charge.

M&L for preparation of old decorated surfaces of ceiling and applying one coat of oil bound distemper complete all as specified and as directed by Engr-in-Charge.

M&L for preparation of new putty surfaces of wall of any description over 10cm width or girth and applying two coat of plastic emulsion paint including a coat of primer complete all as specified and as directed by Engr-in-Charge

M&L for preparation of old painted wooden surfaces of any description exc 10cm width or girth and applying one coat of synthetic enamel paint complete all as specified and as directed by Engr-in-Charge.

M&L for preparation of old painted steel surfaces of any description over 10cm width or girth and applying one finishing coat of synthetic enamel paint complete all as specified and as directed by Engr-in-Charge

M&L for anti termite treatment along the external/internal wall below concrete or masonry apron using chemical emulsion @ 2.25 litres per linear metre including drilling and plugging holes etc. in apron complete all as specified and as directed.

M&L for anti termite treatment at points of contact of wood work by chemical emulsion (in oil or kerosene based solution) @ 0.5 litrehole by drilling 6mm dia holes at a downward angle of 45 degree at 150mm centre to centre and sealing the same complete all as specified and as directed.

Taking down aluminium/copper point wiring (light,fan,socket or power) complete, including fixture and fittings such as switches,ceiling roses, pendants, regulators, sockets,light fitting etc. Removing materials to store for keeping in safe custody or for taking credit (credit for above items should be made as per conditions separately) and making good disturbed surfaces of walls,floors,etc. complete all as specified and as directed by the Engr-in-Charge.

Material and labour for point wiring for one light/fan point with 1.5 sqmm PVC insulated (FRLSH) unsheathed copper conductor multistranded 1100 volts grade controlled by one way switch including 1.5 sqmm PVC (FRLSH) insulated unsheathed copper cable multistrand conductor 1100 volts grade for continuity conductor including connected to common earth dolly drawn through and including rigid PVC Conduit medium grade ISI marked concealed of suitable size with all accessories and sunken box of 1.6 mm thick and 60 mm depth pressed steel box factory made for mounting of modular switch, socket and modular fan regulator with modular frames covers including chase cutting and making good to the disturbed surface and matching to the existing finishes specifications complete all as specified and as directed by the Engr-in-Charge

All as per item No 12 here in before but for one bell point controlled by one 5 Amp bell push on independent board complete all as specified and directed.

All as per item No 12 here in before but for one 5 pin 5 Amp socket outlet point on independent board complete all as specified and directed.

All as per item No 12 here in before but for one 5 pin 5 Amp socket outlet point on the same board complete all as specified and directed.

All as per item No 12 here in before but using with 2.5 Sqmm copper conductor cables multistranded (FRLSH) PVC insulated , unsheated cable and including 2.5 Sqmm copper conductor cable multistranded(FRLSH) PVC insulated and unsheated cable as earth continity wire and connecting to common earth dolly for one 6 pin 15 Amp socket outlet point on independent board complete all as specified and directed.

Taking down old unserviceable submain wiring any make and any type all as specified and directed.

Taking down old unserviceable MCB DB/industrial socket any type and any make all as specified and directed.

Taking down old unserviceable earthing complete all as specified and directed by engr-in-charge

Supply and fix ceiling rose surface bakelite 65 x 50mm 3 terminals 240 Volt 50 Hz Complete all as specified and directed.

S & F in modular type socket 6 Amps-2/3 pin combined 2 module complete all as specified and directed

S&F in switch modular type single pole, 6 Amps, one way all as per specified & directed.

S&F in Modular sockets multipurpose 6 Amp & 16 Amps, 5 pin complete all as specified and directed

S&F in switch modular type 1 module,16 Amps,one way all as per specified and directed

S&F in electric bell , AC 230 V,single pole complete all as specified and as directed

S&F in bell push modular 6 Amps, 1 module complete all as specified and as directed

S&F in Modular fan step regulator 120 W, 2 module complete all as specified and as directed

Supply and fix Industrial compact batten suitable for single LED Tube light with integral LED Driver,120 Lumen/Watt available in Single connection up with three flexible copper conductor cable of suitable size from ceiling rose complete all as specified and directed by Eng-in-charge. model:REGALBATTENT8UPTO1X22WSSBSWH of havells make or equivalent model of other approved manufacturers from the list.

S&F in repair LED light fitting 20 W, high performance batten, 220 volt ,50 Hz, 6000 k, 120 Lumen/watt surface mounted high quality extruded polycarbonate ,environmental friendly ,energy efficient , with all connecting accessories ,with suitable connection complete all as specified. Make:- Cat part no-LUMILINEBS20WLED865SPCWH of havells/ Cat part No.LT520P of Luker/ Cat part No.CSS-103-20-65-SL-NWH of Crompton or equivalent model of other approved manufacturers from the list.

S&F in repair Down rod, suitably threaded and holed, made out of 15 mm dia GI tubes, duly painted, 2' long, suitable for ceiling fans any type, any make, any size all as directed.

Supply and fixing LED light fitting mirror type with high out put diffuser 2 feet, 10 watt, 100Lumen/Watt, 220 V AC decorative type with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size complete. Make:- Cat part no-LUMILINEBS10WLED865SPCWH of havells or equivalent model of other approved manufacturers from the list.

Supply and fix Bulk head light 20 Watt,120 Lumen/Watt, PDC Housing LED Bulkhead Luminaire with Opal di user, Equipped with 2kv inbuilt surge protection with IP65 protection rating. Make:- Cat part no-BIBWP 10W LED of Bajaj or equivalent model of other approved manufacturers from the list.

Supply and fixing round shape 6 watt 220 volts AC recessed type with high efficiency PMMA diffuser soft glare free light complete with drivers, holders,LED lamp suitable for roof ceiling including connecting up with three core flexible copper conductor cable of suitable size complete.

Supply and fix Lamp holder, PVC/Polycarbonate type with back plate suitable for batten fittings complete all as specified and directed by eng-in-charge

Material and labour for submain wiring with 2 runs of 2.5 Sqmm single core,PVC insulated, unsheathed, multistranded copper conductor FRLSH cable 1100 volts grade drawn through PVC concealed conduit not less than 25 mm with all accessories one run of 2.5 Sqmm cable single core PVC insulated, unsheathed, ,1100 Volts grade multistranded copper conductor FRLSH cable as earth continuity conductor and connecting including cutting the chases etc and making good the disturbed surface to match with the existing complete all as specified and directed. Note:-Two runs of 2.5 Sqmm size PVC copper cable, One run of 2.5 Sqmm size PVC copper cable and one run of PVC conduit shall be measured as one unit length.

Material and labour for submain wiring with 2 runs of 4 Sqmm single core,PVC insulated, unsheathed, multistranded copper conductor FRLSH cable 1100 volts grade drawn through PVC concealed conduit not less than 25 mm with all accessories one run of 4 Sqmm cable single core PVC insulated, unsheathed, ,1100 Volts grade multistranded copper conductor FRLSH cable as earth continuity conductor and connecting including cutting the chases etc and making good the disturbed surface to match with the existing complete all as specified and directed. Note:-Two runs of 4 Sqmm size PVC copper cable, One run of 4 Sqmm size PVC copper cable and one run of PVC conduit shall be measured as one unit length.

Material and labour for submain wiring with 2 runs of 6 Sqmm single core,PVC insulated, unsheathed, multistranded copper conductor FRLSH cable 1100 volts grade drawn through PVC PVC consealed conduit with all accessories on surface, one run of 6Sqmm cable single core PVC insulated, unsheathed, ,1100 Volts grade multistranded copper conductor FRLSH cable as earth continuity conductor and connecting including cutting the chases etc and making good the disturbed surface to match with the existing complete all as specified and directed. Note:-Two runs of 6 Sqmm size PVC copper cable, One run of 6 Sqmm size PVC copper cable and one run of PVC conduit shall be measured as one unit length.

Material and labour for submain wiring with 2 runs of 10 Sqmm single core,PVC insulated, unsheathed, multistranded copper conductor FRLSH cable 1100 volts grade drawn through PVC PVC consealed conduit with all accessories on surface, one run of 10 Sqmm cable single core PVC insulated, unsheathed, ,1100 Volts grade multistranded copper conductor FRLSH cable as earth continuity conductor and connecting including cutting the chases etc and making good the disturbed surface to match with the existing complete all as specified and directed. Note:-Two runs of 10 Sqmm size PVC copper cable, One run of 10 Sqmm size PVC copper cable and one run of PVC conduit shall be measured as one unit length.

Material and labour for submain wiring with 4 runs of 10 Sqmm single core,PVC insulated, unsheathed, multistranded copper conductor FRLSH cable 1100 volts grade drawn through PVC caping and casing with all accessories on surface, two runs of 6 Sqmm cable single core PVC insulated, unsheathed, ,1100 Volts grade multistranded copper conductor FRLSH cable as earth continuity conductor and connecting with suitable size thimble including cutting the chases etc and making good the disturbed surface to match with the existing complete all as specified and directed. Note:-Four runs of 10 Sqmm size PVC copper cable, two run of 10 Sqmm size PVC copper cable and one run of PVC caping and casing shall be measured as one unit length.

Supply and fix in repair XLPE insulated, galvanised steel strip or wire armoured heavy duty electric cable with stranded aluminium conductor,1100 volts grade, cross sectional area 6 sq mm 2 core including taking down old unserviceable cable complete all as specified and directed by eng-in-chare

Supply and fix in repair XLPE insulated, galvanised steel strip or wire armoured heavy duty electric cable with stranded aluminium conductor,1100 volts grade, cross sectional area 10 sq mm 4 core including taking down old unserviceable cable complete all as specified and directed by eng-in-chare

Supply and fix in repair XLPE insulated, galvanised steel strip or wire armoured heavy duty electric cable with stranded aluminium conductor,1100 volts grade, cross sectional area 16 sq mm 4 core including taking down old unserviceable cable complete all as specified and directed by eng-in-chare

Supply and fix single pole and neutral enclosure with a two pin and earth plug socket complete with one single pole MCB 20 Amp,240 Volts, 50 Hz including taking down old one Make:- Legrand, L&T, Schneider or equivalent model of other approved manufacturers from the list.

S&F Sheet metal enclosure Vertical TPN for DB 8 way with MCCB 100 Amps bus bar double door IP 43 metal door complete all as specified and as directed by Engineer-in-Charge.

S&F Sheet metal enclosure Vertical TPN for DB 4 way with MCB 63 Amps bus bar double door IP 43 metal door complete all as specified and as directed by Engineer-in-Charge.

Supply and Fix in repair Sheet Metal Enclosure for MCB DB, SPN 8 Ways double door,with 200 Amps rated bus bar , having IP-43 protection including taking down of old DB complete all as specified

Supply and Fix in repair Sheet Metal Enclosure for MCB DB, SPN 4 Ways double door,with 200 Amps rated bus bar , having IP-43 protection including taking down of old DB complete all as specified

Supply and Fix in repair Sheet Metal Enclosure for MCB DB, SPN 12 Ways double door,with 200 Amps rated bus bar , having IP-43 protection including taking down of old DB complete all as specified

Supply and fixing in repair 415 V 10 KA 'B' curve miniature circuit breaker (MCB) of four poles and current carrying capacity 40 Amp to 100 Amps in the DB Complete with connection testing and commissioning complete all as specified

Supply and fixing amp rating 240 V, 10 KA 'C' curve miniature circuit breaker (MCB) 40-63 amps of two poles anc current carrying capacity in the DB Complete with connection testing and commissioning complete all as specified

Supply and fixing in repair 240 V, 10 KA 'B' curve miniature circuit breaker (MCB) of single pole and current carrying capacity 5 Amp to 32 Amps in the MCB DB Complete with connection testing and commissioning complete all as specified

Taking down ceiling fan,sealing cable end, dismantling blades and removing fan and blades and taken on safe custody and painting of ceiling fans complete, insitu with synthetic enamel paint by spraying including filling cavities with filler, one coat after cleaning with all dust etc, and again hanging ceiling fan and connecting up including provision of cable from ceiling rose or connector to fan complete all as specified and as directed by eng-in-charge

All as per item no.52 above but wall mounted fan of 400/450 mm sweep complete all as specified

Supply and fixing in repair LED street light fitting 25 Watt, 120 Lumen/Watt, 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection complete all as specified and as directed by eng-in-charge Make:Havells model:LHEXAYP7PN6K020 or equivalent model of other approved manufacturers from the list.

Supply and fixing in repair decorative LED wall mounted light 12 Watt,120 Lumen/Watt, voltage range 140-265 volts ,color warm white , IP-20 fixture made up of metal, suitable connection all as specified and directed Cat Part No- LWL105 of luker,Havells,Philiphs or equivalent model of other approved manufacturers from the list.

Materials and labour, earthing complete with galvanised iron earth plate electrode 600 mm x 600 mm x 6 mm thick, burried directly and preferably vertically in ground, earth pit not less than 2.25 m below ground level with top edge of the plate not less than 1.5 m below ground level connetced with galvanised wire 4mm dia by means of nuts, bolts, check nuts and washers made of galvanised iron or steel earthing lead to be protected by galvanised iron pipe 15 mm bore (medium grade) and other end connected to earthing test point or lightening arrestor or main controlling switch all as shown in electrical plate No 3 of SSR Part-I 2009 including providing funnel with 20mm bore galvanised iron pipe (light grade), wire mesh, charcoal or coke and common salt in alternate layer of 15cm (compacted thickness) all round the earth electrode, concrete earth pit in PCC (1:3:6) type C-1 (with 20mm graded stone aggregate), 50mm thick precast RCC (1:2:4) type B-1 using 20mm graded stone aggregate cover slab (reinforced with 8mm dia TMT bar @ 15 cm C/C bothways and suitable handle made of 10mm dia), with 40x40x6mm MS angle iron frame including necessary earth work and testing on completion, complete all as specified and as directed.

Earth continuity conductor or main earthing lead fixed to wall on batten or recess or chases or buried in ground or drawn in conduit/pipe or fixed to poles or any other indicated situation for loop earthing etc. as required 4 mm dia galvanised iron or steel wire.

Fixing only LED light 1x20W/ 1x22W, 220V, AC decorative box type with driver, holder incliding LED type light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and as directed by Eng-in-charge.

Fixing only LED light mirror type 10W, 2 feet, 220V, AC decorative box type with driver, holder including LED type light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and as directed by Eng-in-charge.

Fixing only LED bulk head type LED light, 220V, AC decorative box type with driver, holder including LED type light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and as directed by Eng-in-charge. Note: for item Nos 64,65,66:- The light fittings obtained vide taking down of item No 11 shall be re-used.Cost of necessary cable, screws etc shall be included in the quoted rate.

Taking down ceiling fan 1200/1400 mm sweep, 230V,AC single phase from site and transporting to local market, cutting unserviceable winding from fan starter & rewinding same with super enamelled copper winding wire of existing gauge size including thoroughly cleaning all the components, oiling greasing & replacement of rusted unserviceable screws, hanging clamps with rubber reel, canopy condensers, bush, bearing & flexible copper connection wire etc complete all as directed.

All as per item No 61 here-in- before but exhaust fan 300 mm sweep complete all as specified and directed.

All as per item No 61 here-in- before but exhaust fan 250 mm sweep complete all as specified and directed.

All as per item No 61 here-in- before but wall fan 450 mm sweep complete all as specified and directed.

M&L for lathe work for proper filling/fixing of bearing /bushes in the top cover of the fan by filling a layer of metal after blazing & bottom cover of fan complete all as specified and as directed.

Supply only Ball bearing Ser No 6201 or 6202 complete all as specified directed Make: MDS/SKF/NBL.

Supply only Ball bearing Ser No 6203/6204 complete all as specified and as directed. Make: MDS/SKF/NBL or as per existing specifications at site.

Supply only Gun metal bush for ceiling fan complete all as specified and as directed.

Supply and fixing in repairs of Exhaust fan Motor of 300mm sweep complete all as directed by Engr-in-Charge.

All as per item No 69 here-in- before but for 250mm sweep complete all as specified and as directed.

Powertech Engineers

WELTRONENGINEERINGSERVICES

SUPER COOL