Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹10.1 LAccepted-AOC | L1 | Accepted-AOC LOWEST | |
| 2 | L2₹12.8 L+₹1.8 L (16.3%)Rejected-Finance 205L MODEL TOWN LUDHIANA | LUDHIANA | LUDHIANA | PUNJAB | L2 | Rejected-Finance OTHER THAN LOWEST |
Tender Value
₹10 L
EMD Value
₹20,000
Closing Date
17 Oct 2022, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE SAMBA
GE SAMBA
REPAIR TO JOINERY AND CONNECTED ITEMS IN ZONE-I AREA AT MIL STN SAMBA
2022_MES_548159_2
GE/SMB/T-31/2022-23
Open Tender
Civil Works
Item Rate
180 days
Samba
REF NIT
8 documents required · 8 mandatory
₹500
Yes
GE SAMBA
₹20,000
Yes
22 Nov 2022
26 Sept 2022
19 Oct 2022
26 Sept 2022
17 Oct 2022
4 Oct 2022
26 Sept 2022 - 27 Sept 2022
Amount
Taking down chowkats or frames with shutters (without taking off shutters from frames) area not exceeding 1.5 square metre each including cutting holes for taking out hold fasts of dismantling brick work ( holes cut and any other damage to jambs, walls for taking out hold fast shall be finished identical to existing finish without any extra cost to Govt.) complete all as specified and directed. Note- Scrap iron for window grill and angle measured separetely)
Taking down chowkats or frames with shutters (without taking off shutters from frames) area exc 1.5 sqm but not exceeding 4 square metre each including cutting holes for taking out hold fasts of dismantling brick work ( holes cut and any other damage to jambs, walls for taking out hold fast shall be finished identical to existing finish without any extra cost to Govt.) complete all as specified and directed. Note- Scrap iron for window grill and angle measured separetely)
Taking down shutter of any description not exc. 1.0 sqm each and removing to store.complete all as specified and as directed.
Taking down shutter of any description exc 1.00 Sqm but not exc. 2.0 sqm each and removing to store.complete all as specified and as directed.
Demolition of brick work or stone masonry, built in cement mortar incl all quoins, arches pillars etc complete all as specified and directed .
Dismanting of floor hearth or wall tiling including cement mortar bedding , removing serviceable tiles to store and rubbish off the premises , complete all as specified and directed.
Non-skid Coloured ceramic tiles (1st quality) 7 to 8 mm thick (square / rectangular joint free) area of each tiles exceeding 0.06 sqm but not exceeding 0.11 sqm in floors etc , set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including a layer of mortor 15 mm thick in CM 1:6, complete all as specified and directed
Glazed coloured ceramic tiles (1st quality) joint free in vertical surfaces of wall of size 450x350x7mm/ 450x300x7 mm thick set & jointed in neat cement slurry and pointed in white or coloured cement to match over and including 10 mm thick rendering in CM 1:4 on brick /concrete surfaces complete all as specified and directed .
Brick work with old size sub class 'B' burnt bricks having crushing strength not less than 75 Kg/Sqcm, straight or curved on plan exc. 6 m mean radius built in CM 1:4 , complete all as specified and directed.
Rendering 15mm thick cement plaster in two layers 5mm over 10 mm in cement mortar 1:4 on brick work or concrete surfaces finished fair and even (without using extra cement) complete all as specified and directed.
Rendering 10mm thick cement plaster in cement mortar 1:6 on brick work or concrete and finished even and smooth (without using extra cement) complete all as specified and as directed.
Preparation of new plastered surfaces of wall and applying two coats of cement base paint over a coat of primer complete all as specified and directed.
Pressed steel frames 105mm x 60mm made out of size 1.25 mm thick MS sheet for doors with one or more rebates including necessary fixing lugs, hold fast,hinges, lock strike plate, etc and making good in CM 1:3 or cement concrete 1:2:4 Type B-1 including PCC 1:3:6 C-1 as in back filling to chowkhats .complete all as specified and directed .
Pressed steel frames 125mm x 60mm made out of size 1.25 mm thick MS sheet for doors with one or more rebates including necessary fixing lugs, hold fast,hinges, lock strike plate, etc and making good in CM 1:3 or cement concrete 1:2:4 Type B-1 including PCC 1:3:6 C-1 as in back filling to chowkhats .complete all as specified and directed .
2nd class hard wood 35mm thick factory made Plain framed, panelled shutter (two panel) with lock rail and panel of 9 mm B.W.P. commercial ply or 12 mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS : 1003 (Part I), kiln seasoned and chemically pressure treated, complete all as specified and directed .
2nd class hard wood Glazed and skeleton shutters 35 mm thick, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded. fitted with cut and mitred beads for securing glass, etc.; sizes of me-mbers of shutters as specified in SSR Part I, Section 8, clause 8.24 (a); supplied and fitted to chowkats, complete all as specified and directed .
Steel window with tubular frame factory made of size 79mmx39mm 16 gauge double door (one side glazed shutter & other side gauged shutter with sash bar), rectangular tubular frame including box type hinges with steel handles, steel peg stays complete with glazing bars devetailed or welded including 10 mm MS squre as grill / guard bars, complete all as specified and directed .
Steel ventilator with tubular frame factory made of size 79mmx39mm 16 gauge rectangular tubular frame with two top hung shutter in half portion (one Gauged & other glazed) and balance fixed to frame incl T bolt to top hung shutter & peg stay incl 10mm MS Squre as grill/guard bars, complete all as specified and directed .
Aluminium (anodised) double leaf powder coated door fabricated from standard aluminium box sections all as specified and directed (Make : Hindalco / Indal / Ajit India) and comprising of the following :- a) Chowkhat / frame 100 x 44 x 1.5 mm thick b) Top & lock rail and styles of shutters 83x44x1.5 mm thick. c) Bottom rail of shutters110x44x1.5 mm thick. d) Hydraulic door closure ISI Marked (Make Amar/Sandhu/Priya -01 No each shutter) e) Upper and lower panel of 4.0 mm thick Heat obserbing glass (Make : Saint Gobain / Modi float / Triveni float glass/Hindustand Pilkington glass works) fixed with standard aluminium beading and rubber. f) Push plate standard lock and key as approved by GE g) Stain less steel / aluminium anodised 100 mm butt hinges - 04 Nos each shutter h) Aluminium door stopper with rubber pack - 01 No each shutter j) Aluminium anodised handle "D" type of 250mm dsize -2 Nos each shutter k) Aluminium anodised tower bolt 200 mm long ISI marked - 2 Nos Note : All fittings are powder coated.
Aluminium (anodised) double leaf powder coated window fabricated from standard aluminium box sections all as specified and directed (Make : Hindalco / Indal / Ajit India) and comprising of the following :- a) Chowkhat / frame 100 x 44 x 1.5 mm thick b) Top & bottom rail and styles 100x44x1.5 mm thick. c) Aluminium stay 250 mm long with peg for each shutter. d) Stain less steel / aluminium anodised 75 mm butt hinges - 02 Nos each shutter e) Panel of 4.8 to 5.0 mm thick heat observing glass pane (Make-Saint Goblin/ Modi float glass/ Hindustan Pilkington glass works) fixed with standard aluminium beading and rubber gaskets. f) Aluminium anodised handle of 100mm size standard quality (ISI Marked) -1 No each shutter g) Aluminium anodised tower bolt 100 mm long ISI marked - 2 Nos each shutter Note : All fittings are powder coated.
Providing Labour only for repair to Aluminium door any size with replacement of unserviceable/broken accessories incl taking down & refixing complete all as specified and directed .
Factory made solid PVC door frame of size 50x47mm made out of 5mm thick prelam PVC sheet with one or more rebate reinforced with MS square tube, fixed in opening as per specification & drawing No CEPZ/TD-378/11 sheet No 1/1, etc complete all as specified and directed.
Factory made Solid panel PVC Door Shutter, 30mm thick (style),consisting of frame made of M.S. tubes for top & bottom rails M.S. frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20 mm width stuck inside with solvent cement for styles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail, panelling of plain colour PVC sheet to be fitted in the M.S frame welded / sealed to the stiles & rails with suitable PVC sheet beadding and jointed together with solvent cement, suppling & fixing in the frame at site as per specification & drawing, complete all as specified and directed.
18/19 mm thick Block board, grade 1 quality, exterior grade, commercial type, with wooden beading all around the shutter fixed in repairs with screws to timber frame work. complete all as specified and directed .
18/19 mm thick pre-laminated particle board, exterior grade, pre-laminated one side with decorative choice lamination and other side balancing white lamination as in cupboards shelves / drawers shelves with wooden beading all around the shutter or drawers. complete all as specified and directed .
30 mm flaps width continuous (piano) hinges mild steel brass bright finished or electrogalvanised complete all as specified and directed .
Hasp & staple safety type aluminium anodised with mild steel hinges Spin including bolt to hinges plate fixed with screws of 100 mm in length.complete all as specified and directed.
Stainless steel wire grade SS-304 cloth 0.36mm nominal dia of wire and average width of perture 1.40mm and fixed with stainless steel wire staples, complete all as specified and directed .
Stainless steel grade SS-304 wire cloth 0.36mm nominal dia of wire and average width of perture 1.40mm and fixed with stainless steel wire staples, fixed in repair, complete all as specified and directed .
Sheet glass 3mm thick ordinary quality , n.exc 0.50 sqm fixed to metal frame with oil putty or wooden beading in each pane , complete all as specified and directed .
Sheet glass 3mm thick ordinary quality , n.exc 0.50 sqm fixed to metal frame with oil putty or wooden beading in each pane , fixed in repair including hacking out old brocken glass etc,complete all as specified and directed .
Figured sheet glass , ordinary quality 3.00 mm thk and glazing with oil putty in square not exceeding 0.5 sq m in each pain complete all as specified and directed .
5.5 mm thick sheet glass , coloured and glazing with rubber beading for aluminium door / window in squares / rectangles exc. 0.5 sqm in each pane, fixed in repair, complete all as specified and directed .
Double action floor spring hydraulically regulated made up of minimum 1.25mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty, fixed in repair, complete all as specified and directed.
Aluminium(extruded section) door closer hydraulically regulated designation no-3 , universal type , suitable foor door shutters of 851 to 1000mm in width and of weight between 61 to 80 kg and fixed in repairs Make 'Godrej ISI Mark
Aluminium tower bolt (150 mm long), anodised barrel tower bolts of extruded section complete all as specified.
Aluminium handle 150 mm long cast type anodised, complete all as specified and directed
250mm Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed complete all as specified and directed .
Floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor over all length of cover plate 150 mm, complete all as specified and directed .
Butt hinges 100 mm medium weight stainless steel complete all as specified and directed
Door Seal/snake guard fixed in repair, complete all as specified and directed .
150mm, MS ordinary door spring plate type incl roller and roller plate complete all as specified and directed .
150mm, MS ordinary door spring plate type incl roller and roller plate , fixed in repair, complete all as specified and directed .
Preparation of new wooden surfaces and applying Two coats of synthetic enamal paint on wood/wood based surfaces over a coat of pink primer exc. 10cm width or girth. complete all as specified and directed .
Preparation of new steel surfaces and applying two coats of synthetic enamel paint over a coat of red oxide primer exc.10cm width or girth. complete all as specified and directed .
2nd class hardwood plain fillets, square / rectangular / triangular in section, clean sawn, secured with nails or brads exc. 6 Sq.cm and n.exc. 13 Sq.cm in section, complete all as specifed and directed.
2nd class hardwood plain fillets, square / rectangular / triangular in section, clean sawn, secured with nails or brads exc. 13 Sq.cm and n.exc. 25 Sq.cm in section, complete all as specifed and directed.
MS stainless steel (SS-304) dropery rods fixed in repair of dia 20mm with funnels, side brackets & end caps etc on each side complete all as specified and directed .
Taking down of old/unserviceable kitchen cabinet/cupboard including all fixture and fitting, complete all as specified and directed. Note: For measurement superficial area in elevation shall be measured.
Factory made 18mm(+0.7mm) thick celuka PVC ply of density 600Kg/cbm manufacured by an ISO 900-2008 certified company. One side prelam and other side plain18mm thick Celuka PVC ply for kitchen cabinet shutter and also manufactuer's test report and test certificate is mandatory with each and every supply of the material complete as per manufacturer's specifications and drawing and as directed.
Factory made 18mm(+0.7mm) thick celuka PVC ply of density 600Kg/cbm manufacured by an ISO 900-2008 certified company. Plain 18mm thick Celuka PVC Ply for Shelf/ Partitions /Drawer and also manufacturer's test report and test certificate is mandatory with each and every supply of the material complete as per manufacturer's specifications and drawing and as directed.
Plain basket of size 17"x20"x4" md offrs accn kitchen with provision of self closing channels complete all as specified and as per sample kept in GE office. Make:-Hettich Code No. 2 M 17204 or equivalent make Godrej, Harrison.
Cup and saucer of size 17"X20"X4" md offrs accn kitchen with provision of self closing channels complete all as specified and as per sample kept in GE office. Make:-Hettich Code No. 2 S 17204 or equivalent make Godrej, Harrison.
Thali of size 17"X20"X8" md offrs accn kitchen with provision of self closing channels complete all as specified and as per sample kept in GE office. Make:-Hettich Code No. 2 T 17208 or equivalent make Godrej, Harrison.
Vegetable basket of size 17"X20"X6" md offrs accn kitchen with provision of self closing channels complete all as specified and as per sample kept in GE office. Make:-Hettich Code No. 2 V 17206 or equivalent make Godrej, Harrison.
Cutlery wire/cutlery perforated of size 17"X24"4" md offrs accn kitchen with provision of self closing channels complete all as specified and as per sample kept in GE office. Make:-Hettich Code No. 2 C 17244 or equivalent make Godrej, Harrison.
Box Cutlery of size 17"X20"X4" md offrs accn kitchen with provision of self closing channels complete all as specified and as per sample kept in GE office. Make:-Hettich Code No. 2 BC 17204 or equivalent make Godrej, Harrison.
Grain trolley of size 17"X20"X12" md offrs accn kitchen with provision of self closing channels complete all as specified and as per sample kept in GE office. Make:-Hettich Code No. 2 G 172012 or equivalent make Godrej, Harrison.
Bottle pull out 3 shelf of size 6"X20"X 21" md offrs accn kitchen with provision of self closing channels complete all as specified and as per sample kept in GE office. Make:-Hettich Code No. 2 PO 62021 or equivalent make Godrej, Harrison.
Carrousel (3/4 round) of size as per md offrs accn kitchen with provision of self closing channels complete all as specified and as per sample kept in GE office. Make:-Hettich Code No. 2 CRL 24 or equivalent make Godrej, Harrison.
Partion basket of size 17"X20"X8" md offrs accn kitchen with provision of self closing channels complete all as specified and as per sample kept in GE office. Make:-Hettich Code No. 2 PT 17208 or equivalent make Godrej, Harrison.
Bottle basket of size 15"X20"X6" md offrs accn kitchen with provision of self closing channels complete all as specified and as per sample kept in GE office. Make:-Hettich or equivalent make Godrej, Harrison.
Magnet catcher for kitchen cabnet complete all as specified and as per sample kept in GE office. Make:-Hettich,Godrej, Harrison or equivalent make.
Steel fancy handle 150 mm size for kitchen cabnet complete all as specified and as per sample kept in GE office. Make:-Hettich,Godrej Harrison or equivalent make.
Steel fancy handle 200 mm size for kitchen cabnet complete all as specified and as per sample kept in GE office. Make:-Hettich,Godrej Harrison or eequivalent make.
Steel fancy handle 250 mm size for kitchen cabnet complete all as specified and as per sample kept in GE office. Make:-Hettich,Godrej Harrison or equivalent make.
Steel fancy handle 300 mm size for kitchen cabnet complete all as specified and as per sample kept in GE office. Make:-Hettich,Godrej Harrison or equivalent make.
Crank hinges for kitchen cupboard/ almiraha any size any type for md offrs accn complete all as specified and as per sample kept in GE office. Make:-Hettich,Godrej Harrison or equivalent make.
Corner crank hinges for kitchen cupboard/ almiraha any size any type for md offrs accn complete all as specified and as per sample kept in GE office. Make:-Hettich,Godrej Harrison or equivalent make.
Sliding channel with all assories for cupboard/ almiraha any size any type for md offrs accn complete all as specified and as per sample kept in GE office. Make:-Hettich,Godrej Harrison or equivalent make.
Note:- The contract sum arrived after deduction of amount of Sch of credit as listed in tender Documents.
s k construction co
stage.html
html • 0.04 MB
tech_eval.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .