Special Repair to Health Sub Centre Bharari Tehsil Nohradhar Distt. Sirmour (H.P)

Amount

Providing and Fixing small pieces (not exceeding 150 cum (One hundred fifty cubic metre) for making good where hinges etc. have been removed from frames on joinery etc. 2nd class deodar wood. as per HPPWD specification 1990-Volume-I,including carriage of all labour, equipment and materials to various locations through all modes of transportation in all leads,lifts and other incidental charges as per the direction of the Engineer-in-Charge

Repairs to plaster in patches of 2.50 Sq.M (Two point Fifty) and under and 10 to 15mm (Ten to Fifteen milimetre) thick including cutting the patch in proper shape and replastering the surface of the wall including disposal of rubbish to the dumping ground within a lead of 20 meter with (C.M 1:4) (One cement : four sand) including carriage of all labour, equipment and materials to various locations through all modes of transportation in all leads,lifts and other incidental charges as per the direction of the Engineer-in-Charge

Demolition above G.L upto floor two level including disposal of serviceable materials and disposal of un-serviceable materials with in 20 meters lead un-reinforced cement concrete upto 15 cm. thickness. including carriage of all labour, equipment and materials to various locations through all modes of transportation in all leads,lifts and other incidental charges as per the direction of the Engineer-in-Charge

Providing and laying cement concrete 1:4:8 (1 cement :4 sand : 8 graded stone aggregate 40mm nominal size) and curing complete excluding cost of form work in foundation and plinth. including carriage of all labour, equipment and materials to various locations through all modes of transportation in all leads,lifts and other incidental charges as per the direction of the Engineer-in-Charge

Providing wood work in frames of doors, window, clerstory, and other frames wrought, framed and fixed in position 2nd class deodar wood. including carriage of all labour, equipment and materials to various locations through all modes of transportation in all leads,lifts and other incidental charges as per the direction of the Engineer-in-Charge

Providing and fixing panelled glazed or panelled and glazed shutters for doors windows and clerstory windows. Including black enamelled iron butt hinges with necessary screws. 2nd class deodar wood.including carriage of all labour, equipment and materials to various locations through all modes of transportation in all leads,lifts and other incidental charges as per the direction of the Engineer-in-Charge

Providing and fixing wire gauge shutters using galvanised M.S wire gauge I.S guage designation 85g.(Eighty) With wire of dia 0.56 mm (Zero piont Five Six milimetre) for door windows and clerestory windows including bright finished black enamelled iron hings with necessary screws, second class deodar wood as per HPPWD specification 1990-Volume-I,including carriage of all labour, equipment and materials to various locations through all modes of transportation in all leads,lifts and other incidental charges as per the direction of the Engineer-in-Charge

Providing and fixing commercial ply wood ceiling of approval quality with butt jointing and nails (frame work and cover fillets to be paid for separately) 6mm thick as per HPPWD specification 1990-Volume-I,including carriage of all labour, equipment and materials to various locations through all modes of transportation in all leads,lifts and other incidental charges as per the direction of the Engineer-in-Charge

Providing eaves board 100 mm x 25mm( Hundred into Twenty Five) thick including fixing in position 2nd class deodar wood.as per HPPWD specification 1990-Volume-I,including carriage of all labour, equipment and materials to various locations through all modes of transportation in all leads,lifts and other incidental charges as per the direction of the Engineer-in-Charge

Providing and fixing plain square edged cover fillets (beading) 50mmx12mm (Fifty millimetre into twelve milimetre) section with wood screws in celling and lining including mitring at junctions. 1st class deodar wood.as per HPPWD specification 1990-Volume-I,including carriage of all labour, equipment and materials to various locations through all modes of transportation in all leads,lifts and other incidental charges as per the direction of the Engineer-in-Charge

Providing and fixing oxidized M.S single acting spring hinges with necessary screws etc. complete. 150 mm as per HPPWD specification 1990-Volume-I,including carriage of all labour, equipment and materials to various locations through all modes of transportation in all leads,lifts and other incidental charges as per the direction of the Engineer-in-Charge

Providing and fixing oxidized M.S single door bolts with nuts and screws etc. complete. 250x 16 mm as per HPPWD specification 1990-Volume-I,including carriage of all labour, equipment and materials to various locations through all modes of transportation in all leads,lifts and other incidental charges as per the direction of the Engineer-in-Charge

Providing and fixing oxidized M.S tower bolts (barrel type) with necessary screws etc. complete. as per HPPWD specification 1990-Volume-I,including carriage of all labour, equipment and materials to various locations through all modes of transportation in all leads,lifts and other incidental charges as per the direction of the Engineer-in-Charge

Providing and fixing oxidized M.S handles with necessary screws etc. complete. as per HPPWD specification 1990-Volume-I,including carriage of all labour, equipment and materials to various locations through all modes of transportation in all leads,lifts and other incidental charges as per the direction of the Engineer-in-Charge

Providing and fixing oxidized M.S hooks and eyes etc. complete. 100 mm( Hundred Milimetre) as per HPPWD specification 1990-Volume-I,including carriage of all labour, equipment and materials to various locations through all modes of transportation in all leads,lifts and other incidental charges as per the direction of the Engineer-in-Charge

P/L Duro stone vetrified tiles (300x300 mm x10mm) ( Three thousand into three thousand into Ten milimere) in grey/coloured or approved shade in flooring, treds of steps and landing laid on a bed on 12mm (Twelve milimetre) thick cement mortar 1;3 (one cement : three sand) laid over and jointed with neat cement slurry finished with flush pointing in white cement mixed with pigment of required shade to match the shade of tiles compete including carriage of all labour, equipment and materials to various locations through all modes of transportation in all leads,lifts and other incidental charges as per the direction of the Engineer-in-Charge

Removing old paint from steel and other metal surfaces & making the surface even with hand scraping. including carriage of all labour, equipment and materials to various locations through all modes of transportation in all leads,lifts and other incidental charges as per the direction of the Engineer-in-Charge

Painting one or more coats on G.I sheets with readymixed paint of approved brand and manufecture on old work to give an even shade Red Shade.including carriage of all labour, equipment and materials to various locations through all modes of transportation in all leads,lifts and other incidental charges as per the direction of the Engineer-in-Charge

Applying priming coat over new wood and wood based surfaces after and including preparing the surface by thoroughly cleaning oil, grease, dirt and other foreign matter sand papering and knotting ready mixed paint brushing wood primer pink ,as per HPPWD specification of 1990-Volume-I,including carriage of all labour, equipment, plants and materials to various locations through all modes of transportation in all leads,lifts and other incidental charges as per the direction of the Engineer Incharge.

Painting two coats (excluding priming coat) on new wood and wood based surface with enamel paint to give an even shade including cleaning of dirt, dust and other foreign matter, sand papering and stopping with enamel paint other than whitte ,as per HPPWD specification 1990-Volume-I,including carriage of all labour, equipment, plants and materials to various locations through all modes of transportation in all leads,lifts and other incidental charges as per the direction of the Engineer Incharge.

Painting one coat (excluding priming coat)on previously painted wood and wood based surface with readymixed paint brushing to give an even shade including cleaning of all dirt,dist and other foreign matter sand papering and stopping with readymixed paint (white

White washing with leme on undecorated wall surface two coats to give an even shade including throrougly brooming the surface to remove all dirt,dust and other foreign matter.

Taking out doors, windows and clerestory windows shutters (Steel or wood) inclunding stacking with in 20 metres lead. Not exceeding 3 sqm(Three Square metre) in area.including carriage of all labour, equipment and materials to various locations through all modes of transportation in all leads,lifts and other incidental charges as per the direction of the Engineer-in-Charge

Providing form work in steel plates 3.15mm (Three point fifteen millimeter)thick welded with angle iron in frame 30*30*5mm (Thirty into thirty into five). So as to give a fair finish including strutting and propping etc, with wooden battens and ballies heights of propping and centering below supporting floor to ceiling in all heights and removal of the same for insitu- reinforced concrete & plain concrete work as per HPPWD specification 1990-Volume-I,including carriage of all labour, equipment and materials to various locations through all modes of transportation in all leads,lifts and other incidental charges as per the direction of the Engineer-in-Charge

In flat surfaces such as soffits of suspended floors, roofs, landings and the like. Floors etc. upto 200 mm ( Two hundred milimetre) in thickness upto all heights and levels. as per HPPWD specification 1990-Volume-I,including carriage of all labour, equipment and materials to various locations through all modes of transportation in all leads,lifts and other incidental charges as per the direction of the Engineer-in-Charge

Providing and laying cement concrete work 1:2:4 ( One cement two sand: four graded stone aggregate)20mm nominal size and curing omplete excluding ost of form work and reinforcment for reinforced concrete workin: suspended floor roofs lnding and bressumers and cantilivers upto floor two level. as per HPPWD specification 1990-Volume-I,including carriage of all labour, equipment and materials to various locations through all modes of transportation in all leads,lifts and other incidental charges as per the direction of the Engineer-in-Charge

Providing and fixing waste pipe flexible coil type length not less than 800mm as per HPPWD specification 1990-Volume-I,including carriage of all labour, equipment and materials to various locations through all modes of transportation in all leads,lifts and other incidental charges as per the direction of the Engineer-in-Charge

Providing and fixing to wall ceiling and floor galvanised mild steel tubes (light grade) tube fitting and clamps including making good the wall, ceiling and floor:-15mm nominal bore as per HPPWD specification 1990-Volume-I,including carriage of all labour, equipment and materials to various locations through all modes of transportation in all leads,lifts and other incidental charges as per the direction of the Engineer-in-Charge

Providing and fixing vitreous China wash down,water closet (European type. W.C. pan) with integral 'P' or 'S' trap including jointing the trap with soil pipe in cement mortar 1:1(One cement : One sand) (Seat and over to be measured and paid for separately):-Angle Indian Universal closet including carriage of all labour, equipment and materials to various locations through all modes of transportation in all leads,lifts and other incidental charges as per the direction of the Engineer-in-Charge

Providing and fixing 10.00 ltr.capacity PVC low level duel flushing cistern ISI marked No. 7231 of prayag or equivalenet with a pair of brackets with fittings such as lead valve, less syphon, 15mm nominal size PVC ball valve with polythene float, PVC handle, union and coupling for connection with inlet, outlet and overflow pipes 40 mm dia PVC flush bend with cistern and closet & over flow pipe to be paid for separately) ,as per HPPWD specification 1990-Volume-I,including carriage of all labour, equipment, plants and materials to various locations through all modes of transportation in all leads,lifts and other incidental charges as per the direction of the Engineer Incharge. A.R

Providing and fixing PTMT jet spray of approved quality and colour with one metre tube. as per HPPWD specification 1990-Volume-I,including carriage of all labour, equipment and materials to various locations through all modes of transportation in all leads,lifts and other incidental charges as per the direction of the Engineer-in-Charge

Providing and fixing plastic seat (Solid / Hollow type) and cover for wash down water closet with C.P. Brass hinges and rubber buffers : white plastic seat and cover as per HPPWD specification 1990-Volume-I,including carriage of all labour, equipment and materials to various locations through all modes of transportation in all leads,lifts and other incidental charges as per the direction of the Engineer-in-Charge

Providing and fixing vitreous China wash basin with single hole for pillar tap with C.I. or M.S. brackets painted white including cutting holes and making good the same but excluding fittings:-550mmx400mm as per HPPWD specification 1990-Volume-I,including carriage of all labour, equipment and materials to various locations through all modes of transportation in all leads,lifts and other incidental charges as per the direction of the Engineer-in-Charge

Providing and fixing PTMT mirror cabnet of approved quality and colour with steel screws and rawal plugs etc complete:-350 X 450 mm ( Three Hundred Fifty into Four Hundred Fifty Milimetre) . as per HPPWD specification 1990-Volume-I,including carriage of all labour, equipment and materials to various locations through all modes of transportation in all leads,lifts and other incidental charges as per the direction of the Engineer-in-Charge

Providing and fixing C.P. Brass Towell rail coplete with C.P. Brass brackets fixed to wooden pluges with C.P. Brass screws :-750mm x 20mmm as per HPPWD specification 1990-Volume-I,including carriage of all labour, equipment and materials to various locations through all modes of transportation in all leads,lifts and other incidental charges as per the direction of the Engineer-in-Charge

Providing and fixing charomium plated brass soap dish with C.P. Brass brackets fixed to wooden cleats with C.P. Brass screws :- as per HPPWD specification 1990-Volume-I,including carriage of all labour, equipment and materials to various locations through all modes of transportation in all leads,lifts and other incidental charges as per the direction of the Engineer-in-Charge

C.P Brass bib tap with Capstan head 15mm dia as per HPPWD specification 1990-Volume-I,including carriage of all labour, equipment and materials to various locations through all modes of transportation in all leads,lifts and other incidental charges as per the direction of the Engineer-in-Charge

C.P Brass pillar tap with Capstan head15mm dia as per HPPWD specification 1990-Volume-I,including carriage of all labour, equipment and materials to various locations through all modes of transportation in all leads,lifts and other incidental charges as per the direction of the Engineer-in-Charge

Providing and fixing brass full way valve with wheel:-15mm (Fifteen Milimetre) nominal bore as per HPPWD specification 1990-Volume-I,including carriage of all labour, equipment and materials to various locations through all modes of transportation in all leads,lifts and other incidental charges as per the direction of the Engineer-in-Charge

Providing and fixing PVC water storage tank of ISI : 12701 marked,G.I. inlet and outlet connection, 15mm (Fifteen Milimetre) nominal bore ball valve and mosquito proof PVC cover with locking arrangement including hoisting upto all heights above ground level :- 1000 litres net capacity tank all leads,lifts and other incidental charges as per the direction of the Engineer-in-Charge

Providing and fixing stainless steel kitchen sink of approved standard ISI make with drain board and C.P. waste with C.I. or M.S. brackets painted white including cutting holes and making good the same but excluding fitting.470 x 420 mm (Four hundred Seventy into Four Hundred Twenty) with boul depth178 mm ( One hundred Seventy Eight) all leads,lifts and other incidental charges as per the direction of the Engineer-in-Charge

BALBIR SINGH

M/s Bala Ram Contractor