CERTAIN REPAIRS TO TOILET, KITCHEN AND COMMON AREA IN THE OFFRS AND JCOS MD ACCN IN NORTHERN AND CENTRAL SECTOR UNDER AGE B/R-I AT MIL STN KOTA

Amount

Taking down cement plaster of any description and thickness on brick or stone walls etc including raking out joints, hacking for key, scrubbing down with water etc, complete all as specified and directed.

Dismantling floor, hearth or wall tiling/ terrazzo including cement mortar bedding (but not backing), removing tiles and rubbish off the premises, complete all as specified and directed.

Demolition of stone slabs and tiles of any description or thickness in floors etc, laid, bedded and pointed in any mortar, complete all as specified and directed.

Demolition of cement concrete (un-reinforced) in ground floor and pavings n.exc 15 cm thickness (below or above GL) and removing rubbish from premises, complete all as specified and directed.

Taking down chowkhat or frames not exc 1.50 Sqm each with shutters (with out taking off shutters from the frame), complete all as specified and directed.

Taking down chowkhat or frames exc 1.50 Sqm and not exc 4.00 Sqm each with shutters (with out taking off shutters from the frame), complete all as specified and directed.

Taking down shutters of any description exc 1 Sqm and not exc 2 Sqm each complete all as specified and directed.

Resecuring or easing and adjusting without taking down shutters of any description exceeding 1 Sqm but not exceeding 2 Sqm each, complete all as specified and directed.

Taking up or down 15 mm dia steel tubing and connection including cleaning for refixing or removal to store, complete all as specified and directed.

Taking up or down 20 mm dia steel tubing and connection including cleaning for refixing or removal to store, complete all as specified and directed.

Dismantling of existing water storage tank of any description of capacity exc. 250 ltr but n.exc. 500 ltr, complete all as specified and directed.

Dismantling of existing water storage tank of any description of capacity exc. 500 ltr but n.exc. 1000 ltr, complete all as specified and directed.

M&L for 30mm thick FACTORY MADE MOULDED DOOR SHUTTER-WOOD FREE consisting of frame made out of M.S. tubes of 19 gauge thickness and size of 25mm x 25mm for stiles, top and bottom rails. M. S. frame shall have a coat of steel primers. The inner panel shall consist of 25mm thick EPS of Density 23 Kg /Cbm. bonded with 2mm thick termite proof, water proof and fire resistant moulded PVC Sheet Manufactured by an ISO-9001-2015 certified company, with 2, 4, 6 raised panel design in different plain and / or prelam colours after routing the Moulded design on one side & 2mm plain and /or prelam PVC sheet on other side of the EPS. The edge of panel to be sealed with lipping of 15mm wide PVC sheet baton ( made by sticking 2mm rigid foam PVC sheets of 5mm (±0.25) thickness using PVC solvent cement ) and stile sides 25mm (5mm x 5nos.) thick and 30mm width PVC Sheet fitted along M.S. tube for hardware provision & for lock 25mm thick ( 5mmx5nos. ) PVC sheet of size 150mm x 200mm fixed with inner side of EPS Panel etc. complete all as per specification & drawing and as directed by Engineer-in-charge.

~ Ditto ~ all as per item No 13.00 (here-in-before) but wire gauged ie panel will be of wire gauze in lieu of wood grain printed PVC sheet panel. The wire gauze warped on additional square 8 mm M.S solid tube and this tube shall be welded to MS tube. The wire gauze shall be stretched to tighten firmlycomplete all as specified and directed. NOTE:- Supply only wire mesh will be measured and paid separately.

S & F factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/ Chowkhat of size 45 x 70 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum comp ressive strength of 58 N/mm2 , modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-in-Charge and as per specification & drawing as applicable to item 08100A given in SSR Part – II (2020). (M.S. hold fast/ lugs or SS dash fasteners shall be paid for separately). Note: For WPC solid door/window frames, minus 5mm tolerance in dimension i.e. depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made. Make:-Rajshri/Sintex/Accucel/Duraplast.

S&F for factory made 30mm thick 100% Solid WPC ( Wood polymer Composite) Laminated Flush Door Shutter of required size comprising of virgin PVC resin of K Value 57-60 ( Suspension Grade ), Calcium Carbonate and natural fibers ( Wood Powders/ rice husk/ wheat husk ) and Non toxic additives, made from Extrusion process WPC foam sheet Single Extruded ( Inner ) with having minimum density not less than 650 kg/cbm, having good screw holding capacity ( Screw Withdrawal strength of 2000 N ( Face ) & 1100 N ( Edge ), Minimum Compissive of 50 N/mm2, Modulus of elasticity 850N/mm2 and resistance of spread of flame of Class A category with Property of being Termite/ Borer Free.Water/ Moisture Proof and Fire Retardant. WPC to be Laminated with PVC foil of minimum 14 microns thick of approved design pasted on both faces of shutter and fixinng stainless Steel butt hinges of required size with necessary full body threaded star headed counter sunk SS Screws. All as per direction of Engineer In-Charge, Material test certificate and authentication should be compulsory provided by the manufacturing company : For WC/Bathroom/Toilet/Kitchen/Balcony Doors. Make:-Rajshri/Sintex/Accucel/Duraplast.

S & F in renewal of 18-19mm thick modular membrane kitchen cabinet door shutter (made out by MDF boards) in wood grain colour, half round edge complete all as specified and directed.

S & F in renewal of 18/19mm thick MDF board as in shelf and partition of kitchen cabinet complete all as directed.

S & F in renewal of medium weight, cold rolled mild steel, SS finish, (partial overlay/fully overlay of any type) diameter of cup 35mm, hinge cup depth 11.5mm, selfclosing complete all as specified and directed.

S & F in renewal of stainless steel (304) electro-polished for corrosion resistance modular thali holder / basket having size of 42 x 58.5 x 20 cm including telescopic drawer channel having weighing capacity of 6 kg complete all as specified and as directed. NOTE :- Size of basket may vary (+)5cm/(-)5cm.

S & F in renewal of stainless steel 304 electro-polished for corrosion resistance modular cup & saucer holder / basket size of 52 x 53.5 x 10 cm with telescopic drawer channel having weighing capacity of 4kg complete all as specified and directed. NOTE :- Size of basket may vary (+)5cm/(-)5cm.

S & F in renewal of 200mm length stainless steel cabinet drawers handlers complete all as specified and as directed.

S & F in renewal of stainless steel grain trolley SS 304 having size of 525x485x350mm, with heavy duty and grade steel with finish of zinc, corrosion resistance with & including telescopic drawer channel having weighing capacity of 25 kg complete all as specified and directed.

S & F in renewal of stainless steel Plane wire Basket/trolley SS 304 having size of 506x480x200mm, with heavy duty and grade steel with finish of zinc, corrosion resistance with telescopic drawer channel having weighing capacity of 25 kg complete all as specified and as directed.

S & F in renewal of stainlesss steel modular perforated cutlery basket SS 304 size of 52x48.5x10 cm with telescopic drawer channel having weighing capacity of 6 kg complete all as specified and directed

S & F in renewal of stainless steel hanging spice rack having three shelf spaces length of 500 mm complete all as specified and as directed.

S & F in renewal of wall mounted Pull it aluminium clothes drying system with L angle 31" for 4 pipe system with length of each pipe 5 ft (1.53m), i.e., total length of 20 ft (6.12m) complete all as specified and as directed.

S & F in renewal of ball catches with 8mm dia steel ball and brass body and skirting plate including letting in and fixed complete all as specofied and directed.

S & F in renewal of auto close hinges (size as per existing), stainless steel, bright finish or electro galvanised fixed complete all as specified.

S & F in renewal of 25 mm dia fancy CP curtain rod with bracket and screw with neccessary all fittings complete all as specified and directed.

S & F PVC beading n exc 5 mm wide for entrance door complete all as specified and directed.

Supply only stainless steel wire cloth, 0.36 mm nominal dia of wire and average width of aperture 1.40 mm and fixed with tinned tacks or SS wire staples complete all as specified and directed. (Note: cost of fixing of wire cloth shall be deemed included in the unit rates under respective items.)

S&F in renewal of floor door stopper of aluminium alloy body and tongue, anodised with hard drawn steel spring, fixed in floor, overall length of cover plate 140 mm, complete all as specified and directed.

S&F 100 mm size mild steel butt hinges, medium weight, cold rolled and fixed with screws, complete all as specified and directed.

S & F brass skeleton tower bolts 375mm long with cast brass plate and staples and rolled or drawn brass bolt and fixed complete all as specified and directed.

S & F brass, sliding door bolt 300mm long with sand or die-cast brass hasp, staple (bolt type) and fixing bolt with rolled or drawn brass bolts and fixed complete all as specified and directed.

S & F 150mm size extruded brass handles, fabricated type polished complete all as specified and directed.

S&F in renewal of stainless steel wire cloth, 0.36 mm nominal dia of wire and average width of aperture 1.40 mm and fixed with tinned tacks or galvanised/SS wire staples in door & steel window complete all as specified and directed.

Hacking out old broken glass (any thickness size, quality or description) from wooden frame/metal frame, glazing with putty or fixed with beads complete all as specified and directed.

S&F sheet glass 3mm thick ordinary quality and glazing with oil putty etc in squares n.exe 0.50 Sqm in each pane, complete all as specified and directed.

M&L Glazed ceramic coloured digital ceramic tiles of size 350x 250x7 mm/450X350X5-7mm thick set on vertical surfaces and jointed in neat cement slurry and pointed in white or colour cement to match, laid over and including 10 mm thick rendering in CM 1:4 backing, complete all as specified and directed.

M&L for 25mm thick plain cement concrete 1:2:4 type B-1 (using 25 mm graded stone aggregate) as in flooring/sub base finished rough to receive floor finishes/screed complete all as specified and directed.

M&L for joint free non skid coloured digital ceramic tiles, 7 to 8mm thick (square/rectangular) area of each tile exceeding 0.06 Sqm but not exceeding 0.18 Sqm, in floors etc, set and jointed in neat cement slurry and pointed in coloured cement to match the shade of tiles, laid over and including 15 mm thick screed bed in CM 1:6, complete all as specified and directed.

M&L for joint free non skid coloured digital ceramic tiles, 7 to 8mm thick (square/rectangular) area of each tile exceeding 0.18 Sqm but not exceeding 0.38 Sqm, in floors etc, set and jointed in neat cement slurry and pointed in coloured cement to match the shade of tiles, laid over and including 15 mm thick screed bed in CM 1:6, complete all as specified and directed.

M&L for joint free non skid coloured digital ceramic tiles, 7 to 8mm thick (square/rectangular) area of each tile exceeding 0.18 Sqm but not exceeding 0.38 Sqm, fixed on vertical surfaces, set and jointed in neat cement slurry and pointed in coloured cement to match the shade of tiles, laid over and including 10 mm thick rendering in CM 1:4, complete all as specified and directed.

M&L for light coloured vitrified tiles, 8-10mm thick (square/ rectangular) area of each tiles exceeding 0.42 sqm but not exceeding 1.00 sqm, as in floors etc, set and jointed in neat cement slurry and pointed in coloured cement to match the shade of tiles, laid over and including 15 mm thick screed bed in CM 1:6, complete all as specified and directed.

M&L for light coloured vitrified tiles, 8-10mm thick (square/ rectangular) area of each tile exceeding 0.42 sqm but not exceeding 1.00 sqm & fixed on vertical surfaces, set and jointed in neat cement slurry and pointed in coloured cement to match the shade of tiles, laid over and including 10 mm thick rendering in CM 1:4 backing, complete all as specified and directed.

M&L granite slab 16-18 mm thick, table rubbed and polished in cooking platform, jambs, cills, pillars, tread, risers, platform for WHB etc including bull nosing to exposed outer edges, set in CM 1:4 bedding and pointing with white cement mixed with pigment, laid over and including 20 mm thick screed bed in CM 1:6, complete all as specified and directed.

M&L for rendering 15 mm thick on stone masonry surfaces or other than fair faces of brick work in cement mortar 1:6, surface finished even and smooth without using extra cement, complete all as specified and directed.

M&L for rendering 10 mm thick on fair faces of ceiling in cement mortar 1:3 including finishing the surface even and smooth, complete all as specified and directed.

S&F in position rotational moulded polyethylene water storage tanks 500 ltrs capacity, white colour (cylinderical vertical with closed top) hoisted and fixed in position, complete all as specified in SSR Part I and as directed. Note:- PVC tank shall be ISI marked and having three layers.

S&F in position rotational moulded polyethylene water storage tanks 1000 ltrs capacity, white colour (cylinderical vertical with closed top) hoisted and fixed in position, complete all as specified in SSR Part I and as directed. Note:- PVC tank shall be ISI marked and having three layers.

S&F 20 mm dia ball brass valve, high pressure with polythene float and fly nut, screwed down for iron pipe, complete all as specified and directed.

Supply, fixing, laying & testing 15 mm bore galvanised iron water tubing 'medium grade' with and including all GI fittings such as flanges, unions, reducer sockets, socket, reducing bends, elbows, tee, checknuts, caps, plugs etc. fixed to walls, ceilings or floors, complete all as specified and directed.

Supply, fixing, laying & testing 20 mm bore galvanised iron water tubing 'medium grade' with and including all GI fittings such as flanges, unions, reducer sockets, socket, reducing bends, elbows, tee, checknuts, caps, plugs etc. fixed to walls, ceilings or floors, complete all as specified and directed.

S&F in renewal of shower rose, brass, CP, fancy type, 125 mm size with swivel joint, screwed to iron pipe or for union of 15 mm dia complete all as specified and directed. Make :- CERA Cat No F7020111AB/ Hindware Cat Part No F 160142 / JOHNSON cat No. JF 803899 or techno commercially equivalent makes specified in PS.

S&F in renewal of PVC connection 450 mm long suitable for 15 mm GI pipe with two PTMT nuts and rubber washers complete all as specified and directed.

S&F in renewal of PVC connection 600 mm long suitable for 15 mm GI pipe with two PTMT nuts and rubber washers complete all as specified and directed.

S&F in renewal of 15mm bore mixture valve chromium plated fancy type for wall in two/three pin fixed to iron pipe all as complete all as specified and as directed. Make :- CERA Cat No. F1001411 /JAQUAR Cat No. QQP7273PM /Hindware Cat No. F 74022 or techno commercial equivalent Make as speicifed in PS.

S&F in renewal of 15mm bore mixture valve chromium plated fancy type for wash hand basin centre hole fixed to iron pipe complete all as specified and as directed. Make :- CERA Cat no. F1003461 /JAQUAR cat no. QQP 7167 BPM /Hindware Cat no. F 740009 or techno commercial equivalent Make as speicifed in PS.

S&F in renewal of 15mm bore wall mounted sink mixture three in one with complete accessories fixed to iron pipe all as complete all as specified and as directed. Make :- CERA Cat No. F1017501 /Johnson Cat No. JT 1235A / Hindware Cat No. F 740023 or techno commercial equivalent Make as speicifed in PS.

S&F in renewal of angle valve 15 mm bore cast copper alloy, screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipes or for unions and fixed, complete all as specified and directed. Make :- CERA Cat no. G1017201 /JOHNSON T 2610C4 / Hindware Cat no. F 740039 or techno commercial equivalent Make as speicifed in PS.

S&F in renewal of 2 in 1 angle valve 15 mm nominal bore CP fancy pattern type, cast copper alloy, screwed down high pressure with crutch or butterfly handle screwed one end for iron pipe or for union and fixed, complete all as specified and directed. Make :- CERA Cat no. G1017211 /JOHNSON JT 1643A / Hindware Cat no. F 740006 or techno commercial equivalent Make as speicifed in PS.

S&F in renewal of long body bib taps, cast copper alloy, chromium plated, screwed down, screwed for 15 mm dia GI pipe or for brass ferrule or to GI socket complete all as specified and directed. Make :- Cera cat No. G1017152 /JAQUAR cat No. VGP-81037 /Hindware Cat No. F 740011 or techno commercially equivalent makes specified in PS.

S&F in renewal of pillar taps, 15 mm dia, cast copper alloy, fancy type, swan neck type with capstan heads, with chromium plated, screwed down high pressure with or without lettered 'hot' or cold with long screwed shanks and fly nuts, screwed for iron pipe complete all as specified and directed. Make :- CERA Cat No. F1003103 /JAQUAR cat No. COP-021PM /Hindware Cat No. F 74002 or techno commercially equivalent makes specified in PS.

S&F in renewal of vitreous china squatting pan, ‘Orissa’ pattern, size 580 x 440 mm white, with integral foot rests including PVC(SWR) 'P' or 'S' trap connecting to flush pipe and to anti syphonage pipe, including making good to floor complete all as specified and as directed. ake :- CERA Cat No Covyna, S3010109/Hindware Cat part No. J8365/ JOHNSON Cat Part No. P0461PW0400 or techno commercially equivalent makes specified in PS.

S&F in renewal of vitreons china wash down water closet pan, padestal type, white, with 'p' or 's' trap & including recessed bottom PVC seat cover of white colour and mild steel chromium plated hinging device but excluding flushing cistern, flush pipe and fixing bolt and making connections to drain or outgoing pipe and to flushing pipe, anti-syphonage pipe etc, fixed in repairs, complete all as specified and directed. Make :- CERA Cat No Conventional Pro 520*360*390, S1059101/ JAQUAR Cat No. CWS WHT-551PNPP1841Z/ JOHNSON Cat No. J 8312 or techno commercially equivalent makes specified in PS.

Supply and fix in renewal of PVC valveless, syphonic action type, flushing cistern, 10ltr capacity, low level, white, with inlet, ball valve, float and handle including brackets, connections to pipes and fixing of chain and pull, or lever, complete all as specified and as directed. Make :- CERA Cat No B1010102L/ JAQUAR Cat No. JAH-WHT-184NBTT/ JOHNSON Cat No. J 85821C or techno commercially equivalent makes specified in PS.

S&F in renewal of single unit floor mounted EWC with integrated vitreous china flusing cistern of 10 Ltrs capacity, size 670x365x735 with & including S or P trap including slim soft close seat cover etc., and including making all necessary connection complete all as specified and directed. Make :- Cat Part No-G 3907PW0103 of Johnson / Cat Part No. S 1013222VS (CHARM 6D) of Cera/ Cat Part No 4375 of Pryag or techno commercially equivalent makes specified in PS.

Supply and fix in renewal of vitreous china wash basin white counter sunk type, size 580x430 mm & including 32 mm dia CP waste fitting and PVC waste pipe 610 mm long and brackets complete all as specified and directed. Make :- CERA Cat No S 2040109/ JAQUAR cat No. OPs WHT-1580I/JOHNSON Cat No J8396 CH or techno commercially equivalent makes specified in PS.

S&F in renewal of vitreous china counter wash hand basin white with flat back of size 550x400x1600 mm, excluding chain and plug, taps and porcelain stopper but incl PVC waste pipe of 32 mm bore, 32mm dia wast coupling & its fittings, long screwed shanks and fly-nuts, flange end bedded in red lead cement, complete all as specified and directed. Make :- Cat Part No-P 7312PW 50505 of Johnson / Cat Part No. S 2020102 of Cera/ Cat Part No 4724 of Pryag or techno commercially equivalent makes specified in PS.

S&F in renewal of 75 mm dia PVC (SWR) floor trap, square type with CP grating with or without hole & including jointing to waste pipe with solvent cement and fixed in cement concrete 1:2:4 type B1 (using 20 mm graded stone aggregate) complete all as specified and directed.

S&F in renewal of PVC (SWR) pipe 75 mm bore, single socketed, in any length with rubber ring joints and fixed to walls, complete all as specified and directed.

S&F in renewal of PVC (SWR) pipe 110 mm bore, single socketed, in any length with rubber ring joints and fixed to walls, complete all as specified and directed.

S&F PVC (SWR) bend 75 mm bore, any radius, incl jointing to waste pipe with solvent cement, complete all as required and as directed.

S&F PVC (SWR) bend 110 mm bore, any radius, incl jointing to waste pipe with solvent cement, complete all as required and as directed.

S&F PVC (SWR) 110 mm bore junction single,(Single T) equal or unequal, incl jointing to waste pipe with solvent cement, complete all as specified and directed.

S&F PVC (SWR) 75 mm bore junction single,(Single T) equal or unequal, incl jointing to waste pipe with solvent cement, complete all as specified and directed.

S&F in renewal of 32 mm bore waste fittings brass CP for wash hand basin, sink etc with long screwed and fly nuts, flange end embedded in red lead cement and other end fixed, complete all as specified and directed.

S&F in renewal of grating doom of 100 mm dia, made of PTMT with or without waste hole (Minimum weight 25 gm), complete all as specified and directed.

Material and labour for preparation of old painted wooden surfaces of any description exceeding 10 cm in width or girth and applying one coat of synthetic enamel paint complete all as specified and as directed.

M & L for preparation of old or previously treated steel surfaces of any description not otherwise described over 10cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed.

Material and labour for preparation of old plastered or unplastered surfaces of wall and applying one coat of oil bound emulsion destemper of approved tint complete all as specified and as directed.

M&L preparation of newly plastered surfaces of walls and applying 3 mm thick wall care putty as per manufacturer's instructions and over it applying two coats of distemper oil emulsion over & including one coat of suitable primer, complete all as specified and directed.

M&L applying three coats of white wash after preparation of new plastered surfaces of ceiling, complete all as specified and directed.

S&F in renewal of elegant mirror cabinet with shelf with PP & PPCP material of overall size 540x340x130 mm and fixed to wall complete all as specified and directed, complete all as specified and directed.

S & F in renewal of frameless bathroom LED touch sensor mirror wall hanging size 600x450 mm incl all necessary fittings all as specified and directed

S & F in renewal of Corner glass shelf, with bracket including all necessary fittings complete all as specified and directed.

M & L for welding in repair n. exc. 10 cm in length, thickness of metal to be welded n. exc. 6 mm complete all as specified and directed.

S&F in renewal of ABS body health faucet (Bidet spray), chrome finish, including 15 mm dia chromium plated pop up connection pipe of minimum 1.00 m length with CP brass nuts, incl wall hook, complete all as specified and directed. Make:- Cera Model F 8030105AB (ABS)/ JAQUAR ALD-565/JOHNSON J F8082A or techno commercially equivalent makes specified in PS.

S&F in renewal of flushing jet CP for WC (pedestal pattern) & including PVC nozzle and flexible pipe of 1150mm long, nuts& bolts, fixed to WC, complete all as specified and directed.

S&F in renewal of PVC waste pipe 32/40 mm dia and 1150 mm long, suitable for wash hand basin, sink, urinals etc, complete all as specified and directed.

S&F in renewal of plastic water closet seat cover, coloured for pedestal pan closed pattern with flat bottom and mild steel chromium plated hinging device, complete all as specified and directed.

S&F in renewal of Toilet paper holder Vitreous China (Coloured), box type fixed to walls with chromium plated (CP) brass screws, complete all as specified and directed.

S&F in renewal of Soap dish, Stainless steel, embedded in the wall complete all as specified and directed. Make :- CERA Cat no. F5013106CH /JAQUAR cat no. AKP 35731p / Hindware Cat no. F 450022 or equivalent makes as per PS.

S&F in renewal of CP Towel ring with and including CP brass screws and cleats complete all as specified and directed. Make :- CERA Cat No. F5013115CH/JAQUAR cat No. CAN-1121N/ Hindware Cat No. F 580003 or techno commercially equivalent makes specified in PS.

S&F in renewal of CP Towel rail 600mm long with and including CP brass screws and wooden/plastic cleats (minimum weight 190 gms) complete all as specified and directed. Make :- CERA Cat No. F5013104CH/JAQUAR cat No. ACN-1111SM/ Hindware Cat No. F 4500324or techno commercially equivalent makes specified in PS.

S&F in renewal of corner glass shelf assembly of 6 mm thick glass, 12 cm wide and 60 cm long and CP guards of approved quality and fixed to wall with CP brass screws, brackets etc, complete all as specified and directed.

S&F in renewal of stainless steel sink with drainage board, 1.00mm thick for kitchen or laboratory, with plug, waste pipe, washers, including cantilever cast iron brackets of suitable size of angle iron, connecting union etc., overall size 915mm x 460mm with bowl size 410mm x 330mm x 200mm, including 32 mm dia superior quality PVC waste pipe and connecting union to pipe complete all as specified and directed.

S & F in renewal of stainless steel utensil plate rack of size 900x1000x200 mm, made of 0.60 mm thick stainless steel sheet and fixed in position, design and pattern as approved by the GE, complete all as specified and directed.

M/S R.K. Builders & Developer (BID ID -3106921)