Loading
Loading…
Loading…
Tender Value
₹20.5 L
EMD Value
₹40,912
Closing Date
11 Jun 2026, 3:00 pm5d left
EXECUTIVE ENGINEER
Executive Engineer SouthEast Bldg M, Hauz Khas, New Delhi 110016
EOR to NCC Unit at Okhla under Sub Division III, South East Building M PWD, Sunlight Colony, New Delhi during 2026-27. SH Changing of Roof sheet of boat shed, boat store, painting for structural members of roof shed and Old class room, other misc.
2026_PWD_292603_1
16/South-East(B)M/New Delhi/2026-27
Open Tender
Civil Works
30 days
Okhla
Please refer Tender documents.
10 documents required · 10 mandatory
₹0
₹40,912
Yes
4 Jun 2026
4 Jun 2026
11 Jun 2026
4 Jun 2026
11 Jun 2026
4 Jun 2026
This is a percentage-rate BOQ. The schedule below shows estimated quantities and rates. Bidders quote a single percentage above or below the total estimated cost.
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount |
|---|---|---|---|---|---|
| 1Supplying and fixing rolling shutters of approved make, made of required size M.S. laths, interlocked together through their entire length and jointed together at the end by end locks, mounted on specially designed pipe shaft with brackets, side guides and arrangements for inside and outside locking with push and pull operation complete, including the cost of providing and fixing necessary 27.5 cm long wire springs manufactured from high tensile steel wire of adequate strength conforming to IS: 4454 - part 1 and M.S. top cover of required thickness for rolling shutters. | |||||
| 1.01 | 80x1.25 mm M.S. laths with 1.25 mm thick top cover | 9.13 | sqm | 3,653.2 | ₹33,353.72 |
| 1.02 | Providing and fixing ball bearing for rolling shutters. | 13 | each | 492.35 | ₹6,400.55 |
| 2Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete. | |||||
| 2.01 | Hot finished welded type tubes | 7,552 | kg | 194.4 | ₹14,68,108.8 |
| 3 | Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-Charge) of total coated thickness 0.50mm (base metal of minimum 0.45mm thickness with total coating thickness of 0.05mm) with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by Engineer-in-charge. The sheet shall be fixed using self drilling /self tapping screws of size (5.5x 55 mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. | 588 | sqm | 718.65 | ₹4,22,566.2 |
| 4Providing and fixing precoated galvanised steel sheet roofing accessories of total coated thickness 0.50mm (base metal of minimum 0.45mm thickness with total coating thickness of 0.05mm) with Zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns using self drilling/ self tapping screws complete : | |||||
| 4.01 | Ridges plain (500 - 600mm) | 50 | metre | 532.35 | ₹26,617.5 |
| 4.02 | Gutter (600 mm over all girth) | 50 | metre | 1,313.65 | ₹65,682.5 |
| 5Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade : | |||||
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 9.38 MB
BOQ_388671.xls
BOQ • 0.29 MB
Download all tender documents and submit your bid