Construction of Link road from Main road Kothra to Gorsi Mohalla 2nd call

Earth work in excavation by mechanical means (Hydraulic excavator) over areas (exceeding 30 cm in depth, 1.5 mtr in width as well as 10 sqm on plan) in average fixed classification as, 80% All kind of soil,10% Soft Rock & 10% Hard rock (Required blasting ) including disposal of surplus, excavated earth as directed by engineer- in-charge at site for safe disposal of same without damaging private/public property and all required leads/lifts and carriage. (Complete job)

Providing and laying in position Cement concrete ( of specified grade excluding the cost of centering and shuttering – all work upto plinth level.1:5:10(1 cement : 5 coarse sand : 10 graded crushed stone aggregate 40 mm nominal size)

Dry random rubble stone masonary using nallah stone without bound stone.

Walls (Any thickness)

Construction of granular sub-base by providing close graded Material conforming to specifications, mixing in a mechanical mix plant at OMC, carriage of mixed material by tippers to work site, for all leads & lifts, spreading in uniform layers of specified thickness with motor grader on prepared surface and compacting with vibratory power roller to achieve the desired density, complete as per specifications and directions of Engineer-in-Charge. With material conforming to Grade-II (size range 53 mm to 0.075 mm ) having CBR Value-25

Supplying and stacking of graded stone aggregate at site of size range 53mm to 22.4mm (excluding carriages)

Supplying and stacking of good earth at site excluding carriage

Laying Water Bound Macadam with specified stone aggregate, stone screening, sorting, spreading to template and consolidation with power road roller of 8 to 10 tonne capacity etc. complete. Base course with 53 to 22.4mm size including stone screening 11.2mm size

Providing and laying bituminous macadam using crushed stone aggregates of specified grading premixed with bituminous binder, transported to site by tippers, laid over a previously prepared surface with paver finisher equipped with electronic sensor to the required grade, level and alignment and rolling with smooth wheeled, vibratory and tandem rollers as per specifications to achieve the desired compaction and density, complete as per specifications and directions of Engineer-in-Charge. 50 to 100 mm average compacted thickness with bitumen of grade with bitumen of grade VG-10 @ 3.5% (percentage by weight of total mix) prepared in Drum Type Hot Mix Plant of 60-90 TPH capacity.

Providing and laying seal coat of premixed fine aggregate (passing 2.36 mm and retained on 180 micron sieve) with bitumen using 128 kg of bitumen of grade VG-10 bitumen per cum of fine aggregate and 0.60 cum of fine aggregate per 100 sqm of road surface including rolling and finishing with road all complete.

Sand for an average distance of150 kms by M.T

Stone for an average distance 10 km by M.T

Stone aggregate 53mm to 22.4mm size for an average distance of 30 kms by M.T

Good earth for an average distance of 1 km by M.T