Work of Constructing Strengthening and Resurfacing of Various Important Roads as when required or in Emergency under Rajkot District (Panchayat) at Taluka Kotada Sangani (Annual Basis)

Name of work :- Work of Constructing Strengthening and Resurfacing of Various Important

Roads as when required or in Emergency under Rajkot District (Panchayat) at Taluka Kotda

Sangani (Annual Basis)

BILL OF QUANTITIES

Item Description of Item (With brief specification Quantity Unit Rate Amount

No. and reference to book of Specification)

1 Clearing and grubbing of road land 0.39 One 28455.09

incl.uprooting rank vegetation, grass, Hect.

bushes, shurbs, saplings and trees girth upto

300mm removal of stumps of trees cut

earlier and disposal of unserviceable

materials © By mechanical means in area of

2 Earthwork for embankment including 3900.00 One 165.42

breaking clods, dressing with all lead and lift Cum

(Excluding watering and consolidation) (A)

Selected soil should be From borrow area

with all lead and lift and should have CBR

not less than 6.00%.

3 Box cutting the road surface to proper slope 1620.00 One 114.44

and camber for making a base for road work Cum

including removing the excavated stuff and

depositing on the road side slopes as

directed upto all lead.

4 Earthwork in cutting in all sorts of soil and 409.50 One 140.87

soft Murrum including conveying and Cum

spreading the suff embankment as and

where directed within 200 meters from the

end of the cutting with all required lead and

5 Supplying, stacking, spreading, rolling, 780.00 One 1038.58

watering and consolidation to desired Cum

density of quarry spall with all lead and lift.

6 Scarifying graveled macadam or Bitumen 4875.00 One 43.58

macadam surface 6cm to 10cm depth Sqm

including stacking useful materials on road

side and disposing off remaining stuff.

Item Description of Item (With brief specification Quantity Unit Rate Amount

No. and reference to book of Specification)

7 Granular Sub-base with Black trap crushed 1170.00 One 1291.68

stone well Graded Material (Table.400.1) by Cum

Mix in place Method. Construction of

Granular Sub-base by Providing Black Trap

cruhsed stone well greded material,

spreading in uniform layers with motor

graded on prepared surfce, mixing by mix in

place method with rotavator at OMC, and

compacting with Vibratory roller to achieve

the desired density, complete as per

Technical Specification Clause-401. For

Grading-1 Materials.

8 WBM Grading-I 893.00 One 1854.56

Providing, laying, spreading and compacting Cum

stone agg. Of 90mm to 45mm size to water

bound macadam specification including

spreading in uniform thickness, hand

packing, rolling with smooth wheel roller 80-

100 KN in stage to proper grade and camber,

applying and brooming, stone

screening/binding material to fill-up the

intersties of coarse agg., watering and

compacting to the required density as per

Technical Specification Clasue.404-4.9A

9 WBM Grading-II 732.00 One 1717.60

Providing, laying, spreading and compacting Cum

stone agg. Of 63mm to 45mm size to water

bound macadam specification including

spreading in uniform thickness, hand

packing, rolling with smooth wheel roller 80-

100 KN in stage to proper grade and camber,

applying and brooming, stone

screening/binding material to fill-up the

intersties of coarse agg., watering and

compacting to the required density as per

Technical Specification Clasue.404.

Item Description of Item (With brief specification Quantity Unit Rate Amount

No. and reference to book of Specification)

10 Providing, laying, spreading and compacting 610.00 One 1410.06

graded stone aggegate to Wet Mix Macadam Cum

specification including premixing the

material with water at OMC in mechanical

mix plant carriege of mixed material by

tipper to site, laying in uniform layers with

paver in sub-base/base course on well

prepared surface and compacting with

vibratory roller to achieve the desired

11 Rolling and Watering of earthwork with 3900.00 One 23.41

vibratory roller including filling in Cum

depression which occur during the process

and as directed.

12 Providing and appliying primer coat with 5265.00 One 38.58

bitumen emulsion SS1 on prepared surface Sqm

of granular Base including clearing of road

surface and spraying primer at the rate of

0.70 to 1.0kg/sqm using mechanical means,

13 Providing and appliying tack coat with 4875.00 One 11.81

bitumen emulsion RS1 on prepared surface Sqm

of granular Base including clearing of road

surface and spraying primer at the rate of

0.20kg/sqm using mechanical means,

14 Providing, Laying and Rolling of Built up 4875.00 One 191.09

Spray grout in one layers Using Emulsion Sqm

RS1 tack coat at the rate of 4.00Kg/10sqm on

WBM surface (As per IRC-16) with

spreading stone aggregate at the rate of

0.50cum/10Sqm. And spraying bitumen at

the rate of 15kg/10sqm. For first layer and

spreading 0.13cum/10sqm. of key aggregate

on top accordanace with the requirement of

specification, incuding cost of stone

aggregate, bitumen, consolidation with

roller, necessary firewood, oil lubricats,

labour charges, machineries, tools etc.

Item Description of Item (With brief specification Quantity Unit Rate Amount

No. and reference to book of Specification)

15 Providing and laying bitumenous grout 365.70 One 2339.56

37.50mm thick using bulk Emulsion RS1 for MT

tack coat at the rate of 2.50kg/10sqm on

Bitumin surfacer and using BT chips for

required gradation with the asphalt of grade

VG-30 at the rate of 1.99% i.e 19.90kg/MT by

weight of mix including heating and mixing

in drum mix plant , transporting the mix and

spreading the same by paver finisher and

consolidation as per MOST specification

including cost of all materials fuel, labours,

tools and plants etc. using contractor's own

drum mix plant etc. complete.

16 Providing, laying and rolling 37.50mm thick 402.20 One 3008.38

compacted bitumenous Macadam (B.M.) in MT

one layer with B.T. aggregates as specified

and using Emulsion RS1 for tack coat at the

rate of 2.50kg/10sqm (As per IRC-16) and

using bitumen for mixing with agg. at the

rate of 3.40% i.e 34.00kg/MT of total mix

including mixing in Drum mix plant and

spreading the same by paver finisher and

consolidation with vibratory roller including

necessary including cost of hire charges,

firewood, oil, lubricants, labour charges, etc.

by using constractor's own Drum mix plant,

machineries and equipment, tools etc.

complete in accordanace with the

requirement of sepcification.

Item Description of Item (With brief specification Quantity Unit Rate Amount

No. and reference to book of Specification)

17 Providing, laying and rolling 50mm thick 536.30 One 2977.27

compacted bitumenous Macadam (B.M.) in MT

one layer with B.T. aggregates as specified

and using Emulsion RS1 for tack coat at the

rate of 2.50kg/10sqm (As per IRC-16) and

using bitumen for mixing with agg. at the

rate of 3.40% i.e 34.00kg/MT of total mix

including mixing in Drum mix plant and

spreading the same by paver finisher and

consolidation with vibratory roller including

necessary including cost of hire charges,

firewood, oil, lubricants, labour charges, etc.

by using constractor's own Drum mix plant,

machineries and equipment, tools etc.

complete in accordanace with the

requirement of sepcification.

18 Providing and laying and rolling of 20mm 225.00 One 3588.22

Compacted mix seal surface with B.T. and MT

aggregate as spedified using bitumen Grade

VG-30 for mixing with aggregate at the rate

of 5.10% i.e 51.00Kg/MT of total mix

including heating and mixing in drum mix

plant and spreading the same by paver

finisher and consolidation with vibratory

roller including necessary firewood, oil,

lubricants, labour charges using contractor's

own drum mix plant, machineries and

equipment, tools etc including flushing of

sand 0.27cum/10sqm etc. complete in

accordance with the requirement of

Item Description of Item (With brief specification Quantity Unit Rate Amount

No. and reference to book of Specification)

19 Providing, laying and rolling of 25mm thick 255.94 One 2995.15

using asphalt viscosity grade of VG-30 open MT

graded premix bituminous carpet with B.T

aggregates as specified and using bulk

Emulsion RS1 for tack coat at the rate of

2.50kg/10sqm on B.T.Surface (As per IRC-

16) and using bitumen for mixing with

aggregate at the rate of 3.36% i.e

33.60kg/MT. of total mix including heating

and mixing in drum mix plant, spreading the

same with paver finisher and consolidation

with vibratory roller including necessary

firewood, oil, lubricants, labour charges etc.

using equipment tools etc. completed in

accordance with the requirement of

20 Providing and laying seal coat using Bitumin 132.96 One 3308.25

grade VG-30 with B.T. aggregate as specified MT

using aggregate at the rate of

0.18cum/10sqm. And bitumen for mixing

with aggregate at the rate of 4.5% i.e

45.00kg/MT of total mix including heating

and mixing in drum mix plant and spreading

the same by paver finisher and consolidation

with vibratory roller including necessary

using contractor's own drum mix plant,

machineries and equipment, tools etc.

complete in accordanace with the

requirement of specification.

21 Providing and laying rubble for apron (Each 750.00 One 1101.22

stone weighting not less than 40kg) Cum

including and packing and filling in the

interstices with quarry spall.

22 Providing and filling in foundation with 375.00 One 3359.92

ordinary cement concrete M-100 mix and Cum

providing necessary vertical pin headers

incl. Formwork, vibrating, ramming and

curing complete.

Item Description of Item (With brief specification Quantity Unit Rate Amount

No. and reference to book of Specification)

23 Construction of concrete road using tremix 750.00 One 6845.38

system with 20cm thick controlled M-250 Cum

concrete mixing conplast P-211 water

reduction admixure @ 100ml/bag of cement

and hardner 62.50ml. /bag using fixing and

removing "C" channels of required road

depth levelling if placed concrte with surface

vibrator, finishing the surface with power

floater and towel tight brooming as directed

with providing expantion joints 20x200mm

and contraction joints 20x20mm using

concrete cutter machine etc. complete.

24 Dry Lean Cement Concrete Sub base 375.00 One 3028.68

(Construction of dry lean cement concrete Cum

Sub- base over a prepared sub-grade with

coarse and fine aggregate conforming to IS:

383, the size of coarse aggregate not

exceeding 25 mm, aggregate cement ratio not

to exceed 15:1, aggregate gradation after

blending to be as per table 600-1, cement

content not to be less than 220 kg/cum,

optimum moisture content to be determined

during trial length construction, concrete

strength not to be less than 10 Mpa at 7 days,

mixed in a batching plant, transported to

site, laid with a paver with electronic sensor,

compacting with 8-10 tonnes vibratory roller,

finishing and curing.

Item Description of Item (With brief specification Quantity Unit Rate Amount

No. and reference to book of Specification)

25 Cement Concrete Pavement M-25 750.00 One 7457.03

(Construction of un- reinforced, dowel Cum

jointed, plain cement concrete pavement

over a prepared sub base with 53 grade

cement @ 380kg per cum, coarse and fine

aggregate conforming to IS 383, maximum

size of coarse aggregate not exceeding

mm, mixed in a batching and mixing plant as

per approved mix design, transported to site,

laid with a fixed form or slip form paver,

spread, compacted and finished in a

continuous operation including provision of

contraction, expansion, construction and

longitudinal joints, joint filler, separation

membrane, sealant primer, joint sealant,

debonding strip, dowel bar, tie rod,

admixtures as approved,curing compund

finishing the lines and grade as per drwaing.

26 Providing and casting in situ Contolled 750.00 One 5247.13

cement concrete- M-200 for average Cum

75/150mm thick wearing coat laid as

directed incuding. tamping, vibrating,

finishing, curring and filling in joints with

bitumen complete.

27 Providing and Fixing in position FE- 26.250 One 73243.01

500/500D TMT bar reinforcement including MT

cutting, bending, hooking, and tying

complete as per detailed drawaing (A)RCC

kerb (B) RCC Footpath (B) RCC Solid Slab/

App. Slab / Wearing coat.

28 Providing and fixing pre-cast Rubber Dye / 1312.50 One 705.12

steel Dye inter locking concrete block 60mm Sqm

thick with grade of concrete M300 pnumatic

compressed / vibrated mechanically and as

per approved design Confirming to IS

: 2006 including 35 mm Sand layer for

levelling and filling the joint with sand in

proper line and level as per guidlines of IRC

: SP 63-2018 etc. Complete.

Item Description of Item (With brief specification Quantity Unit Rate Amount

No. and reference to book of Specification)

29 Supplying and fixing reinforced concrete 50.00 One 659.99

heavy duty non presure pipes with collars Rmt.

for culverts carrying heavy traffic as per IS

458-1991 specification including setting and

joinng the pipes in C.M. 1:2 watering and

laying (to level or slope) of I.S. Class NP-3 of

following internal diameter with all lead and

lift. (i) 300mm Dia.

30 Supplying and fixing reinforced concrete 50.00 One 1968.37

heavy duty non presure pipes with collars Rmt.

for culverts carrying heavy traffic as per IS

458-1991 specification including setting and

joinng the pipes in C.M. 1:2 watering and

laying (to level or slope) of I.S. Class NP-3 of

following internal diameter with all lead and

lift. (i) 600mm Dia.

31 Supplying and fixing reinforced concrete 50.00 One 3469.25

heavy duty non presure pipes with collars Rmt.

for culverts carrying heavy traffic as per IS

458-1991 specification including setting and

joinng the pipes in C.M. 1:2 watering and

laying (to level or slope) of I.S. Class NP-3 of

following internal diameter with all lead and

lift. (i) 900mm Dia.

32 Providing and fixing Precast cement concrete 7.00 One 356.49

Hectometer as per IRC type design incl. No

painting, lettering etc. fixing in C.C. 1:5:10.

33 Providing and fixing Precast cement concrete 300.00 One 350.80

Guard stone as per I.R.C. type design No

including white washing etc. complete.

Fixing in C.C.1:5:10.

34 Providing and fixing ordinary Kilometer 2.00 One 704.33

stone of pre-cast C.C. 1:2:4 including No

necessary reinforcement as per I.R.C. type

design in C..C. 1:4:8 including painting

lettering etc. complete. (For ODR, VR)

35 Providing and fixing 5th Kilometer stone of 1.00 One 1935.14

pre-cast C.C. 1:2:4 including necessary No

reinforcement as per I.R.C. type design in

C..C. 1:4:8 including painting lettering etc.

Item Description of Item (With brief specification Quantity Unit Rate Amount

No. and reference to book of Specification)

36 Providing and fixing Indicator stone of 65.00 One 343.26

approve stone as per I.R.C. type design in No

C.C. 1:4:8 including white washing etc.

complete Fixing in Earth

37 Village/Bump Ahead sign. : Providing and fixing 5.00 One 5045.36

sign boards made out of 2mm Aluminium sheet size No

90x60 cms. Rectangle as per the design of IRC-67-1977

pre treated with phospheting process and acid etching

coated with one coat of apoxy primer and two coats of

best quality epoxy paint reflectorised with retro

reflective sheeting as per latest MOST specification

letter and numbers should be as per IRC:30-1968,

Mt. long (2 nos) stand post and frame fabricated from

suitable size iron angle of 50x50x5mm, painted with

best quality epoxy coating in black and white bends,

the details of symbole on inscription/ numerals for

each board shall be as per the instruction of the

Engineer in charge. The fixing at site shall be in C.C

1:2:4 block of size 45x45x60cms. for each leg including

excavation curring etc. complete under the

supervision of engineer in charge (A) Engineer Grade.

38 Informatory Signs :-Providing and fixing sing boards 5.00 One 3856.89

made out of 2mm aluminium sheet; size 80 x 60cms. No

rectangle as per the design of IRC-67-1977 pre treated

with phospheting process & acid teching; coated with

one coat of epoxyprimer and two coats of best

qualityepoxy paint; reflectorised with retro refiective

sheeting as per latest M.O.S.T. Specifications; 3.1m

long stand postand frame fabricated from suitable

sizeiron angle of 35 x 35 x 3mm75x75x6mm as

required; painted with best qualityepoxy coatings in

black and whitebends. the details of symbol for

eachboard shall details of symbol for eachboard shall

be as per the instruction ofengineer in charge. The

fixing at site shall be in 1:2:4 CC block of size 45 x45 x

60cms. for each leg. including excavation curing tec.

complete under the supervision of engineer in

charge.(A) Engineer Grade(VR)...

Item Description of Item (With brief specification Quantity Unit Rate Amount

No. and reference to book of Specification)

39 Hazard Marker sign : 10.00 One 2423.73

Providing and Fixing sign boards made out of 2mm No

aluminum sheet : size 90*30 cms. rectangle as per

design / Drawing attached (IRC). Pretreated with

phospheting process and acid etching : coated with

one coat of epoxy primer and two coats of best

quality epoxy paint: reflectorised with retro reflective

sheeting as per latest M.O.S.T specification: 3.1 M.

long (2 nos) stand post and frame fabricated from

suitable size iron angle of 35*35*3mm and 50*50*5mm

: painted with best quality epoxy coatings in black and

white bends the details of symbole or inscription /

numerals for each board shall be as per the instruction

of engineer in charge the fixing at site shall be in 1:2:4

CC block of size 45*45*60 cms for each leg: including

excvation curing etc. comp.under the supervision of

engineer-in-charge.(B) Engineering Grade

40 Chevron sign :-Providing and fixing sign boards made 40.00 One 3711.75

out of 1.5mm aluminium sheet / 3mm ACP No

(Aluminum composite Panel); size 60x50cm

rectangular as per design of IRC-67-2012. Pre treated

with phospheting process & acid etching; coated with

one coat of epoxy primer and two coats of best quality

epoxy paint ; reflectorised with High Intensity

Prismatic Grade retro refiectivesheeting of Type-4 as

per ASTM D-4956 and latest M.O.S.T.Specifications;

3.3 mtr long stand post of Iron Angle 75 x 75 x 6mm /

65NB Circular MS Pipe as required and frame

fabricated from suitable size iron angle of35x35x3mm;

painted with bestquality epoxy coatings in black and

white bends. the details of symbol or inscription /

numerals for each board shall be as per the instruction

of engineer in charge. The fixing at site shall be in 1:2:4

CC blockof size 45 x 45 x 60 Cms. for each leg

including excavation, curing etc.complete under the

supervision of engineer in charge. A warranty for

years for the Retro reflective sheeting from original

manufacturer & a certified copy of 3 year outdoor

exposure test report from third party test lab for the

product offered shall be submitted by contractor. (A)

Class-B Type-4 Retro Reflective sheeting

Item Description of Item (With brief specification Quantity Unit Rate Amount

No. and reference to book of Specification)

41 Direction sign (Junction board):-Providing and fixing 5.00 One 14831.70

sing boards made out of 2mm aluminium sheet; size No

244 x 122cms. rectangle as as per the design of IRC-67-

1977 pre treated with phospheting process & acid

etching; coated with one coat of epoxy primer and two

coats of best quality epoxy paint; reflectorised with

retro refiective sheeting as per latest M.O.S.T.

Specifications; Letters and numerals should be as per

IRC-30-1968, 3.1m long (2 nos) stand post and frame

fabricated from suitable size iron angle of 50 x 50 x

5mm 75x75x6mm as required; painted with best

quality epoxy coatings in black and white bends. the

details of symbol or inscription / numerals for each

board shall be as per the instruction of engineer in

charge. The fixing at site shall be in 1:2:4 CC block of

size 45 x 45 x 60cms. for each leg. including excavation

curing etc. complete under the supervision of engineer

in charge.(A) Engineer Grade(VR)...

42 Route marker sign :-Providing & fixing sign boards 5.00 One 3744.67

made out of 2mm aluminium sheet, size 60x45cms. No

rectangle plus 30x25cms additional plate as per the

attached drawing (IRC) pre treated with phospheting

process & acid etching. coated with one coat of epoxy

primer and two coats of best quality epoxy paint

reflectorised with retro sheeting as per latest M.O.S.T.

Specifications ; 3.1m long stand post and frame

fabricated from iron angle of 35 x 35 x 3mm

75x75x6mm as required, painted with best quality

epoxy coating in black and white bends The details of

numerals for each board shall be as per the instruction

of engineer in charge. The fixing at site shall be in 1:2:4

CC block of size 45 x 45x 60cms. for each leg,

including excavation curing etc. complete under the

supervision of engineer in charge.(A) Engineer

Item Description of Item (With brief specification Quantity Unit Rate Amount

No. and reference to book of Specification)

43 Cautionary Warning Sign : Providing and fixing sign 5.00 One 3808.65

boards made out of 2mm Aluminium sheet size No

90x90x90 cms. Equilateral treangle as per the design of

IRC-67-1977 pre treated with phospheting process and

acid etching coated with one coat of apoxy primer and

two coats of best quality epoxy paint reflectorised

with retro reflective sheeting as per latest MOST

specification 3.1 Mt. long stand post and frame

fabricated from suitable size iron angle of

35x35x3mm, 75x75x6mm. as required painted with

best quality epoxy coating in black and white bends

the details of symbole for each board shall be as per

the instruction of Engineer in charge the fixing at site

shall be in 1:2:4 CC block of size 45x45x60cms. for

each leg including excavation curring etc. complete

under the supervision of engineer in charge (A)

Engineering Grade.

44 Citizen's information Board. Providing and fixing of 5.00 One 7393.20

typical MMGSY information board as per instruction. No

Two MS sheets of 3 mm thick, of 900 mm x 750mm

size fixed at top & bottom duly rivetted with MS

angles of 25 x 25 x 5 mm thick M.S angle shall be

welded by two vertical M.S angle of 5 mm thick to

mm x 75 mm of 12 SWG square tubes posts duly

embedded in cement concrete M-15 grade blocks of

600mm x 600mm x 750mm, below ground level. The

letters & figure of any shade reflectorised with High

Intensity Prismatic Grade Retro Reflective Sheeting of

Type-4 as per ASTM D-4956 and latest MORD

specifications; All sections of framed posts and steel

tube will be painted with primer and two coats of

epoxy paints as per drawing Clause 1701 and

Annexure 1700.1 (10.16). (A) Class-B High intensity

Grade Retro Reflective sheeting.

Item Description of Item (With brief specification Quantity Unit Rate Amount

No. and reference to book of Specification)

45 Road Marking with Hot Applied paints with 546.00 One 367.72

reflectorising glass beads on bitumin surface Sqm

providing and laying a hot applied thermoplasting

compund 2.5mm thick including reflectorising glass

beads @250 gm per sq.mtr area, thickness of 2.5mm is

excluding of surface applied glass beads as per IRC:35-

2015 the finished surface to be level, uniform and free

from streaks and holes, zebra

patta/bump/centerline/edge line/ cut patta. the

while color marking should provide liminance

coefficient on cement road shall be min.

mcd/m2/lux and asphalt road shall be min

mcd/m2/lux during the survice life during the date

the marking should meet the performanace criteria for

night time reflectivity, wet reflectivity and skid

resistance as mentioned in the section-15 of IRC 35-

2015 warranty for retroreflectivity shall be two years.

46 Cate eye / road stud/ RPM : Supplying 217.00 One 326.23

Raised Pavement markers of polycarbonate No

and ABS moulded body and reflective panels

with micro prismatic lens (No glass bead

lens) capable of providing total internal

reflection of the light entering the lens face

and shall support a load of 13635 kgs. tested

in accordanace to ASTM D 4280 type H and

complying to specification of category A of

MORTH circular No RW/NH/33023/10-97-

DO III Dt. 11-06-1997. the height, width and

length shall be exeed 20mm, 130mm and

130mm and with minimum reflective area of

13sqcm on each side and the slope to the

base shall be 35+/-5 degree. the body of the

marker should having finger grip for easy

and accurate placement and application with

epoxy /bituminous adhesive as

recommended by the manufacturer of the

marker. the colour of the marker should be

as per the IRC:35-2015 and as directed by

Engineer-in-charge.

Item Description of Item (With brief specification Quantity Unit Rate Amount

No. and reference to book of Specification)

47 Providing and erecting a "W" metal crash 500.00 One 3723.46

barrier comprising of 3mm thick currugated Rmt.

sheet metal beam rail, 70cm above

Road/Ground level, fixed on ISMC series

channel vertical post, 150x75x5mm spaced

2m center to center, 1.8m high, 1.1m below

ground/road level, all steel parts and

fitments to be galavanized by hot dip

process, all fittings to conform to IS:1367 and

IS:1364 metal beam rail to be fixed on the

vertical post with a spacer of channel section

150x75x5mm, 330mm long complete as per

Rupees Three Crore Seventy Eight Lakh(s) Thirty Five Thousand Eight Hundred

Forty Four Only

I \ We am \ are willing to carry out the work at ……………………… % above \ bellow percent

( Should be written in figures and words ) of the estimated rate mentioned above. Amount of My

\ Our tender works put as under.

* Estimated Amount * Estimated Amount

Put to tender Rs…………………… Put to tender Rs……………………

Deduct……..……..% Add……..……..%

In words………………….……………… In words………………….………………

1.The Contractor shall exhibit a board with detailed specification and details of work as directed

by the Engineer-In-Charge for which no extra payment shall be made.

2.The labour cess will be deducted as per prevailing rules i.e. 1% of the work done.

3.GST and Income tax TDS will be deducted at a source while making payments of bills

4.In all R.C.C. Items in Rate Analysis Standard Cement Consumption has been taken as per

Govt. G.R.: PRC-10/2017 Cement Consumption/16/C Date:11/05/2017 as stated in

S.O.R. therefore in R.C.C. items where there is a change as per actual mix design the cost

of difference of cement consumption have been deducted from the rate of original item at the

rate of input rate mentioned in all the tender.

Signature of Contractor.

Deputy Executive Engineer Executive Engineer

Panchayat R&B Sub Division Panchayat R&B Division