Repairs and Renovation to the Office building at KVK, Nellore

Repairs and Renovation to the Office Building at KVK, Nellore.

Dismantling including stacking of stacking materials and disposal of unserviceable materials with 100m lead as directed by the Executive Engineer duly taking actual pre-measurements before dismantling including all labour charges etc., complete for finished item of work.

Flooring with double charged vitrified tiles of size 600 x 600 mm and thickness between 8-10 mm 1st quality conforming to IS:13711, IS:13712, IS:13630 (Parts 1 to 15) of any colour and finish in all shades and designs with borders and design as per the approved flooring pattern as directed by the Engineer-In -Charge, set over a base coat of CM (1:8) prop. 12mm thick using screened sand over CC bed already laid or RCC roof slab, including neat cement slurry of honey like consistency spread @ 3.3 kgs per sqm. and jointed neatly with white cement paste to full depth mixed with pigment of matching shade including cost and conveyance of all materials like cement, sand, water, tiles, white cement etc., to site (excluding cost of C.C. bed) including cost of base coat and all labour charges for mixing of cement mortar, laying tiles to required slope as directed by the Engineer- in-charge etc., complete for finished item of work.

Providing skirting to internal walls with double charged porcelain vitrified tiles of 8 to 10mm thick of any colour and finish in all shades and designs. length equal to flooring tiles, set over base coat of CM(1:5) 12 mm thick using screened sand with cement slurry of honey like consistency spread at the rate of 3.30 kgs per sqm and jointing with white cement paste mixed with pigment of matching shadę to full depth, including cost of all materials like tiles, cement, sand and water etc., and complete for finished item of work.

Supply and fixing Gyp Board Suspended regular single layer false ceiling (GS-MFSC-4.1 as per India Gypsum) suing 12.5mm thick Gyp Board conforming to IS 2095 – 1982 fixing to Gyp steel GI perimeter channels of size 20mm x 27mm x 30mm (web) of 0.55mm thick along the perimeter of ceiling screw fixed to brick work / partition at 610mm c/c and suspending the frame work using Intermediate channels (45mm x 15mm x 15mm x 0.9mm) from soffit at 1220mm c/c with ceiling angle (25mm x 10mm x 0.55mm) fixed with GI cleat and steel expansion fasteners & connecting clip to the ceiling channels (with knurled web of 51.5mm x 26mm x 10.5mm x 0.55mm) fixed in direction perpendicular to the intermediate channel at 457mm c/c and fixing the 12.5mm tapered edge Gypboard with 25mm drywall screws at 230mm c/c & jointing and finishing using joint compound and paper tape to have a flush look including filling the tapered & square edges with jointing compound, two coats of drywall top coat complete for finished item of work as per India Gypsum Ltd specification.

Providing and applying wall putty of white cement or polymer or cement based of averaged thickness of 1 to 2mm thickness over plastered surface to prepare the surface even and smooth after thoroughly brushing the surface to remove all dirt and remains of loose powdered materials, applying emery paper, sand the surface, clean & wipe off loose dust, applying knifing paste filler by putty knife / muslin pad, air dry for 2 - 3 hrs, sand with 180 and 320 No., emery paper for the surface preparation including cost and conveyance of all materials to work site and all operational, incidental, labour charges etc., complete for finished item of work in all floors for Internal walls.

Supply & application of two coats of acrylic emulsion paint of approved brand having VOC (Volatile Organic Compound) content less than 50 grams/litre for internal walls including cost and conveyance of all materials to site, incidental, Operational and all labour charges etc., complete for finished item of work in all floors.

Providing synthetic enamel paint to old wood work and flush shutters with two coats of Grade II VOC(Volatile Organic Compound) content less than 50 grams / litre of approved brand and shade including cost and conveyance of all materials to site, labour charges including applying sand paper on lappam coats for neat finish excluding sales & other taxes on cost of all materials etc., complete in all floors as directed by the department

Supply & application of two coats of acrylic exterior emulsion paint of approved brand having VOC (Volatile Organic Compound) content less than 50 grams/litre for exterior walls including cost and conveyance of all materials to site, incidental, operational and all labour charges etc., complete for finished item of work in all floors.

Brick masonry for panel walls in super structure with cement mortar (1:6) prop (Cement:sand) using common burnt clay bricks of class as per Table-1 of IS:1077-1992, Non-Modular or traditional size 23 x 11 x 7 cm from approved source having minimum crushing strength of 40 Kg/sqm including cost and conveyance of all materials like cement, screened sand, bricks, water etc., to site, and excluding sales and other taxes on materials such as labour charges like mixing cement mortar, scaffolding charges, constructing masonry, lift charges, curing etc., and overheads & contractor profit complete for finished item of work.

Plastering 12mm thick in single coat with CM (1:5) prop. including cost and conveyance of all materials like cement, sand, water etc., to site, excluding seigniorage charges, sales & other taxes on all materials and including all operational, incidental charges on materials and including cost of all labour charges for mixing mortar, finishing, scaffolding, lift charges, curing, including cutting Grooves as directed by Engineer - in - charge etc., complete for finished item of work.

25mm shelves: Reinforced cement concrete M 20 Nominal mix using 6-12mm size hard granite machine crushed graded metal (coarse aggregate - as per IS 383-1970 and IS 2386 part1 to Part 8) from approved quarry, using a minimum quantity of 330 kgs. Of cement per 1 cum of concrete using concrete mixer 10/7 cft (0.2/0.8cum) capacity including cost and conveyance of all materials like cement, fine aggregate, water etc., to site including centring, shuttering, labour charges for machine mixing, hire charges of concrete mixer, laying concrte, lift charges, curing etc., and complete for finished item of work.

50mm shelves: Reinforced cement concrete M 20 Nominal mix using 6-12mm size hard granite machine crushed graded metal (coarse aggregate - as per IS 383-1970 and IS 2386 part1 to Part 8) from approved quarry, using a minimum quantity of 330 kgs. Of cement per 1 cum of concrete using concrete mixer 10/7 cft (0.2/0.8cum) capacity including cost and conveyance of all materials like cement, fine aggregate, water etc., to site including centring, shuttering, labour charges for machine mixing, hire charges of concrete mixer, laying concrte, lift charges, curing etc., and complete for finished item of work.

Providing Thermo Mechanically Treated (TMT) (Fe 500 grade as per IS 1786-1979) of different diameters for RCC works, including labour charges for straightening, cutting, bending to required sizes and shapes, placing in position with cover blocks of approved materials and size and tying and lap-splicing with binding wire of 18 SWG, forming grills for reinforcement work as per approved designs and drawings, including cost and conveyance of steel bars, including all wastages such as overlaps, couplings, chairs, spacer bars including cost and conveyance of binding wire, cover blocks and all incidental, operational, labour charges such as cutting, bending, placing in position, tying etc., complete for finished item of work. (APSS No.126)

Flooring with 18mm to 20 mm thick high polished Telephone black Granite stone slab (black colour) of approved quality and shade by Engineer-in-charge laid over base coat of CM (1:8) prop. 20mm thick using screened sand over CC bed already laid / R.C.C. roof slab including neat cement slurry of honey like consistency spread at the rate of 3.3 Kgs per sqm and filling the joints with white cement paste mixed with pigment of matching shade including cost and conveyance of all materials like cement, sand, water, granite slabs etc., to work site and all operational, incidental labour & lift charges, , polishing charges, cost of base coat and complete for finished item of work for platforms.

Full rounding the edges of granite slabs of any thickness and polishing the same including the labour and machinery hire charges and conveyance to work site complete as directed by the Engineer in Charge.