REPAIR TO JOINERY TILLING SANITARY FITTING CGI SHEET PLASTER PLINTH PROTECTION BLOCK WALLING CEILING SUNKEN FLOOR AT 105 AD REGT 953 WKSP SIG REGT AND 55 SUP DEPOT UNDER AGE BR WEST AT GE DEHU ROAD

Amount

Dismantling plain or corrugated steel sheeting any gauge, any thickness including Nainital or similar pattern roof covering , in wall clading and velley gutters complete all as specified and directed.

Dismantling of wrought iron or mild steel work any description and fixed in any position complete all as specified and directed.

M&L rolled sections as in main and cross beams, hip rafters; purlins where connected to common rafters and running rails and guides for sliding doors; fixed witjh angle cleats or other connecting plates Fe 410 W (gde E 250 ) quality A including a shop coat of zink chromate primer complete all as specified and as directed.

S & F 0.50mm thick pre painted/coloured galvalum aluminium zinc coating GI based corrugated steel sheet of any colour in roofing having tensile strength 550 Mpa fixed with self tapping screws all as specifeed.

All as per item No. 5 above but plain sheet fixed in valley gutter / ridge complete all as specified and as directed.

Dismantling wall & ceilling boards(fibre pulp insulation etc) or insulation boards/ slabs/blankets, any thickness including cover fillets complete all as specified and as directed.

S & F 12mm thick Gypsum board for ceiling, insulation and accoustic purpose 60x60cm in size fixed with screws with staples incl aluminium snap grid frame work 605x605 mm in flat/slopting ceiling with aluminium anodised grid work 35.60x23.60x1.60mm main Tee 23.60x23.60x1.60mm cross section and 26x26x1.60mm angle including 3mm dia GI wire suspender of suitable length aluminium cleats etc complete all as specified and directed.

Taking out existing water proofing treatment including cement plaster(any no of layers) on roof surfaces, cleaning the surfaces and removing the debris outside MD land complete all as specified and as directed.

M&L for rendering 10mm thick in CM 1:4 on concrete surfaces / slabs with admixture of integral water proofing compound as per manufacture instruction by weight of cement including filling depressions if any, to receive water proofing treatment (WPC shall be measured & paid seperately) complete all as specified and as directed.

Supply only Liquid water proofing compound .

M/L for cleaning the plastered / concrete surfaces with wire brushes and applying water proofing treatment as under :- (a) Apply one coat of oil bituminous primer @ 0.20 kg/Sqm over concrete surface. (b) Laying APP Polimerised modfied membrane not less than 3 mm thick and weighing not less than 3.5 kg per Sqm by torch applicaton method. (c) The overlap for APP membrane shall be 75 mm on longitudinal direction and 100 mm on transverse direction. (d) Finally applying a coat of solar reflective bitumiious aluminium paint @ 0.15 Kg/Sqm over the membrane.

Disconnecting existing PVC water tanks of capacity 500 litres.

S & F rotational moulded polyethylene double layer water tanks (vertical cylindrical with close top) as per IS 12701: 1996 of 500 litres capacity hoisted and fixed in position including provision of 20 mm /15 mm dia medium grade GI pipe spouts for connecting inlet, outlet, over flow and washout pipes all as specified and as directed.

Cleaning and removing all scale and dirt etc from tanks and mouth of circulating pipes etc of water tanks of capacity 500 Ltr complete all as specified and as directed.

Taking up or down steel tubing and connections of 15 mm bore of pipe complete all as specified and as directed.

Taking up or down steel tubing and connections of 20 mm bore of pipe complete all as specified and as directed.

Fixing only 15 mm bore GI pipe medium grade with all fittings and fixtures and fixed to wall, ceiling, floor including cleaning the pipe retrieved from item No 15 above, complete all as specified and as directed.

Fixing only 20 mm bore GI pipe medium grade with all fittings and fixtures and fixed to wall, ceiling, floor including cleaning the pipe retrieved from item No 16 above, complete all as specified and as directed.

M & L for 15 mm bore GI pipe medium grade with all fittings and fixtures and fixed to wall, ceiling, floor complete all as specified and as directed.

M & L for 20 mm bore GI pipe medium grade with all fittings and fixtures and fixed to wall, ceiling, floor complete all as specified and as directed.

S & F in repairs ball valves high pressure of PTMT with epoxy coated Aluminium rod & high density plastic ball screwed for iron pipe of 20 mm bore and fixed (minimum weight 210 gms) complete all as specified and as directed.

S & F in repairs 15 mm dia stop valves cast copper alloy, screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipe or union all as specified and as directed.

Demolition of brick or stone /boulder masnory, built in CM 1:6 complete all as specified.

M&L fo r brick work with sub class 'B' bricks traight or curved on plan exc 6 m mean radius built in CM 1:6 complete all as specified.

M&L for rendring in patches 15mm thick thick in CM 1:4 on fair faces of brick work or concrete wall surfaces finishing the surfaces even and smooth without using extra cement complete and applying two coat of cement base paint to match the existing surfaces including taking down existing plaster, all as specified and as directed Note:- Work to be carried out upto a hight of 7.50 mtr and rate shall be inclusive of all necessary scaffolding

Taking down cement plaster on brick or stone walls/ceiling etc. including raking out joints, hacking for key, scrubbing down with water, etc. complete all as specified and as directed.

M&L for rendering cement plaster 10 mm thick in CM 1:6 on fair faces of brick walls surfaces finished even and smooth w/o using extra cement complete all as specified and as directed.

M & L for Rendering 5 mm thick cement plaster on concrete surface of ceiling in cement mortor 1:3 surfaces shall be even and smooth without using extra cement complete all as specified and as directed.

M&L for rendering cement plaster 15 mm thick in CM 1:4 on fair faces of brick work or conrete wall surfaces finishing the surfaces even and smooth without using extra cement complete all as specified and as directed.

M & L for Preparation of newly plastered surfaces of wall and appling two coats of oil bound distemper over a coat of primer including 3mm thick wall care putty complete all as specified and as directed.

M & L for Preparation of newly plastered surfaces of wall and appling two coats of cement base paint complete all as specified and as directed.

M&L for preparation of newly plastered surfaces of ceiling and applying three coat of white washing complete all as specified and as directed.

S&F in repairs 15 mm dia bib taps cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass furrule and fixed for 15mm dia pipe complete all as specified and as directed.

S & F in repairs 15 mm dia pillar taps fancy type cromium plated with capstan heads, chromium plated, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed for 15 mm dia pipe complete all as specified and as directed.

S & F in repairs 15 mm dia Brass cromium plated shower rose of 125 mm long leg complete all as specified and as directed.

S&F in repairsGrating round 100 mm size of PTMT (Minimum weight 25gms.) complete all as specified and as directed.

S/F in repairs Vitreous china wash basin white flat back size 550 x 400mm including waste pipe and plug and porcelain stopper and brackets incl cutting for and pinning in ends of brackets or erecting stand along with 32mm dia CP waste coupling and PVC waste pipe complete all as directed.

S&F in repairs vitreous china squatting pan ORRISA PATTERN size 580x440mm white with integral foot rests excluding flushing cistern & fush pipe complete all as specified and as directed. .

S & F in repairs for PVC connection pipe 15mm dia with PTMT nuts of length 450mm complete all as specified and as directed.

S&F in repairs PVC low/high level flushing cristern white 10 litre capacity incl PVC inlet pipe with brass check low level full both sides alongwith PVC flush pipe 32mm dia jointed to WC and handle incl brackets all as directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding/backing

M & L non skid coloured ceramic tiles 7 to 8 mm thick area of each tiles exceeding 0.06 sqm but not exceeding 0.11 sqm , in floors, etc.set and jointed in neat cement slurry and pointed in white or coloured cement to match. Including 15 mm thick screed bed or bedding layer in cement mortar 1:6 complete.

M & L non skid coloured ceramic tiles 7 to 8 mm thick area of each tiles exceeding 0.18 sqm but not exceeding 0.38 sqm , in floors, etc.set and jointed in neat cement slurry and pointed in white or coloured cement to match including 15 mm thick screed bed or bedding layer in cement mortar 1:6 complete.

M & L for Non skid coloured ceramic tiles 7 to 8 mm thick area of each tiles exceeding 0.18 sqm but not exceeding 0.38 sqm, as in skirting set and jointed in neat cement slurry and pointed in white or coloured cement to match including backing coat 10 mm thick in CM 1:4 all as direced.

M&L for vitrified coloured tiles 10mm thick (square/rectangular) polished area of each tile exc. 0.36 sqm but n exc 0.42 sqm in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including15 mm th screed bed in CM 1:6 complete all as specified and as directed.

Ditto as per item No 46 above but on skirting over and including 10 mm thick backing coat in CM 1:4 complete all as specified and as directed.

M & L Glazed ceramic tiles in vertical surface 450mm x300x7mm thick, set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of the tiles incl backing coat 10mm thick in CM 1:4 all as direced.

Demolition of cement concrete ( unreinforced) in ground floors and paving n exc 15 cm thickness (below or above ground level) complete all as specified and as directed.

M & L for cement concrete Type C2 1:3:6 (using 40mm graded aggregates) as in plinth protection 75 mm thick finished top surface even and smooth without using extra cement complete all as specified and as directed.

M & L for 75 mm thick Cement concrete type D-2 1:4:8 (40 mm graded aggregate) as in sub base complete all as specified and as directed.

M & L for Chequered cement concrete tiles of 20 cm x 20cm x 25 mm thick with grey cement and pigment,set and jointed in neat cement slurry in floors including 15 mm thick screed bed or bedding layers in cement mortar 1:6 for laying tiles complete all as specified and as directed.

Demolition of cement concrete (unreinforced) in Suken portion exc.15 cm thickness (below or aboveground level) complete all as specified and directed.

M & L cement conrete 1:7:12 type F2 (uisng 40mm graded aggregate) as in sunken filling complete all as specified and directed.

Dismantling of CI 110/75 mm pipes fixed to walls and floor with all fittings/ accessories complete all as specified and directed.

S&F PVC (SWR) pipes, single socketed, in any length with rubber ring joints fixed to walls, or laid in trenches bore of pipe 110 mm complete all as specified and directed.

S&F.110 mm dia PVC (SWR) bends, any radius with access door complete all as specified and directed.

S&F 110 mm dia PVC (SWR) branch piece (Single Y) equal or unequal complete all as specified and directed.

S&F 110 mm dia PVC (SWR) branch piece double, (double Y) equal or unequal complete all as specified and directed.

S&F 110 mm dia PVC (SWR) vent cowl complete all as specified and directed complete all as specified and directed.

S&F PVC (SWR) pipes, single socketed, in any length with rubber ring joints fixed to walls, or laid in trenches bore of pipe 75 mm complete all as specified and directed.

S&F PVC (SWR) bends any radius, 75mm dia pipe complete all as specified and directed.

S&F PVC (SWR) branch piece, single (single Y) equal or unequal,for 75mm dia pipe ccomplete all as specified and directed.

S&F PVC (SWR) branch piece, double (double Y), equal or unequal,for 75mm dia pipecomplete all as specified and directed.

S&F 75 mm dia PVC (SWR) vent cowl complete all as specified and directed.

Taking down chowkhats or frame with shutter (without taking off shutter from the frames) exc. 1.5 Sqm but n. exc. 4 Sqm each.

–Ditto- as item No 66 above but n.exc. 1.50 sqm each including window and ventilator of any type.

S&F pressed steel door frames with one or more rebates incl necessary fixing lugs, hinges, lock strike plates of size 125 X 60mm

S&F for pressed steel door frames with one or more rebates incl necessary fixing lugs, hinges, lock strike plates of size 105 X 60mm

M/L for PCC 1:3:6 type C0 in door frame filling all as specified and directed.

S & F pre-laminated particle board 18mm thick interior grade prelaminated one side with deocrative choice lamination & other side balancing white lamination, fixed with screws to timber frame work incl external teak wood lippling 6mm thick fixed with nails complete.

S&F continuous Piano type hinges mild steel bright finish or electrogalvanised (width of flap 40 mm when open) complete.

M & L Plywood, grade BWP, 12mm thick,Nos of ply 7, type BB fixed with screws to timber frame work

S&F Hasp and staple 100mm size, aluminium anodised, including bolt to hinge plate and fixed with screw

S&F factory made 35 mm thick plain framed panelled shutter (two panels) with lock rail and panel of 9 mm BWP commercial ply or 12 mm veneered particle board with Commercial veneered on both faces the size of rail and style as per IS-1003 ( Pt-I) kiln seasoned and Chemically pressed of 2nd class hard wood.

S & F factory made 35 mm thick glazed & skeleton shutter of 2nd class hard wood open rebated and prepared to receive gauge (divided into squares with sash bars) edges of framing plain chamfered or rounded, fitted without & fitted beads for securing glass etc, sizes of members of shutters as specified in SSR Pt-I Sec-8 clause 8.23 (a) and fitted to chowkhats complete all as specified.

S & F in repairs galvanised mild steel wire cloth 0.56 mm nominal dia of wire and average width of aperture 1.00mm fixing to steel window with nut bolt.

S & F, Stainless Steel wire cloth ,0.36 mm nominal dia of wire and avg width of aperture 1.40 mm and fixed with tinned tacks or galv, Wire stapples complete all as specified and directed.

S&F aluminium powder coated window sliding type (3 track) with frame size100x35x1.2mm and shutter 39.40x17.70x1.2mm with two glass shutter & one mesh shutter incl necessary jointing cleats glazing clips, rubber packing,and locking arrangement powder coated aluminium snap beading screws including 4mm plain float glass & 0.36 mm dia and 1.4 mm width of aperture SS wire mesh, fittings etc complete all as specified.

S&F in repairs curtain rod 25 mm dia powder coated fancy type complete all as specified and directed.

S&F in repairs brackets fancy type powder coated for 20 mm dia drapery rod complete all as directed.

S&F Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S Square tube, supplying & fixing in opening as per specification & drawing

S&F factory made PVC solid panel door shutter 30mm thick (style) connecting of frame made out of MS tube for top and bottom rail. MS frame shall be coverd withheat moulded plain coour PVC 'C' channel having a PVC sheet strips of 20 mm width stuck inside with solvent cement for stiles and plain colour PVC sheet for top rail, lock rail and bottom rail of either side and as gap insert for toprail and bottom rail panellinn of plain colour PVC to be fitted in the ms frame welded/ sealed in the stiles and rail with suitable PVC sheet and loading and jointed together with solvent cement, supplying and fixing in the frame at site all as directed by Engineer -in -charge.

S & F 150 mm size extruded aluminium alloy handles,fabricated type anodised.

S & F aluminium anodised, barrel tower bolts of extruded section and fixed, length of bolt 150mm

S & F aluminium anodised, barrel tower bolts of extruded section and fixed, length of bolt 100mm

S& F Butt hinges medium weight cold rolled mild steel 100 long complete all as specified and directed

S& F 100 mm Butt hinges, extruded aluminium alloy with galvanised mild steel hinges pin anodised and fixed type B-12 all as specified and directed

S & F aluminium alloy , anodised , sliding door bolt with hasp , staple ( bolt type ) & fixing clips of sheet, cast or extruded section & fixing bolts & sliding bolts of extruded section or cast aluminium alloy & fixed - length of bolt 250 mm

M&L for preparation of new wooden surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide complete all as specified and as directed.

M&L for preparation of New steel surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide complete all as specified and as directed.

RAMESH PATIL

Santhi Enterprises

DR J S CHADHA AND SONS

M/S B.A. GAIKWAD

Star Construction

Samyak Engineers

PREETI ENTERPRISES

S RESHAMSINGH AND SONS

M/S SANDEEP H BHINGARDIVE