Loading
Loading…
Loading…
Tender ID
Tender Value
₹12.1 Cr
EMD Value
₹7.6 L
Closing Date
30 Mar 2026, 3:00 pmClosed
Yes (up to 3 members)
No
Two Packet System
Normal Tender
No
Not Applicable
Lowest to Highest
90 days
Expenditure
Capital (Works)
WORKS
16 conditions · 4 needing a document upload
Financial Eligibility Criteria :- The tenderer must have minimum average annual contractual turnover of V/N or 'V' whichever is less; where V= Advertised value of the tender in crores of Rupees N= Number of years prescribed for completion of work for which bids have been invited. The average annual contractual turnover shall be calculated as an average of "total contractual payments" in the previous three financial years, as per the audited balance sheet. However, in case balance sheet of the previous year is yet to be prepared/ audited, the audited balance sheet of the fourth previous year shall be considered for calculating average annual contractual turnover. The tenderers shall submit requisite information as per Annexure-VIB , along with copies of Audited Balance Sheets duly certified by the Chartered Accountant/ Certificate from Chartered Accountant duly supported by Audited Balance Sheet.
All rates are inclusive of GST and bidders should be registered in GST.
Technical Eligibility Criteria: (a)The tenderer must have successfully completed or substantially completed (Which should have been issued not prior to 60 days of date of invitation of present tender) any one of the following categories of work(s) during last 07 (seven) years, ending last day of month previous to the one in which tender is invited:(i) Three similar works each costing not less than the amount equal to 30% of advertised value of the tender, or (ii) Two similar works each costing not less than the amount equal to 40% of advertised value of the tender, or (iii) One similar work costing not less than the amount equal to 60% of advertised value of the tender.
Note for Item 10.1: Work experience certificate from private individual shall not be considered. However, in addition to work experience certificates issued by any Govt. Organisation, work experience certificate issued by Public listed company having average annual turnover of Rs 500 crore and above in last 3 financial years excluding the current financial year, listed on National Stock Exchange or Bombay Stock Exchange, incorporated/registered at least 5 years prior to the date of closing of tender, shall also be considered provided the work experience certificate has been issued by a person authorized by the Public listed company to issue such certificates. In case tenderer submits work experience certificate issued by public listed company, the tenderer shall also submit along with work experience certificate, the relevant copy of work order, bill of quantities, bill wise details of payment received duly certified by Chartered Accountant, TDS certificates for all payments received and copy of final/last bill paid by company in support of above work experience certificate
Similar nature of work:- " Any bridge work involving fabrication, erection & launching of FOB/ Steel Girders/Composite Girder for Railway, Road Bridges."
13 conditions · 9 needing a document upload
Please enter the percentage of local content in the material being offered. Please enter 0 for fully imported items, and 100 for fully indigenous items. The definition and calculation of local content shall be in accordance with the Make in India policy as incorporated in the tender conditions.
The tenderer shall clearly specify whether the tender is submitted on his own (Proprietary Firm) or on behalf of a Partnership Firm / Company / Joint Venture (JV) / Registered Society / Registered Trust / HUF etc. The tenderer(s) shall enclose the attested copies of the constitution of their concern, and copy of PAN Card along with their tender. Tender Documents in such cases are to be signed by such persons as may be legally competent to sign them on behalf of the firm, company, association, trust or society, as the case may be.(Para 14.1 (see Page-17 of GCC, April-2022) & Tenderer shall submit the documents in support of their constitution of the firm as per Para 14 of GCC, April-2022 (See Page-17 to 19).
As per instructions please attach proforma of ANNEXURE V-A this certificate is to be given by attorney/authorized signatory/each member of partnership firm / Joint Venture (JV)/ Hindu Undivided Family (HUF) / Limited Liability Partnership (LLP) etc.) Non submission of above certificate (s) by the bidder shall result in summarily rejection of his/their bid. It shall be mandatorily incumbent up on the tenderer to identify, state and submit the supporting documents duly self-attested / digitally signed by which they/he is qualifying the Qualifying Criteria mentioned in the Tender Document. Proforma is available in uploaded documents.
Certificate of Information regarding Employment/Partnership etc. of Retired Railway Employees with the tender as per the attached Performa. As per clause No 16 (a) and (b) of GCC Part-I April 2022 corrected up to date. (As per Para 16 of GCC, April2022 (See Page-19 to 20).
Restrictions on the Employment of Retired Engineers of Railway Services Within One Year of their Retirement: As per Para 59.9, of GCC, April-2022 (see Page-91).
Certificate of NO Relative being an employee of Western Railway as per attached Performa.
The tenderer should upload the scan copy of EPFO and ESI registration number. However EPFO and ESI registration would be mandatory and documents towards EPFO and ESI registration must be submitted before execution of the agreement.
In case of Bid Security in the form of Bank Guarantee, the same should be in favor of Sr. DFM Vadodara with the tender for due performance with the stipulation to keep the offer open till such date as specified in the tender, under condition of tender. (GCC April 2022 Part I Instructions to tenderers (ITT) para 5 Bid Security (1) (a,b,c),(2) (3)(i-viii). As per ACS 2 issued vide Rly. Board letter No.2022/CEI/ CT/GCC-2022/Policy date 13.12.2022: (ii) The original Bank Guarantee should be delivered in person to the official nominated as indicated in the tender document within 5 working days before closing date for submission of bids. As pr ACS 5 RB No. 2022/CE-I/CT/GCC-2022/Policy date 20.10.2023:- Para 5(3) II The original bank guarantee should be delivered in person to the official nominated as indicated in the tender document before closing date for submission of bid.(i.e. excluding the last date of submission of bids).
The tenderer whether sole proprietor / a company or a partnership firm / joint venture (JV) / registered society / registered trust / HUF / LLP etc if they want to act through agent or individual partner(s), should submit along with the tender, a copy of power of attorney duly stamped and authenticated by a Notary Public or by Magistrate in favour of the specific person whether he/they be partner(s) of the firm or any other person, specifically authorizing him/them to sign the tender, submit the tender and further to deal with the Tender/ Contract up to the stage of signing the agreement except in case where such specific person is authorized for above purposes through a provision made in the partnership deed / Memorandum of Understanding / Article of Association /Board resolution, failing which tender shall be summarily rejected. As par Para 15 of GCC, April-2022 (see Page-19).
Maintenance period for the work is "The maintenance/warranty period in Civil Engineering works is six months after which the Security Deposit shall be released. FDR for the proportionate amount of schedule of S/I/T/C of lifts can be taken from the successful tenderer after completion of the maintenance/warranty period of Civil Engineering works. The maintenance/warranty period for S/I/T/C of lifts is twenty-four months after which the Security Deposit shall be released. This FDR shall be released after successful completion of the maintenance/ warranty period of lifts" from the certified date of the completion.
Tenderer should submit Valid electrical license for electrical contract to execute electrical portion of work.
Vadodara Division :- Proposed FOBs on new/replacement account with lift at Kosamba, Panoli & Hathuran.
DRM-BRC-201-OF-2025-26
DRM-BRC-201-OF-2025-26
Open
Works - General
18 Months
Vadodara, Gujarat
₹0
₹7.6 L
30 Mar 2026
6 Mar 2026
16 Mar 2026
165 items across 8 schedules · ₹15,52,91,960.59 total
| # | Description | Unit | Qty | Rate | Amount |
|---|---|---|---|---|---|
| 1 | with 'Z' section MS sheet by side in all kinds of mechanically or manually as approved drawing with own arrangement in all respects and of sheet piles after of the work as by engineer in-charge Payment will be made as driven length of pile. | Sqm | 717.00 | 1,068.67 | 7,66,236.39 |
| in excavation by means (Hydraulic Means for and floors of the retaining walls etc. setting out, dressing of ramming of bottom, getting excavated material, back layers with approved and consolidation of the ramming and watering all lift, disposal of up to a lead of 300m, of shoring and strutting labour and material as per drawing and specification as directed in charge. Note: This be used for excavation connection with other works also like side foundation for OHE masts other miscellaneous in connection with Conversion, Doubling, New | — | — | — | — | |
| 2 | soils | cum | 1458.00 | 213.47 | 3,11,239.26 |
| and laying in position concrete of specified Mix f o r miscellaneous side drains, foundation masts and other structures the cost of Cement, and shuttering - All plinth level : | — | — | — | — | |
| 3 | Cement: 1½ coarse (zone-III) : 3 graded stone 20 mm nominal size) | cum | 344.00 | 3,857.51 | 13,26,983.44 |
| 4 | Cement : 3 coarse sand : 6 graded stone 20 mm nominal size) | cum | 55.00 | 4,079.81 | 2,24,389.55 |
| 5 | and laying in position batched, machine mixed machine vibrated Cement of specified grade as per Design Mix (mixed in Concrete Batching/Mixing site or RMC from plants) using 20mm crushed stone aggregate sand of approved RCC raft foundation & including finishing, using in approved (as per IS:9103), to workability without strength and durability as per specifications of the Engineer in N o t e : 1. Payment for reinforcement and shall be made extra relevant item. 2. Plasticiser invariably be used in proportion to increase with minimum quantity of cement for all Design Mix Concrete is specifically approved reasons for not using at the stage of Mix in that case deduction made as per relevant | cum | 310.00 | 4,115.74 | 12,75,879.4 |
| and laying in position batched, machine mixed machine vibrated Cement of specified grade as per Design Mix (mixed in Concrete Batching/Mixing site or RMC from plants) using 20mm crushed stone aggregate sand of approved for the following cement concrete elements up to height from foundation top including finishing, using in approved (as per IS:9103), to workability without strength and durability as per specifications of the Engineer in N o t e : 1. Payment for reinforcement and shall be made extra relevant item. 2. Plasticiser invariably be used in proportion to increase with minimum quantity of cement for all Design Mix Concrete is specifically approved reasons for not using at the stage of Mix in that case deduction made as per relevant | — | — | — | — | |
| 6 | cap, Pier Cap, Platform & Pedestal cap, Fender wall, wall etc. | cum | 158.00 | 4,306.2 | 6,80,379.6 |
| 7 | and applying two coats or bitumen confirming latest version on the sides of RCC box/slabs @ after cleaning the with all labour and complete job as the Engineer. | Sqm | 43173.00 | 162.33 | 70,08,273.09 |
| and shuttering strutting, propping etc. of form for : | — | — | — | — | |
| 8 | of bridge sub-structures, abutment, wing wall, wall, RCC box type Abutment cap, Pier Inspection Platform & over Pier cap, Fender Diaphragm wall etc. up to ground level | Sqm | 3618.00 | 746.3 | 27,00,113.4 |
| and using Cement at | — | — | — | — | |
| 9 | Portland Cement 53 approved brands/makes | MT | 369.00 | 9,275.03 | 34,22,486.07 |
| steel reinforcement of brands/makes for R.C.C. including straightening, bending, placing in and binding all complete. | — | — | — | — | |
| 10 | Thermo-Mechanically Treated grade Fe-500D or more of brands/makes. | Kg | 65520.00 | 116.39 | 76,25,872.8 |
| fabrication, assembling of steel girders of spans with structural conforming to Quality "B0" Designation E250 to IS:2062, erection / end launching of steel with cranes or any other launching methods as conditions (not requiring block) on sub-structure provision of trolley etc., complete as per d Q A P and drawings to IRS-B1-2001 and relevant codes and Note: 1. Detailed and erection drawings methodology will be by the contractor and from Railway. 2. The all inclusive including in position, complete in except cost of (i) Metalising; (ii) Bearings bolts which shall be under relevant item. 3. shall be made on theoretical weight of main and gusset plates Payment Schedule: (i) material at site: 40% of girders: 20% (iii) 20% (iv) in all respects: 20% | — | — | — | — | |
| 11 | Girder/Semi Through Girder (Steel | MT | 191.00 | 1,51,241.75 | 2,88,87,174.25 |
| 12 | and fixing HSFG bolts and any length with nuts including DTI conforming to IRS-B1- r bridges and steel with contractors labour, plants and lead and lift | Kg | 2097.00 | 354.38 | 7,43,134.86 |
| of steel work of girders sprayed aluminium after preparation by Sand/grit followed by one coat of (IS:5666) & one coat Chrome primer (IS:104) coats of aluminium paint with all labour, T&P and as a complete job duly to all relevant and process given Clause 39 of IRS-B1-2001. Nominal Thickness of Aluminium coating shall microns. DFT of Zinc primer shall be 25-30 and DFT of each coat of paint shall be 12-14 | — | — | — | — | |
| 13 | girder during fabrication | Sqm | 3247.00 | 734.3 | 23,84,272.1 |
| 14 | and fixing M.S. Angles 65mmx 8mm or any conforming to IS:2062 nosing of steps of stair Foot Over Bridges provision of 10mm dia, 600mm c/c and fixing girder with M.S. flat, anti-slip arrangements top of nosing as per scheme given by in charge with all labour, T&P as a job. | Kg | 3300.00 | 114.24 | 3,76,992 |
| and fixing various size holding down bolts to relevant in concrete in other structures with bolts, washers/plates, of holes with cement or concrete with all material, as a complete job. | — | — | — | — | |
| 15 | Cement Grout. Cost of shall be paid extra. | Kg | 1504.00 | 146.33 | 2,20,080.32 |
| of existing bed plate bed block, supply, and erection of new of approved sizes in position over bed block of by giving full and setting them on the free flow non-shrinkable compound, scrapping or of bed block, if required, and fixing of holding bolts of suitable sizes nuts, washers etc., holes of required size, holes by epoxy mortar holding down bolts. to be done during Cost of holding down shall be paid extra relevant item for supply of down bolts. | — | — | — | — | |
| 16 | HTS holding down bolts washer etc. | Kg | 2452.50 | 128.44 | 3,14,999.1 |
| 17 | fabricating and erecting and/or bolted and/or steel work in built up trusses and framed staging, racks, Height for Steel Structures bridge girders, using tees, angles and plates, gussets, square bars, cleats, bolts contractors own steel cutting, bending, drilling, riveting, fixing, erecting, welding, etc., with Providing wherever required as drawing including a priming coat of a steel primer with all materials, labour, plants, lead & lift including tracks if required etc., as per specification and by Engineer-in- Note: The payment shall on the theoretical weight components and gusset | MT | 75.00 | 1,20,587.99 | 90,44,099.25 |
| 18 | and supplying Wire Net Trungers 4mm galvanised steel 32 kg/10sqm having tensile strength of 300 conforming to IS:280 and coating conforming to woven into mesh with twist, mesh size not 100mm x 100mm. | Sqm | 637.50 | 443.07 | 2,82,457.13 |
| 19 | of Railway's Plates, Channels, Angles, and I-Section by process with Zinc Coating of Zinc coating shall not than 705 g/sqm and thickness shall not than 100 microns necessary surface as per Clause-4 of Galvanisation shall as per IS:2629-1985 and with Zinc to IS:209-1992, duly the measures for against of hot-dip iron and steel products IS:6158-1984 with all labour, material, plant, all lead, lift and of tracks etc. complete directed by the Engineer | MT | 25.00 | 23,712.54 | 5,92,813.5 |
| machinery for minor works for short including operator/driver, lubricants and consumable. contractor shall arrange all permits as required by regulations prevailing in of work. Payment shall for actual working hours | — | — | — | — | |
| 20 | Loaders 3DX Plus or minimum 1.10 cum capacity | Hour | 100.00 | 846.09 | 84,609 |
| in excavation by means (Hydraulic Means for and floors of the retaining walls etc. setting out, dressing of ramming of bottom, getting excavated material, back layers with approved and consolidation of the ramming and watering all lift, disposal of up to a lead of 300m, of shoring and strutting labour and material as per drawing and specification as directed in charge. Note: This be used for excavation connection with other works also like side foundation for OHE masts other miscellaneous in connection with Conversion, Doubling, New | — | — | — | — | |
| 21 | item nos. 022011 to for executing the work and/or liquid mud to all additional including pumping as required. Note: The percentage rate is only for the quantity of executed under water. 20%] | cum | 729.00 | 42.69 | 31,121.01 |
| Schedule total | ₹6,83,03,605.52 | ||||
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
HTML
nit.pdf
NIT
DRMBRC201of2025-26C.pdf
ATTACHMENT
Annexure-F.pdf
ATTACHMENT
JPOSTDepartment.pdf
ATTACHMENT
PCECircular88forQualityofWorks.pdf
ATTACHMENT
IRSGCCApril-2022.pdf
ATTACHMENT
AdvancecorrectionslipNo01to10GCCApril2022.pdf
ATTACHMENT
Annexure-VIB.pdf
ATTACHMENT
ImplementationofContractore-MB.pdf
ATTACHMENT
201Specialcondition.pdf
ATTACHMENT
PCECircular87.pdf
ATTACHMENT
Dainikkaaryanishpaadananumatipatra.pdf
ATTACHMENT
Recommendedmakermanufacturerofcivilmaterials1.pdf Special Condition 04
ATTACHMENT
compositetenderletter.pdf
ATTACHMENT
conditionofcompositetender.pdf
ATTACHMENT
Recommendedmakermanufacturerofcivilmaterials1.pdf
ATTACHMENT
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .