WBMAD/NDDM/PHD/NIeT230/24-25_1

Scope of work

CONVERSION / MODIFICATION / UPGRADATION OF 6000 LITERSSUCTIONTO 3000 LTRS JETTING MACHINE & 3000 LITERS SUCTION MACHINE. Features: Jetting Pump: Type: Triplex plunger pump Displacement: Reciprocating positive displacement Drive: Through split shaft unit Tank: Tank rear door opening & Tank Capacity: Hydraulic & 3000ltrs Fresh Water Tank tipping/Angle: Hydraulic/25Degree Jetting Hose: Dia./Length/Qty.../Type: 1.M.M"/60mtr + 1"/60mtr /02nos./Thermoplastic Jetting Nozzle Size/Shape/Qty...: 1"/Round/03nos. Size/Shape/Qty...: 1"/Conical/03 nos. Hose reel: Drive: Low speed high torque hydraulic motor. Type: Swivel 180 degree(90 degree in each left & right from centre) Hyd. Pump: Type: Gear type Drive: Chassis side PTO Jetting Pump, Pratissolispa /woma /Hammelman Flow/Pressure/Power: 226LPM/140bar/81hp Jetting Hose: Max. Working Pressure: 172bar Min. Burst Pressure: 430bar Hose reel: Jetting hose storage Capacity: 60 mtrs hose additional to be provided extra. Split shaft pto: Throughput Torque: 1 No. 400 kgm. No. of Auxiliary Outputs: 1nos. 40Kgm Hyd. Pump: Displacement/rpm: 16.77cc/rev./ 1500 rpm Safety: Water level indicator: Type/Qty.: Tube type/02nos. Water filtration system for Jetting pump Type: Inline water filter Mounting Chassis: GVW: 12TON Emission Norms: As per Local RTO Chassis Engine output: Min.90 HP Driver's Cabin Type: Single(Day)Cabin Make/model/wb/hp/Side PTO Provision: Ashok Leyland/1215/4200mm/150hp /Mandatory Make/model/wb/hp/SidePTO Provision: Ashok Leyland /1215 BS VI /3970mm/147hp/ Attached Make/model/wb/hp/Side PTO Provision: Same as above Scope: Customer Side PTO Provision: Provision required Painting: Surface preparation and finish: Equipment's Exterior: Spray-painted with two coats of superior quality anti corrosive primer epoxy zinc phosphate and two coats of PU paint.(Color code will be as per customer /tender requirements.) Tank's interior: Coated with2coatsofsuperiorquality anti-corrosive grey epoxy paint. Consumable Spare Parts List : 1. 60Mtrs Length 1” dia Jetting Hose with End fittings. 2. 1” Dia Rotary Swivel Unit – 2Nos 3. Jetting Filter / Steiner of jetting Unit – 2Nos 4. Complete Seal kit of PTO Unit – 2Set 5. Steiner of Hydraulic Tank return line – 2Nos 6. Label Indicator Tube for Tank, Sludge & Jetting - 4Nos 7. Rear Door Rubber Seal – 1Set 8. 4” Rubber ‘O’ for female coupling of Suction Pipe. 9. 2Set Vanes for PN 84 D Vacuum Pumps. 10. 2set Vanes for PN 84 D Vacuum Pumps. Supervision Facility; The bidder shall provide supervision during operation of the machine for one month. Payment Terms: 100% Against commissioning of the equipment at North Dum Dum Municipality. Credential criteria: The intending bidder shall produce the following credentials: 1) Intending tenderers should produce credential of a similar nature of work of the minimum value of 40% of the amount quoted by the respective bidder during 5 (five) years prior to the date of issue of this tender notice, or 2) Intending tenderers should produce credentials of 2 (two) similar nature of works, each of the minimum value of 30% of the amount quoted by the respective bidder during 5 (five) years prior to the date of issue of this tender notice, or 3) Intending tenderers should produce credentials of one single running work of similar nature which has been completed to the extent of 80% or more and value of which is not less than the desired value at (1) above, and 4) In case of running works, only those tenderers who will submit the certificate of satisfactory running work from the concerned Executive Engineer, or equivalent competent authority will be eligible for the tender. In the required certificate it should be clearly stated that the work is in progress satisfactorily and also that no penal action has been initiated against the executed agency, i.e., the tenderer. and 5) Similar nature of works shall mean ‘‘Manufacturers work of Suction cum Jetting machine with in last 5 years from the date of issue of this NIT to Govt. Organization. 7) After-sale servicing-repairing arrangement shall preferably at site, and (while out of the site) in and around Kolkata. 8)Solvency Certificate for not less than 50 lacs (not before 12 months from the date of issue of this NIT) from a Nationalized Bank/scheduled Bank of India is to be submitted during submission of tender, failing which the bid will not be considered for acceptance. 9)The validity of the rate offered shall be at least 180 calendar days from the last date of submission. The bidder is liable to execute the entire/part-work at the rate offered by them at anywhere in and around Kolkata, if asked for, within the aforesaid time period 10)The bidder must have implemented an Integrated Management System (IMS) to ensure quality assurance, better management operations, and increased efficiency. The bidder should produce ISO certification (ISO 9001:2015, and ISO 14001: 2015) as evidence in compliance. 11)The bidder should be registered with Income Tax Department and Sales Tax Department and complying with necessary payment obligations as per government requirements. 12)The bidder should submit the backup letter from critical components manufacturer such as Jetting Pump, Jetting Hose and Jetting Nozzles. Bidder should submit OEM back up letter along with bids mentioning that the bidder has procured over 100 Nos similar components for sewer cleaning application and has competence for firmament & providing after sales service support for minimum period of ten years. 13)The bidder should comply with all procedures lead down in ISO 9001:2015 from past minimum seven years. The valid ISO certificate should be submitted along with bid. The bidder shall also have to submit latest factory license in the bid document. Transportation: All transportation charges to both sites including insurance will be borne by the bidder

QUALITY ENVIRO ENGINEERS PRIVATE LIMITED (BID ID -6178746)

TPS Infrastructure Limited (BID ID -6182249)