Construction of Secondary School building at district BANASKANTHA.

Dismentling sanitary fittings like wash basin, Indian WC pan,

1 Europian WC pan, flushing tank etc. including stacking the 3.00 414.23 No

materials with all lead and lift

Excavation for foundation upto 1.5 m depth including sorting out

and stacking of useful materials and disposing off the excavated

stuff upto 50 Meter lead.(A)

Loose or soft soil

Excavation for foundation for depth from 1.5 m to 3.0 m including

3 sorting out and stacking of useful materials and disposing off the 591.37 136.30 Cmt.

excavated stuff upto 50 Meter lead.(A) Loose or soft soil

Excavation for foundation upto 1.5 m depth including sorting out

4 and stacking of useful materials and disposing off the excavated 75.00 276.24 Cmt.

stuff upto 50 Meter lead.(D) Soft rock not requiring Blasting

Filling with the available excavated earth (excluding rock) in

trenches, plinth, sides of foundation etc. in layers not exceeding

20cm in depth consolidating each deposited layer by ramming and

6 of 20 cm. thickness inculding watering, ramming and consolidation 1927.22 282.07 Cmt.

etc. complete.

Brick work using common burnt clay building bricks having

crushing strength not less than 35 kg./Sq.Cm. in foundationand

plinth in Cement Mortar 1:6. (1‐ Cement : 6 ‐finesand)(C) Fly Ash

Masonry work with aerated light weight concrete Blocks of size

60cm x 23cm x 23cm or any other approved size, having crushing

strength @ 35 kg/sqcm Fixing with ready-mixed mortar

('Fixoblock'of M/s Ultratech cement Ltd./Rapid Fix/Lion) having

tensile adhision strength >0.8 N/mm2 and compressive strength of

>2N/mm2.The mortar is to be fixed in a thickness of 3mm to 5mm

on the clean and leveled surface of blockmasonry using proper

trowel. For all floor and lead and lift For superstructure.

Brick work using common burnt clay building bricks having

crushing strength not less than 35Kg./Sq.Cm. for superstructure in

cement mortar 1:6(1 cement :6 fine sand) including curing etc.

complete. (C) Fly Ash Bricks For all heights and all floor

Half brick in common brunt clay building bricks having crushing

strength not less than 35 Kg/sq.cm in cement mortar 1:4 (1 cement :

4 coarse sand) (C) Fly Ash Bricks in super structure including

curing etc. complete.For all floors

Providing & laying Cement Concrete 1:4:8 (1 Cement :4 Coarse

sand :8 hand brocken stone aggregates of 40mm nominal size) in

plinth and curing complete including cost of formwork. (A)

Foundation and Plinth - At plinth level

Providing and laying cement concrete 1:5:10 (1- Cement : 5- Coarse

sand : 10- hand broken stone aggregates 40 mm nominal size) and

curing complete including cost of formwork in (A) Foundation and

Providing & laying Cement Concrete 1:2:4 (1 Cement : 2 Coarse

Sand : 4 graded stone aggregate 20 mm nominal size) & curing

complete including cost of form work (A) Foundation and Plinth -

Below Tie beam, Plinth protection & surface leveling work.

Providing and laying cement concrete flooring 1:2:4 (1-cement : 2-

coarse sand : 4-graded stone aggregate 20mm nominal size) laid in

one layer and finished with a floating coat of neat cement. (A) 40mm

Description Of Item Quantity Rate Unit Amount

Providing and laying controlled cement concrete M.150 for curing

complete including cost of formwork and excluding cost of

reinforcement for reinforced concrete work in (A) Foundations,

footings,Base of columns and Mass concrete (Cement Level 290 Kg)

Providing and laying controlled cement concrete M.200 and curing

complete including the cost of formwork and excluding the cost of

reinforcement for reinforced concrete work in (C) Coping Vertical

and horizontal for all floor (Cement Level 360 Kg)

Providing and laying controlled cement concrete M.250 and curing

complete including the cost of formwork and Excluding the cost of

17 reinforcement for reinforced concrete work in (A) Foundations, 447.00 4324.24 Cmt.

footings, Base of columns and Mass concrete.(Cement Level

Providing and laying controlled cement concrete M.250 and curing

complete including the cost of formwork and Excluding the cost of

reinforcement for reinforced concrete work in Plinth Beams.

(Cement Level 380 Kg)

Providing and laying controlled cement concrete M.250 and curing

complete including the cost of formwork and excluding the cost of

reinforcement for reinforced concrete work in (C) Lintels all floor

(Cement Level 380 Kg)

Providing and laying controlled cement concrete M.200 and curing

complete including the cost of formwork and excluding the cost of

reinforcement for reinforced concrete work in (C) Chajja all floor

(Cement Level 360 Kg)

Providing and laying controlled cement concrete M.250 and curing

complete including the cost of formwork and excluding the cost of

reinforcement for reinforced concrete work in (C) Chajja all floor

(Cement Level 380 Kg)

Providing and laying controlled cement concrete M.200 and curing

complete including the cost of formwork and excluding the cost of

reinforcement for reinforced concrete work in (C) Beams all floor

(Cement Level 360 Kg)

Providing and laying controlled cement concrete M.250 and curing

complete including the cost of formwork and excluding the cost of

reinforcement for reinforced concrete work in (C) Beams all floor

(Cement Level 380 Kg)

Providing and laying controlled cement concrete M.250 and curing

complete including the cost of formwork and excluding the cost of

reinforcement for reinforced concrete work in (D) Columns, Pillars

posts and struts all floor (Cement Level 380 Kg)

Providing and laying controlled cement concrete M.200 and curing

complete including the cost of formwork and excluding the cost of

reinforcement for reinforced concrete work in (D) Columns, Pillars

posts and struts all floor (Cement Level 360 Kg)

Providing and laying controlled cement concrete M.200 and curing

complete including the cost of formwork and excluding the cost of

reinforcement for reinforced concrete work in (C) Slab all floor

(Cement Level 360 Kg)

Providing and laying controlled cement concrete M.250 and curing

complete including the cost of formwork and excluding the cost of

reinforcement for reinforced concrete work in (C) Slab all floor

(Cement Level 380 Kg)

Providing and laying controlled cement concrete M.200 and curing

complete including the cost of formwork and excluding the cost of

reinforcement for reinforced concrete work in (E) Staircases

including lending all floor (Cement Level 360 Kg)

Providing and laying controlled cement concrete M.250 and curing

complete including the cost of formwork and excluding the cost of

reinforcement for reinforced concrete work in (E) Staircases

including lending all floor (Cement Level 380 Kg)

Description Of Item Quantity Rate Unit Amount

Providing I.S.I. T.M.T Bars Fe.500D steel reinfocement (ISI mark)

30 Confirmed to IS-1786 for R.C.C.work including Cutting, bending, 28424.16 77.29 Kg.

binding and placing in position etc. complete.For all floors

Providing I.S.I. C.R.S Bars Fe 500 steel reinfocement (ISI mark)

31 Confirmed to IS-1786 for R.C.C.work including Cutting, bending, 88596.00 91.64 Kg.

binding and placing in position etc. complete.For all floors

Providing 10mm thick cement plaster in single coat on on

brick/concrete walls & Ceilling & Soffit of stair interior plastering in

cement mortar 1:4(1 cement 4 sand) watering, curing etc.

complete.For all floors

Providing 15mm thick cement plaster in single coat on rough or fair

side of single or half brick wall for interior plastering in cement

mortar 1:4(1 cement 4 sand) watering, curing etc. complete.For all

20mm thick sand faced cement plaster on walls above ground level

consisting of 12mm thick backing coat of cement mortar 1:3(1

cement 3 sand) and 8mm thick finishing coat of cement mortar 1:1(1

cement 1 sand) watering, curing etc.complete for any Height.

Finishing wall with weather proof exterior emulsion paint on wall

surface (two coats) to give an required shape even shade after

thoroughly brushing the surface to remove all dirt, and remains of

loose powdered materials.etc complete. The rate shall be including

of providing two coats of primer of approved brand and

manufacturer on new wall surfaces to give and even shade including

throughly brushing the surface free from mortar dropping and other

foreign matter and sand papered smooth.

Distempering with dry distemper of approved brand and

manufacture (two coats) and of required shade on wall surfaces to

give an even shade, over and including applying one coats of Birla

(White Cement based) or Asian (acrylic lapy) or equivalent and a

priming coat of whiting after thoroughly brooming the surface free

from mortar dropping and other foreign matter and sand paper

smooth. The rate shall be including scraping and old deteriorated of

existing paint.

Painting two coats (excluding priming coat) on new steel

and other metal surface with synthetic enamel paint,

brushing to give an even shade including cleaning the

surface of all dirt, dust and other foreign matter.

Providing and laying 25mm thick polished Kota stone

flooring/staircase treads (two pieces with three groves in front of

38 steps) over 20mm (average) thcik base of cement mortar 1:6 (1 325.02 1018.88 Smt

cement 6 coarse sand) laid over and jointed with grey cement slurry

including curing, rubbing, and polishing etc. complete.

Re-fixing of existing 25mm thick polished Kota stone

flooring/staircase treads over 20mm (average) thcik base of cement

39 mortar 1:6 (1 cement 6 coarse sand) laid over and jointed with grey 285.00 712.91 Smt

cement slurry including curing, rubbing, and polishing etc.

complete. (As directed by Engineer in charge)

Providing & fixing average 25mm thick Double polished Kota

stones for shelves in cup board, seating plat form, including curing,

rubbing, polishing etc. complete. (As directed by Engineer in

Providing & Fixing 25mm thick double polished vertical Kotah

41 stone for (partion)urinal as par drawing including round edge 3.96 1361.25 Smt

moulding etc comp. (As directed by Engineer in charge)

Description Of Item Quantity Rate Unit Amount

Providing and laying 18 mm thick mirror polished black granite

stone machine cut in single piece (Max. available) in sill and jambs

laid over 10 mm thick cemen mortar 1 : 3 (1 cement : 3 coarse sand)

42 and jointed with grey cement slurry with matching pigment incl. 9.90 2316.65 Smt

rubbing and polishing half rounding edge both side etc. complete

colour and shed as approved by architect engineer in charge. (As

directed by Engineer in charge)

providing & laying cement water proofing of average 60mm thick

for terrace for all floors using first layer cement mortar (1:3) over an

exsisting surface second layer of arranging brick bats acording to

slop adding suitable chemical to make water tieght & again third

layer of cement mortar 1:3 on above including adding water proffing

compound and finishing top with net cement slury using cement @

2.75 kg/sq mt. making any patterns and design on the top etc.

complete as directed.(As directed by Engineer in charge)

Providing & Laying Broken China Mosaic flooring for plain &

curve surface 12mm to 20mm of broken piece of ceramic tiles or

Glazed tiles ( one or more colour as directed by Engg. In charge ) to

be laid over cement mortar bedding of CM 1:3 to plain or and slopes

44 and to be tempered to bring mortar cream up to and colour pigment 816.60 779.70 Smt

including rounding of junctions and extending them pu to 15cms

along the wall and curing with bends any patterns of designs as per

deawing or directions including cleaning with water and oxilic acid

using 1 kg / 1 bag of water proofing materials.

Providing cement vata (10 cm X 10 cm size) quartar round in

cement mortar 1:1 including neat cement finishing, watering etc.

complete Respectely plaster acitivity shall be commenced only after

completion of vata work.

Providing & fixing in position mild steel door with ventilation frame

40x40x6 mm and shutter frame 35x35x5mm ,75x5 mm ms flate at

lock rail,10 mm square bar in vent at10 cm c/c coverd with

46 corrugated ms sheet 0.6 mm thick, including applying a priming coat 129.65 3718.05 Smt

of read lead paint including cleanicn the surface of all dirt, dust and

other foreign matter (As directed by Engineer in charge& approved

drawing and design etc.)

Providing & fixing in position mild steel window with ventilation

frame 35x35x5 mm and shutter frame 25x25x5mm ,10 mm square

bar grill at10 cm c/c coverd with corrugated ms sheet 0.6 mm

thick,including applying a priming coat of read lead paint including

cleanicn the surface of all dirt, dust and other foreign matter (As

directed by Engineer in charge& approved drawing and design etc.)

Providing and fixing window having extruded aluminum Colour

Powder Coated section frame main outer size 63.50 x 38.10 x

mm(of Jindal Section no:4605,@ Wt 1.094 Kg / Rmt), horizontal

two track member size 61.85 mm x 31.75 mm x 1.20mm (of Jindal

Section no: 8687 @ wt.of 0.695 Kg/mt), vertical member of size

61.85 mm x 31.75mm x 1.30 mm (of Jindal Section no:8758 @

wt.of 0.0.659 Kg/mt) with sliding shutters of horizontal member size

40mm x 18mm x 1.29mm (of Jindal Section no:8949 @ wt.of

0.456Kg/mt), vertical member of size 40mm x 18mm x 1.29mm (of

Jindal Section no:8947 @ wt.of 0.456Kg/mt/ Section 8948, @ Wt.

0.457 Kg/mt) with 5 mm thick transparent bronze colour tinted float

glass with powder coated aluminum fittings and fixtures and

transparent silicon sealant glass fixing to frame as per details etc

complete for window.

Steel work, M.S Grill, welded in built up sections framed work

including cutting, hoisting, fixing in position and applying a priming

coat of read lead paint. (A)In beams and joists, channels angles

Tees, flats, with connecting plates or angle cleats as in main and

cross beams. Hip and jack rafters, purlins conneted to common

rafters and the like

Description Of Item Quantity Rate Unit Amount

Providing & fixing G.I rain water Spout of 65mm dia and 60cm

Painting of logo on front side wall as directed by Engineer in charge

and as per approved drawing.

Providing and laying white glazed tiles 6mm thick in flooring treads

of steps and landing laid on a bed of 12mm thick cement mortar 1:3

(1-cement : 3-coarse sand ) finishing with flush pointing in white

Providing and fixing Chicken mesh jali (22 gauge) 15cm wide at the

junction of 2 different surfaces of different material component at

the time of plastering to prevent cracking in plaster surface as and

where directed at all floors with all leads and lifts etc.complete.

Providing & Fixing Green board(2400mm x 1200mm) with soft

54 board(1200mm x 1200mm) on wall as per the drawing & design etc. 13.00 10352.50 NO

Providing upto floor two level precast cement concrete jali or grill

1:2:4 mix (1- Cement : 2- coarse sand : 4-graded stone aggregate

55 6mm nominal size) reinforced with 1.6 mm dia. Mild steel wire 37.69 853.91 Smt

including roughening,cleaning, fixing and finishing in cement

mortar 1:3 and curing complete.(E) 100mm thick

Providing & laying Sandwich platform of maximum 700mm width :

a) Sandwich type platform of top stone as 18 mm thick Granite of

approved shade and sample and bottom stone as 25 mm thick single

side polished kota stone with 25 mm thick screed of cement mortar

1:4 in between two stones. The stone shall be fixed by chasing in to

the wall surface and providing necessary MS supports of

50x50x6mm Angle or "T" (hot dip galvanised) and embedded in

between the two stones etc as per the drawing / specification and / or

as instructed of EIC complete and b) 75 mm raised platform (Otli) at

56 floor level with polished kota laid on 50mm screed of (1:2:4) and 17.33 5048.06 Smt

skirting of kota stone as per design and approved sample. The rate

includes rounding, champhering and mirror polishing of edges,

facias of granite, MS supports, all material labour and wastage, as

per drawing, including necessary bonding adhesive (if required) of

Araldite or equivalent. Rate shall be also inclusive of making holes

& cutouts for SS sink, Oval wash basin, Piller tap / Bib tap etc. as

directed by engineer in charge. (Only finished single side granite

work shall be measured & paid for). (As directed by Engineer in

charge& approved drawing and design etc.)

Providing and fixing pre-cast Rubber Dye / steel Dye inter locking

concrete block 60mm thick with grade of concrete M300 pnumatic

compressed / vibrated mechanically and as per approved design

Confirming to IS 15658 : 2006 including 35 mm Sand layer for

levelling and filling the joint with sand in proper line and level as

per guidlines of IRC : SP 63-2018 etc. Complete.

Providing and fixing pre-cast concrete kerb stone of gray cement

based concrete block 30 cm length, 30cm height and 15cm thick of

58 M250 grade concrete as per aprooved design and including 160.00 374.92 Rmt

excavation for fixing in proper line and level, filling the joint with

C:M 1:3 (1 Cement : 3 Fine sand) etc. complete (uptp 10 ton).

Providing and fixing 0.90 meter high fencing with 1.20 meter long

M.S. Angle posts 40 mm. X 40 mm. X 6 mm. And oil painting

coats fixed at 2.5 mt. C/c with Three horizontal lines and two

diagonals of galvanised steel barbed wire weighing 9.38 Kg. Per

meter, strained and fixed to posts with G.I. staples, including fixing

posts in compound wall

Description Of Item Quantity Rate Unit Amount

Providing water harvesting pit of 5.50 m Dia well and 2.46 mt

x2.46mt x4.00 mt size brick masonary well for water logging with

excavation in any strata upto four meter depth, filling the pit with

B.T. Metal 40 mm in 0.80 mt. depth with 25-40mm kapachi,

60 mt. depth and 0.50 mt. depth with coarse sand & charcoal in layers 1.00 241643.51 JOB

including making P.V.C. line for water inlet etc. as directed with

300mm dia bore 40 mt. depth and 200mm dia UPVC CM type

casing pipe as slott 1.5 to 2.0 mm size and ordinary pipe with gravel

packing or as directed.

Providing and constructing filter chamber of size 1.50 x 1.50 x

mt. as directed including connection rainwater pipes as per detailed

as directed by Engineer in charge including cost of labour and

Providing & supplying ISI mark P.V.C butterfly valves & Reflux

valves of following class and diameter including all taxes, insurance,

transportation, frieght charges, octroi, inspection charges, loading,

unloading, conveyance to departmental store.75 MM dia.

Providing and laying tactile tile (for vision impaired persons as per

standards) of size 300x300x15 mm having with water absorption

less than 0.5% and conforming to IS:15622 of approved make in all

colours and shades in for outdoor floors such as footpath, court yard,

63 multi modals location etc., laid on 20mm thick base of cement 9.25 1879.40 Smt

mortar 1:4 (1 cement : 4 coarse sand) in all shapes & patterns

including grouting the joints with white cement mixed with

matching pigments etc. complete as per direction of Engineer-in-

Construction of a soak well of as per the approved drawing & design

etc.in all sort of soil complete as directed and approved by engineer

64 8.00 5924.42 Per Cmt

incharge.( The internal In-to-in dimension shall be considered for

calculation)

Construction of a septic tank as per the approved drawing & design

etc.in all sort of soil complete as directed and approved by engineer

65 8.00 5679.00 Per Cmt

incharge. ( The internal In-to-in dimension shall be considered for

calculation)

Description Of Item Quantity Rate Unit Amount

RCC GSR ( description of item for turnkey tender)

Preparing structural design of RCC Under Ground / Partially under

ground / above high ground level Reservoir of required capacity as

per relevant I.S.s and constructing the same, including excavation in

all types of soil strata (including rock) including shoring strutting if

required, for loose soil / to protect from collapse due to near by

traffic load, casting 100 mm thick P.C.C. leveling course in M-10,

Refilling the pit with proper soil and disposing of the surplus stuff

within a lead of 50 meters. Including cement plaster in CM 1:2 with

approved water proofing compound to inside water touching surface

to container. Including all types of labour and material charges of

lowering, laying, erecting / hosting and jointing of pipe assembly to

inlet, outlet overflow, washout and bye pass arrangement as per

hydraulic design. Providing and fixing accessories like MS / GI

Ladder, CI Manhole frame and cover, water level indicator,

adequate cowl type ventilators or lantern type ventilator with

66 20000.00 6.32 liter

stainless steel jail. B.B. Masonry chambers for valves. Providing and

applying three coats of cement paint / snowcem to the out side face

of structure. It also includes satisfactory water tightness test as per

relevant I.S. code and painting name of scheme and capacity on the

tank as per direction of engineer in charge. List of Indian Standards

for Design of GSR / SUMP:-The structural design of GSR shall be

in accordance with provisions relevant I.Ss. (1) I.S. 3370 part I & II

2009 or latest revised (1.1) I.S. 3370 part III & IV 1965 or latest

revised (2) I.S. 456 – 2000 or latest revised. (3) I.S. 1893 – 2000 –

1984 or latest revised. (4) I.S. 875, Part – 1 to 3, 1987 or latest

revised. General Specifications:-(1) Water depth in container shall

be adopted as per data of tender. If water depth is not specified the

suitable water depth / acceptable to field engineer in accordance

with hydraulic requirement shall be adopted for capacity. (2) Shape

of container (in plan) specified by in data shall be adopted in

absence circular shape shall be adopted. (3) Size shall be fixed as

Providing and fixing washbasin with single hole for pillar tap with

M.S. brackets painted white including sutting holes and making

67 good the same but excluding fittings.(A) Vitreous China:(ii) Flat 4.00 2013.85 NO

Back washbasin 550 mm x v 400mm size. (i) In white colour

including CP Brass west , MI Fisher union and Pillat tap

Providing & fixing Stainless steel 316 Grab Bar 40mm dia.75Cm

long rail.as directed and approved by engineer incharge.

Construction of ICN Chamber as peras directed and approved by

engineer incharge.

Providing and fixing screw down bib taps of following size.(B)

Brass chromium plated screws down Bib Tap. (i) 15mm dia.

Constructing brick masonry chamber for underground C.I.

Inspection chamber and bends with bricks having crushing strength

not less than 35Kg/Cm2 in C.M. 1:5 C.I. cover with frame (Light

duty) 455mm x 610mm intenal dimensions total weight of cover

with frame to be not less than 38Kg. (Wt. of cover 23 Kg.) and Wt.

71 of frame 15Kg.) (R.C.C. top slabe with 1:2:4 mix (1-cement :2- 4.00 3175.32 NO

coarse sand :4-graded stone aggregate 20mm size) foundation

concrete 1:5:10 inside plaster 15mm thick with cement mortar 1:3

finished smooth with a floating coat of neat cement on walls and bed

concrete etc. complete.(i) Inside dimensions 455mmx 610mm and

450mm deep for single pipe line.

Providing & fixing urinal of Approved quality including connecting

the urinal with waste pipe, trap etc. complete (A) White earthenware

72 flat back or corner type (including Angle cock,Waste 8.00 1836.03 NO

coupling,connection pipe & waste pipe) as approved by engineer

Description Of Item Quantity Rate Unit Amount

Providing and fixing wash down water closet (European type W.C

pan) with integral P or S trap including jointing the trap with soil

pipe in cement mortar 1:1 (1 cement : 1 fine sand) (seat cover,Jet

spray & Flush Tank to be measured Including) (A) Vitreous China

(I) Long pattern white as directed and approved by engineer

Providing and fixing water closet squatting pan (Indian type W.C

pan) size 580 mm (earthwork, bed concrte, foot rests,Flush Cock

and trap to be measured and including paid) (A) Vitreous China (I)

Long pattern white as directed and approved by engineer incharge.

Providing erecting and fixing double coated ISI water tank of

75 required capacity each with all necessary fittings and connection etc. 2000.00 3.95 liter

complete on terrace

76 Providing & fixing UPVC ball valve(A) 40mm dia. 1.00 1727.10 NO

77 Providing & fixing UPVC ball valve(A) 25mm dia. 2.00 709.02 NO

78 Providing & fixing UPVC ball valve(A) 15mm dia. 2.00 478.74 NO

Providing and fixing S.W. gully trap with C.I. grating brick masonry

chamber and water tight C.I. cover with frame of 300mm x 300mm

size (inside) with standard weight.(i) Square mouth traps.(B) 150mm

x 100mm size P or R type

Providing and fixing PVC SWR Nahni trap IS 14735 for drain -

mm diameter with jali of the following nominal diameter of self

cleansing design with C.I scread down or hinged grating including

the cost of cutting and making good the walls.

Providing & erecting open well horizontal mono block pump set

with cast iron body, compete for three phase submersible motor

81 having (A) For 1.5 HP 3 phase open well horizontal mono block 2.00 10284.83 NO

pump set suitable for 190 LPM @ 20 mtr head suitable for 40 mm

dia delivery pipe.

82 Providing & fixing 110mm dia PVC cowl vent to pipes. 2.00 75.75 NO

83 Providing & fixing 75mm dia PVC cowl vent to pipes. 2.00 55.55 NO

Providing and fixing C.I. Manhole cover 0.60 M. x 0.45M. size

having weight not less than 35Kg.

Providing laying and jointing in true line and level 40mm dia.

U.P.V.C. Pipe ( SCH- 40) for cold water including fittings as

approved by Engineer In Charge. Pipe shall be fixed on the wall

85 with the help of clamp at every two metre C/C or shall be concealed 95.40 148.12 Rmt

as directed including necessary fittings etc. including testing of pipe

and joints and fixing the same with adhesive solvent, including cost

of all materials.

Providing laying and jointing in true line and level 25mm

dia.U.P.V.C. Pipe ( SCH- 40) for cold water including fittings as

approved by Engineer In Charge. Pipe shall be fixed on the wall

86 with the help of clamp at every two metre C/C or shall be concealed 196.80 91.84 Rmt

as directed including necessary fittings etc. including testing of pipe

and joints and fixing the same with adhesive solvent, including cost

of all materials.

Providing laying and jointing in true line and level 15mm

dia.U.P.V.C. Pipe ( SCH- 40) for cold water including fittings as

approved by Engineer In Charge. Pipe shall be fixed on the wall

87 with the help of clamp at every two metre C/C or shall be concealed 35.65 72.65 Rmt

as directed including necessary fittings etc. including testing of pipe

and joints and fixing the same with adhesive solvent, including cost

of all materials.

Providing & fixing to wall ceiling and floor 6.0 kg F/cm2 working

pressure PVC pipes of the following out side dia. Special density

complete with special flange compression type fitting,wall clips etc.

including making good the wall ceiling and floor.(G) 110 mm dia

Providing & fixing to wall ceiling and floor 6.0 kg F/cm2 working

PVC pipes of the following out side dia. Special density complete

with special flange compression type fitting,wall clips etc. including

making good the wall ceiling and floor.(F) 75 mm dia

Description Of Item Quantity Rate Unit Amount

Point wiring for Light / Bell with 2-1.5 sq.mm & earth wire of

sq.mm (Green) both are of ISI marked 1.1 KV grade FRLS PVC

insulated multi strand copper wires up to 10 mtr length , in below

type of pipe erected with 6A Modular type switch / bell push &

accessories and earth continuity of following type, erected on PVC /

Metallic/Wooden box, single mounting base frame covered with

textured/metallic/white front plate modules erected on / in wall /

ceiling as per pipe erected, with necessary Lamp holder/ceiling rose

/ H.D.Connector as directed. (a) with medium class Rigid PVC pipe

and accessories erected flushed on wall/ceiling complete Cat. III

Point wiring for FAN with 2-1.5 sq.mm & earth wire of 1.5 sq.mm

(Green) both are of .ISI marked 1.1 KV Grade FRLS PVC insulated

multi strand copper wires up to 10 mtr length, in below type of pipe

erected with 6A Modular type switch and hum free EME four or

more step type electronic fan regulator with separately mounted and

91 accessories with earth continuity of following type erected on PVC / 12.00 705.99 Pt.

Metallic/Wooden box, single mounting base frame covered with

textured/metallic/white front plate modules erected on / in wall /

ceiling as per pipe erected. with necessary ceiling rose /

H.D.Connector as directed. (a) with medium class Rigid PVC pipe

and accessories erected flushed on wall/ceiling complete Cat. III

Point wiring for Individual Plug with & earth wire of 1.5 sq.mm

(Green) both are of ISI marked 1.1 KV grade FRLS PVC insulated

multi strand copper wires up to 10 mtr length, in below type of pipe

erected complete with Modular type switch & 5 pin Plug erected on

PVC / Metallic/Wooden box covered with appropriate front plate

modules erected on / in wall / ceiling as per pipe erected with

following type of accessories. [I] For 6A Plug and 6 a switch with 2-

1.5 sq.mm Cu. Wire from nearby switchboard/mcb db board (a) with

medium class Rigid PVC pipe and accessories erected flushed on

wall/ceiling complete Cat. III

Point wiring for Individual Plug with & earth wire of 1.5 sq.mm

(Green) both are of ISI marked 1.1 KV grade FRLS PVC insulated

multi strand copper wires up to 10 mtr length, in below type of pipe

erected complete with Modular type switch & 5 pin Plug erected on

PVC / Metallic/Wooden box covered with appropriate front plate

modules erected on / in wall / ceiling as per pipe erected with

following type of accessories.[II] For 16A Plug and 16 amp switch

with 2-2.5 sq.mm Cu. Wire from mcb db board. (a) with medium

class Rigid PVC pipe and accessories erected flushed on wall/ceiling

complete Cat. III

Point wiring for on board Looped Plug with 6A Modular type

switch & 5 pin socket erected on PVC / Metallic/Wooden box,

94 single mounting base frame covered with textured / metallic/white 9.00 283.81 Pt.

front plate modules erected on / in wall / ceiling with following type

accessories Cat. III

Providing following type of Modular Type Accessories mounted

with PVC / metallic/Wooden box, single mounting base frame

95 covered with textured / metallic/white front plate , modules erected 9.00 28.28 Each

with necessary connections as per site situation directed by Engineer

In charge. (7) Blank Plate Single Cat.III

Providing following type of Modular Type Accessories mounted

with PVC / metallic/Wooden box, single mounting base frame

96 covered with textured / metallic/white front plate , modules erected 8.00 168.67 Each

with necessary connections as per site situation directed by Engineer

In charge. (11) 6 Amps. Bell Push Cat.III

Description Of Item Quantity Rate Unit Amount

Providing following type of Modular Type Accessories mounted

with PVC / metallic/Wooden box, single mounting base frame

97 covered with textured / metallic/white front plate , modules erected 12.00 202.00 Each

with necessary connections as per site situation directed by Engineer

In charge (9) 16 Amp. SP one way switch Cat.III

Providing following type of Modular Type Accessories mounted

with PVC / metallic/Wooden box, single mounting base frame

98 covered with textured / metallic/white front plate , modules erected 60.00 224.22 Each

with necessary connections as per site situation directed by Engineer

In charge (10) 6/16Amp. Universal socket Cat.III

Providing & erecting Switch board for Computer or electric

apparatus consisting of following modular type accessories mounted

with PVC / Metallic concealed/open box with single mounting base

frame covered with textured/metallic /white front plate,modules

erected with necessary connections as directed

1 no. 6A/16A universal plug-switch combined.

3 nos. 6A Switch

3 nos. 6A 5 pin Plug For Modular Type Accessories Cat. III

Providing & erecting Approved make Power Saving 50 Watt Ceiling

Fan with double ball bearing ISI mark with Condenser 230 volt A.C.

100 50 Hz 1200 mm sweep complete having 3blades with aluminium 12.00 2297.75 Each

blades with , canopy & 30 cm. down rod erected with 3 core flexible

wire with earthing.(Make shall be approved by Engineer in charge))

Supplying and erecting 19 / 20 mm. nominal bore Medium Class

101 M.S. Pipe down rod erected duly painted for fan complete with 40.00 126.25 Rmt

proper insulation without leakage and earthing.

Supplying & erecting Fan Hook of 10 mm M.S. Round bar grouted

in RCC slab with Making the site as original.

Supplying & erecting approved make low noise decorative exhaust

103 fan having square frame ABS body with inbuilt lowers & square 2.00 2009.90 Each

frame. 200mm with 1350RPM

Supplying and erecting LED indoor fittings with LEDs of wattage

0.2 Watt to 0.5 Watt assembled on single MCPCB, with housing

used as a heat sink shall be made of thick sheet Steel conforming to

IS: 513/CRCA/ aluminium die cast powder coated and high U.V. &

corrosion resistance with diffuser with company mark/name 160V to

270V, Power Factor more than 0.95, THD < 15%,

CCT 3000 K to 6500K,

Luminaire efficacy> 85 lumens/watt ,LED

LED driver efficiency > 85 %

( fitting required LM-79 & LM-80 Certificates)(NOTE: Below

description have shown ranges of Wattage capacity of LED

between the ranges shown.) (A) Tube Light with integral driver (c)

18-20 Watts, Surge - 2KV,IP-20, 4 feet Cat-lll

Supplying and erecting led lamps with following wattage capacity of

220 to 240 voltage, minimum 15000 burning hours life, 500 V in

105 built-surge protection,Polycarbonate diffuser, mounting suitable for 8.00 131.30 Each

E14 / E27 / B22 lamp holders, pf >= 0.5 (B) LED Lamps integral

type, with PC diffuser suitable LAMP holder(b) 5 to 8 watts Cat-lll

Description Of Item Quantity Rate Unit Amount

Supplying and erecting LED indoor fittings with LEDs of wattage

0.2 Watt to 0.5 Watt assembled on single MCPCB, with housing

used as a heat sink shall be made of thick sheet Steel conforming to

IS: 513/CRCA/aluminium pressure die cast powder coated and high

U.V. & corrosion resistance with diffuser housed in aluminium

casted body with company mark/name

160V to 270V,Power Factor more than 0.95, THD < 15 %,

CCT 3000 K to 6500K,

106 Luminaire efficacy> 85 lumens/watt , 1.00 503.99 Each

LED driver efficiency > 85 %

( fitting required LM-79 & LM-80 Certificates)(NOTE: Below

description have shown ranges of Wattage capacity of LED

between the ranges shown.)

(A) Square/ Circular shaped Surface/Recessed Mount Downlight

with provision for spring loaded mounting clips complete.IP20

(ii) 11-15 watts, Surge-2 KV Cat-III

Supplying and erecting LED Solar street lights with High power

White LEDs wattage of 1Watt and above assembled on single

MCPCB, efficiency more than 130 lm/w and corrosion free High

pressure die cast aluminum housing with smooth finish powder

coated and heat sink extruded aluminium with diffuser and

Polycarbonate optics/ lenses with company mark/name engraved or

with 36 hours battery backup & MPPT 24V,7.5 A charge controller

with 12 hours automatic switch on/off with wind speed resistance

m/s as per IEC

(B) 15W, IP-65, PV Module – 80W and 4 mtr poles complete

108 Decorative call bell Ting-tong box type 250 volts complete erected 1235.60 79.79 Each

Providing and erecting ISI mark Medium class RIGID PVC PIPES

of following size complete to be erected on/in wall or ceiling erected

109 with necessary PVC fittings & Junction boxes fixed with adhesive 135.00 26.26 Rmt

solution & Clamps with following dia of pipes, in approved manner

as directed (a)20 mm

Providing and erecting ISI mark Medium class RIGID PVC PIPES

of following size complete to be erected on/in wall or ceiling erected

110 with necessary PVC fittings & Junction boxes fixed with adhesive 1.00 36.36 Rmt

solution & Clamps with following dia of pipes, in approved manner

as directed (b) 25 mm

Providing & erecting PVC Corrugated Flexible Conduit with

111 required nos. of coupling, PVC bushes, Check-nuts etc. complete of 70.00 23.23 Rmt

following sizes. (2) 25 mm

Providing and erecting Mains with 1.1 KV grade FRLS PVC

insulated ISI marked stranded Copper conductor wire in following

type of pipe to be erected concealed in /flushed on wall/ceiling, with

1.5 sq. mm copper conductor FRLS PVC insulated stranded wire of

green colour for earth continuity of following size (A) with medium

class Rigid PVC pipe and accessories (a) 2 wire 1.5 sq. mm

Providing and erecting Mains with 1.1 KV grade FRLS PVC

insulated ISI marked stranded Copper conductor wire in following

type of pipe to be erected concealed in /flushed on wall/ceiling, with

1.5 sq. mm copper conductor FRLS PVC insulated stranded wire of

green colour for earth continuity of following size (A) with medium

class Rigid PVC pipe and accessories (b) 2 wire 2.5 sq. mm

Description Of Item Quantity Rate Unit Amount

providing and erecting Mains with 1.1 KV grade FRLS PVC

insulated ISI marked stranded Copper conductor wire in following

type of pipe to be erected in / on wall / ceiling with 2.5 sq. mm

copper conductor FRLS PVC insulated stranded wire of green

colour for earth continuity of following size A) with medium class

Rigid PVC pipe and accessories (a) 2 wire 4 sq. mm

providing and erecting Mains with 1.1 KV grade FRLS PVC

insulated ISI marked stranded Copper conductor wire in following

type of pipe to be erected in / on wall / ceiling with 2.5 sq. mm

copper conductor FRLS PVC insulated stranded wire of green

colour for earth continuity of following size (A) with medium class

Rigid PVC pipe and accessories (b) 2 wire 6 sq. mm

providing and erecting Mains with 1.1 KV grade FRLS PVC

insulated ISI marked stranded Copper conductor wire in following

type of pipe to be erected in / on wall / ceiling with 2.5 sq. mm

copper conductor FRLS PVC insulated stranded wire of green

colour for earth continuity of following size (A) with medium class

Rigid PVC pipe and accessories (g) 4 wire 4 sq. mm

Providing and erecting Sheet Steel powder coated MCB distribution

board - flush / surface mounted fitted with busbar, neutral link, earth

bar and DIN rail, Conforms to IS 8623-1 & 3, IEC 61439-1 &

without MCB to house appropriate nos. of MCBs.(The DBs should

be used of same company of MCB to be used) suitable for (A) single

phase incoming and horizontal single phase outgoing (iv)12 way

providing and erecting Approved make ELCBs / RCCBs conforming

to IS: 12640 and having sensitivity of 30 mA and Short Circuit

withstand capacity of 10 KA and suitable for operation on single

118 phase 240 V,50Hz. having characteristic of quick action & tripping 1.00 2636.10 Each

with all advance feature & do not incorporate any electronic

component. for following Max. rating erected as directed (ii)

40Amps. DP Cat. III

providing and erecting Miniature circuit breaker single pole 6A to

25A suitable to operate on 240 V A.C. system and having breaking

capacity 10 KA to be erected in existing box. confirming to IS

8828/1996 with ISI Mark Cat.III

Providing & erecting 240 V MCB double pole switch for motor &

inductive load (C Curve) having 10 KA breaking capacity &

confirms to IS : 8828 in existing box having following capacity (A)

6 to 32 Amp. Cat.III

Sheets steel powder coated enclosure suitable for incorporating

One/Two nos. MCB.

Providing and erecting metallic vitrified danger notice board as per

122 language suggested by engineer incharge for MEDIUM VOLTAGE 1.00 80.80 Each

installation to be erected as per IS-2551.

Description Of Item Quantity Rate Unit Amount

Supplying & erecting earth pit of minimum bore dia.150mm size

approved make Earthing Electrode consisting Pipe-in-Pipe

Technology as per IS 3043-1987 made of corrosion free hot dipped

G.I.Pipes having Outer pipe dia of 50mm having 80-200 Micron

galvanising, Inner pipe dia of 25 mm having 200-250 Micron

galvanising, connection terminal dia of 12mm with constant ohmic

value surrounded by highly conductive compound with high charge

dissipation suitable for following type of applications with chamber

and heavy duty cover.(approved make OEM has to submit test

certificate) & having back filling compound of (B) Inner chemical

(CCM Compound)- Resistivity:- 0.2 / meter testing as per IEC

62561-2017, Voltage drop:- < 1 volt at no load & dry form, Sulphar

content:- <2%(C) Back fill Compound :- Earthing compound should

be capable to retain moisture for long time Necessary test report

must be submitted. (b)For Electrical installation up to 11 KV in

normal soil.

Length of Pipe : 2.00 mtrs

Back filling Compound :1 no. Bag of 25 Kg.

Supplying & erecting XLPE(IS:7098)(I)-88 ISI unarmoured copper

124 cable 1.1 KV grade to be erected as directed of following size. (L) 4 10.00 426.22 Rmt

core 6 Sq. mm

Making trench in soft soil of suitable width of 90 cm deep for laying

125 cable or locating the fault all over the run and back filling the same 10.00 54.54 Rmt

and making the surface as normal ground.

Covering of cable with second class bricks or cement tiles laid cover

126 the cable crosswise & also on both sides with covering of 7. 5 Cm. 10.00 157.56 Rmt

layer of sand above & below cable (16 bricks per meter)

Supplying & erecting carbon dioxide (CO2) fire extinguisher user of

following capacity with necessary clamps made from 50 x 6 mm

M.S. Flat with nut & bolts grouted in wall complete. [B] For 5.5 /

6.5 KG Capacity

Providing and erecting HOT deep Galvanised iron strip wire 8 to

Providing Abc Type Fire Extinguisher 6 Kg Isi Marked All

Required Fitting Accessories.(M.R.)

Providing and laying polished kota stone slab 25mm thick in risers

of steps,skirting Dedo and pillars laid on 10mm thick cement mortar

130 1:3 (1-Cement : 3 coarse sand) and jointed with gray cement slury 30.40 1127.85 Smt.

mixed with pigment to match the shade of slab including rubbing

and polishing etc. complete.

Description Of Item Quantity Rate Unit Amount

Providing and laying Vitrified tiles 8 to 10 mm thick , 24'' x 24'' in

flooring treads of steps and landing laid on a bed of 12mm thick

131 cement mortar 1:3 (1-cement : 3-coarse sand ) finishing with flush 968.00 1467.72 SMT

pointing in white cement.

Item Code:14008CA,No:14.29(C1),Pageno:131

Total Rs. :

I/We am/are willing to carry out the work at………………….% above/below percent

(Should be written in figures and words) of the estimated rate mentioned above.

Amount of my /our tender works out as under.

Estimated amount put to tender Estimated amount put to tender

Deduct……………………… % below Deduct……………………… % Above

In words In words