Construction of Mini Secretariat building at Palampur in Distt. Kangra, HP (SH- Providing One Number Ten Passengers (Machine Room Less) Electric Traction Elevator therein)

Amount

Providing installation testing and commissioning of electric traction 10 passenger elevator to relevant standard to be erected with following Specifications ,

CAPACITY: 10 Passenger, Approx. 680 Kg.

SPEED (mps):1.0 meter per second.

DRIVE: A.C.Variable voltage variable frequency drive.

Type of machine: Machine Room Less Gear Less.

Stops and Openings: 5 Stops, 5 Opening

Floor Designation: B,G,1,2,3

Car Travel: 16.0 Meter (approx.)

Car Enclosure: Stainless Steel in Hairline Finish, Fluorescent Light, Spot lights & Fan as per our standard Design.

Car Entrance: Center Opening Door in Stainless Steel in Hairline Finish The Car Door shall be Variable Frequency Door Drive with Infra-Red Screen safety.

Landing Entrance: Center Opening Doors with Stainless Steel in Hairline Finish.

Car Size: 1300 mm (W) x 1350 mm (D) x 2200 mm High/ As per IS.

Door Opening: About 800 mm Wide x 2000 mm High.

Elevator well required: 2200 mm wide x 1800 mm.

Machine room: Not Applicable [ MRL Lift].

Elevator pit depth required: 1600mm.

Overhead required: 4000mm.

Main Power Supply: 415 Volts, 3 Phase, 50 Hertz Alternating Current.

Flooring: PVC Flooring.

Signals:Indicator for all landings, floor position indicator for all landings.

Other Features:  Emergency Light and Alarm, Fireman’s Switch, Attendant Function, Over Load Device & Full Load Bypass, Automatic Rescue Device, Dot Matrix Display in COP & LOP, Suspended Ceiling in SS Finish, Infra-Red Curtain, Intercom & Blower.

The prices of complete job as per the specifications above shall be inclusive of steel Items, minor Civil Building works, Scaffolding etc. All sundry fittings, assemblies, accessories, hardware items, foundation bolts, terminal lugs for electrical connections as required, and items which are useful and necessary for proper assembly and efficient working of various components shall be deemed to have been included in this job, whether such items are specifically mentioned in the tender documents or not.

Makes:- Kone/Thyssen/Mitsubshi/OTIS or any other equivalent make approved by Engineer-in-charge.

Structural steel work in Single section of suitable size and dimensions with or without connecting plate including cutting,hoisting,fixing in postion and applying apriming Coat of approved steel primer all complete.Providing & Fabrication load Hooks 3 No , Top of the hoist way & channel on both side the of lift well, as per entire satisfaction and direction of Engineer-in-charge including carriage of material in all leads.

Wiring for light point / fan point / exhaust fan / call bell point with 1.5 Sq. mm. PVC insulated heat resistant flame retardant (HRFR) and low smoke single core (flexible) copper conductor cable in surface/recessed steel conduit and earthing the light point with 1.5 Sq.mm. HRFRLS/PVC insulated single core copper conductor cable as required.

Group C.

Wiring for twin control light point with 1.5 Sq. mm. PVC insulated heat resistant flame retardant (HRFR) and low smoke single core (flexible) copper conductor cable in surface/recessed steel conduit with 2-way, 5/6 amps. piano type switch and earthing the light point with 1.5 Sq.mm. HRFRLS/PVC insulated single core copper conductor cable as required.

Group C.

Wiring for circuit/sub-main with following size PVC insulated heat resistant flame retardant (HRFR) and low smoke single core (flexible) copper conductor cable in surface/recessed steel conduit along with 1 No.HRFRLS/PVC insulated single core copper conductor cable of same size for earthing as required.

2x2.5 Sq. mm.

2x4.0 Sq. mm.

Wiring for circuit / sub-main with 4x4 Sq. mm. PVC insulated heat resistant flame retardant (HRFR) and low smoke single core (flexible) copper conductor cable in surface/recessed steel conduit along with 2 No.4 Sq.mm. (4X4+2X4)HRFRLS/PVC insulated single core copper conductor cable for earthing as required.

Supplying and fixing metal box of 100mmx100mmx60mm deep (nominal size) on surface/recess with suitable size phenolic laminated sheet cover in the front including providing and fixing 5 pin 5/6 amps socket outlet and 5/6 amps, piano type switch, connections, painting etc. as required.

Supplying and fixing metal box of 180mmx100mmx60mm deep (nominal size) on surface/recess with suitable size phenolic laminated sheet cover in the front including providing and fixing 6 pin 15/16 amps socket outlet and 15/16 amps, piano type switch, connections, painting etc. as required.

Supplying and erection of 6 amps. to 32 amps. rating, 10 KA breaking capacity, 240 volts, 'C' curves, miniature circuit breaker of following poles in the existing MCB DB complete with connections etc. as required.

Single pole. 6 Amp

Single pole. 16 Amp

Supplying and erection of 40/50/63 amps rating, 10 KA breaking capacity, 240 volts, 'C' curves, miniature circuit breaker of following poles in the existing MCB DB complete with connections etc. as required:-

Double pole. Cat-A.

Supplying and fixing following rating, four pole, 415 volts, Isolator in the existing MCB DB complete with connections, testing and commissioning etc. as required.

63 Amps. Cat-A.

Supplying and fixing of following way triple pole and neutral, sheet steel MCB distribution board, 415 volts, on surface / recess, with provision to mount 8 module incomer, 2 module sub-incomer and SP MCBs as outgoing, complete with tinned copper bus- bar, wire-set, neutral link, earth bar, din-bar, detachable gland plate, cable, identification labels interconnections, phosphatized and powder painted, including earthing etc. as required:-

Double door-2+4 way (8+6+12),horizontal type

Earthing with copper earth plate 600 mmx600 mmx 3 mm thick, including accessories and providing masonry enclosure with cover plate having locking arrangement and watering pipe etc. ( but without charcoal or coke and salt ) complete as required.

Extra for using salt and charcoal for G.I. or copper plate earth electrode complete as required.

Supplying and laying 8 SWG Copper wire at 0.50 mtr. below ground level for earth electrode conductor, including soldering etc. as required.

Providing and fixing 25mm x 5mm copper strip on surface or in recess for earth connections etc. as required.

Providing, laying and fixing of one No. aluminium conductor, PVC insulated and PVC sheathed, armoured/XLPE power cable, working voltage 1100 volts grade on surface etc. of the required size:-

Armoured cable 25 sq. mm (3.5 core)

Providing and fixing LED Bulk head of following rating made of aluminium housing and it should be compatible with specification i.e. Power Factor > 0.9, Harmonic Distortion <10% and efficacy > 100 Lumens per watt, CRI rating> 80 suitable for input voltage: AC 220-240 V, 50 Hz, complete with all accessories, connections, testing and commissioning etc. as required.

LED Bulk head fitting 10 watt.

Makes:- Panasonic (Cat No PBHM01107)/Bajaj/ Wipro/ C&S or any other make approved by Engineer-in-Charge.

Providing and fixing TP&N switch disconnector fuse unit cubical type, 415/500 volts with 3 No. HBC/HRC fuses, in sheet steel enclosure including drilling holes on the board, connections, earthing the body etc. as required.

63 Amp. Category-A

classic construction company