Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Tender Value
Refer Docs
Closing Date
2 May 2024, 5:30 amClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Barrackpore Division
HINDUSTAN AERONAUTICS LIMITED Barrackpore Division Barrackpore Post Parganas (N) , Dist. 24 W. Bengal - 700 120 Phone : 2592-0157/2592-0163 Fax No : 91-033-2592-2379
RAW MATERIAL
6875
HAL/BKP/IMM/ROHCOMB06/5/2024
Works
Helicopter Complex -Barrackpore Divn-PM-Cheetah-Chetak-Purchase
₹0
Exempted
2 May 2024
4 Apr 2024
4 Apr 2024
2 May 2024
Tender Number: HAL/BKP/IMM/ROHCOMB06/5/2024
Tender Date: 4-Apr-24
Tender Due Date: 02-05-2024 at 23:59 IST
SUPPLY OF RAW MATERIALS
NAME OF THE BIDDER
OFFER REFERENCE & DATE
Sl No. (a) Part No. (b) Part Description (c ) Qty. & UOM (d) Delivery required (e) Currency (f) Offered Qty & UOM (g) Unit Rate in offered UOM (h) Delivery schedule (i) Remarks (j) HSN CODE (k)
1 HALBKPSTR000030082 STEEL ROD 3 MM DIA 35NC6 'HT' 139 METER Immediate
2 HALBKPSTR000060061 STEEL ROD 6 MM DIA35NC6 'HT' AIR 91 98 METER Immediate
3 HALBKPSTR000080056 STEEL ROD 8 MM DIA35NC6 'HT' AIR 91 100 METER Immediate
4 HALBKPSTR000100062 STEEL ROD 10 MM DIA35NC6 'HT' AIR 9 305 METER Immediate
5 HALBKPSTR000120063 STEEL ROD 12 MM DIA35NC6 'HT' 678 METER Immediate
6 HALBKPSTR000140064 STEEL ROD 14 MM DIA35NC6 'HT' AIR 9 365 METER Immediate
7 HALBKPSTR000160065 STEEL ROD 16 MM DIA 35NC6 'HT' 179 METER Immediate
8 HALBKPSTR000600027 STEEL ROD 60 MM DIA35NC6 'A' AIR 9 59 METER Immediate
9 HALBKPSTR000650120 STEEL ROD 65 MM DIA 35NC6 R90 1 METER Immediate
10 HALBKPSTR000700028 STEEL ROD 70 MM DIA35NC6 'A' AIR 9 114 METER Immediate
11 HALBKPSTR000900029 STEEL ROD 90 MM DIA35NC6 'A' AIR 9 21 METER Immediate
12 HALBKPSTR000950029 STEEL ROD 95 MM DIA35NC6 'A' AIR 9 9 METER Immediate
13 HALBKPSTR001000119 STEEL ROD 100 MM DIA 35NC6 R85 10 METER Immediate
14 HALBKPSTR001250118 STEEL ROD 125 MM DIA 35NC6 R85 56 METER Immediate
15 HALBKPSTR001500117 STEEL ROD 150/160 MM DIA 35NC6 "A" 2 METER Immediate
16 HALBKPALT014010007 AL ALLOY TUBE 14X1MM 2024 T3 11 METER Immediate
17 HALBKPALR000250011 ROD AL ALLOY 25 MM DIAAG5 H111 OR 5 45 METER Immediate
18 HALBKPALR000080001 ROD AL ALLOY 8 MM DIAAG3 / H111 AIR 7 METER Immediate
19 HALBKPALF110110034 FLAT AL ALLOY 110X110MM, L-168 2 METER Immediate
20 HALBKPALF036360033 FLAT AL ALLOY 36 MM X 36 MM, L-168 19 METER Immediate
21 HALBKPALF016500011 FLAT AL ALLOY 16 MM x 50 MM 3 METER Immediate
22 HALBKPALS000005028 0.5 MM THK AL SHEET, A5 'ANNEALED' 1600 SQUARE DECIMETER Immediate
23 HALBKPALS000008019 0.8 mm Thk Al Alloy Sheet 1,562.50 SQUARE DECIMETER Immediate
24 HALBKPALS000010020 1.0 mm Thk Al Alloy Sheet 937.50 SQUARE DECIMETER Immediate
25 HALBKPALS000010029 1 MM THK AL SHEET, A5 H111 200 SQUARE DECIMETER Immediate
26 HALBKPALS000012008 AL ALLOY SHEET 1.2 MM THKAU4G1 (T3) 10,312.50 SQUARE DECIMETER Immediate
27 HALBKPALS000012013 AL ALLOY SHEET 1.2 MM THK5086 H111 312.50 SQUARE DECIMETER Immediate
28 HALBKPALS000015031 1.5 MM THK AL SHEET, A5 'ANNEALED' 200 SQUARE DECIMETER Immediate
29 HALBKPALS000016010 AL ALLOY SHEET 1.6 MM THKAU4G1 (T3) 937.50 SQUARE DECIMETER Immediate
30 HALBKPALS000020012 AL ALLOY SHEET 2 MM THKAU4G1 (T3) 1,250.00 SQUARE DECIMETER Immediate
31 HALBKPALS000040027 4.0 mm Thk Al Alloy Sheet 625.00 SQUARE DECIMETER Immediate
32 HALBKPALSL00015007 AL ALLOY SHEET 1.5 MM THKA5 OR L17 3,203.50 SQUARE DECIMETER Immediate
33 HALBKPBRSL00018011 BRASS LAMINATED SHEET, 1.8 mm Thk 74.40 SQUARE DECIMETER Immediate
34 HALBKPSTS000004044 ST STEEL SHEET 0.4 MM THKZ10 CN18-8 800.00 SQUARE DECIMETER Immediate
35 HALBKPSTS000005006 ST STEEL SHEET 0.5 MM THKZ10 CNT 18 600.00 SQUARE DECIMETER Immediate
36 HALBKPSTS000005030 STEEL SHEET 0.5 MM THK 25CD4S 'N' 200.00 SQUARE DECIMETER Immediate
37 HALBKPSTS000006024 STEEL SHEET 0.6 MM THK15CDV6 'HT'AI 400.00 SQUARE DECIMETER Immediate
38 HALBKPSTS000008010 STEEL SHEET 0.8 MM THKXC38 AIR 91 2,730.00 SQUARE DECIMETER Immediate
39 HALBKPSTS000030013 STEEL SHEET 3 MM THKXC38 AIR 9160 700 SQUARE DECIMETER Immediate
40 HALBKPSTS000030038 ST STEEL SHEET 3.0 MM THK Z10 CNT18 400.00 SQUARE DECIMETER Immediate
41 HALBKPTMS000006011 TITANIUM ALLOY SHEET0.6 MM THK 800.00 SQUARE DECIMETER Immediate
42 HALBKPALF008200001 FLAT AL ALLOY 8 MM X 20 MM2024 T351 5 METER Immediate
43 HALBKPSTF020400006 STEEL FLAT 40 X 2035NC6 'HT' AIR 9 16 METER Immediate
44 HALBKPSTF025400010 STEEL FLAT 40/42 X 2535NC6 'HT' AI 3 METER Immediate
45 HALBKPSTF045700009 STEEL FLAT 70 X 45 35NC6 TS=90KG/MM 2 METER Immediate
46 HALBKPSTH000090006 HEXAGONAL STEEL BAR9 MM A/F35NC6-H 396 METER Immediate
47 HALBKPSTH000120014 HEXAGONAL ST BAR 12MM A/F 35NC6HT 168 METER Immediate
48 HALBKPSTH000140010 HEXAGONAL STEEL BAR14 MM A/F35NC6HT 73 METER Immediate
49 HALBKPSTH000170009 HEXAGONAL STEEL BAR17 MM A/F35NC6HT 1 METER Immediate
50 HALBKPSTH000190012 HEXAGONAL STEEL BAR 19 MM A/F 35NC6 1 METER Immediate
51 HALBKPSTS000008031 STEEL SHEET 0.8 MM THK 1.4310 K130 4 METER Immediate
52 HALBKPSTS000010040 STEEL SHEET 1 MM THK XC38 'N' 216 SQUARE DECIMETER Immediate
53 HALBKRILS000050013 RILSON SHEET, 5.0 MM THK 200 SQUARE DECIMETER Immediate
54 HALBKRILS000100015 RILSON SHEET, 10.0 MM THK 122 SQUARE DECIMETER Immediate
Special Commercial Conditions
Sl. Conditions Compliance by supplier
1 Validity of Quote (120 Days)
2 Delivery Terms (FOR HAL Barrackpore)
3 Payment Terms: Direct payment within 30 days of receipt and acceptance
4 LD clause accepted. (Yes/No)
The following detils should be mentioned in the invoice during supply.
1 Net weight of individual line items of the invoices
2 Net weight of the line items of the invoice
3 Gross weight of the invoice (Including Packaging)
4 No. of packets / boxes mentioning size and its weight
Supplier should dispatch following documents (Original Ink Signed And Stamped) to purchase department directly through courier.
1 Invoice (Original ink signed)
2 Certificate of Conformance (Original ink signed)
3 Mill Test Certificate
4 Warranty Certificate (Original Ink Signed)
Note Except MOQ, conditional offers like Stock subject to prior sales (STPS) etc. are not acceptable. Offers received with such conditions will be summarily rejected.
CONDITIONS OF TENDER
Tender No. HAL/BKP/IMM/ROHCOMB06/5/2024 YES
Tender Date. 4-Apr-24 YES
Tender Due Date. 02-05-2024 at 23:59 IST YES
Bidder NOT APPLICABLE
Sl. Conditions Compliance Remarks
1 Price: (For Indian Supplier)
a In case Bidder has entered into Rate Contract with DGS&D, the Rate Contract Reference to be sent to HAL along with the quotation. Bidder is required to certify that prices quoted are the same as applicable to DGS&D and other Government Departments. DGS&D Rate Contract holders should state whether they are agreeable for supply at DGS&D Rate Contract Rates in the event of placement of order by us on HAL's own order form.
b Price quoted should be on F.O.R. Destination basis, for delivery at HAL Barrackpore inclusive of all charges including transit insurance.
d Tenderers should clearly mention whether the prices hold good when the full quantity of enquiry is not ordered but only a part of it. Unless otherwise mentioned, it would be assumed that the rates hold good even when lesser quantities than those enquired of are ordered. Any increase in prices at a later date for ordering lesser quantities will not be agreed to.
2 Taxes: (For Indian Supplier)
a Sales Tax: Rate of Sales Tax or any other Tax chargeable should be clearly indicated in the offer / bid as inclusive in the price quoted or extra. If not indicated, HAL will assume that the rates quoted are inclusive of taxes.
b Excise Duty: Excise Duty will be paid only on production of sufficient documentary evidence or a certificate from the Supplier for having paid the Excise Duty at actual. The present rate and tariff details should be indicated.
b Withholding Tax
i HAL would be deducting at source applicable Income Tax as per Government of India Rules applicable at the time of making payments in respect of services rendered in India. (Generally on the amounts towards services like training, technical assistance offered by the bidder and license fees). As per the Rules, Income tax has to be borne by the recipient of the Income and relevant certificate to this effect will be issued to the bidder on deduction of such amounts, if applicable.
ii Bidder should bear the applicable withholding income tax in India. Tax would be deducted at source by HAL as per DTAA where the bidder could claim the benefit of double taxation in their country as per the bilateral agreement between the two countries. Certificate to this effect would be issued by HAL to enable the bidder to claim the benefit under DTAA.
iii Bidder is required to indicate the PAN No. issued by Indian Income Tax Authorities.
a The quotation must be in the unit in which the quantity is indicated in the enquiry. If it is otherwise, conversion data must be furnished.
b HAL reserves the right to order quantity less than indicated in the enquiry /quoted for by bidder, at the prices quoted, without any reference to the bidder.
c For the Raw materials (in forms of bar, sheet, wires etc.) (applicable for RFQs for raw material) Qty. Tolerance ± 10% acceptable.
4 Supply of Alternative Item:
Applicable descriptive literature/catalogue if any may please be enclosed by the bidder with offer (at least two copies). In case bidder is quoting for an alternative part number it should be confirmed that the offered part is fully interchangeable with the required part.
Where stores offered have a limited shelf-life, kindly indicate the life involved and confirm that in the event of an order from us, only newly manufactured stores with the maximum possible shelf-life at the time of dispatch will be offered for shipment. In respect of rubber items such as seals etc., having cure date, the item should not have been manufactured earlier than 6 months of dispatch.
6 Validity of the Quotation:
Price quoted should be net and unless otherwise specified should remain valid for our acceptance for a minimum of 120 days from the closing date of enquiry and the materials of offered should be kept under provisional reservation for this quotation.
7 Submission of Tender:
a For normal tender: The bidder is required to submit bids directly to HAL either through post/courier in sealed cover with clear marking of bidder details. The cover should be marked with tender no., due date and bidders postal address. Response received, without bearing the bidder address will not be entertained. Bid submitted by bidder’s authorized dealer / distributor/channel partner should accompany with ink signed authorization letter of the bidder to whom tender has been originally issued. In the absence of authorization letter, the bids submitted shall be considered an unsolicited.
b For email tender: The signed copy of bid submitted through E-mail / Fax will be accepted subject to the same being sent to the specified e-mail ID/Fax No. indicated in the tender document. Unsigned copy of bid received through E-mail/Fax will not be considered.
c For e-tender: Response to bid through e-Procurement should be uploaded in the e-portal only.
a Bid received after the due date and time specified in the tender shall be considered as late tender and will not be considered.
b HAL will not be responsible for loss or delay in receipt of tender documents / tender in transit.
c HAL will not be responsible for inability of vendor to upload the tender documents in e-procurement.
d HAL reserves the right to reject late or incomplete tender.
9 Opening of Tender:
a Tender will be opened on next working day of due date. Bidders or their authorized reps. are desirous to attend the tender opening may forward written confirmation with name of authorized person and designation prior to tender opening.
b During tender opening only the important particulars like price, delivery terms will be read out.
10 Tender Evaluation:
a Bid received in different currency will be converted to Indian Rupees. The TT selling rate for foreign currency exchange rate for conversion will be adopted as per the State Bank of India, Shyam Bazar Branch, Kolkata in India as on date of tender opening.
b The tender will be evaluated on line item basis.
c Following load factor will be loaded while comparing the prices: i) Bank charges will be loaded if supplier does not agree HAL payment terms ii) In case of Indian supplier, applicable taxes/ GST should be mentioned explicitly by the vendor in the quotation, either in percentage or in absolute terms. Applicable taxes/ GST, as indicated in the Price Bid, shall be considered for commercial evaluation. In the absence of this input, the offer would be considered all inclusive. Further, vendor must provide GST registration number and HSN code of all the items in the RFQ. iii) In case, if any vendor is not accepting the Liquidated Damages clause, in such cases, maximum LD amount (10%)/ to the extent not agreed LD value, will be loaded in the Comparative Statement, to determine the successful bidder. iv) In case, if any vendor is not accepting the Warranty clause (12 months), in such cases, maximum Warranty amount (2%)/ to the extent not agreed warranty, will be loaded in the Comparative Statement, to determine the successful bidder
d Bid with lowest price conforming to the specification will be considered for placement of order.
e If the bidder considers that tendered quantity is small, the bidder may quote for Minimum Ordering Quantity (MoQ). Commercial evaluation in this case will be done on MoQ x unit price.
f If two or more bidders quote the same price, HAL reserves the right to seek revised offer from the same bidders and placing order on revised L-1 offer. If same situation prevails then HAL reserve the right to place order on any of them.
g To have parallel source of supply the order may be spilt to 2 or 3 sources subject to other bidders agreeing for L-1 price. The distribution of quantity among the bidders will be as per the proportion (to be decided by the tenderer) given below : Qty. distribution among L-1 : L-2 in proportion x% : y% or Qty. distribution among L-1 : L-2 : L-3 in proportion x% : y% : z%
h Conditional discounts will not be considered in evaluation of tender.
a In the case of airborne material, the same should be covered by a Release Note or Airworthiness Certificate countersigned by person/s authorized by Government Airworthiness Certifying Authority.
b Please indicate approximate net weight of each of the item and gross weight and dimension of the package to enable HAL to determine the mode of dispatch.
c Please indicate in your tender, whether stores newly manufactured are offered. Where newly manufactured stores are offered and on inspection it is found that reconditioned stores or parts have been used, such stores will be rejected at the Supplier’s risk and expense.
d Please furnish list of similar equipments supplied in HAL or anywhere in India with customer’s full address, value and telephone/telex etc. (if applicable)
e Please indicate if any training arrangements for item/system in India and factory acceptance test if required. (if applicable)
f Please also indicate necessary onsite technical support during installation of the system at no extra cost.
g Vendors should ensure the availability of spares of the offered products for a period of 10 years.
h Two sets of operation manuals/maintenance manual should accompany the system at no extra cost. (if applicable)
i Please also indicate status of export permit based on the present rules/regulations of your country and normal time frame for obtaining such export permission if an order is placed on you in near future and the same should be covered within the delivery schedule indicated.
j Vendors while submitting the proposal should categorically declare that items quoted by them are their own manufactured products and are not resold (2nd sale). Offers without such declaration are likely to be ignored.
k Quotation should accompany the detailed catalogues and literature.
l Vendor should confi rm that they are the original manufacturer of the stores referred to in this contract and has not engaged any individual or fi rm whether Indian or foreign whatsoever, to intercede, facilitate or in any way to recommend to the Government of India or any of its functionaries, whether offi cially or unoffi cially, the award of the contract to the seller nor has any amount been paid or intended to be paid to any such individual or intended to be paid to any fi rm in respect of any such intercession, facilitation or recommendation, vendor accepts that if it is established that the present declaration is in any way incorrect and if at any later stage it amount/commission to such individual/fi rm, vendor will be liable to pay the similar amount to HAL for engaging such individual/fi rm and making the payment as commission. In addition, vendor will also be debarred from entering into any supply contract with the Ministry of Defence, Government of India for a minimum period of 5 years. Vendors shall also consider cancellation of the contract without any entitlement or compensation to vendors who shall also be liable to refund all payments made by HAL in terms of the contract along with the interest at the London inter bank offer rate(LIBOR)
m The Harmonized System of tariff nomenclature against the items for which quotation is rendered should be indicated.
n For the Raw materials (in forms of bar, sheet, wires etc.) (applicable for RFQs for raw material)
i) Release note/ OEM certificate of conformity with physical and chemical test report is required along with the supply.
ii) Requested to include the Box Charges / Packing Charges / Phytosanitary regulation Charges in the unit quoted price if any. (otherwise indicate separately charges for each item)
o Manufacturer's name and country of origin of the materials offered must be clearly specified. Complete details and illustrated literature must accompany all quotations.
p Vendors should clearly indicate similar equipment supplied on global basis to Aircraft manufacturing industry, to any Division of HAL and other reputed/Govt customers and anywhere in India with customer’s full address, telephone/telefax No., P.O. No., value and year of supply.
q Quotation should be free from correction, over-writing, using correcting fluid etc.
r All drawings (photo/sketches) sent by HAL should be returned with quotations, if bidder is unable to quote HAL drawings/photos/sketches should also be returned immediately along with regret letter.
s HAL is not bound to accept the lowest or any quotation and reserves the right of accepting the whole or any part of the quotation or part of the quantity offered and bidder must supply the same at the rate quoted.
t Vendor shall not be entitled without HAL’s consent to assign or transfer to a third party all or part of the benefi ts or obligations under this contract.
12 Integrity Pact:(If applicable, at present estimated order value exceeding Rs 5 Crs.)
a Bidder shall submit duly signed Integrity Pact in original, strictly as per the format (without any deviation) enclosed with the RFP. Scanned copy to be uploaded with the Bid in case of e-tender and original copy to be sent through post. Bidders not complying with this are liable for rejection and their bids will not be considered for evaluation.
b In case of two bid system, the bidder is required to submit the signed pre-contract IP as part of technical bid, failing which offers are liable for rejection.
c The bidder may approach the IEM nominated only for integrity related issues. Bidder may ask clarification on specific Tender/RFQ/NIT related queries onine only from contact person within the specific period at the following contact details. Hindustan Aeronautics Limited Purchase Dept. Ph. +91 33 2545 1316 +91 33 2540 2129 Fax: +91 33 2592 2379 Contact Person: Debmalya Basu Email: [email protected] Alternative Contact Person: Keshab Barman, SM (Purchase)
Warranty shall be 12 months from the date of acceptance of items at HAL or more as per bidder’s policy. Warranty is after the goods have been taken over by HAL against any defective design, workmanship, materials and non-conformance to intended performance. During warranty period equipment shall be replaced/ repaired free of cost including any to & fro freight/insurance involved. Supplier shall attend to warranty calls within 48 hours notice.
14 POST-WARRANTY SERVICE
Arrangements for after sales service and maintenance (authorized service centre) in India on site during warranty & post warranty period should be clearly indicated providing with name, address, phone, fax, contact person, infrastructure along with spare parts inventory held by your Authorized Technical Service Center. The vendor to indicate the validity period of authorization for the technical service center.
15 Liquidated Damages
In the event of an order, we reserve the right to collect a sum of 0.5% per week of delay, subject to a maximum of 10% as our claim-towards liquidated damages on the undelivered part of the order. In case of tendere not agreeing for LD clause, the maximum LD amount / to the extent not agreed LD value, tobe loaded in the comparative statement, to determine the successful bidder. As well as GST @18% on LD amount will be recovered for the Supplier.
a Deliveries quoted should be firm (or as per the schedule indicated).
b Please confirm whether the item/equipment quoted/ offered is of-the-shelf or to be manufactured specific-to-type. If the items/equipment is manufactured specific-to-type, bidder to quote firm delivery schedule taking into consideration of the period actually required based on the complexity of the equipment. In the event of an order, HAL reserve the right to claim towards liquidated damages on the undelivered part of the order. This clause will be strictly followed by HAL. Therefore your delivery schedule should be firm and definite.
c If installation and commissioning of the equipment is required to be done by bidder at HAL site, bidder to indicate the period required for the above job from the date of intimation of readiness of site at our premises.
i Period required for the delivery/dispatch of equipment and
ii Period required for installation and commissioning of the subject equipment after intimation from HAL about readiness of the site.
The goods on receipt in HAL will be subject to inspection and tests, if necessary and HAL’s decision as regards acceptance/rejection of goods shall be fi nal and binding on the parties.
18 Terms of Payment:
No advance payment will be entertained. In the event of an order, 100% payment will be made within 30 days after inspection and acceptance at our Stores, by RTGS or any other latest Electronic Payment remittance mode.
19 Any order, resulting from the enquiry, shall be governed by all the Terms and Conditions and any party quoting against this enquiry shall be deemed to have read and understood these terms and conditions and to have quoted subject to these terms and conditions.
20 When counter terms and conditions have been offered by a tenderer, HAL shall not be deemed to be governed by such terms and conditions unless specific written acceptance thereof has been given by HAL.
21 Any terms & conditions which has not been the part of the bid or Purchase Order, if put forward in subsequent correspondence, shall not be considered by HAL.
22 Disregard of any instructions, may result in your offer being ignored.
23 Canvassing by tender form, including unsolicited letter on tender submitted or post tender corrections shall render their tenderers liable for rejection.
24 Settlement of Disputes and Arbitration:
All disputes arising out of the contract shall be settled as per Laws of India/ Rules of Arbitration of ICA/ICADR.
25 Immunity to Government of India:
It is understood and agreed that the Government of India is not a party to this agreement and has no liabilities, obligations or rights hereunder. It is expressly understood and agreed that HAL is an independent legal entity with power and authority to enter into contracts solely in its own behalf under the applicable Laws of India and General Principles Contract Law. The vendor shall agree, acknowledge and understand that HAL is not an agent, representative or delegate of the Government of India. It is further understood and agreed that the Government of India is not and shall not be liable for any acts, omissions, commissions, breaches or other wrongs arising out of the contract. Accordingly, vendor expressly waives releases and foregoes any and all actions or claims against the Government of India arising out of this contract, not to sue the Government of India as to any manner, claim, and cause of action or thing whatsoever arising out of or under this agreement.
26 Fall Clause:
a The price charged for the stores supplied under the contract shall be in no event exceed the lowest price at which the Supplier sells the stores or offers to sell stores of identical description to any persons/organizations including the purchaser of any department of the Central Govt. or any Dept. of the State Govt. or any statutory undertaking of the Central or State Govt., as the case may be during the period till the performance of the supply order placed and during currency of the contract is completed.
b If at any time during the said period, the Supplier reduces the sales price, sells or offers to sell such stores to any person/organization including the purchaser or any department of Central Govt. or any Dept. of State Govt., or any statutory undertaking of the Central or State Govt., as the case may be at a price lower than the price chargeable under the contract, he shall forthwith notify such reduction/sale or offer to sale to the Hindustan Aeronautics Limited and the price payable under the contract for the stores supplied after the date of coming into force of such reduction or sale or offer to sale shall stand correspondingly reduced.
27 Agents/Agency Commission:
The seller confirms and declares to the buyer that the seller is the original manufacturer or authorized distributor / stockiest of original manufacturer or Govt. Sponsored / Designated Export Agencies (applicable in case of countries where domestic laws do not permit direct export by OEMS) of the stores referred to in this offer / contract / Purchase order and has not engaged any individual or firm, whether Indian or Foreign whatsoever, to intercede, facilitate or in any way to recommend to Buyer or any of its functionaries, whether officially or unofficially, to the award of the contract / purchase order to the Seller; nor has any amount been paid, promised or intended to be paid to any such individual or firm in respect of any such intercession, facilitation or recommendation. The Seller agrees that if it is established at any time to the satisfaction of the Buyer that the present declaration is in any way incorrect or if at a later stage it is discovered by the Buyer that the Seller has engaged any such individual / firm, and paid or intended to pay any amount, gift, reward, fees, commission or consideration to such person, party, firm or institution, whether before or after the signing of this contract / purchase order, the Seller will be liable to refund that amount to the Buyer. The Seller will also be debarred from participating in any RFQ / Tender for new projects / program with Buyer for a minimum period of five years. The Buyer will also have a right to consider cancellation of the Contract / Purchase order either wholly or in part, without any entitlement or compensation to the Seller who shall in such event be liable to refund all payments made by the Buyer in terms of the Contract / Purchase order along with interest at the rate of 2% per annum above LIBOR (London Inter Bank Offer Rate) (for foreign vendors) and Base Rate of SBI (State Bank of India) plus 2% (for Indian vendors). The Buyer will also have the right to recover any such amount from any contracts / Purchase order concluded earlier with Buyer.
28 Bidder is required to send REGRET REPLY, in case the subject item is not covered in bidders range of products.
29 BRIBES AND GIFTS
Any bribe, commission, gift or advantage given, promised or offered by or on behalf of the Supplier or his parties, agent or servant or any one on his or their behalf to any offi cer, servant, representative of HAL or any person on his or their behalf in relation to the obtaining or to the execution of this or any other contract with HAL shall in addition to any criminal liability which the Supplier may incur, subject the Supplier to the cancellation of this and all other contracts with HAL and also to payment of any loss or damage resulting from any such cancellation. Any question or dispute as to the commission of any offence under the present clause shall be settled by HAL in such manner and on such evidence or information as they may think fit and sufficient and their decision shall be final and conclusive.
30 CONFIDENTIALITY
The Supplier shall hold confidential technical data and information supplied by the Purchaser or on behalf of the Purchaser and shall not reproduce any such technical data or information or divulge the same to any third party without the prior written consent of the Purchaser. The Purchaser shall hold confidential technical data and information supplied by the Supplier or on behalf of the Supplier and shall not reproduce any such technical data or information or divulge the same to any third party without prior written consent of the Supplier except as far as may be necessary for either party to carry out its obligations under this Contract.
31 In the development orders, where technical inputs/assistance is provided to the vendors, the Intellectual Proprietary Rights (IPR) will rest with HAL. Vendor will not directly deal with HAL’s customer for these items.
32 OPTION CLAUSE
The Contract will have an Option Clause, wherein the Buyer can exercise an option to procure an additional 50% of the original contracted quantity in accordance with the same terms & conditions of the present contract. This will be applicable within the currency of contract. The Bidder is to confirm the acceptance of the same for incusion in the contract. It will be entirely the discretion of the buyer to exercise this option or not.
33 REPEAT ORDER CLAUSE
The Contract will have a Repeat Order Clause, wherein the Buyer can order upto 100% quantity of the items under the present contract within six months from the date of supply/successful completion of this contract, the cost , terms & conditons remaining the same. The Bidder is to confirm ascceptance of this clause. It will be entirely the discretion of the Buyer to place the Repeat Order or not. Total quantiy under option and repeat oder clause will not exceed 100% of the contract quantity. .
The contract/order may be terminated under the following circumstances: i. In the event of unsatisfactory performance by the seller during the contract/order period, or any of the information provided by the Seller is found to be untrue or Seller is found to have attempted to influence any person involved with the contract/order through unethical means, the contract/order shall be terminated with 1 month’s advance notice without any financial implication to Buyer. Notwithstanding the foregoing, in cases where it is found that a Seller is engaged in unethical practices, they shall be barred from participating in the future contract/orders for a period of 1 year. ii. If there is change in Buyer requirement, contract/order shall be terminated with 1 month advance notice. The liability of Buyer in this case will be agreed mutually. In the event of termination of contract/order by either party the Seller shall ensure the following: a) IPR’s are transferred to Buyer to enable Buyer to proceed on the work with other Seller. Seller also will render all assistance till the other Seller fully take over the balance work. b) Transfer title and deliver all or any part thereof of the supplies, materials, work-in-process, finished products, Tooling, drawings and data produced or acquired by Seller specifically for the product terminated. iii. The Seller is declared bankrupt or becomes insolvent. iv. The delivery of material is delayed due to causes of Force Majeure by more than 1 month. v. Based on the decision of the Arbitration Tribunal.
35 RISK PURCHASE
The Supplier will supply quality items as per the specification and also the quantity intended in full as per terms and conditions of respective orders. In case the Supplier fails to execute the order either in terms of quality or in quantity, HAL reserves the right to procure from elsewhere at the risk and cost of the Supplier and any extra expenditure incurred due to this purchase is payable by the Supplier.
36 ORIGINAL EQUIPMENT MANUFACTURER
Bidder should be the Original Equipment Manufacturer (OEM)/ Authorized Distributor of the systems/machine intended to be bought through this RFQ. OEM certificate (self declaration certificate) has to be submitted by bidder stating that they are the original manufacturer of the equipment. The authorized distributor should provide the certificate of distributorship from OEM.
a Supplier is required to mention whether they are having registration under MSME. Also mention whether the firm is owned by SC/ST entrepreneur. In case of MSME please mention Udyog Adhar Memorandum (UAM) number failing which bidder will not be able to enjoy the benefits of MSME.
b Participating Micro and Small Enterprises quoting price within price band of L1+15 per cent shall also be allowed to supply a portion of requirement by bringing down their price to L1 price in a situation where L1 price is from someone other than a Micro and Small Enterprises and such Micro and Small Enterprises shall be allowed to supply up to 20 percent of total tendered value.
c 4% Out of 20 per cent shall be earmarked for procurement from Micro and Small Enterprises owned by the Scheduled Caste or the Scheduled Tribe entrepreneurs (Certificate to be enclosed). 2% out of 20 percent shall be earmarked for procurement from Micro and Small Enterprises owned by women entrepreneurs (Certificate to be enclosed).
d In case of more than one such Micro and Small Enterprises, the supply shall be shared proportionately (to tendered quantity).
Tender Number: HAL/BKP/IMM/ROHCOMB06/5/2024
Tender Date: 4-Apr-24
Tender Due Date: 02-05-2024 at 23:59 IST
SUPPLY OF RAW MATERIALS
NAME OF THE BIDDER
OFFER REFERENCE & DATE
Sl No. (a) Part No. (b) Part Description (c ) Qty. & UOM (d) Delivery required (e) Quoted / Not quoted Compliance to sypply required quantity
1 HALBKPSTR000030082 STEEL ROD 3 MM DIA 35NC6 'HT' 139 METER Immediate
2 HALBKPSTR000060061 STEEL ROD 6 MM DIA35NC6 'HT' AIR 91 98 METER Immediate
3 HALBKPSTR000080056 STEEL ROD 8 MM DIA35NC6 'HT' AIR 91 100 METER Immediate
4 HALBKPSTR000100062 STEEL ROD 10 MM DIA35NC6 'HT' AIR 9 305 METER Immediate
5 HALBKPSTR000120063 STEEL ROD 12 MM DIA35NC6 'HT' 678 METER Immediate
6 HALBKPSTR000140064 STEEL ROD 14 MM DIA35NC6 'HT' AIR 9 365 METER Immediate
7 HALBKPSTR000160065 STEEL ROD 16 MM DIA 35NC6 'HT' 179 METER Immediate
8 HALBKPSTR000600027 STEEL ROD 60 MM DIA35NC6 'A' AIR 9 59 METER Immediate
9 HALBKPSTR000650120 STEEL ROD 65 MM DIA 35NC6 R90 1 METER Immediate
10 HALBKPSTR000700028 STEEL ROD 70 MM DIA35NC6 'A' AIR 9 114 METER Immediate
11 HALBKPSTR000900029 STEEL ROD 90 MM DIA35NC6 'A' AIR 9 21 METER Immediate
12 HALBKPSTR000950029 STEEL ROD 95 MM DIA35NC6 'A' AIR 9 9 METER Immediate
13 HALBKPSTR001000119 STEEL ROD 100 MM DIA 35NC6 R85 10 METER Immediate
14 HALBKPSTR001250118 STEEL ROD 125 MM DIA 35NC6 R85 56 METER Immediate
15 HALBKPSTR001500117 STEEL ROD 150/160 MM DIA 35NC6 "A" 2 METER Immediate
16 HALBKPALT014010007 AL ALLOY TUBE 14X1MM 2024 T3 11 METER Immediate
17 HALBKPALR000250011 ROD AL ALLOY 25 MM DIAAG5 H111 OR 5 45 METER Immediate
18 HALBKPALR000080001 ROD AL ALLOY 8 MM DIAAG3 / H111 AIR 7 METER Immediate
19 HALBKPALF110110034 FLAT AL ALLOY 110X110MM, L-168 2 METER Immediate
20 HALBKPALF036360033 FLAT AL ALLOY 36 MM X 36 MM, L-168 19 METER Immediate
21 HALBKPALF016500011 FLAT AL ALLOY 16 MM x 50 MM 3 METER Immediate
22 HALBKPALS000005028 0.5 MM THK AL SHEET, A5 'ANNEALED' 1600 SQUARE DECIMETER Immediate
23 HALBKPALS000008019 0.8 mm Thk Al Alloy Sheet 1,562.50 SQUARE DECIMETER Immediate
24 HALBKPALS000010020 1.0 mm Thk Al Alloy Sheet 937.50 SQUARE DECIMETER Immediate
25 HALBKPALS000010029 1 MM THK AL SHEET, A5 H111 200 SQUARE DECIMETER Immediate
26 HALBKPALS000012008 AL ALLOY SHEET 1.2 MM THKAU4G1 (T3) 10,312.50 SQUARE DECIMETER Immediate
27 HALBKPALS000012013 AL ALLOY SHEET 1.2 MM THK5086 H111 312.50 SQUARE DECIMETER Immediate
28 HALBKPALS000015031 1.5 MM THK AL SHEET, A5 'ANNEALED' 200 SQUARE DECIMETER Immediate
29 HALBKPALS000016010 AL ALLOY SHEET 1.6 MM THKAU4G1 (T3) 937.50 SQUARE DECIMETER Immediate
30 HALBKPALS000020012 AL ALLOY SHEET 2 MM THKAU4G1 (T3) 1,250.00 SQUARE DECIMETER Immediate
31 HALBKPALS000040027 4.0 mm Thk Al Alloy Sheet 625.00 SQUARE DECIMETER Immediate
32 HALBKPALSL00015007 AL ALLOY SHEET 1.5 MM THKA5 OR L17 3,203.50 SQUARE DECIMETER Immediate
33 HALBKPBRSL00018011 BRASS LAMINATED SHEET, 1.8 mm Thk 74.40 SQUARE DECIMETER Immediate
34 HALBKPSTS000004044 ST STEEL SHEET 0.4 MM THKZ10 CN18-8 800.00 SQUARE DECIMETER Immediate
35 HALBKPSTS000005006 ST STEEL SHEET 0.5 MM THKZ10 CNT 18 600.00 SQUARE DECIMETER Immediate
36 HALBKPSTS000005030 STEEL SHEET 0.5 MM THK 25CD4S 'N' 200.00 SQUARE DECIMETER Immediate
37 HALBKPSTS000006024 STEEL SHEET 0.6 MM THK15CDV6 'HT'AI 400.00 SQUARE DECIMETER Immediate
38 HALBKPSTS000008010 STEEL SHEET 0.8 MM THKXC38 AIR 91 2,730.00 SQUARE DECIMETER Immediate
39 HALBKPSTS000030013 STEEL SHEET 3 MM THKXC38 AIR 9160 700 SQUARE DECIMETER Immediate
40 HALBKPSTS000030038 ST STEEL SHEET 3.0 MM THK Z10 CNT18 400.00 SQUARE DECIMETER Immediate
41 HALBKPTMS000006011 TITANIUM ALLOY SHEET0.6 MM THK 800.00 SQUARE DECIMETER Immediate
42 HALBKPALF008200001 FLAT AL ALLOY 8 MM X 20 MM2024 T351 5 METER Immediate
43 HALBKPSTF020400006 STEEL FLAT 40 X 2035NC6 'HT' AIR 9 16 METER Immediate
44 HALBKPSTF025400010 STEEL FLAT 40/42 X 2535NC6 'HT' AI 3 METER Immediate
45 HALBKPSTF045700009 STEEL FLAT 70 X 45 35NC6 TS=90KG/MM 2 METER Immediate
46 HALBKPSTH000090006 HEXAGONAL STEEL BAR9 MM A/F35NC6-H 396 METER Immediate
47 HALBKPSTH000120014 HEXAGONAL ST BAR 12MM A/F 35NC6HT 168 METER Immediate
48 HALBKPSTH000140010 HEXAGONAL STEEL BAR14 MM A/F35NC6HT 73 METER Immediate
49 HALBKPSTH000170009 HEXAGONAL STEEL BAR17 MM A/F35NC6HT 1 METER Immediate
50 HALBKPSTH000190012 HEXAGONAL STEEL BAR 19 MM A/F 35NC6 1 METER Immediate
51 HALBKPSTS000008031 STEEL SHEET 0.8 MM THK 1.4310 K130 4 METER Immediate
52 HALBKPSTS000010040 STEEL SHEET 1 MM THK XC38 'N' 216 SQUARE DECIMETER Immediate
53 HALBKRILS000050013 RILSON SHEET, 5.0 MM THK 200 SQUARE DECIMETER Immediate
54 HALBKRILS000100015 RILSON SHEET, 10.0 MM THK 122 SQUARE DECIMETER Immediate
Sl. No. Conditions Compliance by supplier
1 Items will be cleared after inspection from QC department of HAL,Barrackpore division.
2 Identification marks should appear on items.
3 Material should be packed as per airworthy standard.
4 Material should be supplied with certificate of conformity and mill test certificate. All the materials need to be 100% traceable.
5 If supplier is offering any alternative specification. That must be airworthy standard and supplier should provide supporting technical document for that.
6 Supplier has to provide warranty certificate for 12 months for the items from the date of receipt and acceptance of items at HAL Barrackpore.
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
raw.json
RAW_JSON
PRICE_BID_ROHCOMB06_5.xlsm
TENDER_DOCUMENT • 0.02 MB
CONDITIONS_OF_TENDER_ROH_ROHCOMB06_5.xlsm
TENDER_DOCUMENT • 0.02 MB
TECHNICAL_BID__ROHCOMB06_.xlsm
TENDER_DOCUMENT • 0.01 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .