Construction of 20 Headed Sweepers Barrack Vertical Extension of staff Barrack and allied works (Supply and Installation of Furniture for Dinning Hall both UT and Convict and Modular Office Furniture at Central Correctional Home Baruipur). (1st Call)

Amount

Self Standing Executive Table : Self standing table made of 25 mm thick MDF Board interior grade conforming to IS 12823 : 1990 and the top with laminate of thickness 0.7 mm as per IS 12823 : 1990 of approved brand All components like tops, sides etc. are finished with machine pressed 2mm thick PVC EDGE binding tape glued with hot melt EVA glue. (2100 X 900 X 750)mm

Self Standing Executive Table : Self standing table made of 25 mm thick MDF Board interior grade conforming to IS 12823 : 1990 and the top with laminate of thickness 0.7 mm as per IS 12823 : 1990 of approved brand All components like tops, sides etc. are finished with machine pressed 2mm thick PVC EDGE binding tape glued with hot melt EVA glue. (1350 X 600 X 750)mm

Self Standing Computer Table : Self standing table made of 25 mm thick MDF Board interior grade conforming to IS 12823 : 1990 and the top with laminate of thickness 0.7 mm as per IS 12823 : 1990 of approved brand All components like tops, sides etc. are finished with machine pressed 2mm thick PVC EDGE binding tape glued with hot melt EVA glue. (1200 X 600 X 750)mm

Self Standing Small Table : Self standing table made of 25 mm thick MDF Board interior grade conforming to IS 12823 : 1990 and the top with laminate of thickness 0.7 mm as per IS 12823 : 1990 of approved brand All components like tops, sides etc. are finished with machine pressed 2mm thick PVC EDGE binding tape glued with hot melt EVA glue. (1050 X 600 X 750)mm

Self Standing Small Table : Self standing table made of 25 mm thick MDF Board interior grade conforming to IS 12823 : 1990 and the top with laminate of thickness 0.7 mm as per IS 12823 : 1990 of approved brand All components like tops, sides etc. are finished with machine pressed 2mm thick PVC EDGE binding tape glued with hot melt EVA glue. (900 X 600 X 750)mm

Side Unit : Supplying of low height side unit with shelves made out of 18 mm MDF Board on all sides including shutters, except back. Back shall be made out of 9 mm Prelamitated Particle Board. It should have a PVC edge bending. The entire structure should be completed with proper hardware and fittings as necessary. (900 X 450 X 750)mm.

Side Unit : Supplying of low height side unit with shelves made out of 18 mm MDF Board on all sides including shutters, except back. Back shall be made out of 9 mm Prelamitated Particle Board. It should have a PVC edge bending. The entire structure should be completed with proper hardware and fittings as necessary. (1200 X 450 X 750)mm.

Pedestal: Providing and positioning of pedestal storage unit (720high x 450wide x 450depth) made out of MDF Board of 19mm thickness with PVC edge banding, and 25mm thick post formed board on the top. The unit will have two pencil drawer and one filing drawer fixed with drawer chanel and with central locking system.1D+1F

Director Chair: (Net Back) Revolving Mesh Back Chair High Back: 1. SEAT ASSEMBLY: The seat should be made up of 1.4 ± 0.1cm thk. hot pressed plywood upholstered with fabric and moulded poliyurethine foam. . SEAT SIZE: 50.0 cm. (W) x 49.5 cm. (D), BACK ASSEMBLY: The Back should be made up of two part assembly with mesh fabric made up of back outer injection moulded glass filled polyamid and back inner injection moulded glass filled polypropylene. The back should have adjustable lumber support made of injection moulded polypoxymethelene BACK SIZE : 48.0 cm. (W) x 54.5 cm. (H) 2. HIGH RESILIENCE (HR) POLYURETHANE FOAM: The HR polyurethane foam should be moulded with density =55+/-2 kg/m³ and hardness 16 ± 2 kgf for 25% compression. 4. ARMRESTS :The armrests should be made of glass filled polyamide with PU arm top. The arm rest should have four way adjustmane i.e. height adjustment, To-Fro movement, side to side & swival movement, 5. Mechanism: The chair mechanism should be designed with the following features. • 360° revolving type. • Auto balance syncro tilt . • 4-position locking with anti-shock feature. The chair shoud have seat depth adjustmen ranging 4.5 ± 5cm 6. Head Rest : The Head rest should be made injection moulded polyamide upholstered with foam and fabric. Headrest assembly should have adjustment of 5 ± 0.5 cm 7. PNEUMATIC HEIGHT ADJUSTMENT: The pneumatic height adjustment has an adjustment stroke of 9.0 ± 0.3 cm. 9. PEDESTAL ASSEMBLY: The pedestal should be injection moulded polyamide fitted with 5 nos. twin wheel castors. The pedestal pitch-center dia should be ∅67 ± 0.5 cm 10. TWIN WHEEL CASTORS: The twin wheel castors should be injection moulded polyamide.

Executive Chair : Revolving Mesh Back Chair High Back: 1. SEAT ASSEMBLY: The seat should be made up of 1.4 ± 0.1cm thk. hot pressed plywood upholstered with fabric and moulded poliyurethine foam. The chair should have Seat depth adjustment of 5 ± 0.3cm integrated in the seat through a sliding mechanism . SEAT SIZE: 50.0 cm. (W) x 49.5 cm. (D), BACK ASSEMBLY: The Back should be made up of injection moulded glass filled polyamid upholstered with mesh fabric. The back should have adjustable lumber support made of injection moulded polypropylene BACK SIZE : 50.0 cm. (W) x 68 cm. (H) 2. HIGH RESILIENCE (HR) POLYURETHANE FOAM: The HR polyurethane foam should be moulded with density =55+/-2 kg/m³ and hardness 16 ± 2 kgf for 25% compression. 4. ARMRESTS :The armrests should be made of glass filled polyamide with PU arm top. The arm rest should have three way adjustmane i.e. height adjustment, To-Fro movement & swival movement 5. Mechanism: The chair mechanism should be designed with the following features. • 360° revolving type. • Single point control. • Center-pivot for tilt . • Tilt tension adjustment. • 3-position locking with anti-shock feature. 6. Head Rest : The Head rest should be made injection moulded polypropylene upholstered with foam and fabric. Headrest assembly should have adjustment of 6 ± 0.1 cm 7. PNEUMATIC HEIGHT ADJUSTMENT: The pneumatic height adjustment has an adjustment stroke of 9.0 ± 0.3 cm. 9. PEDESTAL ASSEMBLY: The pedestal should be high pressure die case polished aluminium and fitted with 5 nos. twin wheel castors. The pedestal pitch-center dia should be ∅65 ± 0.5 cm 10. TWIN WHEEL CASTORS: The twin wheel castors should be injection moulded in black black glass filled in polyamide.

Visitor Chair : Non Revolving Chair: The chair should be tubular base cussioned chair, the seat and back should be made up of 1.2 ±0.1cm. thick hot-pressed plywood and upholstered with .fabric upholstery covers and moulded Polyurethane foam. The back foam should be designed with contoured lumbar support for extra comfort. The seat has extra thick foam on front edge to give comfort to popliteal should be a. BACK SIZE 47.5 cm. (W) x58.0 cm (H) SEAT SIZE 47.0 cm. (W) x 48.0 cm. (D) The cussions should be made from HIGH RESILIENCE (HR) POLYURETHANE FOAM: The HR polyurethane foam should be moulded with density = 45±2 kg/m3 and hardness load 16 ± 2 kgf for 25% compression. The ARMRESTS should one-piece armrest and should be injection moulded from black Co-polymer Polypropylene. The tubular frame should be powder coated ( DFT 40-60 microns ) tubular frame should be cantilever type & made of 0 2.54 ±0.03cm. x 0.2 ±0.016cm.thk. M.S. ER.W. Tube.

Medium Net Back Chair: Revolving Mesh Back Chair Mid Back: 1. SEAT/BACK ASSEMBLY: The seat should be made up of 1.2 ± 0.1cm thk. hot pressed plywood OCP-QLTA-PL14-18.The Back should be made up of injection moulded glass filled nylon & upholstered using Net fabric with high tenacity yarn. SEAT SIZE(Standard Seat Depth): 47.0 cm. (W) x 49.5 cm. (D) BACK SIZE :45.0 cm. (W) x 65.3 cm. (H) 2. HIGH RESILIENCE (HR) POLYURETHANE FOAM: The HR polyurethane foam should be moulded with density =55+/-2 kg/m³ and hardness 16 ± 2 kgf for 25% compression. 4. ARMRESTS (FIXED):The armrests should be made of plastic injection moulded nylon with textured top. 5. LUMBAR SUPPORT ASSEMBLY: The Lumbar support consshould be ts of polypropylene pad with moulded polyurethane foam & covered with polyester fabric. The Height of Lumbar pad can be adjusted through two projecting knobs provided on the rear side of the pad. Lumbar pad has an adjustment of 8.0 ± 0.5 cm in height. 6. FRONT PIVOT SYNCHRO mechanism: The adjustable tilting mechanism should be designed with the following features. • 360° revolving type. • Single point control. • Front-pivot for tilt with feet resting on ground ensuring more comfort. • Tilt tension adjustment. • 4-position locking with anti-shock feature. • Seat/back tilting ratio of 1:2. 7. PNEUMATIC HEIGHT ADJUSTMENT: The pneumatic height adjustment has an adjustment stroke of 10.0 ± 0.3 cm. 8. PEDESTAL ASSEMBLY: The pedestal should be injection moulded in black 30% glass-filled Nylon and fitted with 5 nos. twin wheel castors. The pedestal pitch-center dia should be ∅66.1 ± 0.5 cm (76.1 ± 1.0 cm. with castors). 9. TWIN WHEEL CASTORS: The twin wheel castors should be injection moulded in black Nylon.

Key Board Tray & CPU Trolley: Workstation should be provided with Metal Key board Pull Out tray. And CPU trolley on castors wheel. Workstation should be provided with Metal Key board Pull Out tray of size 522mm W X 415mmD X 110mm H. The metal tray is made of 0.9mm thick MS CRCA ‘D’ grade as per IS:513. The Ball slides are made of combination of 1.2mm and 1.5mm thk toll formed CRCA ‘D’ grade as per IS:513. A retro fit mouse pad along with Key board MS Sheet should be provided which is made of 0.9mm thk CRCA ‘D’ grade as per IS:513. CPU trolley on castors wheel will be part of each workstation. The tray should be made of 1mm thk MS CRCA sheet and side supports are made of 0.8mm thk MS CRCA sheet. Castors should be injection moulded in black nylon.

Patient Sheet Bed without castors: Overall dimension: (L) 1984 x (W) 990 x (H) 563mm, Head board & foot board: Head & Foot board should be made of blow molded Poly propylene with anti microbial additives . Head board and foot board should be with metal inserts to mound it on bed frame. Removable PP head board and foot board should have cut outs , for better gripping. Lying surface: Lying surface must be made of CRCA sheet with thickness of 1 mm & must be powder coated with anti microbial & anti rust coating. It should consists of mattress retainer to define the mattress position. Bottom frame:ERW round & rectangular tubes should be used with thickness of 1.6 mm. Sleek base frame with large clear space & improved ground clearance to be given with long base structure to provide greater stability. Understructure:ERW round tubes should be used with thickness of 2mm with section 32mm Top frame:HR MS flat sheet of thickness 1mm should be used Powder coating:Anti rust & thermosetting epoxy polyester powder coating should be used. All powder coating must be in Ral White.

Sheet Bed Mattress Providing and Supplying SHEET BED MATTRESS 75MM The bed should be provided with 40 density 100 mm thick Single section PU foam mattress which should be covered by heavy helium material which is water proof, flame retardant, vapour & X-ray permeable. The zip & stiches for the mattress cover should be concealedThe manufacturer should compilant with ISO 9001:2015, 14001:2015, 13485:2003 & OHSAS 18001:2007 and CE certification.The work shall be carried as per the instructions of engineer in charge.

Personal Locker Unit for 12 Locker: Staff Personal locker unit with 12 locker with pad lock arrangement. Overall size should be 1140mm(W)x450mm(D)x1830mm(H). Locking shall have 10 Lever cam lock with lock lever plus option of hasp arrangement . Material shall be CRCA 0.6 mm thickness . Construction shall be Rigid Knockdown construction , shelf shall be uniformly distributed load capacity per each shelf level is 35 Kg maximum . Finish shall be epoxy polyester powder coated to the thickness of 50 microns . Handle/Label holder shall be Aesthetically appealing Snap fit ABS plastic handle . Ventilation shall be attractive punched pattern for ventilation .

Modular Partition : 50 mm thk Aluminium extrusion modular partition based of 1180 mm height. ( White Powder Coated ) Specification : The entire structural frame viz. horizontals and verticals are made of 50mm thick high quality aluminum extruded interlocking sections. Levelers are provided to overcome unevenness in the flooring. The top, vertical and corner trims are available in standard powder coating ( White ) finish of international standards. Main Spine : 50mm thk with Magnetic Fabric Board above table top upto 300 mm. / 450mm. height.

Steel Almirah : Rack with 5 Compartments of 4 no. of shelves. Distance between each shelf will be 360 mm. These 4 shelves should be hanging arrangement (adjustable). Standard lock and 2 sets of keys. The thickness of the Almirah sheet shall be 18 SWG. The body of the Almirah shall be manufactured from cold rolled MS sheet (CRCA Sheet) with Antirust treatment and shall be finished with powder coating. The quality of used M.S sheet for making Almirah shall be free from any pitting and corrosion etc. Overall size: 1980 mm (H) x 915 mm (W) x 485 mm (D)

Single Side Work Station: (1200X 600 X 750)mm. Product : 50 mm thk Aluminium extrusion modular partition based of 1180 mm height. ( White Powder Coated ) Specification : The entire structural frame viz. horizontals and verticals are made of 50mm thick high quality aluminum extruded interlocking sections. Levelers are provided to overcome unevenness in the flooring. The top, vertical and corner trims are available in standard powder coating ( White ) finish of international standards. Main Spine : 50mm thk with Magnetic Fabric Board above table top upto 300 mm. / 450mm. height. Wire Management : Cable duct on the scuting(w/o socket) below table top for Power and Data. Table Top : Supply of 25 mm thick Plain MDF Board interior grade conforming to IS 12823 : 1990 and the top with laminate of thickness 0.7 mm as per IS 12823 : 1990 of approved brand All components like tops, sides etc. are finished with machine pressed 2mm thick PVC EDGE binding tape glued with hot melt EVA glue. Gable End : Supply of 18mm thick Plain MDF Board interior conforming to IS 12823 : 1990 and the gable end with laminate of thickness 0.7 mm as per IS 12823 : 1990 of approved brand All components like gable end and 6mm froshted glass with necessary hardwere fixing on uper the table top.

Overhead Filing Storage/ Wall Hanging Storage (750mm. Ht.) : Fabricating and supplying of Medium height storage unit with shelves made out of 18 mm Commercial Ply Board on all sides including shutters, except back. Back shall be made out of 9 mm Commercial Ply Board. It should have a PVC edge bending. The entire structure should be completed with proper hardware and fittings as necessary

Full Ht. Filing Storage/Rack (2400nn ht.) : Fabricating and supplying of Medium height storage unit with shelves made out of 18 mm Commercial Ply Board on all sides including shutters, except back. Back shall be made out of 9 mmCommercial Ply Board. It should have a PVC edge bending. The entire structure should be completed with proper hardware and fittings as necessary

SS Canteen Table & Bench - Table Size (1800 x 900 x 750)- 1 no, Bench Size (1750 x 330 x 510) - 2 nos attached in a single frame with SS-202 Tube (40 SQ x 1.6 mm thk) vertical post and cross support made of SS-202, tube of 25.4 sq. x 1.2 mm thk. Top of the table must be of SS-304 brush finish 1.0 mm thk.

NUNDYS

DECOR-X INTERIOR PVT.LTD

SARAMA STEEL FURNITURE

WELL DECOR

DESIGN-M