REPAIR TO DRAINAGE SYSTEM OF CERTAIN PLACES AT DGRE RDC AND MES AREA AT MANALI.

Amount

Demolition of exisiting damaged stone/Brick/ Concrete Block masonary built in cement mortar including all quoins, arches, pillars etc complete all as specified and directed by Engineer-In- Charge

Excavation in trenches n exc 1.5m wide and n exc 1.50m in depth for foundation etc and getting out in hard/dense soil complete all as specified and directed by Engineer-In- Charge.

M&L for Pre-cast cement concrete block 1:3:6 type C1 (using 20mm graded aggregate) masonry with solid blocks, exc. 10 cm in width and setting in cement mortar 1:6, complete all as specified and directed by Engineer-In- Charge.

Material & labour for random rubble stone masonary , uncoursed well bounded, bedded and soilidly hearted in cement mortar (1:4) completed all specified and directed by Engineer-in-Charge.

Taking down cement plaster on RR stone/brick masonry walls,including raking out joints,hacking for key,scrubbing down with water etc complete all as specified and directed by Engineer-In- Charge.

M&L for rendering 15mm thick in CM 1:4 on brick work or concrete surface of wall and finished surface even and smooth without using extra cement complete all as specified and directed by Engineer-In- Charge.

Demolition of cement concrete(reinforced) in ground floors and pavings n exc 15 cm thickness (below or above ground level) complete all as specified and directed by Engineer-In- Charge.

M&L for providing pre cast RCC 1:2:4 type B-1 using 20 mm graded stone aggregate as in cover slab and man hole covers etc complete all as specified and directed by Engineer-In- Charge.

M&L for mild steel TMT bars 10 mm dia and over cut to length and bent to shape required and binding with mild steel wire dia not less than 0.9 mm (annealed) complete all as specified and directed by Engineer-In- Charge.

Demolition of plain cement concrete of any description and in any position not otherwise specifically provided for complete all as specified and directed by Engineer-In- Charge.

M&L for 75mm thick cement concrete 1:3:6 type C2 using 40mm graded stone aggregate as in plinth protection finished even and fair without using extra cement complete all as specified and directed by Engineer-In- Charge.

M&L for PCC 1:3:6 type C2 using 40 mm graded stone aggregate as in foundation filling and mass concrete complete all as specified and directed by Engineer-In- Charge.

M&L for PCC 1:2:4 type B1 using 20mm graded stone aggr as in coping benching and surface channel finished fair and even incl necessary form work complete all as specified and directed by Engineer-In- Charge.

Dismantling of stone slabs and tiles of any description or thickness in floors, platform, aprons etc., laid, bedded and pointed, in any mortar complete all as specified and directed by Engineer-In- Charge.

M&L for concrete tiles 30cmx30cmx25 mm thick , machine pressed set, jointed and pointed in neat cement slurry in floors with grey cement and no pigment and cut and polished including 20mm thick screed bed in CM (1:6) complete all as specified and as directed by Engr-in-Charge.

Ditto all as per item No.15 above but except tiles.

M & L for cement concrete 1:4:8 type D-2, 75 mm thick as in sub base floors complete all as specified and directed by Engineer-In- Charge.

Extra for forming fair finished drain or channel 50 cm inner girth in cement concrete, using extra cement, including forms, moulds, mitred/stopped end etc., complete all as specified and directed by Engineer-In- Charge.

M & L for Preparation of newly plastered wall surfaces and applying two coasts of cement base paint. complete all as specified and directed by Engineer-In- Charge.

Returning filling in, incl spreading levelling watering and well ramming in layers n exc 25cm (after the pipes have been laid and tested) in soft/loose soil complete all as specified and directed by Engineer-In- Charge.

Removing excavated material not exceeding 50M and depositing where directed at a lavel not exceeding 1.5m above the starting point, soil complete all as specified and directed by Engineer-In- Charge.

M/S. Vyas Vatika Constructions co.