Reconductoring 11KV Covered Conductor From Ezhamkulam to Kandanchira (CW-4598-202526-41) under Electrical Section,Kulathupuzha under Electrical Division Punalur

Providing one Coil Earth using GI earth wire, digging separate pit at standard distance away from the pole/ structure &back filling

Providing one Earth using earth pipe incl. digging separate pit at standard distance away from the pole/structure & back filling.

Fitting one Additional 2.4m/3m Channel cross arm (75x40x6mm), in existing 11KV DP incl. conveyance of materials.

Transporting poles by hired vehicle to a distance up to 5km and carrying up to 4 poles excluding loading & unloading

Renewing one 1.8 Channel arm on the 11kV pole incl. dismantling and conveyance

Fitting one Additional 75x40mm, 1.8m channel cross arm in existing single pole incl. conveyance of materials

Renewing one V cross arm on the 11kV pole incl. dismantling and conveyance

Straightening one slanted 11 kV pole after unbinding the line and rebinding the line after work

Straightening one slanted 11 kV Cut pole after lowering down the existing line and stringing the line after work

Fitting and erecting one HT PSC type pole in position incl. fitting cross arm, digging & back filling pit,drawing earth leads

Loading HT PSC pole from the stacking place and unloading the same at work site (transport by vehicle).

Fitting and providing one HT stay for 11KV pole incl. digging and back filling pit

Stringing of one km 3PH 11kV line with XLPE Insulated ACSR Racoon

Fitting one set (3 No) LA and giving connections excluding earthing

Drilling hole of various sizes on existing Channel/Cross arm

Renewal of existing damaged/old 11 kV Stay with new stay in place incl. excavation and backfilling of pit and conveyance

Renewal of existing damaged/broken old 11 kV Stay to the existing stay rod

Additional rate for excavation of one pit for HT poleHT stay in Hard Laterite

Dismantling (without damage) one km 11 kV line (3 conductors),cross arm,insulators,disc,rolling the conductor and stacking

Additional rate for reinstalling LT line on the renewed 11 kV pole having both HT and LT (HT/LT) lines

Insertion of one HT PSC Pole in existing line incl. digging and backfilling pit ,fitting cross arm,insulators,binding etc

Additional rate for refitting/ redoing one Disc set while renewing any type of 11 kV cut pole

Dismantling ( without damage) one LT PSC/RCC pole after disconnecting stays, strut, etc. and stacking the same

Conveyance of one km 11 kV line materials from section store /stacking place to the work site (excluding poles)

Renewing one damaged cross arm with 100 x 50mm,2.4/3m Channel cross arm on the 11 kV DP incl. conveyance of materials

Please Enable Macros to View BoQ information