Loading…
Loading…
| # | Company | Quoted % | Amount | Rank | Status |
|---|---|---|---|---|---|
| 1 | L1₹3.1 LAdmitted-Finance UZHATHIL VEEDU CHEMPANARUVI POOYAPPALLY GRAMAPANCHAYATH | IDUKKI | KERALA | 685533 | +2.90% | ₹3.1 L | L1 | Admitted-Finance |
| 2 | L2₹3.3 L+₹21,069.61 (6.90%)Admitted-Finance | +10.00% | ₹3.3 L+₹21,069.61 (6.90%) | L2 | Admitted-Finance |
Tender Value
₹3.5 L
EMD Value
₹8,775
Closing Date
14 Sept 2026, 5:00 pmClosed
Divisional Forest Officer Konni
Divisional Forest Officer Konni. PIN 689691
Estimate for the cost of urgent Maintenance of Kadampupara VSS Building under Mannarappara Range during 2026-27
2026_FD_868149_1
KND-1634306/25
Open Tender
Civil Works - Buildings
Percentage
60 days
Mannarappara
Please Refer Tender Notice
8 documents required · 8 mandatory
₹870
Yes
₹8,775
Yes
17 Sept 2026
7 Sept 2026
16 Sept 2026
7 Sept 2026
14 Sept 2026
7 Sept 2026
This is a percentage-rate BOQ. The schedule below shows estimated quantities and rates. Bidders quote a single percentage above or below the total estimated cost.
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount |
|---|---|---|---|---|---|
| 2 | Detailed Estimate | - | - | - | - |
| 3 | 15.28.2
Dismantling roofing including ridges, hips, velleys and gutters etc., and stacking the
material within 50 metres lead of :Asbestos cement Sheet | 63.3 | sqm | 79.97 | ₹5,062.1 |
| 4 | 10.16.1
Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses
etc., including cutting, hoisting, fixing position and applying a priming coat of
approved steel primer, including welding and bolted with special shaped washers etc.
complete.Hot finished welded type tubes | 633.41 | kg | 194.27 | ₹1,23,052.17 |
| 5 | 2.8.1
Earth work in excavation by mechanical means (Hydraulic excavator) /manual means
in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan),
including dressing of sides and ramming of bottoms, lift up to 1.5 m, including getting
out the excavated soil and disposal of surplus excavated soil as directed, within a lead
of 50 m.All kinds of soil | 0.05 | cum | 359.97 | ₹19.44 |
| 6 | 4.1.3
Providing and laying in position cement concrete of specified grade excluding the cost
of centering and shuttering - All work up to plinth level:1:2:4 (cement : 2 coarse sand
(zone-III)derived from natural sources : 4 graded stone aggregate 20 mm nominal size
derived from natural sources) | 0.05 | cum | 9,235.97 | ₹498.74 |
| 7 | 13.81.2
Dis tempering with Ist quality acrylic distemper, having VOC (Volatile Organic
Compound) content less than 50 grams /litre, of approved brand and manufacture,
including applying additional coats wherever required, to achieve even shade and
colour.Two coats | 159.57 | sqm | 112.89 | ₹18,013.86 |
| 8 | 11.41.1
Providing and laying vitrified floor tiles in different sizes (thickness to be specified by
the manufacturer) with water absorption less than 0.08% and conforming to IS :
15622, of approved make, in all colours and shades, laid on 20 mm thick cement
mortar 1:4(1 cement : 4 coarse sand), including grouting the joints with white cement
and matching pigments etc., complete.Size of Tile 500x500 mm. | 34.18 | sqm | 1,673.31 | ₹57,193.74 |
| 9 | 12.51.2
Providing and fixing precoated galvanised steel sheet roofing accessories 0.50 mm
(+0.05 %) total coated thickness, Zinc coating 120 grams per sqm as per IS: 277, in
240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester
top coat 15-18 microns using self drilling/ self tapping screwscomplete :Flashings /
Aprons (Upto 600 mm) | 23.75 | m | 517.71 | ₹12,295.61 |
| 10 | 12.50
Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of
corrugation as approved by Engineer-in-charge) 0.50 mm (+0.05%), total coated
thickness with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade,
5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18
microns. Sheet should have protective guard film of 25 microns minimum to avoid
scratches during transportation and should be supplied in single length upto 12 metre
or as desired by Engineer-in-charge. The sheet shall be fixed using self drilling/self
tapping screws of size (5.5x55mm) with EPDM seal, complete upto any pitch in
horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses
and including cutting to size and shape wherever required | 77.04 | sqm | 842.14 | ₹64,874.25 |
| 11 | 50.9.4.1
Providing and fixing paneling or paneling and glazing in paneled or paneled and
glazed shutters for doors, windows and clerestory windows (Area of opening for panel
inserts excluding portion inside grooves or rebates to be measured) paneling for
paneled or paneled and glazed shutters 25 mm to 40 mm thick using good quality
Anjili/ Jack wood | 5.47 | sqm | 2,879.52 | ₹15,745.22 |
stage.html
html • 0.03 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Tendernotice_1.pdf
PDF • 0.64 MB
Declaration.pdf
Other Document • 0.01 MB
BOQ_1470315.xls
BOQ • 0.28 MB
TD2.pdf
Tender Documents • 1.13 MB
e_payment.pdf
Other Document • 0.01 MB
preliminaryagreement.pdf
Other Document • 0.24 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .