Road works

Brick masonry 230 mm thick with CM (1:8) using Fly ash cement bricks of size 225x100x60 mm from approved source having crushing strength not less than 50kg/sqcm including cost and conveyance of all materials including all operational, incidental and labour charges such as mixing cement mortar, curing scafolding charges, constructing masonary, lift charges, curing etc., complete for finished item of work. For Ground floor

Plain Cement Concrete corresponding to M7.5 grade as per IS 456 equivalent to (1:4:8) proportion nominal mix (cement: fine aggregate: Coarse aggregate) using 40mm size HBG (SS5) metal from from approved quarry including cost and conveyance of all materials like cement, sand, coarse aggregate, water etc. to site, including seigniorage charges, sales & other taxes on all materials, all operational, incidental and labour charges such as mixing, laying, curing concrete, etc., complete for finished For Shelf Tops

Ornamental Plastering to ceiling 12mm thick in CM (1:3) with dubara sponge finishing including cost and conveyance of all materials like cement, sand, water, etc., to site, cost of seigniorage charges and all other taxes on all materials, and operational, incidental charges and all labour charges for mixing mortar, finishing, scaffolding, lift charges, curing, including cutting grooves etc. as directed by Engineer-in-charge, complete for finished item of work (APSS No. 901 & 904)

Plastering 12mm thick in two coats with base coat of 8mm thick in CM (1:6) and top coat of 4mm thick in CM (1:4) with dubara sponge finishing including cost and conveyance of all materials like cement, sand, water, etc., to site, cost of seigniorage charges and all other taxes on all materials, and operational, incidental charges and all labour charges for mixing mortar, finishing, scaffolding, lift charges, curing, including cutting grooves etc. as directed by Engineer-in-charge, complete for finished item of work (APSS No. 901 & 904) for Internal faces of walls

Plastering 12mm thick in two coats with base coat of 8mm thick in CM (1:6) and top coat of 4mm thick in CM (1:4) with dubara sponge finishing including cost and conveyance of all materials like cement, sand, water, etc., to site, cost of seigniorage charges and all other taxes on all materials, and operational, incidental charges and all labour charges for mixing mortar, finishing, scaffolding, lift charges, curing, including cutting grooves etc. as directed by Engineer-in-charge, complete for finished item of work (APSS No. 901 & 904) for External faces of walls

Providing and applying Synthetic Plaster Putty or Plaster of Paris putty or lime punning of average 1 to 2mm thickness over plastered surface to prepare the surface even and smooth after thoroughly brushing the surface to remove all dirt and remains of loose powdered materials, applying emery paper, Sand the surface, clean & wipe off loose dust, applying knifing paste filler by putty knife / muslin pad, air dry for 2 - 3 hrs, sand with 180 and 320 No., emery paper for the surface preparation incl Cost and Conveyance of all materials to work site and all operational, incidental, labour charges etc., Complete for finished item of work for Internal Walls

Providing and applying Synthetic Plaster Putty or Plaster of Paris putty or lime punning of average 2 to 3mm thickness over plastered surface to prepare the surface even and smooth after thoroughly brushing the surface to remove all dirt and remains of loose powdered materials, applying emery paper, Sand the surface, clean & wipe off loose dust, applying knifing paste filler by putty knife / muslin pad, air dry for 2 - 3 hrs, sand with 180 and 320 No., emery paper for the surface preparation incl Cost and Conveyance of all materials to work site and all operational, incidental, labour charges etc., Complete for finished item of work for External Walls

Painting to new walls with 2 coats of synthetic polymer luxury plastic emulsion paint of superior grade having VOC (Volatile Organic Compound) content less than 50 grams//lt of asian / berger / nerolac /salcoat /indocem or equivalent brand and dishade over a base coat in appropriate primer of approved brand, making 3 coats in all give an even shade after thoroughly brushing the surface to remove all dirt and remains of loose powdered materials,including cost and conveyance of all materials to work site and all operational ,incidental labour charges etc. complete for finished item of work as per SS 911 for internal walls

Painting to new walls with 2 coats of synthetic polymer luxury plastic emulsion paint of superior grade having VOC (Volatile Organic Compound) content less than 50 grams//lt of asian / berger / nerolac /salcoat /indocem or equivalent brand and dishade over a base coat in appropriate primer of approved brand, making 3 coats in all give an even shade after thoroughly brushing the surface to remove all dirt and remains of loose powdered materials,including cost and conveyance of all materials to work site and all operational ,incidental labour charges etc. complete for finished item of work as per SS 911 for external walls

Painting with Supply of ready mixed Synthetic Enamel paints in all shades Grade - I having VOC (Volatile Organic Compound ) content less than 50 grams/ liter - Two Coats - For New Iron Work over a coat of Red Oxide Primer Grade-1 making making 3 coats in all to give an even shade after thourughly brushing the surface to remove all dirt and remains of loose powdered materials, including cost and conveyance of all materials to work site and all operational, incidental, labour charges etc. complete for finished item of work as per SS 912 As per IS 1200 (Part 15): 1987 Coefficient 2 is used for Painting on MS Iron Grills Painting with Synthetic Enamel paints - Two Coats - For New Iron Work

Providing Iron grills for Ventilators including cost and conveyances and labour charges etc. Complete For Windows

Flooring with Telephone Black Granite 18-20 mm thick upto 2.43M 7 set over base coat of CM (1:8) over already laid CC bed / RCC Roof Slab, including neat cement slurry of honey like consistency spread @ 3.3 kgs per sqm. & Jointed with neat cement to full depth including cost of all materials like cement, sand, and water and flooring stones etc., complete, including seigniorage charges, labour charges for dressing of flooring stones etc., complete for finished item of work, but excluding the cost of conveyance of all materials. For Flooring

Flooring with Non-skid red or white full body Ceramic floor tiles of size 300 x 300 mm and thickness between 7-8 mm 1st quality conforming to IS:13711, IS:13712, IS:13630 (Parts 1 to 15) of any colour and finish in all shades and designs, set over base coat of cement mortar (1:8), 12 mm thick over CC bed already laid or RCC roof slab, including neat cement slurry of honey like consistency spread @ 3.3.kgs per sqm & jointed neatly with white cement paste to full depth mixed with pigment of matching shade, including cost of all materials like cement, sand water and tiles etc., complete, including seigniorage charges, etc., complete for finished item of work, but excluding the cost of conveyance of all materials. For Toilets

Flooring with Telephone Black Granite 18-20 mm thick upto 2.43M 7 set over base coat of CM (1:8) over already laid CC bed / RCC Roof Slab, including neat cement slurry of honey like consistency spread @ 3.3 kgs per sqm. & Jointed with neat cement to full depth including cost of all materials like cement, sand, and water and flooring stones etc., complete, including seigniorage charges, labour charges for dressing of flooring stones etc., complete for finished item of work, but excluding the cost of conveyance of all materials. For Flooring

Providing skirting to internal walls to 15 cm height/risers of steps with Double charged / multi charged stain free full body porcelain vitrified tiles with double layer pigment of Size 600 x 600 mm and thickness between 8-10 mm 1st quality conforming to IS:13711, IS:13712, IS:13630 (Parts 1 to 15) of any colour and finish in all shades and designs, set over base coat of CM (1:5) 12 mm thick with cement slurry of honey like consistency spread at the rate of 3.30 kgs per sqm and jointed with white cement paste mixed with pigment of matching shade to full depth, including cost of all materials like tiles, cement, sand and water etc., complete including seigniorage charges, etc., complete for finished item of work, but excluding the cost of conveyance of all materials

Daddoing to walls with glazed red or white full body ceramic wall tiles of Size 300 x 600 mm thickness 6 mm and 1st quality to IS:13711, IS:13712, IS:13630 (Parts 1 to 15) of any colour and finish in all shades and designs set over base coat of cement mortar (1:5), 12 mm thick including neat cement slurry of honey like consistency spread @ 3.3.kgs per sqm & jointed neatly with white cement paste to full depth mixed with pigment of matching shade, including cost of all materials like cement, sand water and tiles etc., complete, including seigniorage charges, etc., complete for finished item of work, but excluding the cost of conveyance of all materials.

Providing and fixing of top hung Ventilators made of pre-painted steel (Base steel as per IS 513 of 0.80 mm thick galvanized as per IS 277 with Zinc of 120 GSM), finish painted with a polyester paint of 60-65 microns thick and section for outer frame of 80 x 45 mm, centre mullion of 80 x 60 mm, section for shutter of 52 x 25 mm x 0.6 mm thick, outer frame and mullions to have rebate for glazed shutter with a provision for guard bars/grills and the sections cut to length metre joined with corner bracket, centre mullion fixed with mullion cap, 1 No. of High grade nylon latch handle, window stopper, 2 nos. of with MS Powder coated /SS ball bearing butt Hinges provided per shutter and windows fitted with 4 mm thick plain float glass with rubber gaskets including fixing the frames in concrete/masonry wall by means of self expanding screws, Including 10 mm Square guard bars with 6” (152.4mm) pitch etc., complete for finished item of work. Single fixed Louvers Ventilator size of 2’ 0” x 2’ 0” (609.6 x 609.6mm) outer frame box section size of 80 x 45mm - BMT-P.59

Supplying & fixing collapsible steel shutters with vertical, double channel of 20 x10x2 mm of 100 mm centre Bracers with flat iron 40x40x6 mm with 38 mm dia steel pulleys, the top, bottom and side vertical frames of the collapsible gate with 65x65mmx8mm MS Angle and middle guide rail at site height with 65mmx8mm MS flat for the pulleys to guide and fixed with locking arrangements, stoppers, handles, all accessories all fixtures and painted with one coat of approved steel primer etc., complete for finished item of work as per special spn 1105

Supply and fixing of SS Hand Railing 304 Grade with Top rail of 40mm Dia 1.8mm thick Pipe, Vertical Post of 40mm Dia 1.6mm thick Pipe and 3 rows of Horizontal rails of 20mm Dia Pipe fixed with base plate of 50mm dia and drilling of 40mm dia holes incl Cost and Conveyance of all materials to work site and all operational, incidental, labour charges etc., Complete for finished item of work

Supply of factory made of Double Skin Pass Galvanized Powder Coated Single Rebate Doorframe and single shutter/Double shutter for General applications made of Double Skin Pass Galvanized Sheet confirming to Base Steel as per IS 513 of ‘D’ Quality Galvanized as per IS 277 with Zinc coating of 120 GSM , Pure polyester Powder Coated Paint of 60-65Microns(DFT)Thick. Frame: Single rebate Door Frame of size 100 mm X 78 mm with 1.00 mm thick Double Skin Pass Galvanized sheet Roll formed into Closed Box Profile with Suitable lock-seam joints and proper stitching procedures having a Design Architrave of 20 mm width and accommodate a46 mm thick Door shutter and the sections cut to length , Miter joined with corner bracket and EPDM Gaskets using self- expanding Screws . The Door frames are filled with an infill material of Polyurethane foam (PUF) of Density 32 to 36 kg / m3. Groove in Door Frame shall be provided to hold EPDM Gasket so that the Door shutters shall rest on the EPDM Gasket when the Door shutters are closed. EPDM gasket makes the Door weather resistant. The door frame shall be provided with hinge jamb, lock jamb, head jamb and with Suitable Anchors per frame. Door frame Stiffeners for Hinge: Stiffener of Skin pass Galvanized Sheet of 3 mm thick shall be welded to the pressed angle from inner side of the Door Frame and shutter using projection welding / Fixing with Screws from Gasket groove. Stiffener plate shall be threaded to the required size of machine screw (M6 × 20 CSK) conforming to IS 1365, 2.2/1.8 mm joggling depth on a 3 mm hinge plate. Door Frame Stiffener of pressed ‘C’ channels and Skin pass Galvanized steel Sheet of thickness 1.60 mm and of sufficient width and length or 1.2 mm thick (Skin pass Galvanized steel Sheet) sheet of required width and height as per the iron mongery, shall be provided inside the Door frame at suitable places to fix fittings and fixtures, such as aldrop, tower bolt, sliding bolt, door stopper, door closer, etc, (Stiffeners only) Shutter : The Single Door Shutter shall be made of 0.8 mm thick Double Skin pass Galvanized Sheet formed and shall be of 46 mm thick fully flush, double skin door shell with Lock Seam joints at stile edges, top and bottom edge skins bent inwards in U shape filled with in- fill of Honeycomb Kraft Paper and coated with Pure polyester powder coating of thickness 60 – 65 microns, providing high levels of scratch resistance and durability, as per IS 4351 (2003),and IS 13871. Honey comb kraft paper : In-fill of Door shutter shall be with honey comb kraft paper of 16 mm cell size, 140 gsm, Core thickness of 44.5 mm, Humidity of 6 to 10 percent and compression strength 150/200 kpa at 23℃ and 130 ℃ respectively. The product shall conform to EMPHA and ISO standards. The skin panels of the door and Honeycomb Kraft Paper shall be bonded with GLUE. The glue shall comply with A2/IMO standards. Door shutter Stiffeners : Stiffener of pressed ‘C’ channels and Skin pass Galvanized steel Sheet of thickness 1.60 mm of sufficient width and length or 1.2 mm thick (Skin pass Galvanized steel Sheet) rectangular box cross sectional stiffener between the two skins of the door shutter (to the full inner thickness of the door shutter) of required width and height as per the iron mongery, shall be provided inside the shutter at suitable places to fix fittings and fixtures, such as aldrop, tower bolt, sliding bolt, door stopper, door closer, etc,. (stiffners only) The slots and holes shall be pierced into the Door Frame and shutter and necessary fixing arrangements shall be provided. Hardware and Accessories : 10” ‘D’Handle – 1 Pair., Ball Bearing Butt Hinges – 3 No’s, Mortise Lock / 10” Aldrop – 1 No., 6” Tower Bolt – 1 No., All Hardware and Screws Should be Stainless Steel 304 Grade. 128 The unit cost includes - loading, cost of conveyance, unloading

Providing and fixing factory made solid Wood Polymer Composite (WPC) single extruded Door Frame section of size with encapsulation of 8MM rigid layer on all the six surfaces. The door frame will have a rebat of 32MM. For Clinic

Supply and Fixing of 25mm dia 1.8mm thick P.V.C. pipe (ISI MARK) concealed in wall with all required accessories including masonary work for light, fan and separate plug point with well seasoned TW box including all labour charges etc., complete. Make : Sudhakar/ Maco Plast / Modi Electrical Items

Supplying & run of 2 of 2.5 Sqmm 36/0.3mmFR PVC insulated flexible copper cable in Existing pipe for mains including cost of all materials, all taxes, conveyance to site and all labour charges for all operations etc., complete as directed by Engineer in Charge

Supply and run of 4 of 56/0.3mm (4 Sq.mm) FR P.V.C. insulated flexible copper cable in existing pipe for Generator mains including cost of all materials, all taxes, conveyance to site and all labour charges for all operations etc., complete as directed by Engineer in Charge

Supply and run of 1 of 22 /0.3mm (1.5 Sq.mm) FR P.V.C. insulated flexible copper cable in existing pipe for earth continuity including all labour charges etc., complete.

Supply and run of 1 of 22 /0.3mm (1.5 Sq.mm) FR P.V.C. insulated flexible copper cable in existing pipe for earth continuity including all labour charges etc., complete.

Wiring with 2 runs of 14/0.3mm (1.0 Sq.mm) Fire Retardant (FR) P.V.C. insulated flexible copper cable (ISI MARK) in existing pipe with 6A switch, Ceiling rose and 3mm thick hylam sheet covering to switch control box including all labour charges etc., comp Make : Finolex / RR Kabel / KEI

Supply and Fixing of 16A 3pin and 6A 3pin plug socket with indicator lamp and 16A fuse unit and 16A switch control (5 in 1) duly recessed in wall with metal boxs, covered with modular cover frame including earth connections and all labour charges etc., complete.

Supply of Mini Modular Stepped type Electronic Regulator with Cover Frame for Ceiling fans 900/1200/1400mm sweep complete erected on existing board including cost of all materials, all taxes, conveyance to site and all labour charges etc., complete as directed by Engineer-in-Chief.

Supply & Fixing of 1200mm (48") sweep 230V, A.C 50 Hz. ceiling fan with 3 blades and double ball bearings with all standard accessories including cost of all materials, all taxes, conveyance to site and all labour charges for all operations etc., complete as directed by Engineer in Charge

Supply and Fixing of 18W/20W, not less than the 1100mm length LED batten light with extruded alluminium housing and polycarbonate cover, input voltage AC 220 - 260 Volts with PF>0.9, Surge protection: 2KV,THD<15%, with inbuilt driver and frosted cover CCT: 3000K - 5700K, minimum CRI>70, .etc., complete including fixing on wall / Ceiling with PVC/TW round blocks with all accessories including giving connections and all labour charges etc., complete.a) LUMINAIRE MAKE : Phillips / GE-Venture / Crompton / Wipro / Bajaj / Havells / Halonix/Jaquar/HPL/GM / GreenLites / Gold Medal/Eveready/ FortuneArrt/ Rhino/Panasonic b) LED MAKE : PHILIPS LUMILEDS / CREE / NICHIA / OSRAM / SAMSUNG/Everlight

Supply and fixing of batten holder / slanting holder in lieu of ceiling rose of light point complete with all connections and all labour charges with 40W bulb (for new installation).

Supply and fixing SPN Distribution board with IP-20 protection suitable for single phase Earth Leakage Circute Braker (ELCB) / Residual Current Circute Braker (RCCB) / Double Pole (DP) Isolator as incomer and 10kA SP MCBs as out going including internal connections and labour charges for surface / flush mounting etc., complete.

Supply and transportation of 30W LED Street light Luminaire made of pressure diecast alluminium body with powder coated, having protective toughned glass, Supply Input voltage 120 - 270 V AC, P.F > 0.90, high power LED's having System efficacy > 100 lm/W and junction temprature < 70°C, with Ingrees protection IP66, Luminaire performance complies to IS 10322 (Part 5 / Sec-3), Driver surge protection 4KV, In house additional Surge protection 10 KV with optics distribution , THD<10% at 110 Volts AC, driver efficiency >90%, CCT: 3000K - 5700K, minimum CRI>70, etc., complete. Makes : As per list of recommended brands as category I.

Suppllying and fixing Prince/Sudhakar or equivalent ISI make PVC SWR grade Pipes of type B class and specials like bends, Tee, Y-junction with or without door, Vent cowl, providing and fixing cleaning / rodding eye with endcap wherever required, etc., cutting the pipes, laying or fixing to perfect plumb, with slopes where required, making joints using solvent cement solution or with ring seal couplers of size available pipe of 110mm and 75mm dia., providing 110 dia PVC make up piece with inlet connections, providing and fixing G.I. U clamps to the brackets, Providing and removing necessary scaffolding where required, providing supports for pipes laid in false ceiling using G.I.hangers fixed to R.C.C slab including providing and fixing necessary anchor fastners and clamps, conducting water test for leak proof joints and the materials, etc., complete. 110mm dia 4kg/ sq.cm single socket upvc waste pipe SANITATION ITEMS

Supplying and fixing Indian make Flat Back Wash Hand Basin (HSW/Parryware/ Neycer) 1st quality conforming to IS:2556-Part-4:1972 of size 450mm x 300mm with 32 mm nominal size C.P. Fitting with parallel pipe thread conforming to IS:2963-1979 and fitted with 15 mm nominal bore Chromium Plated Pillar Tap of 1st quality Indian make 400 grams Seiko/Senior/Nice or equivalent complete with standard CI brackets including wooden blocks -Single C.P.Pillar Cock

Supply, Installation and commissioning approved make floor mounted close coupled EWC suit CASCADE model "P" or "S" trap with dual flush procelain cistern fixed on EWC with all internal parts of dual flush cistern, ultra solid seat cover of approved make with rubber buffer and cap 15mm angle stopcock 450 mm long PVC inter connection pipe wallflanges all of approved make etc., complete for finished item of work inall respects: White Colour.

Supply & fixing bib cock cum health faucet with 1 m long flexible tube and wall hook ofJaquar make queen series with 7 years warranty Chrome plated including cost & conveyance of all materials, labour charges for finished item of work, and all taxes complete for all floors

Supplying and fixing 4" (101.6 mm ) Floor Trap - UPVC/SWR Pipe fittings 1st quality ISI marked with C.P. Grating fixing with white cement as per site requirements with standard practice for all floors including cost and conveyance of all materials to site, labour charges etc., complete for finished item of work.

Supplying & fixing 15 mm bib tap with flange Chromeum plated Jaquar make queen series including cost and conveyance of all materials to site, labour charges etc., complete for finished item of work.

Supplying and fixing of stainless steel sink of size 914.4 mm x457.2mm, 1mm thick of Indian make fixed on cantilever brackets including supply and fixing 31.75mm C.P. waste coupling, 31.75 mm dia PVC flexible waste pipe of 914.4 mm length of Ist quality ncluding chiselling brick masonry wall and making good & restoring to original surfaces overheads & contractors profit complete.for finished item of work in all floors.

Providing and placing on terrace (at all floor levels) polyetheylene water storage tank with double layer approved brand and manufacture with cover and suitable locking arrangement and making necessary holes for inlet and outlets and over flow pipes but without fittings and base support for tanks including cost and conveyance of all materials and labour charges for placing and fixing in position as directed by Engineer-in-Charge.

Supply and Fixing of Premium make CPVC Pipes and Fittings to meet the requirement of ASTM-D 2846 and are produced in CTS (Copper Tube Sizes 1/2" ton 2" Ashirvad Flowgurard SDR 11 and SDR 13.5 pipes are made from idential CPVC compounds having the same physical Properties for Hot and Cold Water (IS 15778:2007) 28.60mm ODPipe - SDR 11

Supply and fixing of 110 mm dia ISI mark PVC rain water spouts of 4 Kg/cm2 pressure including Cost of necessary pvc bends, shoes and M.S.clamps and all other accessories and fixing in position including cost and conveyance of all materials to site , seigniorage charges sales and other taxes on all materials, all operational, incidental and labour cahrges such as fixing in alignment etc., complete for finished item of work 110 mm dia 4 Kgs/sqmm Rain water pipes