SPECIAL REPAIRS TO LIVING IN BILLETS AND ADDN / ALTN TO BLDG NO P-2005, P-2006, P-2007 AND P-2008 (36 SINGLE LIVING OFFRS ACCN) AND SEWAGE LINE NEAR BLDG NO T-30 AT AF STATION UNDER GE (AF) JAMNAGAR NO.2

Amount

Demolition of floor, hearth or wall tiling or stone slab laid, bedded & pointed in any mortar including demolition of cement mortar bedding or backing coat, including removal of debris to outside MOD land complete all as specified and directed.

M & L for 25 mm thick cement concrete 1:2:4 type B0 (using 12.5 mm graded aggregate) as in levelling course complete all as specified and directed.

M&L for Non - skid joint free coloured Ceramic tiles (1st quality) not less than 7 to 8 mm thick of size exc 0.06 sqm but n exc 0.11 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match tiles over & including 15mm screed bed or bedding in CM 1:6 complete all as specified and directed.

M&L for Non - skid joint free coloured Ceramic tiles (1st quality) not less than 7 to 8 mm thick tiles of size exc 0.11 sqm but n exc 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match tiles over & including 15mm screed bed or bedding in CM 1:6 complete all as specified and directed.

M&L for non - skid joint free coloured Ceramic tiles (1st quality) not less than 7 to 8 mm thick tiles of size exc 0.18 sqm but n exc 0.38 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match tiles over & including 15mm screed bed or bedding in CM 1:6 complete all as specified and directed.

M&L for Glazed ceramic tiles in vertical surface 300 x 450 x 7mm / 450 x 350 x 7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match slurry and pointed in white or coloured cement to match over and including 10 mm thick backing coat of mortar in CM 1:4 for laying wall tiles finishes complete all as specified.

Dismantling of kota stone slabs and granite tiles laid, bedded and pointed in any mortar of any description or thickness in floors, aprons cills or platform etc complete all as specified and directed.

M&L for Granite work 18 to 20 mm thick (table rubbed and polished) in steps, jambs, pillars, window cills, cooking platforms and like in cement mortar (1:4) including pointing in coloured cement (1:2) using marble dust with admixture of pigment to match with granite shade complete all as specified and directed.

M & L for granite (of any type) work 18 to 20mm (table rubbed and polished) for wall lining (veneering to wall) 12mm thick in cement mortar (1:3) and pointing with white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete all as specified and directed.

M & L for machine cut & machine polished kota stone slab 18 to 20 mm thick as in kitchen platform, treads of steps laid over and including 15 mm thick screed bed in CM 1:6, jointed with grey cement slurry mixed with colour pigment to match the shade of the slab, rubbing and polishing complete all as specified and directed.

M&L for 18-20mm thick machine cut kota stone slab in riser of steps, skirting,dado and pillar laid over cement mortar in 1:4 base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and directed.

M&L for rounding to edges of Granite/ Kota stone slabs edge, such as in steps cooking platform, and other similar situation.

Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and directed.

M & L for framed work such as grills, gratings, etc. with ends of bars shouldered and/or rivetted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work con- forming to Fe.290.Gde-E-165 complete all as specified and directed.

M&L for preparation of new steel or iron surfaces over 10 cm in width or girth and applying two coats of synthetic enamel paint over a coat of red oxide zinc chrome primer complete all as specified and directed.

Taking down chowkats or frame with shutter (with out taking off shutter from the frame) n.exc 1.5 Sqm complete all as specified and directed.

Supply fabricate & fix in position anodised aluminium powder coated (minimum thickness of powder coating 50 micron) three track window ( two shutters glazed ) with frame, glazed with 4 mm thick tinted glass and, wire gauge with stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.40 mm including rubber bead joining cleat for fixing in Member for wire gauge Section shall be 18.00 x 25.00 x 1.35 (Section No 20791). position, concealed type lock for all two shutter, PVC roller etc all as specified below, including taking down old window complete all as specified and directed. (a) Frame (top & side) section shall of size 92.00 x 31.75 x 1.50 mm (Section No 20831) (b) Frame (bottom) section shall of size 92.00 x 31.75 x 1.50 mm (Section No 20832) (c) Top & side Members of shutter Section shall be be of size 18.00 x 40.00 x 1.55 (Section No 20738) (d) Shutter Interlock Section shall be of size 18.00 x 40.00 x 1.45 (Section No 20737) (e) Bottom Members of shutter Section shall be of size 18.00 x 40.00 x 1.55 (Section No 20736) Note:- Section No given above are of make Jindal, Contractor may use similar section of other make mentioned in Appx B.

S & F in repairs 20 mm dia Curtain rails, mild steel, chromium plated with fixing brackets/concealed brackets & holders, stops, rollers etc. decorative type fitting complete all as specified and directed.

Taking down chowkats or frame with shutter (without taking off shutter from the frame) .exc 1.5 Sqm and n. exc 4.0 sqm area of each complete all as specified and directed.

S&F II nd class H.W Plain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints, supplied and fixed complete all as specified and directed.

S & F 30 mm thick II class HW Glazed and skeleton door shutters, open rebated and prepared to receive glass,gauze, etc. (without sash bars), edges of framing plain, chamfered orrounded. fitted with cut and mitred beads for securing glass, etc.; sizes of members of shutters complete all as specified and directed.

S & F 30mm thick Flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides complete all as specified and directed.

S & F Solid PVC Door Frame of size 50mmx47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, suppling & fixing in opening complete all as specified and directed.

S & F factory made solid panel PVC door shutter 30 mm thick (stiles) consisting of frame made out of MS tubes for top & bottom rails. MS frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20 mm width stuck inside with solvent coment for stiles and plain colour PVC sheets for top rail, lock rail and bottom rail on either side & as gap insert for top rail & bottom rail, panelling of plain colour PVC sheet to be fitted in the MS frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, including stainless steel butt hinges 100 mm long, Aluminium tower bolt tower bolt 100 mm long and Aluminium handle 150 mm long complete all as specified and directed.

S & F Stainless steel wire cloth. 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and directed.

M & L for 100mm long Butt hinges, medium weight, cold rolled, mild steel and fixed complete all as specified and directed.

S&F 150mm long aluminium anodised barrel tower bolt complete all as specified and directed.

S&F 150mm long aluminium handle fabricated type anodised complete all as specified and directed.

S&F 250mm x 16mm dia aluminium alloy anodised sliding door bolt with hasp and staple (bolt type) and fixing clips of steel cast or extruded section or cast aluminium alloy complete all as specified and directed.

S & F 140mm long Floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor complete all as specified and directed.

S&F 300 mm long MS ordinary rat tail rod pattern springs including roller and roller plate complete all as specified and directed.

S&F in repair white vitreous china wash hand basin of size 550 x 400 mm, fixed over & including MS brackets comprising of the following items:- (a) Waste fitting 32 mm dia brass chromium plated with long screwed shanks and fly nut, flange end, bedded in red lead cement and other end fixed complete. (b) 15 mm size Pillar tap fancy type cast copper alloy with capstan head, chromium plated screwed down high pressure with or without lettered hot or cold with long screwed shank and fly nut screwed for iron pipe complete . (c) LDPE/PVC waste pipe 32 mm dia 1000 mm long complete.

S&F in repairs Tubular towel rail, 20mm dia, D type, 60cm long between flanges complete all as specified and directed.

Taking down steel water tubing and connection 15mm bore and removal from site.

Supply and fix 15 mm outer dia CPVC pipes SDR 11 & plain CPVC SER 11 fittings, fixed on wall concealed or exposed / ceiling or laying in floors complete all as specified and directed. Note:- Cutting cheases wherever required will be measured & paid separately.

S&F PVC (SWR) pipes 75 mm dia single socketed, in any length, with rubber ring joints jointed with solvent cement, laid in trenches or in floors complete all as specified and directed.

S&F PVC (SWR) bends 75 mm dia complete all as specified and directed.

Demolition of brick work / stone work / PCC block masonry built in Cement mortar complete all as specified and directed.

M & L for pre-cast cement concrete block masonry with solid blocks, exc. 10 cm in width and setting in mortar 1:4 type C1 (1:3:6) 20mm graded aggreagate, complete all as specified and directed.

Taking down cement plaster in cement or cement lime mortar on brick or stone walls etc. including raking out joints, hacking for key, scrubbing down with water etc, including removal of debris to a distance exc 1.5 Km but n. exc 2 Km. complete all as specified and directed.

M&L for rendering 10 mm thick in CM 1:6 on fair faces of brick work or concrete surfaces and finish the surface even and smooth without using extra cement complete all as specified and directed.

M & L two coats of oil bound distemper on new plastered surfaces on wall including preparation of new plastered surfaces all as specified and as directed .

Excavating soft/loose soil in post holes (or similar holes) each n exc 0.5 cu. m, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm, complete all as specified and directed.

Removing excavated material n exc. 50m and depositing where directed at a level n exc. 1.5 m above the starting point complete all as specified and directed.

S & F hand rails, half round or other steel section or core for wooden hand-rail straight portion, drilled and countersunk for balusters running bars, for doors, balusters, nosing to steps including embeding in concrete and screwing etc. wind ties for roof including securing bolts posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc.; flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or rivetting, etc., and similar work conforming to Fe-290 Gde E-165 complete all as specified and directed.

S & F 5 to10mm mild steel screw bolts (machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, n exc 5cm long complete all as specified and directed.

S & F Mild steel bars 10mm dia and over (Fe-410 Gde-E-250), cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed.

Supply only MS galvanisd fencing, any size or type complete all as specified and directed.

Fixing only chain link fencing including line wires, any mesh, size and type to any type of standards, rails, straining bolts, etc. including provision of binding wire complete all as specified and directed.

S & F framed work as in gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering, doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete all as specified and directed.

M&L for two coats of cement base paint over a coat of alkali resistant primer on newly plastered surfaces of walls including preperation of new surfaces complete all as specified and directed.

Surface excavation n.exc 30 cm deep and averaging 15 cm deep and getting out in any type of soil complete all as specified and directed.

M&L for excavation in post holes (or similar holes) each n exc 0.50 cum getting out in hard/dense soil returning, filling in and ramming earth or broken rubble mixed with earth around in layers not exceeding 25cm, watering and removing surplus soil to a distance n exc 50m and making good the surface complete all as specified and directed.

Removing excavated soil material to a distance exc 250m but n.exc 500m and depositing where directed complete all as specified and directed.

M&L for cement concrete type B2, (1:2:4) (using 40 mm graded crushed stone aggregate) as in foundation, filling and mass concrete complete all as specified and directed.

M&L for PCC solid blocks masonry 1:3:6, 20mm graded stone aggregate, exc 10 cm in width and setting in CM 1:6 complete all as specified and directed.

M&L for rendering 10 mm thick in CM 1:4 on fair faces of brick work or concrete surfaces of wall complete all as specified and directed.

M&L for mild steel work as in posts or struts in fencing including cutting tops to shape as directed drilling holes, notching for wire etc flat iron fillets (for securing wire mesh etc) including all necessary bolting or rivetting etc and similar work confirming to Fe-290 Gde E-165 complete all as specified and directed.

S&F mild steel screw bolts (machine made) with hexagonal or square eads at one end and screwed the other to be fitted with washers and one hexagonal or square nuts, n exc 5 cm long diameter of neck 5 to 10 mm complete all as specified and directed.

Supply only chain link MS galvanised fencing, of Aperture 50 x 50 mm, conforming to IS 2721:2003 including line wires of 4 mm dia straining bolts, etc including provision of binding wire complete all as specified and directed.

Fixing only chain link fencing including lines wires, any mesh size and type to any type of standards, rails, straining bolts, etc including provision of binding wire complete all as specified and directed.

M&L for providing cement concrete type D-2, 1:4:8 (using 40 mm graded crushed stone aggregate) as in foundation, filling and mass concrete complete all as specified and directed.

M&L for steel work in tubular trusses including special shaped washer etc using ERW or induction butt welded tubes conforming to IS.1161-1998 grade St.-240 complete all as specified and directed.

S&F Fibre glass reinforced translucent corrugated sheeting of 2 mm thickness with two corrugations side lap fixed with coach screw and washer in roof, wall etc complete all as specified and directed.

Taking down Shutters of any description n exc 1 sqm each complete all as specified and directed.

S&F anodised aluminium window and ventilator shutter, sliding type without sash bars, aluminium sections weighing 0.55 Kg/m including necessary jointing cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, suitable anodised aluminium handle / locking arrangement and roller complete all as specified and directed. Note : Work is to be carried out on existing frame. Contractor to quote rate accordingly.

Excavating in trenches, n exc 1.5 m wide and n exc 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sq m on plan and n exc 1.5 m in depth and getting out in soft/loose soil complete all as specified and directed.

M&L for cement concrete (1:2:4) type B1 (using 20mm graded stone aggregate) as in coping, benching and like including weathering, slightly round or chamfered angles and throating as directed and including necessary use and waste of formwork complete all as specified and directed.

M &L Providing precast cement, but in landings, cover slabs (for man holes etc.) chullah hoods, chajjas, water troughs, mangers, shelves and similar articles with plain faces type B1 1:2:4 (20 mm graded aggregate) set in cement mortar 1:4 complete all as specified and directed.

M & L mild steel TMT bars 10mm dia and over,cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with theincluding mild steel wire (annealed) not less than 0.9mmdia or securing with clips quality conforming to complete all as specified and directed.

M&L for rendering 15 mm thick in CM 1:4 using on fair faces of brick work or concrete surfaces and finish the surface even and smooth without using extra cement all as specified and as directed.

Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm complete all as specified and directed.

M & L for hardcore broken stoneof gauge n exc. 63mm, deposited, spread and levelled in layers n exc. 15 cm thick, watered and rammed to a true surface complete all as specified and directed.

M & L for 100 mm thick cement concrete type D-2, 1:4:8 (using 40mm graded stone aggregate) complete all as specified and directed.

M & L for 25mm cement concrete type B-1, 1:2:4 (using 20mm graded stone aggregate) complete all as specified and directed.

S & F non - skid Ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match and pointed in white or coloured cemeent to match incl 15 mm screed bed in CM 1:4 complete all as specified and directed.

M&L for 200 mm bore reinforced concrete hume pipes, class NP2, laid and jointed with collars complete all as specified and directed.

M & L for PCC 1:4:8 type D-1 using 20 mm graded stone aggregate as in bedding including haunching & packing under and against the side of pipe 200 mm bore, after they are laid and tested complete all as specified and directed.

S & F n exc 4 kg welded steel wire fabric supplied and fixed complete to wood or steel members

Cutting into existing manholes in running sewage line for connecting new drains of 100 / 150 / 200 mm internal dia of pipe, making good to walling and rendering, cutting out branch channel, and as required complete all as specified and directed.

SIBS CONTRACTOR