Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | 1₹2.5 LAccepted-Finance 37 B PHASE 3 INDUSTRIAL ESTATE GANGYAL JAMMU | ₹2.5 L | 1 | Accepted-Finance Found Eligible |
| 2 | 2₹2.5 L+₹2,600 (1.06%)Accepted-Finance | ₹2.5 L+₹2,600 (1.06%) | 2 | Accepted-Finance Found Eligible |
| 3 | 3₹2.5 L+₹2,900 (1.18%)Accepted-Finance GANGYAL JAMMU | ₹2.5 L+₹2,900 (1.18%) | 3 | Accepted-Finance Found Eligible |
| Sl No | Description | Qty | Unit | M/S K S ENGG WORKS L1 | M/S UK MECH AND ELECT ENGG WORKS L2 | HITECH MECHNICALS L3 |
|---|---|---|---|---|---|---|
| 1.00 | Providing, Installation, Testing and Commissioning of 01No. DN750 (30-inch) Double-Arch NBR Rubber Expansion (R.E.) Joint with PN16 Flanged Ends in the rising main pipe of Pump Unit No. 01 & 02 at L.I.S. Rajal, along with allied works.
The job involves excavation from the bottom side of the rising main pipe at the proposed installation locations to provide adequate working space for installation/replacement of the Rubber Expansion JointsThe work includes dismantling and extraction of the existing nipple for temporary restoration by removing nuts and bolts from both flanges of the nipple with the help of manual labour and tripod stand. The scope further includes cutting and removal of old/worn-out 750 mm dia flanges using a gas cutter and providing, fitting, aligning, and welding of 02 No. new M.S. flanges suitable for DN750 (30-inch), PN16 pressure rating to the rising main pipe using super quality welding electrodes.The work further includes supplying, positioning, aligning and installing 01 No. DN750 (30-inch) Double-Arch NBR Rubber Expansion Joint with PN16 flanged ends, conforming to the existing sample and site requirements, with the help of manual labour and tripod stand. Necessary nuts, bolts, washers, gaskets and other accessories required to be replaced with new one for complete installation.The job complete includes the cost of Rubber Expansion Joints, M.S. flanges, nuts, bolts, gaskets, welding electrodes, consumables, transportation, loading/unloading, hire charges of welding set, gas cutter, tripod stand, tools and plants, and all skilled and semi-skilled labour required for handling, supporting and maintaining proper level and alignment of the delivery pipes during installation.The scope also includes testing, trial operation, commissioning of the installed Rubber Expansion Joints, rectification of any defects noticed during testing, site clearance, and handing over the system in satisfactory working condition complete in all respects. Complete Job | 1 | Job | 2,450 ₹2,42,550 Lowest | 2,476 ₹2,45,124 | 2,479 ₹2,45,421 |
Tender Value
₹2.5 L
EMD Value
₹4,960
Closing Date
3 Jul 2026, 2:00 pmClosed
Executive Engineer MID Akhnoor/Nowshera
Office of Executive Engineer MID Akhnoor/Nowshera
Providing, Installation, Testing and Commissioning of 750 mm diameter Rubber Expansion (R.E) Joint along with allied works at L.I.S Rajal
2026_IFC_313532_1
MID/AN/26
Open Tender
Machineries/ Mechanical Engg Items
Item Wise
15 days
Rajal
Please refer Tender documents.
7 documents required · 7 mandatory
₹200
Executive Engineer MID Akhnoor/Nowshera
₹4,960
Yes
Office of Executive Engineer MID Akhnoor/Nowshera
28 Jul 2026
24 Jun 2026
4 Jul 2026
24 Jun 2026
3 Jul 2026
27 Jun 2026
25 Jun 2026
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount |
|---|---|---|---|---|---|
| 1 | Providing, Installation, Testing and Commissioning of 01No. DN750 (30-inch) Double-Arch NBR Rubber Expansion (R.E.) Joint with PN16 Flanged Ends in the rising main pipe of Pump Unit No. 01 & 02 at L.I.S. Rajal, along with allied works.
The job involves excavation from the bottom side of the rising main pipe at the proposed installation locations to provide adequate working space for installation/replacement of the Rubber Expansion JointsThe work includes dismantling and extraction of the existing nipple for temporary restoration by removing nuts and bolts from both flanges of the nipple with the help of manual labour and tripod stand. The scope further includes cutting and removal of old/worn-out 750 mm dia flanges using a gas cutter and providing, fitting, aligning, and welding of 02 No. new M.S. flanges suitable for DN750 (30-inch), PN16 pressure rating to the rising main pipe using super quality welding electrodes.The work further includes supplying, positioning, aligning and installing 01 No. DN750 (30-inch) Double-Arch NBR Rubber Expansion Joint with PN16 flanged ends, conforming to the existing sample and site requirements, with the help of manual labour and tripod stand. Necessary nuts, bolts, washers, gaskets and other accessories required to be replaced with new one for complete installation.The job complete includes the cost of Rubber Expansion Joints, M.S. flanges, nuts, bolts, gaskets, welding electrodes, consumables, transportation, loading/unloading, hire charges of welding set, gas cutter, tripod stand, tools and plants, and all skilled and semi-skilled labour required for handling, supporting and maintaining proper level and alignment of the delivery pipes during installation.The scope also includes testing, trial operation, commissioning of the installed Rubber Expansion Joints, rectification of any defects noticed during testing, site clearance, and handing over the system in satisfactory working condition complete in all respects. Complete Job | 1 | Job | - | - |
stage.html
html • 0.04 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 0.56 MB
BOQ_1014944.xls
BOQ • 0.29 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .